The UVL-115 ultraviolet linear irradiation device is an irradiator that uses rod-shaped ultraviolet lamps. When used in combination, it can provide surface irradiation.
Features of UVL-115 The UV linear irradiation device UVL-115 uses a rod-shaped ultraviolet lamp. 1) It has a slim housing that incorporates an inverter stabilizer. It can emit ultraviolet light simply by supplying 100V. 2) It has a strong sterilizing effect. The 253.7nm-8W lamp has a median wavelength of 253.7nm (transparent color), with an output of 2.5W in the UVC range. It also emits a slight amount of blue-violet and green light. 3) It has a fast startup time, allowing for reduced heating time. It reaches 80% output in 2 seconds. 4) It achieves perfect clean heating, making it possible to heat in clean rooms and under vacuum. It can be used in vacuum containers. When placed in a vacuum chamber, there may be a slight gas release from inorganic adhesives initially, so pre-vacuum treatment is necessary. 5) It can be used in an array for surface irradiation. When used in an array, it can irradiate a wide area. 6) Polycarbonate can generally block ultraviolet light. Polycarbonate has a transmittance of 0% for wavelengths of 200-300nm (UVC) and a transmittance of 0.2% for wavelengths of 300-380nm (UVA).
Inquire About This Product
basic information
Model: UVL-115 Voltage: AC100V Rated Power: 8W Overall Length: 312mm Overall Width: 115mm Overall Height: 65mm Ultraviolet Frequency: 253.7nm and 354nm Ultraviolet Output: 2.5W and 0.80W 1m Ultraviolet Radiation Intensity: 27μW/cm2 and 8.8μW/cm2 Design Life: 4000 hours and 2000 hours
Price range
Delivery Time
Applications/Examples of results
Irradiation of ultraviolet curing resin Tire cracking test Photocatalyst test UV-cut glass transmittance test Accelerated weather resistance test of color steel sheets Comparative test by partial sterilization of culture medium Weather resistance test of resin plates Weather resistance test of coatings Drying of UV printing Reading of transparent UV ink Ultraviolet weeding effect Ultraviolet surface modification of resin substrates Ultraviolet (UV) cleaning of glass lenses Synthesis of vitamin D by ultraviolet irradiation Ultraviolet fluorescence method for sulfur dioxide Light source for total protein quantification method using spectrophotometry Quantification of uranium ore by ultraviolet fluorescence method Light source for thin-layer chromatography
Detailed information
-
Irradiation of UV-curable resin Issues There was a demand for shortening the curing time of the resin. ⇒ Improvement Points The curing speed was increased, allowing for a reduction in working time. Since it does not cure without UV irradiation, there were fewer constraints in the application process. Furthermore, low-temperature curing became possible.
-
Tire Crack Test Issues A small ultraviolet lamp was needed to conduct the tire crack test. ⇒ Improvement Points A halogen point heater was used to heat precision parts to high temperatures. Since it can heat to high temperatures in a pinpoint manner, the dynamic characteristics in high-temperature environments could be measured. Being compact allowed for flexible installation of the equipment. Furthermore, as it is a non-contact heating method, errors due to contact were eliminated.
-
Accelerated Weather Resistance Test for Color Steel Sheets Issues I wanted to conduct accelerated light tests in the laboratory. ⇒ Points for Improvement Ultraviolet lamps were used to irradiate the color steel sheets. Since the wattage can be adjusted, multi-stage data could be collected. Moreover, it is compact, allowing for tabletop testing.
-
Weather resistance test of resin boards Issues We wanted to conduct accelerated weather resistance tests in the laboratory. ⇒ Points for improvement We irradiated the resin boards with UV lamps. Since the wattage can be adjusted, we were able to obtain multi-stage data. Moreover, it is compact, allowing for tabletop testing.
-
Drying of UV Printing Issues There was a demand for reducing the drying time of prints. ⇒ Points of Improvement The drying speed increased, allowing for a reduction in work time. The strength of the cover improved, making scuff marks less noticeable. Additionally, low-temperature drying became possible, reducing warping and distortion.
-
Reading of transparent UV ink Issues I wanted to print information on the product for crisis management. ⇒ Improvement Points Printed with UV ink. It is inconspicuous, so there was no need to change the package design. The accuracy of crisis management has improved.
-
Ultraviolet Weeding Effect Issues There was a demand for a low-cost and permanent weeding effect. ⇒ Improvement Points Ultraviolet lamps were briefly exposed to the plants. Research was conducted to prevent the growth and reproduction of weeds. The wattage could be adjusted, allowing for multi-layered data collection. Moreover, being compact allowed for flexible installation of the equipment.
-
UV surface modification of resin substrates Issues The printing with the inkjet printer did not go well. ⇒ Improvement points The substrate was exposed to UV light for a short period. Wettability improved, and the inkjet printing quality improved.
-
Ultraviolet (UV) Cleaning of Glass Lenses Issues There was a demand for continuous and dry processes in cleaning. ⇒ Points of Improvement Ultraviolet light was briefly irradiated onto the glass lenses. The active oxygen generated from ozone produced by the UV light decomposed and transformed organic contaminants into volatile substances for removal. This achieved high quality that was difficult with conventional solvents or ultrasonic cleaning. Additionally, the processing time became faster.
catalog（1）
Download All Catalogs
Company information
5 reasons that HEATTECH is selected 1. The rich selection of 5 principles and 71 types. Air Blow heater , Near-infrared, Middle-infrared, Far-infrared, and UV heater From the 71 types of products based on the 5 principles of heating system, we will propose the best heater. 2. 9 series 88 types of heater controllers． Manual, Automatic, Speed proportional, Remote control, IOT compliant, Noncontact heating control, One-shot heating, Multistage heating, etc. We propose the optimal heater controller from the multifunctional products. 3. Construction method study materials We have published a number of technical documentation online seminars. 4. Sense of security of verification before introduction. Test piece, test laboratory, in user can verify before introduction. 5. Low-budget one-stop introduction To introduce in testing way, the laboratory kit which gathered something necessary was prepared. : Member of the Kobe Chamber of Commerce and Industry : Member of the Society of Material Science Japan : Member of the Society of Thermophysical Properties Japan : Member of the Japan External Trade Organization Trade Tie-up Promotion Program
