【TAIYO】Featured in the Ipros Original Special Feature and Inspection Equipment Special Feature. 【Circuit Board Inspection System】Online exhibition of the circuit board inspection device 'Final Appearance Inspection and Power-On Test' is currently being held!

We won't miss any minor defects! We will combine according to your requests and propose equipment with specifications suitable for you.

The "M109SC" is a final appearance inspection device for printed circuit boards that accommodates larger-sized products. 【Effective inspection size: 300(W)×500(D)mm】 It employs a high-resolution camera that covers an imaging width at a high resolution of 5µm, and enables comfortable defect detection through a user-friendly inspection setting method. Detailed settings can be tailored to the complex inspection standards of each user. We will determine the inspection specifications according to your requirements and provide the best final appearance inspection system for you. 【Features】 ■ Large inspection stage × high-definition camera ☐ Reduces false positives and automates processes through integration with our unique AI system 'XAIS'! ■ Abundant options ■ Software suitable for products pursuing high quality ■ Detection capability that does not miss minor defects ■ Detailed settings can be customized according to the inspection standards of each product *For more details, please refer to the PDF materials or feel free to contact us. #PCBInspection #InspectionEquipment #AppearanceInspection #FinalAppearance #AI #AFVI #Inspection

• Visual Inspection Equipment
• Defect Inspection Equipment
• Circuit Board Inspection Equipment

Attention companies struggling with final appearance inspection of PCBs! The solution to your problem is "TY-VISION XAIS"! 【Final PCB Appearance + AI System】

Introducing the AI system for final appearance inspection of circuit boards, 'TY-VISION XAIS'. The defect information detected by the AVI (final appearance inspection device for circuit boards) 'TY-VISION' is automatically categorized into "good" and "needs confirmation" by the XAIS (AI system). Only the areas marked as "needs confirmation" received from XAIS are checked by the inspector for the final judgment. We solve the challenges of final appearance inspection before shipment, such as securing inspectors, labor costs, time spent on training, and inspection man-hours to prevent defective products from being shipped. 【Benefits of Implementation】 ■ Reduction of man-hours ■ Reduction of labor costs ■ Stabilization of inspection quality *For more details, please refer to the PDF document or feel free to contact us. #CircuitBoardInspection #InspectionEquipment #AppearanceInspection #FinalAppearance #Efficiency #LaborSaving #AVI #AVFI #Inspection #Defects #DefectDetection

• Visual Inspection Equipment
• Defect Inspection Equipment
• Circuit Board Inspection Equipment

High resolution, high functionality, high detection! The desired features are condensed into a specification adapted for package substrates, allowing for detailed settings to match the inspection standards of various companies!

The A307DC is an automatic final appearance inspection device capable of not only double-sided inspection but also single-sided inspection twice under different conditions. It comes standard with a clean roller, overlapping input detection function, and paper insertion/extraction function. By equipping it with an ID code reader, inspection results can be linked to the product during inspection and verification, making quality management easier. It features software suitable for products that pursue high quality, allowing for detailed settings to match complex inspection standards. 【Features】 ■ Our AI system 'XAIS' can be added, achieving labor-saving and efficiency! ■ Outstanding detection capability with abundant inspection settings ■ High traceability ■ Inspection software 'TY-LABINS' suitable for products that pursue high quality #CircuitBoardInspection #InspectionEquipment #AppearanceInspection #FinalAppearance #AFVI #AVI #AI #Inspection

• Visual Inspection Equipment
• Defect Inspection Equipment
• Circuit Board Inspection Equipment

A wide range of lineups based on the number of points! High-speed, high-precision inspection tester [continuity testing, insulation testing, four-terminal testing, micro-short detection].

The "Type E" is an electrical testing machine that achieves high-speed and high-precision inspections. It has a compact design that does not take up much space, allowing it to be placed on a desk. We offer a wide range of options to choose from based on inspection requirements, including the number of points, high-precision four-terminal testing, and micro-short testing. Additionally, it can be connected to hand presses or jigs that you may already own for use. 【Features】 ■ A tester that forms the core of the electrical testing system "TY-CHECKER series" ■ Compact design ■ Abundant options ■ Excellent versatility #BoardInspection #TestingEquipment #PowerOnTesting #ElectricalTesting #Continuity #Insulation #ShortCircuit #OpenCircuit #FourTerminal

• Circuit Board Inspection Equipment

The printed circuit board electrical testing machine can perform high-frequency testing automatically/semi-automatically (continuity testing, insulation testing, four-terminal testing, micro-short detection).

The "TY-CHECKER DS401 (AT)" is a powered inspection system that adds X-direction movement (horizontal movement) to the conventional Y-direction step and repeat transport. It supports both a unique dedicated plate holding method that does not apply tension and a tension holding method, allowing for selection based on the product. By swapping out the measurement section, high-frequency characteristic testing can be performed on sheets or individual pieces, achieving stable automatic/semi-automatic high-frequency inspection by leveraging the advantages of a fixed jig. 【Features】 ■ Step and repeat transport in the XY direction ■ Contributes to downsizing of jig head (reducing jig costs) ■ Selectable product holding methods ■ Compatible with high-frequency characteristic testing *For more details, please refer to the PDF materials or feel free to contact us. #CircuitBoardInspection #InspectionEquipment #PoweredInspection #ElectricalTesting #Continuity #Insulation #Open #Short #Leak #FourTerminal #Testing

• Other inspection equipment and devices

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.