Thank you for visiting Thermotech 2022!! June 1 (Wednesday) to June 3 (Friday), 2022 at Tokyo Big Sight.

Utilize waste heat at low cost! Energy-saving effects with a high-efficiency burner using preheated air! Introducing a gas burner with built-in heat exchanger for waste heat recovery.

The STBW burner is a heat recovery type burner equipped with a heat exchanger that collects combustion exhaust gases from around the gas burner combustion tube. Compared to regenerative burners and external heat exchangers, the STBW burner maintains a low initial cost while contributing to a quick return on investment with a fuel-saving efficiency of approximately 30%. By incorporating a simple heat-resistant heat exchanger, it features a low-cost structure that is less prone to clogging. The flame detection mechanism is integrated with the burner, allowing for a direct ignition method that does not require a pilot burner, resulting in excellent maintenance characteristics. 【Features】 - The price of the burner is significantly lower, offering excellent cost-effectiveness. - Self-exhaust gas recovery (recovery from the burner tip) - No need for a heat exchanger or waste heat recovery duct on the furnace side - Built-in heat exchanger made of heat-resistant metal - Excellent maintenance characteristics - Capable of high-load combustion in a sealed state *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment
• Heating device
• Industrial Furnace

Contributing to "energy conservation" in heating equipment! A rich lineup of surface combustion burners.

The "surface combustion burner" can be adjusted over a wide range from "infrared heating" to "blue flame heating." Custom-made designs are available to match the shapes of pots, kettles, and furnaces, including disc-shaped, cylindrical, conical, hemispherical, and concave types. Since electric heaters consume a large amount of power, utilizing "gas heaters" with ample power contributes to the "energy-saving" of thermal equipment. 【Features】 ■ A single surface burner can be adjusted over a wide range from infrared heating to blue flame heating. ■ Custom-made designs are available to match the shapes of pots, kettles, and furnaces. ■ Contributes to the "energy-saving" of thermal equipment. *For more details, please refer to the PDF document or feel free to contact us.

• Heating device
• Other heaters
• Industrial Furnace

Compact design allows for stable combustion and easy combustion adjustment! Maintenance is simple.

The "BJ-300, 400, 600" is a package-type gas burner developed for ovens as a large-capacity model. The air-gas control mechanism and ignition-detection mechanism are integrated into the main unit, resulting in a compact piping space. It features a fan that allows for combustion even in high-pressure environments inside the furnace, and a version for glass workshops is also available. 【Features】 ■ Compact design ■ Stable combustion ■ Wide turndown ratio ■ Easy combustion adjustment ■ Simple maintenance *For more details, please refer to the PDF materials or feel free to contact us.

• Drying Equipment
• Heating device
• Industrial Furnace

The synergistic effect of heat flow and infrared is demonstrated! Along with significant fuel efficiency improvement, it enables the sealing and insulation of the furnace.

The "Metal Knit Burner Package" achieves "high efficiency and high power" through the synergistic effect of controlled heat flow and infrared while minimizing unnecessary air! This is a proposal for a set of "originally designed burners and safety control devices" aimed at kitchen equipment and food machinery manufacturers. In pot and kettle heating, it is possible to intentionally set heating areas and balance, as well as achieve even surface heating. The combustion set with safety devices, known as the Pack Mixer, also realizes linear heat control. It can be equipped with convenience comparable to electric systems. 【Features】 ■ Contributes to improving the surrounding environment ■ Pot and kettle heating can be customized in various shapes with original designs ■ The Pack Mixer supports proportional control and programmed heating through electronic control ■ Original unit arrangements can be tailored to fit the space of pots and kettles ■ Assembly work at the factory can be completed in a short time, maintaining stable quality *For more details, please refer to the PDF materials or feel free to contact us.

• Food Processing Equipment
• Heating device
• Other heaters

An exhaust gas treatment device that achieves high energy efficiency and high decomposition rate! It features a compact design that saves space.

The direct combustion deodorization device "CH Series" is a system that completely oxidizes and decomposes odors and VOCs by passing them through at high temperatures of 700°C to 800°C for a certain period of time. It comes standard with a heat exchanger that preheats the odors and recovers about 50% of waste heat, contributing to energy savings. We offer various deodorization devices that effectively handle a wide range of odors, such as those from painting drying ovens, printing drying, and food processing. 【Features】 ■ High energy-saving effect ■ High deodorization efficiency ■ Excellent safety ■ Excellent durability ■ Compact design ■ Easy operation *For more details, please refer to the PDF materials or feel free to contact us.

• Other painting machines
• Heating device
• Industrial Furnace

We offer burners that achieve stable combustion over a wide range and have various shapes of combustion surfaces!

The "Metal Knit Burner" is a very unique surface combustion burner that uses a special heat-resistant metal fiber woven into a fabric-like material, which can be processed into burners with various shapes of combustion surfaces. The combustion has excellent followability, allowing for quick adjustments in flame intensity, much like adjusting the brightness of an electric lamp. The surface load ranges from 200 to 20,000 kW/m2, with a large turndown ratio, and the flame characteristics can be selected from infrared radiation mode to blue flame mode. 【Features】 ■ Stable combustion ■ Wide range of surface load and turndown ratio ■ Flame characteristics can be selected from infrared radiation mode to blue flame mode ■ Low NOx, low CO ■ Easy combustion adjustment *For more details, please refer to the PDF document or feel free to contact us.

• Heating device
• Other heaters
• Industrial Furnace

Features a high-speed curing system that enables improved coating film properties through combination heating.

We propose optimal high-speed and energy-saving systems, as well as deodorization devices and hanger processing furnaces, for various types of paints and products such as water-based paints, solvent-based paints, and powder coatings. Please bring the "paints and products you wish to test" to our "trolley conveyor type demonstration furnace" at our Horyuji Center. You can experience a hybrid high-speed curing that combines fuel-efficient gas types of "far infrared, near infrared, and hot air" with "electric lamps and heaters." [Contents] ■ High-speed curing system ■ Products from Shoei that are active in the painting industry ■ Combination heating ■ Deodorization devices ■ Processing furnace for hanger-attached paints *For more details, please refer to the PDF materials or feel free to contact us.

• Painting Machine
• Heating device
• Other surface treatment equipment

Metal knit for mold heating! It reduces damage to molds (local heating and oxidation)! Custom designs can be made to fit the mold shape, achieving uniform heating.

The "Metal Knit Burner," ideal for mold heating, eliminates excess combustion air and achieves "gentle yet high-speed heating for molds" through the synergistic effect of heat flow and infrared. Unlike conventional torch gas burners, it does not produce unnecessary flames, improving the surrounding environment and achieving significant energy savings. In the casting of automotive parts, which requires strict quality control, we can quickly and evenly heat the necessary parts of each mold, leading to feedback such as "no need for waste shots." We have a wealth of experience both domestically and internationally. We can design according to the shape of the mold, so please feel free to consult with us. 【Features】 ■ Combustion set with safety device = can be combined with a pack mixer for quick on-site installation ■ Can be made into a mobile unit, allowing the burner set to be used only when needed ■ Uses heat-resistant alloy fibers * For more details, please refer to the PDF document or feel free to contact us.

• Casting Machine
• Other processing machines
• Heating device

This is a mixed gas burner top with a safety device that controls it for optimal combustion! It can be customized according to the equipment and application.

The package mixer series is an all-in-one combustion system that can burn various premixed gas burners simply by connecting gas and electricity. Thanks to the one-touch volume adjustment, there is no need for complicated flame intensity adjustments. It supports a range of operations from ON-OFF combustion to high-level electronic proportional control. Additionally, it uses a DC fan for the combustion fan, allowing for fine adjustments and control. It is compactly equipped with combustion safety devices such as automatic ignition, flame detection, and combustion air pressure monitoring. Despite its small size, it is designed for full power and is highly effective in food factories! It serves as a great companion for metal knit burners used for mold preheating! The configuration of the combustion equipment can be customized according to the device and application. *Combustion tests and on-site demonstrations are also available. Please feel free to contact us. 【Features】 ■ Introduces an efficient combustion system to solve energy-saving challenges ■ A mixing unit with safety devices that control the premixed burner top for optimal combustion ■ Ideal for surface combustion burners such as metal knit burners ■ Can be set to the required flame intensity with one touch ■ Supports a range of operations from ON-OFF combustion to high-level electronic proportional control ■ Easy fuel conversion from oil burners with simple piping

• Drying Equipment
• Heating device
• Industrial Furnace

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.