High pressure, low flow regulator - Low flow

Complies with strict specifications for sterilization processes and clean utility systems. Usable in a wide range of applications such as biopharmaceuticals, injectable solutions, cosmetics, dairy products, food, and beverages.

This sanitary valve complies with ASME BPE guidelines and can be widely used in clean utilities, sanitary processes, and sterile equipment. With high rangeability, excellent characteristic trim, and superior diaphragm, it establishes high capacity, high temperature, and high pressure, making it suitable for sterilization processes, buffers, WFI, acid measurement, clean gas, and steam services. This valve is the optimal product for controlling pressure, temperature, flow rate, and other variables. <Features> - Specially designed diaphragm seals and components ensure extremely high frequency and long-term use. - Jorlon diaphragm - capable of continuous operation under high-pressure steam - fully compatible with CIP and SIP. - Self-draining, meaning the angle body type is self-draining when installed vertically (full bore) or horizontally (except for 3 inches), but the inline type with 1 inch, 1-1.5 inches, and 2 inches horizontal E-type body has no self-draining capability. - No sliding parts in the wetted area, preventing particle generation. - Easy disassembly and assembly. For more details, please contact us or download the catalog.

• Flow Control
• Pressure Control
• Other process controls

3A certified. Finish of the wetted parts: 32Ra/0.8μm.

FB6903 is necessary to protect products from backflow. The valve remains open due to the forward flow of fluid. If the flow is interrupted, the plug is pressed against the seat by a spring, causing it to close due to backflow. This valve is used in many sanitary applications and is a 3A certified product in accordance with the 58-01 standard. <Specifications> - Connection diameter: 1/2" to 4" - Connection type: Sanitary clamp - Body style: 3-piece - Body material: 316SS - Seat material: EPDM or Viton - Metal surface finish: Wetted parts 32Ra/0.8μm or further treatment - Pressure rating @ room temperature: 0.966MPa - Industrial standards and testing: 3A certification - Cracking pressure for 1/2" and 3/4": < 0.069MPa - Cracking pressure for 1" to 4": < 0.035MPa *For more details, please contact us or download the catalog.

• Beverage Production Equipment
• Food environmental hygiene/contamination prevention equipment
• Food storage equipment and facilities

A pressure regulator specifically designed for sanitary processes, with materials and structure that meet the requirements of sanitary processes, providing excellent performance that is highly effective.

- The Steriflow Mk96 series uses 316L stainless steel for the wetted parts. - Surface treatment involves mechanical polishing followed by electropolishing. - Designed to have a structure without liquid pockets and to accommodate CIP/SIP. - This product is ideal for use in sanitary processes. - In addition to the stability of the set pressure, the shut-off characteristics can also achieve ANSI Class VI with optional features.

• Pressure Control

We supply various equipment including pressure regulators for sanitary piping systems, back pressure valves, steam traps, and check valves.

We offer the following equipment for use in sanitary process piping systems: ★ Pressure Regulators ★ Back Pressure Regulators ★ Control Valves ★ Ball Valves ★ Steam Traps ★ Check Valves, etc. <Applications and Achievements> These are used in the bypass systems of pumps or compressors in pharmaceutical, food, beverage, chemical, biotechnology, and semiconductor processes for primary pressure control. In addition to manual settings, there are also air pressure signal setting types available for remote operation. For more details, please contact us or download the catalog!

• Pressure Control

The Steriflow series offers a variety of control devices for sanitary processes. All products are specifically designed for sanitary process control.

★ Steriflow is the brand name of a series of sanitary products manufactured by Richards Industries. ★ The products include a variety of items such as pressure relief valves, back pressure valves, control valves, steam traps, check valves, sample cooling units, manual flow control valves, and sight glasses, all of which are available as catalog items. ★ As dedicated products for sanitary processes, they are made with appropriate materials and processing, and are designed to accommodate cleaning and sterilization processes. ★ They are designed for precise pressure control, flow control, and piping system maintenance specifically for sanitary processes, offering a range of products that excel in stability and reliability. << Achievements and Applications >> Used in clean processes for biopharmaceuticals, pharmaceuticals, food, cosmetics, and chemical products. There are many instances of using pressure relief valves and control valves for clean steam system control in sterilization equipment for WFI (Water for Injection). For over a decade, a pneumatic signal setting back pressure valve has been continuously adopted in the aseptic filling systems of food machinery manufacturers. !! For more details, please contact us or download the catalog !!

• valve

Back pressure regulator specifically for sanitary processes. The material and structure meet the requirements of sanitary processes and perform stable control.

The Steriflow Mk95 back pressure regulator is made of 316L stainless steel and is a product specifically designed for sanitary processes, featuring a structure without liquid accumulation and surface finishing, as well as compatibility with CIP/SIP. ★ It has a proven track record in pharmaceutical manufacturing processes, food, and chemical manufacturing processes. ★ Stable control performance. ★ When a simple diaphragm valve does not satisfy control requirements, and the use of an expensive control valve is hesitated, a self-operated back pressure regulator achieves both good control performance and cost reduction. <Track Record and Applications> It is used in the bypass system of pumps or compressors at the outlet in pharmaceutical, food, beverage, chemical, bio, and semiconductor processes for primary pressure control. In addition to manual setting, there is also an air pressure signal setting type, allowing for remote operation. For more details, please download the catalog or contact us.

• Pressure Control

The 708 series is a control valve specifically designed for small flow control. It offers 19 ranges from a minimum Cv of 0.00001 to a maximum of 4.0.

The Jordan 708 series is a compact control valve designed specifically for low flow rates. It has 19 Cv ranges from 0.00001 to 4.0, and is available in three connection sizes: 1/4”, 1/2”, and 3/4”. With a maximum pressure of 34.5 MPa and a maximum temperature of 482°C, it can accommodate a wide range of applications despite its small size. The wetted parts are made from various materials, including 316SS, allowing us to meet customer requirements. Features: • Rolling diaphragm - The rolling diaphragm design maintains a relatively constant effective area of the diaphragm regardless of the valve stem position. • Spring-loaded TFE/Chevron packing - The spring-loaded packing maintains moderate compression without causing excessive friction. • Bolt-connected body/bonnet - The bolted construction provides a robust structure for secure connections. • Guided trim - The extended orifice/plug guide improves shut-off capability and accuracy as standard (not available for Cv values below 0.05).

• Flow Control

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.