If the pressure is the same, the water usage is 1/3; if the flow rate is the same, the pressure is 3 times; with a lower flow rate, there are repeated impacts. For removing slurry after mask and glass cleaning wafer polishing.
A cleaning nozzle unit that requires less water and is less likely to form a water film, which can be retrofitted to existing equipment. A cleaning nozzle that operates at a maximum of 30Hz. A pump that generates high-pressure water of 5 to 10 MPa. A combination of control units. Conventional continuous spraying applies pressure over a self-created water film, which tends to increase cleaning power = increase pressure = increase flow rate, resulting in a thicker water film. However, the DP-Gun uses intermittent spraying, which results in a lower flow rate at the same pressure (impact), making it less likely to form a water film and allowing the sprayed water to directly impact the target object. By repeatedly applying intermittent spray impacts, it demonstrates excellent cleaning effects for removing foreign substances from the items being cleaned, cleaning masks, and cleaning three-dimensional objects such as cassettes (with narrow grooves and intricate shapes). The pump unit achieves stable water pressure control with minimal water waste during pressure adjustments by performing feedback control in accordance with flow rate changes caused by the opening and closing of the nozzle. *Please consult us regarding the spraying of a fixed amount of liquid and spray application measurement. *Regular maintenance of the nozzle and pump is required.
Inquire About This Product
basic information
【Reference Specifications】 ■DP-Gun 1 unit ・ Main body ・ Nozzle tip, standard cleaning width approximately 110mm or approximately 65mm *1 ■Pump Unit 1 set ・ Pump *1 ・ Control unit (built-in driver for 2 DP-Guns) ・ Operation panel ・ External control compatible (start, stop, alarm output, etc.) ■Setting Items 1. Pressure (supply pressure 2–10MPa) 2. Frequency (spray frequency 5–30Hz) 3. Pulse width (spray opening time 5–15ms) *1 The shape of the nozzle tip and pump capacity will be discussed separately based on the purpose of cleaning, required flow rate, and the number of DP-Guns installed. ■Others We can propose solutions according to your needs, including DP-Gun mounting brackets, cleaning tanks, moving stages, drying with spin or air knives, and integration with other cleaning methods (ultrasonic, chemical, etc.). * The photo shows an image of multiple DP-Guns connected and our demo unit (with mounting bracket and simple cleaning tank).
Price range
Delivery Time
Applications/Examples of results
【Applications】 ■ Cleaning various masks - Used as a roller transport device - Standalone use (handgun method) ■ Cleaning chip trays - High-pressure pulse jet → US cleaning → Oven drying ■ Cleaning device for seed glass using roller transport - Brush → High-pressure pulse jet → Rinse → Air knife drying ■ Cleaning of three-dimensional objects such as wafer cassettes, carriers, carrier cassettes, and chip trays - Cleaning inner and outer surfaces in combination with a multi-joint robot (automating manual work) ■ Strengthening the cleaning power of existing lines - Addition to part of the cleaning tank of existing cleaning devices - Replacement of existing cleaning devices' two-fluid spray
catalog（1）
Download All Catalogs
Company information
The company name was chosen to signify the creation of highly unique products with the aim of "EXTENSIVE VISION ON SYSTEM." Current technological innovations are remarkable, and the demands of the times are constantly becoming more advanced. We believe that it is our mission at Zebios to contribute to the industry by consistently proposing differentiated equipment that will revolutionize the now-mature equipment industry.