"Heating furnace" up to 1800℃ / high-speed temperature rise and fall / temperature control performance [with observation video] not only for observation during heating but also as a heating furnace.

It is a compactly designed high-temperature heating observation device. It can be used on your microscope or micro-scope.

The IR-TPS is a high-temperature stage for microscopes that has been developed to achieve the contradictory goals of "high functionality and low cost." In addition to the standard configuration, advanced system equipment can be built with high-quality options. It can be used for research such as material analysis and quality control under precise temperature control in air, inert gas, or vacuum environments. 【Features】 ○ Uniform high-temperature heating of the sample at a speed of up to 1500°C within 60 seconds using infrared concentration ○ Energy-saving clean heating ○ Easy maintenance For more details, please contact us or refer to the catalog.

• Analytical Equipment and Devices

Opening up the material behavior under high-temperature stress of MAX1400℃ through in-situ micro-observation [CATY-T3H]

Real-time visualization of tensile and compressive behavior at ultra-high temperatures. In-situ observation enhances the accuracy and speed of high-temperature material development. Using an IR imaging furnace, it is possible to apply tensile or compressive loads while microscopically observing the surface state of the sample at high temperatures. This unique device allows for real-time observation of material behavior under high temperatures and stress. It is compact in size and can be used in various installation locations. 【Features】 - Dual swing crosshead: The specimen can be adjusted to a visible position. - Capable of high-speed heating up to 1400°C (depending on the shape and thermal capacity of the sample). - Flexible atmosphere: Vacuum chamber structure allows for stress measurement, low-cycle fatigue testing, and creep testing in gas flow or vacuum. - Realization of combined testing for thermal fatigue under stress and in-situ observation. 【Strongly supporting research and development of heat-resistant materials】 Experimental examples: Melting and solidification of metals and glass / Microstructural changes in metals / Sintering of ceramics, etc. Target materials: Metals / Semiconductors / Ceramics / Glass / Inorganic materials / Carbon, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Strength Testing Equipment

Real-time observation of ultra-high temperatures! A system that enables high-speed heating and cooling, allowing for the observation and recording of behavioral changes in real-time to fulfill your desire to see "now."

The high-temperature observation stage "IR-18SP" for microscopes is a product that allows for the heating observation of samples placed on a microscope stage. Despite its compact furnace body, it can achieve rapid heating from room temperature to 1500°C in just 30 seconds, and it enables ultra-high temperature heating up to a maximum temperature of 1800°C. 【Features】 ■ Capable of high-temperature heating up to 1800°C ■ Simple structure for easy maintenance ■ The furnace itself has a hermetic chamber structure, allowing heating in a free atmosphere ■ High-speed response enables precise temperature control ■ Allows for "in-situ observation" with microscopes, endoscopes, and laser microscopes ■ Capable of recording and analyzing videos linked to temperature ■ Compact and usable on a tabletop It is compatible with metal microscopes, endoscopes, laser microscopes, etc., and systems utilizing existing microscopes can also be proposed.

• Testing Equipment and Devices

【Compact tabletop model】Allows for multi-angle observation and filming of the behavior of molten solder during heating!

The "IR-HP-SP2" is a large heating observation device that allows for the observation and recording of the behavior of the solder material during heating. When equipped with a multi-camera system, it enables simultaneous observation from multiple directions and analysis of the behavior of the solder and flux linked to temperature. The furnace body is a tabletop model that can be installed on an experimental table. Additionally, it features a vacuum chamber structure, allowing for various vacuum gas replacements and experiments with gas flow, ensuring that flux gas does not leak externally, making it safe to use anywhere. 【Features】 ■ Airtight structure allows for flexible atmosphere control ■ Compact tabletop design enables clean heating and is suitable for any installation environment ■ On-site observation during heating at free angles ■ Flexible temperature control performance *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Maximum heating temperature 1400℃! For rapid heating of metals and ceramics, heating and cooling cycle testing.

The "IR-HP2-18" is a high-speed high-temperature heating device that supports non-contact heating up to 1400°C through the concentration and reflection of halogen lamp light. Using a high-power lamp while maintaining the standard IR-HP series furnace body, it significantly improves heating performance and maximum temperature. It comes standard with a large 100mm sample holder, accommodating sample sizes of Φ70mm. Due to its internally sealed structure, it can also handle heating in a vacuum or gas flow, making it suitable for rapid heating of ceramics and metals, as well as high-speed heating and cooling cycle tests. 【Features】 ■ Standard equipped with a large 100mm sample holder ■ Clean heating environment due to lamp heating method ■ Installation of observation window and video recording of heating state is possible ■ Automatic operation from vacuum to gas replacement and heating (optional) *You can view the product documentation for the series in PDF format.

• Heating device
• Testing Equipment and Devices
• Analytical Equipment and Devices

The state of the sample being heated can also be observed through the observation windows on the top and side! Automatic calculation of contact angles and wettability from image data is also possible! *Demo available now.

The "IR-HP" is a high-temperature observation device capable of heating up to 1300°C through focused heating of samples only. It comes standard with a large 100mm sample holder and features observation windows on both the top and side, allowing for the observation of the sample's state during heating from various angles. Additionally, through joint development with Nick Corporation, it has become possible to automatically calculate contact angles and wettability at high temperatures from image data! It measures the contact angle of solid materials when they become liquid at high temperatures, as well as changes in contact angles under high temperatures that differ from those at room temperature. *Free demos are currently available* (For those planning to purchase, we offer free demos for image verification.) 【Features】 ■ Capable of heating up to 1300°C through focused heating ■ Standard large 100mm sample holder ■ Observation windows installed on the top and side → The state of the sample during heating can be observed from the side (contact angle) and from above (wettability) ■ Uses an IR heating furnace that easily achieves high-temperature conditions ■ Measurements can be taken under controlled atmospheres such as air, inert gas, or vacuum *For more details, please contact us or download the PDF materials.*

• Heating device
• Testing Equipment and Devices
• Analytical Equipment and Devices

Infrared concentrated heating enables high-speed, high-temperature, and uniform heating. We will manufacture according to the customer's needs.

The "IR-FP Series" is a flat-type infrared heating furnace capable of heating up to 1100°C. It allows for output adjustment for each zone, enabling heating in various temperature environments. Clean heating is possible, along with vacuum compatibility, gas flow, and observation. It is ideal for heating silicon wafers, compound semiconductors, and thin steel plate processing. It can be used for applications involving heat resistance, deformation, and observation of resins, films, and adhesives. The furnace size can be adjusted according to the sample size. For more details, please contact us or refer to the catalog.

• Electric furnace
• Analytical Equipment and Devices

High-speed heating up to 1700℃ is possible, and it can also maintain that temperature!

The "IR-QP1-4" and "QP2-4" are high-temperature observation devices capable of heating up to 1700°C through focused heating of samples only. They achieve rapid heating of over 1000°C/min with a low power consumption of just 4kW (8kW) using a halogen heater. By incorporating an observation window, the state of the sample can be monitored during heating. With a compact size of 120W x 115H x 282 (382)L mm (excluding protrusions), it can heat without taking up much space. The sealed structure of the furnace allows for vacuum and gas replacement, enabling heating in a clean environment due to lamp heating. For more details, please contact us or download the catalog.

• Analytical Equipment and Devices

Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.

The "IR Series" (IR Series) of focusing heating furnaces manufactured by Yokokura Seisakusho, used by various research institutions around the world, is an IR image furnace that utilizes near-infrared focusing heating. It features a clean environmental structure that allows for ultra-fast heating and cooling. The product lineup includes the "IR-HP (6 Parabolic Radiation)," which dramatically expands the temperature distribution area compared to conventional heating furnaces with rapid heating and cooling from six directions; the "IR-QP (4 Elliptical Shared Focusing)," which offers double the temperature distribution area and rapid heating compared to conventional heating furnaces with rapid heating and cooling from four directions; and the "IR-TP (2 Elliptical Shared)," which enables microscopic observation compared to conventional heating furnaces with rapid heating and cooling from two directions. 【Main Features】 - Clean, energy-efficient, high performance - Vacuum and gas replacement + observation - High-speed heating with low power (1500°C in 30 seconds with only 4kW) - Heater uses tungsten filament with a high heating temperature of 3400K - Watt density is 10 to 20 times higher than nichrome heaters - Real-time temperature control available - Compact size For more details, please contact us or refer to the catalog.

• Electric furnace

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.