[Free Seminar on March 18 (Friday), also available via web streaming] Tube Manufacturer Edition: Selection of Piping Components, Basics ▶ Matching of Tubes and Fittings (Afternoon Session)

Piping fittings that achieve a balance of heat resistance, chemical resistance, lightweight, strength, and cost-effectiveness.

Antlock is a piping fitting designed to balance heat resistance, strength, chemical resistance, and cost-effectiveness, made from the super engineering plastic "PEEK." This Antlock utilizes the heat and chemical resistance characteristics of PEEK resin while incorporating carbon to further enhance strength. It adopts a simple and proven ferrule-less structure for connecting to tubes, ensuring reliable and speedy work. It is suitable for applications that previously used metal fittings such as stainless steel, providing weight reduction and rust prevention, as well as cost reduction in fields that used fluoropolymer fittings. 【Free sample distribution for the first 1,000 sets】 If you are interested, please contact us promptly using the form below. (Distribution will end once the quantity is reached.) <About the showroom> With the concept of "see," "touch," "compare," and "verify," we display approximately 3,000 items of plastic piping components. The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For access to the venue, please refer to the "Basic Information" section on the page.

• Pipe Fittings

Neatly secure the joint and tube in a space-saving manner.

This is a hose band made of plastic for soft tubes. The design, which tightens the tube's outer circumference evenly, ensures a snug fit between the fitting and the tube without gaps. Additionally, the innovative appearance, which reduces the cross-sectional area of the engagement part by approximately 40% compared to conventional products, allows for simplification and space-saving around the fittings. It is ideal for securing flexible tubes and fittings made of soft PVC, silicone, and various types of rubber. Features: ● Made entirely of flexible and strong nylon ● Uniformly tightens the fitting and tube ● Reduces installation space by approximately 40% (compared to conventional products) <About the Showroom> With the concept of "See," "Touch," "Compare," and "Confirm," we display around 3,000 items of plastic piping components. The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For venue access, please refer to the "Basic Information" section on the page.

• hose

Infinitely adjustable tightening and loosening.

This is a 66 nylon clamp for securing fittings and hoses. It allows for stepless adjustment of "tightening" and "loosening," ensuring that the hose is evenly pressed against the fitting with optimal fastening force. Unlike traditional metal clamps, it does not rust and contributes to the lightweight of the system. Features: ● Made entirely of flexible and strong nylon ● Ensures even contact between the fitting and hose with optimal fastening force ● Utilizes durable 66 nylon <About the Showroom> We have approximately 3,000 items of plastic piping components on display, based on the concept of "seeing," "touching," "comparing," and "confirming." The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are attending an exhibition, please feel free to stop by. *For venue access, please refer to the "Basic Information" section on the page.

• hose

Lightweight rust-free plastic hose clamp

The EJ hose band is an all-plastic hose band designed to secure tubes and fittings. It is mounted around the outer circumference of the tube inserted into the fitting, and by crimping both ends of the hose band with pliers or similar tools, it tightly and evenly compresses the tube. This prevents twisting of the tube, which can cause leaks, and allows for a uniform and gap-free tightening. It is available in sizes ranging from a minimum of 5.6φ to a maximum of 45φ, with a total of 16 sizes in the lineup. It is ideal for securing flexible tubes and fittings made of soft PVC, silicone, and various types of rubber. *Hose clamp, tube band, tube clamp*

• Pipe Fittings

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

Yazaki Energy System will be exhibiting at the "14th Agricultural WEEK (commonly known as J-AGRI)" held at Makuhari Messe. In response to challenges surrounding agriculture, such as record heat and soaring energy prices, our company proposes an agricultural system that utilizes surplus solar heat and waste heat from factories during the summer to support stable cultivation throughout the year, from winter heating to summer cooling. ■ Exhibition Details (Booth Number: 25-47) <Closed-type Agricultural House> Results from the second season and initiatives for the third season <Localized Cooling in Solar-Powered Agricultural Houses> Mechanism of substrate cooling, comparison of energy consumption with spatial cooling, growth conditions this summer <Cooling and Heating with Solar Heat> Examples of crown heating and house cooling, utilization of surplus heat in summer <Cooling of Crops and Workers with Well Water> Exhibition of a prototype well water cooler and proposals for the use of cooling jackets When you visit, please be sure to stop by our booth.

We would like to inform you about the autumn and winter internship opportunities for the 2028 graduates. 1. Open Company Dates: October 23, 2026 (Friday), November 11, 2026 (Wednesday), December 10, 2026 (Thursday), January 21, 2027 (Thursday) Time: 13:30 - 15:30 Location: Online (Microsoft Teams) 2. 1-Day Job Experience Dates: November 17, 2026 (Tuesday), December 16, 2026 (Wednesday) January 15, 2027 (Friday), January 27, 2027 (Wednesday), February 4, 2027 (Thursday), February 10, 2027 (Wednesday), February 18, 2027 (Thursday) Time: 10:00 - 17:30 (tentative) Location: Takaya Corporation Headquarters (661-1 Ibara-cho, Ibara City, Okayama Prefecture)

Notice of participation in the "FOOD Expo 2026." 【Date and Time】 　November 11 (Wednesday) - 13 (Friday), 2026 　Opening hours: 10:00 AM - 5:00 PM 【Venue】 　Tokyo Big Sight 　East Hall 2, Booth Number B-36 【Exhibits】 　Cardboard insulated boxes 　Craft cooler cubes 　Vacuum insulated panel 　Pallet cubes

[Lecture Topics] 1. Co-creation Strategy to Deliver AI to the Field - Business Development and Joint Ventures in the Era of Generative AI and Physical AI Mr. Haruto Suzuki, Industrial and Regional Research Department, Development Bank of Japan 1. The Mechanism of Generative AI and Its Current Utilization by Companies 2. Expansion of the Generative AI Market and AI Infrastructure 3. Transition from Generative AI to Physical AI 4. Bottlenecks in Social Implementation and Solutions through Joint Ventures 5. Formation of an Implementation Ecosystem through Policy and Finance 6. Q&A / Business Card Exchange 2. Needs, Development Trends, Future Possibilities, and Challenges of Physical AI Mr. Kazushi Asama, Senior Researcher, Next-Generation Robot Research Organization, Waseda University / Emeritus Professor, University of Tokyo 1. What Physical AI Means 2. Needs for Physical AI and the Technological Trends of Generative AI Behind It 3. Development Trends of Physical AI 4. Future Possibilities and Challenges of Physical AI 5. Q&A / Business Card Exchange