A revolutionary spray system that allows for the thin film spraying of water-based materials and high to medium viscosity solvent-based adhesives without clogging or stringing, enabling selective partial application.
The newly developed FSCC06 Select Spray Gun can achieve stable film formation of 10 to 70 μm with low discharge amounts, particularly for water-based emulsion materials that are prone to clogging and medium-viscosity solvent-based materials, without any clogging or stringing. It is also capable of precise application of water-based materials with film thickness around 20 μm using a specified location coating method, which allows for a reduction in drying time comparable to that of solvent-based coating materials. This revolutionary spray system can form films without issues, even with materials that typically pose problems with foaming. (Utility model registered, patent obtained in South Korea) Additionally, it has been designed to apply solvent-based adhesives and moisture-proof insulating materials in their original form (approximately 200-500 CPS) without generating stringing (angel hair). Video → http://youtu.be/hIYDNrsM6QY
Inquire About This Product
basic information
The adoption of a newly developed nozzle mechanism has enabled stable micro-particle application of water-based coating materials, while also allowing for edge coating (patent pending). The existing water-based moisture-proof insulating materials have not been widely adopted in the substrate industry, where VOC compliance is required, due to issues such as splattering of the application liquid, foaming, and excessive drying time when applied using existing film coatings or air sprays. To address these problems, the FSCC06 Select Spray Coater was born. Water-based materials have been continuously cited as a solution for VOC-compliant materials that maintain the same quality and productivity as conventional solvent-based coatings, but progress had been slow due to the aforementioned issues. However, with the development of this new system, it is expected that the transition and repurposing of water-based materials will become more substantial, as it significantly contributes not only to quality maintenance but also to safety, health, and environmental improvements.
Price information
Please access http://shimadaappli.com/contact.html and make your inquiry.
Delivery Time
※Please access http://shimadaappli.com/contact.html and make your inquiry.
Applications/Examples of results
Application of water-based moisture-proof insulating agent to the implementation substrate. (Conformal coating with water-based materials) Striped application of various water-based emulsion materials, etc. Please visit http://shimadaappli.com/contact.html for inquiries.
Detailed information
-
Back side coating by lubber material of 400cps viscosity. Coating Condition Film thickness :On a board side in the case of 30 microns.
-
Shaped leg by cuter knife Coating material :ELEP COAT LSS520MH lubber material (400CPS) Coating style: Area coat by FSCC06 Selective spray coater. Component leg : the 2mm length from substrate face of PCB.
-
FSCC06 Selective Spray Coater Micro spray gun capable of selective coating
-
Coating of thin films with a width of 2 mm or less can be applied to uneven surfaces. This spray dispenser allows for easy thin film application on wavy or uneven surfaces with a narrow spray pattern width of 2 mm or less. It is a groundbreaking method that enables the formation of thin films with hard coating materials over 100 centipoise, which was not achievable with inkjet technology.
-
Marking with white paint of 1000 centipoise. Marking is possible with a spray pattern of 5mm width even with marking paint that has a viscosity of 1000 centipoise. It can be sprayed instantly without liquid clogging for bat marking or positioning marking. As shown in the photo, white paint is applied in one coat with a film thickness of over 25 microns, which is necessary for concealment.
-
FSCC06 Selective Spray Coater View of the valve body from the star-shaped air cap
-
Basic Principles of FSCC06 Selective Spray Coater This is a diagram illustrating the basic principles of the FSCC06 Selective Spray Coater.
catalog（1）
Download All Catalogs
CAD data（1）
| Model number | overview | File |
|---|---|---|
| FS type micro spray gun | The FS type micro spray gun has no tool, a decomposition assembly is easily possible for it, and cleaning and washing are easy for it. |
|
News about this product（4）
Company information
In 2011, Shimada Appli LLC was established in Saitama City as a development group that provides optimal coating and drying system solutions in response to the continuously changing industrial technologies and leading needs. Based on over 40 years of knowledge and experience in coating and drying technology, we launched Shimada Appli LLC to explore next-generation surface treatment technologies. With "Total Solution" as our fundamental philosophy, we are committed to delivering "true technology and solutions" to our customers by proposing new manufacturing and systems that contribute to high added value and resource-saving efficiency.