Exhibited at the 2016 Microelectronics Show organized by JIEP.

This is a spray gun capable of applying stable thin films of 50 nanometers or less with lines narrower than 2 mm.

The FSCC06 selective spray coater's application gun, which can be disassembled and assembled without the need for tools, is used in the coating field as an application valve capable of applying liquid materials with a viscosity of 1500 centipoise or less. By utilizing this valve and its screw extension, the micro spray EX valve atomizes the material into extremely fine particles, forming application patterns of less than 2 mm in width.

• Other mounting machines
• spray

A precision spray valve that can be easily disassembled and assembled without tools, making maintenance tasks such as cleaning and washing easy (patented in Japan, South Korea, Taiwan, and China).

This is a two-fluid spray gun that can be easily disassembled and assembled without tools, making maintenance tasks such as cleaning and washing easy. It features a needle valve section for turning the coating liquid ON/OFF and an air outlet section for atomizing the coating liquid.

• spray

Selective conformal coating for VOC. (Patent acquisition)

We developed that the coating valve improved in FS type micro spray gun of our company enabled selective coating to have fine edge definition with a thin film less than 50 microns in high density materials. This is suitable for the field of conformal coating industry of coating solvent less or water-based materials of the VOC type having high solid content with high viscosity. (Patent acquisition)

• Other mounting machines
• spray
• Other markings

Introducing the high-performance, versatile film coating gun with a sharp cutting edge, capable of fitting a 3mm nozzle! SA-type film coating gun.

This is a coating valve for a circulation-type coating liquid that can form a precise and high-speed film-like pattern without sedimentation, even with filler-containing materials under 100 CPS. It allows for stripe coating, limited coating, and even swirl spraying. Various nozzles for film coating are available, and in particular, the extension-type nozzle with a diameter of 3 mm is effective for coating narrow areas. (Utility model registered)

• Other mounting machines
• Painting Machine
• spray

Two methods of electrostatic micro-spray are prepared: one for forming thin film coatings using low viscosity materials, and the other for film formation using medium to high viscosity coating materials in the range of several tens of micrometers.

The electrostatic micro-spray for forming films with medium to high viscosity coating materials, which can create films several tens of microns thick, utilizes a screw extension and an air cap with a star-shaped design (patented) to finely atomize viscous materials into high microparticles. These particles are then charged in a corona charging area where electrostatic application occurs. Features: - Capable of thin film coating from 350 angstroms. - Reduction in the amount of coating liquid used. - Can coat three-dimensional complex shapes. - Good edge coverage.

• spray
• Other surface treatment equipment

A revolutionary spray system that allows for the thin film spraying of water-based materials and high to medium viscosity solvent-based adhesives without clogging or stringing, enabling selective partial application.

The newly developed FSCC06 Select Spray Gun can achieve stable film formation of 10 to 70 μm with low discharge amounts, particularly for water-based emulsion materials that are prone to clogging and medium-viscosity solvent-based materials, without any clogging or stringing. It is also capable of precise application of water-based materials with film thickness around 20 μm using a specified location coating method, which allows for a reduction in drying time comparable to that of solvent-based coating materials. This revolutionary spray system can form films without issues, even with materials that typically pose problems with foaming. (Utility model registered, patent obtained in South Korea) Additionally, it has been designed to apply solvent-based adhesives and moisture-proof insulating materials in their original form (approximately 200-500 CPS) without generating stringing (angel hair). Video → http://youtu.be/hIYDNrsM6QY

• Other mounting machines
• spray
• Other surface treatment equipment

FSCC07 Selective Spray Coater with instant automatic variable coating width.

This is a coating gun that can automatically change the application width from 1mm to 10mm instantly, designed for selective coating (patent pending). The FSCC07 selective spray coater features a coating valve that automatically adjusts the specified application width in conjunction with an automatic width adjustment device. By pre-setting the material viscosity, corresponding liquid pressure, desired application width, and other parameters, the system automatically selects the desired application width for each coated surface. The combination of the automatic width adjustment device and the FSCC07 valve is essential, and it works most effectively when matched with our table coater. Solvent-based adhesives and moisture-proof materials with a viscosity of 1000 centipoise can be applied in their concentrated form without dilution, significantly reducing drying time and preventing stringing. The liquid-contact part of the valve is designed for easy disassembly.

• spray
• Other markings

A table-type sprayer designed for small quantities and a variety of products, as well as a table coater suitable for spray and film coating.

This is a table-type coating device (table coater work cell) designed for small-batch, multi-variety applications in moisture-proof coating of implementation substrates, capable of continuous mid-coating in a constant speed range with simple image capture. It is easy to add a two-axis motion mechanism for rotation and tilt centered on the nozzle tip of the coating gun within the XYZ three-axis operating area (optional). Furthermore, it can also accommodate coatings of materials that require strict temperature management on the target substrate (optional). It enables precise spray coating or film coating at designated positions, allowing for uniform batch production coating. By equipping it with Shimada Appli's FS-type micro spray gun, micro spray gun for fine line coating, and high-speed film coating gun, it can accurately coat only the necessary areas, achieving maskless application. Additionally, the device structure allows for electrostatic coating with the installation of Shimada Appli's micro electrostatic spray gun.

• Painting Machine

We would like to introduce 'Slim 4' handled by FCR & Bio Co., Ltd. This product is a jacket tube with a rack lid lock and anti-rotation function (compatible capacity 4.1ml). It is autoclavable and suitable for DMSO and vapor phase of liquid nitrogen. Additionally, it features a screw cap that does not use O-rings, packing, or gaskets. 【Features】 ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Suitable for vapor phase of liquid nitrogen *For more details, please download the PDF or feel free to contact us.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.

For companies struggling with the retention rate of young employees in their 2nd to 3rd year This training focuses on growth and success experiences in professional life, aiming to enhance self-efficacy. At the same time, we will work on mindset to address anxieties, dissatisfaction, and frustrations, motivating participants to apply these insights to their future lives and work. Additionally, we will help them clarify their aspirations and action plans as senior employees, fostering self-awareness and increasing motivation. For more details, please refer to the product information.