(Full Capacity Registration Closed) Free Participation Fee | August 1, 2019 (Thursday) [Nova Advanced Cell Science Seminar 2019 - The Future Opened by Cultured Cells] Seminar with a luxurious lineup of speakers has been confirmed!

Presentation of verification materials for iPS cell culture: Simultaneous measurement and analysis of up to 16 items in 4 minutes and 30 seconds! Strong support for improving culture efficiency.

There is data indicating that "an appropriate culture medium environment correlates with an increase in cell numbers," which necessitates the creation and adjustment of an appropriate culture medium environment to promote efficient cell culture. Are you unable to execute this due to the "time required for measurement and analysis" being a bottleneck? The cell culture environment automatic analysis device 'BioProfile FLEX2' can analyze the components of cell culture media for up to 16 items in just 4.5 minutes. It allows for rapid quantification of culture conditions such as metabolism, proliferation, and differentiation, contributing to the establishment of a culture environment aimed at mass production. ★ We are currently offering materials that investigate the correlation between changes in medium components and cell numbers in iPS cell culture. 【Features】 ■ Simultaneous analysis of up to 16 items ■ Rapid measurement time: as short as 2 minutes, up to 4 minutes and 30 seconds (depending on measurement items) ■ Capable of measuring consumption and production rates of major metabolites ■ Compatible with multiple shapes of sample containers ■ Equipped with an auto-sampling function for continuous measurement of samples *For more details, please refer to the materials available for download in PDF format.

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

Presentation of Cell Culture Medium Analysis Explanation Materials: An analytical device capable of simultaneous measurement and analysis of up to 16 items in 4 minutes and 30 seconds! For creating appropriate culture environments and improving efficiency in compliance with GMP.

The "BioProfile FLEX2" is an automated analysis device for cell culture environments that can simultaneously analyze up to 16 components of cell culture media. In just 4.5 minutes, it quantifies culture conditions such as metabolism, proliferation, and differentiation, contributing to the efficiency of "continuity assessment of the cell manufacturing process," "creating a culture environment with an eye on mass production," and "quality control and documentation of standards in line with GMP compliance." It is equipped with sample containers of various shapes, requiring a small sample volume of 135 to 265 μL. For chemical substances and gas measurements, it uses sensor cards that do not require electrode maintenance. 【Features】 ■ Capable of simultaneous analysis of up to 16 items ■ Rapid measurement time: as short as 2 minutes and as long as 4 minutes and 30 seconds (depending on the measurement item) ■ Can measure the consumption and production rates of major metabolites 【Exhibition Information】 Name: BioJapan 2024 Venue: Pacifico Yokohama D-39 Date: October 9-11, 2024 Featured Products: Demonstration of "BioProfile FLEX2" and "BioProfile FAST CDV" media analysis! A 70% off campaign for "Stat Profile Prime" is currently underway! (Until the end of December) *Analysis explanation materials are currently available! Please check from "PDF Download."

• Other physicochemical equipment

An automatic analysis device for cell culture environments that achieves "shortened measurement time" and "significant reduction in sample volume"! All 16 items can be measured with just a small amount of sample.

The "BioProfile FLEX2" is an analytical device that utilizes micro-sensor technology. This technology allows the "BioProfile FLEX2" to achieve "reduced maintenance related to electrodes," "shortened measurement time," and "significantly reduced sample volume," making it an automatic analysis device for cell culture environments. It can measure all 16 parameters with a minimal sample volume, completing all 16 measurements in just 4 minutes and 30 seconds, or 2 minutes for individual modules. 【Features】 ■ Monitoring the progress of cell culture ■ Quantification of key components in the culture medium ■ Early detection of abnormalities through regular monitoring ■ Capability to measure multiple parameters with one device, consolidating the functions of multiple devices into one ■ Numerical backing for the timing of medium exchange *For more details, please request documentation or view the PDF data available for download.

• Other physicochemical equipment

Presentation of verification materials exploring the application to the evaluation of cell quality and experimental systems!

This document is a verification report that measures parameters in the culture supernatant during the maintenance culture of iPS cells and the differentiation induction process from iPS cells to dopamine-producing neural progenitor cells, exploring applications for evaluating cell quality and experimental systems. In addition to the experimental content and the composition of reagents and media, it discusses differentiation induction and maintenance culture. 【Contents】 ■ Purpose ■ Experimental Content ■ Reagents and Media Composition - Differentiation induction into neural progenitor cells - iPS cell culture ■ Discussion *For more details, please refer to the PDF document or feel free to contact us.

• others

A rapid, simple, and compact-sized analysis device! Providing cost-effective analysis.

The "Stat Profile Prime" is a cell culture medium analysis device that can measure a total of 9 items, including pH, PCO2, PO2, and Na+. Calibration and precision management are automatically performed to ensure that measurements of the 9 items can be conducted in approximately 1 minute at all times. Additionally, the Prime's individual cartridge system can be attached to the device immediately after opening, and the replacement process takes only a few seconds, maximizing the usable time of the analysis device. 【Features】 ■ Measurement of 9 items (pH, PCO2, PO2, Na+, K+, Cl, Ca+, Gluc, Lac) ■ Zero maintenance cartridge technology ■ High-speed throughput and small sample volumes ■ Automatic QC function *For more details, please refer to the PDF document or feel free to contact us.

• Other Culture
• Other analytical and testing equipment

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.