Updated the product page with some free samples available.

We provide support tailored to your requests and current situation, such as assistance with the institutionalization of the HACCP system!

We provide "Audit and Consulting (Support for the Institutionalization of HACCP)." Starting with a diagnosis of the current status regarding HACCP compliance, we offer support tailored to our customers' needs and situations, including assistance with obtaining JFS standards and JFS standard audits. "If you don't know how to respond to the institutionalization of HACCP" "I am worried whether our current facilities and equipment can comply with HACCP institutionalization" If you have such concerns, please contact us. 【Support for HACCP Institutionalization】 ■ Assistance with HACCP institutionalization - Diagnosis of the current status regarding HACCP compliance - Employee training on HACCP - Assistance in creating HACCP plans, etc. ■ Support for obtaining JFS standards ■ JFS standard audits ■ Contract testing related to food hygiene ■ Sale of testing kits *For more details, please refer to the PDF document or feel free to contact us.

• Audit/Accounting

A must-see for those without an environment for physical crushing work with beads! DNA extraction reagent kit for soil/fecal samples.

This product is a kit for extracting DNA from soil and fecal samples. It combines chemical lysis using surfactants with physical cell disruption through Beads Beating. The method employs a spin column equipped with a DNA recovery membrane, allowing for simple and rapid DNA extraction. 【Features】 ■ Combination of chemical lysis and physical cell disruption ■ Capable of extracting DNA from microorganisms with robust cell walls using Beads Beating ■ No need for nucleic acid preparation through ethanol precipitation, enabling simple and rapid DNA extraction *For more details, please refer to the PDF document or feel free to contact us.

• others

[Free samples available] Easy PCR can be performed due to the premix type!

This product is a 2× premix type PCR reagent. It contains Taq DNA Polymerase, dNTPs, Mg2+, etc., making it possible to perform PCR by simply adding template DNA and primer pairs. The Taq DNA Polymerase included in this product is designed for hot start PCR, preventing the amplification of products caused by misannealed primers during the temperature ramp-up process at the start of PCR. 【Features】 - High specificity PCR is possible due to optimized buffer composition. - As a premix type, it eliminates the need for complicated reagent preparation. - It has TdT activity, allowing PCR products to be used for TA cloning. *For more details, please refer to the PDF document or feel free to contact us.

• others

[Free samples available] Easily extract DNA from various samples in a short time!

This product is a reagent for easily extracting DNA from various samples such as blood, animal tissues, plants, bacteria, fungi, and food. It allows for DNA extraction in a short operation time of approximately 15 minutes. The obtained DNA solution can be used as a template for PCR and real-time PCR, among other applications. 【Features】 ■ Extraction possible in one tube ■ The process involves only heat treatment and centrifugation ■ Operation time is about 15 minutes ■ Extracted DNA can be used as a template for genetic testing *For more details, please refer to the PDF document or feel free to contact us.

• others

No need for complicated reagent preparation! 2× premix type reagents for real-time PCR.

This product is a 2× premix type reagent for real-time PCR. It contains heat-stable DNA polymerase, Mg2+, Passive Reference Dye, and optimized buffers necessary for real-time PCR (fluorescent probe method), allowing it to be used simply by adding template DNA, primer pairs, and probes. The heat-stable DNA polymerase included in this product is prepared for hot start PCR and is activated by a heat treatment of 95°C for 10 minutes. 【Features】 ■ Enables highly specific real-time PCR ■ No complicated reagent preparation required ■ Compatible with various real-time PCR devices (plate type) ■ Passive reference dye is pre-added ■ By adding UNG (Uracil-N-Glycosylase) separately, carryover prevention treatment is possible (UNG is not included in this product) *For more details, please refer to the PDF document or feel free to contact us.

• others

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.