Notice of Participation in IPF Japan 2026

An innovative user interface combined with a capacitive multi-touch monitor achieves top-class efficiency and ease of use!

The Kissler ComoNeo is a process monitoring system designed to optimize, monitor, and document the plastic injection molding process. In addition to mold cavity pressure, it collects and evaluates signals from the injection molding machine (e.g., injection pressure, injection speed, screw position, etc.) as well as the mold surface temperature (connected via thermocouple temperature amplifier model 2205A...). －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • A "dashboard" screen displays relevant processing data consolidated into one screen. • The "EO Assistant" software allows for automatic creation and definition of monitoring boxes. • Simple and efficient hardware and software design due to a process-oriented operational concept. • Rapid mold changes and short setup times are possible with the automatic mold identification feature. • The built-in cycle history (data memory) can store up to 50,000 cycles. • Key process parameters necessary for monitoring and evaluating process stability are automatically calculated.

• Other processing machines
• Other measurement, recording and measuring instruments
• Other process controls

The 6157C series internal pressure sensors are best-selling products used worldwide.

The crystal piezoelectric sensor 6157C series measures the in-mold pressure of plastic injection molding up to a maximum of 2.00 bar. Since there is no diaphragm at the tip, it can be processed up to 0.5 mm to match the shape of the mold's inner surface, and the connection cable is replaceable.

• Other molds
• Pressure

A tip diameter of Φ2.5mm, simultaneously measuring resin pressure and mold surface temperature!

The 6189A series internal pressure and mold surface temperature measurement sensor (p-T sensor) can simultaneously measure resin pressure up to 2,000 bar and mold surface temperature in plastic injection molding.

• Pressure

A tip diameter of Φ1mm, simultaneously measuring resin pressure and mold surface temperature!

The p-T sensor 6188AA series for measuring internal pressure and mold surface temperature can simultaneously measure resin pressure up to 2,000 bar and mold surface temperature in plastic injection molding.

• Other temperature and humidity measuring instruments
• Pressure

Measuring the surface temperature of plastic injection molding molds!

The mold surface temperature sensor 6192B can share the mounting hole with the in-mold pressure sensor 6157B due to having the same tip diameter. The thermocouple integrated into the sensor features a very small thermal mass due to its special structure. As a result, it has superior responsiveness compared to standard sheath thermocouples. The robust steel mesh cable is designed for high temperatures. Please note that the tip of the standard type sensor cannot be processed. The F type can be processed down to a tip of 0.5mm. (Note: This is made to order.)

• Pressure

Measuring the surface temperature of plastic injection molding molds!

The mold surface temperature sensor 6194B can share the mounting hole with the in-mold pressure sensor 6159A due to having the same tip diameter. The thermocouple integrated into the sensor features a very small thermal mass due to its special structure. As a result, it has superior responsiveness compared to standard sheath thermocouples. The robust steel mesh cable, which is integrated, is designed for high temperatures. Please note that the tip of the standard type sensor cannot be processed. The F type can be processed down to a tip of 0.5mm. (Note: This will be made to order.)

• Pressure

Tip diameter Φ4mm, simultaneously measuring resin pressure and mold surface temperature!

The 6190CA series internal pressure and mold surface temperature measurement sensor (p-T sensor) can simultaneously measure resin pressure up to 2,000 bar and mold surface temperature in plastic injection molding.

• Pressure

A small sensor with a tip diameter of 1mm! Measuring the surface temperature of plastic injection molding molds!

The mold surface temperature sensor 6192B can share the mounting hole with the in-mold pressure sensor 6157B due to having the same tip diameter. The thermocouple integrated into the sensor features a very small thermal mass due to its special structure, which results in superior responsiveness compared to standard sheath thermocouples. The robust steel mesh cable is designed for high temperatures. Please note that the tip of the standard type sensor cannot be processed. The F type can be processed down to a tip of 0.5mm. (Note: This is made to order.)

• Pressure

Experience the turning point between success and failure, and update your thoughts and actions! Recommended for: - Those in charge of education related to human resource development - Those considering training programs related to team building and leadership ▼▼ Diversity and Team Building ▼▼ Date: September 19, 2025 (Friday) 15:00 - 17:00 Format: Online seminar via Zoom Capacity: 20 participants (first-come, first-served) Cost: Free Content: - Why team building is important - Characteristics of high-performing teams - Steps for team growth and the three essential elements ▼▼ Global Leadership Development ▼▼ Date: November 14, 2025 (Friday) 15:00 - 17:00 Format: Online seminar via Zoom Capacity: 20 participants (first-come, first-served) Cost: Free Content: - What global leadership is - Successful leaders vs. unsuccessful leaders - Three essential skills required for global leaders

[Speaker] Tatsu Nagai, Representative Employee of Go2Marketing (Co.) / Host of VSI AV Portal [Lecture Topics] 1. Understanding Robo-Taxis (1) Technology of Robo-Taxis (2) Safety of Robo-Taxis (3) Regulations for Robo-Taxis 2. Trends among Robo-Taxi Operators (1) Progress of Robo-Taxi Companies in the U.S.: Waymo, Zoox (2) Top 3 Robo-Taxi Companies in China (3) Other Robo-Taxi Companies 3. Challenges in Implementing Robo-Taxis (1) Implementation Process and Operational Rules (2) Necessity of ADS Data Regulations in Preparation for Accidents 4. Global Market for Robo-Taxis (1) Growth Forecast for the Robo-Taxi Market (2) Regional Growth Forecasts 5. Entry into the Japanese Robo-Taxi Market (1) Differences between the U.S. and Japan Ride-Hailing Markets (2) Scenarios for Entering the Japanese Robo-Taxi Market 6. Summary 7. Q&A

We are pleased to announce that we will be exhibiting at SEMICON Japan 2026 for the first time. Dates: December 9-11 Venue: Tokyo Big Sight, East Hall 7 Booth Location: E7971 Our force sensors, which utilize the piezoelectric effect of quartz, offer extremely high inherent frequency for fast response and high resolution to detect minute changes in force. This characteristic is well-suited for solving challenges in semiconductor manufacturing processes that require precise control. At our booth, we will conduct a demonstration of load measurement and showcase the benefits of introducing piezoelectric sensors. We invite you to visit us and feel free to stop by.

We will be exhibiting at IPF Japan 2026. Dates: December 1-5 Venue: Makuhari Messe, Exhibition Hall 3, Booth No. 31817 In recent years, higher quality assurance and traceability have been demanded in automotive parts, medical components, and electronic parts. At our booth, we will introduce sensing systems, including the visualization of injection molding quality and technologies for press-fitting and measurement, with a focus on real-time monitoring of the manufacturing process. As a highlight, we plan to showcase a demonstration linking ComoNeo with molding machines. Please experience quality management utilizing cavity pressure data at our booth.

Gunkyō Manufacturing Co., Ltd. will be exhibiting at "POWTEX 2026 International Powder Technology Exhibition" to be held at Tokyo Big Sight East Halls 1, 2, and 3 from November 25 to 27, 2026. At our booth, we will provide information about our cleaning and recycling services for dust collection filters, which are essential in the powder industry. Please check out our new option of "cleaning and reuse" that contributes to cost reduction while also supporting the SDGs.