A must-see for those who have failed in automation polishing in the past! Challenge yourself with FerRobotics' high-speed autonomous correction technology for contact force! High-speed autonomous correction of contact force enhances processing quality and enables increased robot trajectory speed. It autonomously corrects gravitational loads and controls processing from any direction with uniform force, achieving high-quality and stable automatic polishing.

We will not leave 3K jobs to the next generation of children. We will eliminate the shortage of skilled workers. Robot polishing that gives robots human-like senses through high-speed autonomous correction control of contact force.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it quickly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly extending and retracting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the device or robot's trajectory, thereby enhancing processing speed and improving cycle time. Additionally, in robotic polishing and grinding, the ACF controls the contact pressure through the extension and retraction of its stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, it automatically corrects the tool load affected by gravity changes due to the robot's angle, ensuring a consistent contact pressure from any angle, enabling a finish without processing inconsistencies.

• Welding robot

An end effector that enables automation systems for high-speed processing and high-quality finishing of skilled techniques (polishing, grinding) and hazardous tasks that have been given up until now.

FerRobotics' Active Compliant Technology automatically compensates for the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it instantly adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly and automatically compensating through the extension and contraction of the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the equipment and robots' trajectories, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ability to control the contact pressure through the extension and contraction of the ACF itself eliminates the need to move the heavy robot arm for adjustments, further assisting in improving the processing speed of robotic polishing. Furthermore, since it automatically compensates for tool load changes due to gravity, which varies with the robot's angle, it ensures a consistent contact pressure from any angle, enabling a finish without processing inconsistencies.

• Casting Machine

Automation of the artisan's techniques (polishing, grinding) and hazardous tasks that have been given up until now, with high-speed autonomous control and contact force control. Dramatic improvements are expected in the end effector.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it quickly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by instantaneously extending and retracting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the equipment and the robot's trajectory, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ACF controls the contact pressure through the extension and retraction of its stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, since it automatically corrects the tool load affected by gravity changes due to the robot's angle, it maintains a uniform contact pressure from any angle, enabling a finish without processing inconsistencies.

• Articulated Robot

Freely automate various surface processing with a tool exchange system. The ultimate tool for robot polishing and deburring automation. Instant automatic pressure correction with a stroke of 35mm.

The ACF-K is a tool exchange unit that allows for easy attachment and detachment of hand tools such as angle grinders, belt sanders, orbital sanders, and die grinders. It enables simple automation with constant control of applied pressure, contributing to labor-saving in your company. FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during processing in grinding and polishing operations, which require skilled techniques, against dimensional tolerances, curved shapes, and non-flat surfaces at high speed. It also automatically compensates for gravitational loads, allowing for grinding and polishing operations to be performed with a consistently set applied pressure. This technology can increase the speed at which devices and robots move along their trajectories, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ACF itself controls the applied pressure by adjusting its stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, since it automatically compensates for tool load due to gravity, which varies with the angle of the robot, it maintains a uniform applied pressure from any angle, enabling a finish without processing inconsistencies.

• Machining Center

Dear Sir/Madam, I hope this message finds you well and thriving. I would like to express my sincere gratitude for your continued support. We would like to inform you that our company will be closed for summer vacation during the following period: ■ Summer Vacation Period From Saturday, August 8, 2026, to Sunday, August 16, 2026. We will resume normal operations on Monday, August 17, 2026. Inquiries received during the vacation period will be addressed sequentially after the start of business. We apologize for any inconvenience this may cause and appreciate your understanding.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!