We will be exhibiting at the 33rd Japan International Machine Tool Fair (JIMTOF).

Achieve powerful gripping force and zero lift! Adopts a jaw that swings 1.5° to one side. With a special mounting structure, the workpiece does not lift during tightening!

This is a self-centering vise that adopts a jaw with a 1.5° swing on one side, significantly improving grip strength. The jaws are designed for easy attachment and detachment, preventing workpieces from lifting during tightening. It features a "Zero Point System" compatible with LANG and HWR's 52 & 96 systems. Additionally, the main body includes grooves and clamp edges that allow for direct installation on the table. 【Self-Centering Vise Features】 ■ The jaws can be easily flipped 180 degrees for quick adjustment of the clamping range. ■ The adoption of a jaw that swings 1.5° on one side greatly enhances grip strength. ■ A special angle locking mechanism prevents workpieces from lifting. ■ Center repeat accuracy: 0.005mm. 【Zero Point System Features】 ■ Fully compatible with LANG and HWR's 52 & 96 systems. ■ Reduces setup time, center repeat accuracy: 0.005mm. ■ Mechanical type operated by screw tightening. 【Round Electromagnetic Chuck for 5-Axis Machining】 ■ Does not use clamps or similar devices. ■ Fixes workpieces directly with magnetic force, preventing scratches. ■ Chucking of workpieces is completed in a matter of seconds.

• Machining Center

We will provide a collection of successful cases of improved productivity for free! With Mag Vise, it is possible to shorten setup time and process multiple items simultaneously.

Amid rising various costs, there is a strong demand for reducing production costs. MagVice instantly clamps workpieces using magnetic force generated by lever operation or electricity. This significantly shortens the setup time, which is often time-consuming. Additionally, compared to traditional vises, it can clamp more workpieces, greatly improving processing efficiency and shortening delivery times. When hearing about clamping with magnets, there may be concerns about workpieces moving or chips adhering to the workpiece and interfering with cutting tools. However, if used correctly, there is absolutely no need for such worries. First, we have compiled a collection of processing examples as a MagVice processing case study. We would appreciate it if you could take a look. There is a link on this page for easy downloading. We also have various demo units available. We can bring them to customers for actual processing tests, free of charge. However, please prepare the machine and workpieces. Our sales team will carefully explain the properties of magnets and how to use them to process workpieces more efficiently and effectively.

• Chuck

Significant improvements in productivity through machining with an electromagnetic magnetic chuck that allows for simultaneous processing of multiple items and reduction of setup time! A collection of case studies is being offered!

The Magnet Vice [Mag Vice for Cutting with Permanent Electromagnetic Chuck] is a magnet chuck of the permanent electromagnetic type made from permanent magnets, specifically neodymium and alnico magnets. It utilizes the characteristics of alnico magnets to control the ON/OFF function with electrical power, resulting in a super-strong permanent magnet chuck. It has a proven track record in various cutting processes, including five-sided machining, simultaneous machining of multiple parts, cutting of large workpieces using gantry-type machining centers, removal of scale from workpieces, die-sinking machining, groove cutting of round steel, and mold machining! A collection of case studies is also available! 【Features】 ■ A magnetic force of 1000 kgf per four magnetic poles due to powerful neodymium and alnico magnets. ■ The strength of the magnetic force can be adjusted in eight levels using a controller. ■ No power supply is needed after excitation. It can maintain magnetic force for long periods without affecting precision. ■ The workpiece is held on one side due to magnetic attraction, making it suitable for five-sided machining. ■ Machining is completed in one operation, improving precision retention and machining efficiency. *For more details, please refer to the PDF document or feel free to contact us. We can also bring a demo unit for testing at your location.

• Grinding Machine

Ideal for clamping workpieces that require high precision! Suitable for surface grinding machines.

The "EEPG Series" is a permanent magnet grinding machine electromagnetic chuck that uses alnico magnets. No power supply is needed to maintain the magnetic force. Since it does not use power, the surface temperature does not rise, making it suitable for precision flat grinding operations. It is also energy-efficient. Additionally, it is possible to use multiple chucks in combination on large flat grinding machines and gantry-type flat grinding machines. 【Features】 ■ Power is only used during magnetization and demagnetization, resulting in very high energy-saving effects. ■ A resin-bonded structural face plate is applied to minimize environmental impact. ■ The demagnetization design ensures that no residual magnetism remains on the workpiece. ■ Strong and precise structural design, multi-layer waterproofing, excellent chuck strength, and waterproof performance. ■ Various magnetic pole pitches can be selected, making it suitable for workpieces of various sizes. *For more details, please refer to the PDF materials or feel free to contact us.

• Chuck

Significant improvement in productivity through machining with permanent magnet clamping blocks that allow simultaneous processing of five sides and reduction of setup time!

A permanent magnet clamping block is a powerful permanent magnet type magnetic chuck that can be used for cutting processes. 【Features】 ■ A cutting magnetic chuck that uses very strong neodymium magnets. ■ Easy ON/OFF control of magnetic force with lever operation. ■ The main body can be connected, allowing for handling of large workpieces. ■ By operating the magnetic force switching lever at the front of the connected body, you can control the ON/OFF of all connected magnetic forces. ■ Once the magnetic flux is fully engaged with the workpiece, the magnetic flux does not appear on the surface of the workpiece, preventing chips from being attracted to the surface due to magnetic force. ■ By using an induction block (magnetic flux conductor), it can accommodate various shapes of workpieces. ■ Using a distortion removal block, it is also possible to remove the scale from distorted workpieces. *For more details, please refer to the PDF document or feel free to contact us. We can also bring a demo unit to your location for test machining.

• Grinding Machine

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The wooden lightweight sheet "Hyper CLT Sheet," utilizing CLT (Cross Laminated Timber), is a sponsor of the Masters Koshien (Okayama). The Masters Koshien is where those who have experienced high school baseball come together across generations to pursue their goals once again. We resonate with their "attitude of continuing to challenge" and support their activities from Okayama. The Hyper CLT Sheet is a product created to provide a new option in civil engineering sites, which have primarily relied on steel sheets until now. It is lightweight, easy to handle, and features the environmental value unique to wood. Furthermore, it is registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A,"** aiming for widespread adoption in various sites, starting with public works. Wood, NETIS, civil engineering, CLT, wooden lightweight sheets. We will continue to support challenges in both the field and sports from Okayama. Masters Koshien (Okayama) https://masters-okayama.com/

Features: ● Intel Core Ultra (Series 2) processor LGA 1851 socket (CPU sold separately) ● DDR5 6400MT/s dual-channel support, CU/U-DIMM x2 (up to 128GB) (memory sold separately) ● M.2 M-Key x1, E-Key x1 ● USB 3.2 x4, USB 2.0 x8 ● Intel Ethernet Controller I226-V (2.5GbE) x2 ● SATA 6Gb/s x2 (supports RAID 0 / 1 / 5) ● PCI Express Gen5 x16 x1, PCI Express Gen4 x4 x1, PCI Express Gen4 x1 x1 * This model does not include memory, storage, or OS.

Features: ● Intel Core Ultra 200S series processor LGA 1851 socket (up to 125W) (CPU sold separately) ● DDR5 6400MT/s dual-channel compatible, CU-DIMM/U-DIMM x4 (up to 256GB) (sold separately) ● M.2 M-Key x2, E-Key x1, B-Key x1 ● USB 3.2 x8, USB 2.0 x6 ● 2.5GbE LAN x3 ● SATA 6Gb/s x2 (supports RAID 0 / 1 / 5) ● PCIe Gen5 x16 x1, PCIe Gen4 x4 x2, PCIe Gen4 x1 x1 ● Compatible with ATX power supply * This model does not include memory, storage, or OS.

Features: ● Supports Intel Core Ultra 200S series processors with Intel H810 chipset and LGA1851 socket (up to 125W) (CPU sold separately) ● DDR5 CSO-DIMM x2 (up to 128GB) (memory sold separately) ● 2.5GbE LAN x2 ● HDMI x2, DisplayPort x1, LVDS/eDP x1 (supports simultaneous output of up to 3 screens) ● SATA 6Gb/s x4, M.2 M-Key x1, M.2 E-Key x1, M.2 B-Key x1, PCI Express Gen5 x16 x1 ● USB 3.2 Gen2 x2, USB 2.0 x8, RS-232/422/485 x1, RS-232 x5 ● Compatible with ATX power supply * This model does not include memory, storage, or OS.