WEL-TEN780, a high-strength steel plate with a tensile strength of 780 MPa, reduces material thickness and weight.
WEL-TEN780 | High-tensile steel plate made in Japan
For designers who want to reduce the weight of crane booms and construction machinery parts. With a tensile strength of 780 MPa, we specifically consider thickness reduction while maintaining the necessary strength.
WEL-TEN780 is a high-tensile steel plate for welded structures made by Nippon Steel. The designation 780 indicates the grade of tensile strength, not the yield point value. The applicable plate thickness ranges from 6 to 100 mm. For thicknesses of 50 mm or less, a yield point or strength of 685 N/mm² or higher and a tensile strength of 780 to 930 N/mm² are specified. 【Recommended for the following concerns】 - Increased weight of components due to strength requirements - Reduced load capacity when increasing plate thickness - Unclear meaning of 780 and strength limits
Inquire About This Product
Related Videos
basic information
<Reasons for Selection> - Yield strength of 685 N/mm² or higher - Tensile strength of 780 to 930 N/mm² - Elongation of 16% or more specified For thicknesses over 50mm, the yield point or yield strength must be 665 N/mm² or higher, and tensile strength must be between 760 and 910 N/mm². Elongation is 16% or more for thicknesses of 16mm or less, tested with a JIS No. 5 specimen. Kumagai Special Steel handles a series that includes WEL-TEN780E, and consultations are available for cutting, drilling, bending, welding, and fabrication. For stock and processing conditions of WEL-TEN780, please contact us with your drawings and plate thickness.
Price range
Delivery Time
P3
※Approximately one week. However, please note that the delivery time may be extended depending on the lot and processing difficulty, so be sure to contact our company, Kumagai Special Steel.
Applications/Examples of results
Crane booms, aerial work platforms, construction machinery, and high-load components of industrial machinery are suitable for welded structures where you want to maintain strength while reducing weight. When trying to secure the necessary strength with ordinary steel or 590N/mm² grade steel, the plate thickness increases, affecting the burden on the rotating parts, vehicle weight, and load capacity, which may lead to considering a switch to WEL-TEN780. Pressure vessels, heavy oil and crude oil tanks, penstocks, bridges, and steel frames are also applicable fields for the WEL-TEN series. When switching, it is necessary to confirm the design not only based on tensile strength but also considering rigidity, buckling, fatigue, weld joints, and bending radius. For bending tests, a radius of 1.5 times the thickness (1.5t) is specified for plates up to 32mm thick, and 2.0 times the thickness (2.0t) for those over 32mm, both requiring a 180° bend. For high-strength steel, managing welding materials, preheating, heat input, and interpass temperature is crucial. In areas where wear is dominant, compare including wear-resistant steel plates, and confirm which of WEL-TEN780, 780E, 780RE, or 780EX to specify at the drawing stage.
Line up（1）
| Model number | overview |
|---|---|
| WEL-TEN780 | Made in Japan Steel High Tensile Steel Plate | - Yield strength of 685 N/mm² or higher - Tensile strength of 780 to 930 N/mm² - Elongation of 16% or more is specified For thicknesses over 50 mm, the yield point or strength must be 665 N/mm² or higher, with tensile strength of 760 to 910 N/mm². Elongation is 16% or more for thicknesses of 16 mm or less, using JIS No. 5 test specimens. The series including WEL-TEN780E can be consulted for cutting, drilling, bending, welding, and fabrication. For stock and processing conditions of WEL-TEN780, please contact Kumagai with the drawings! |
catalog（3）
Download All Catalogs
Company information
**Expanding Our Global Steel Business!** We support both **CIF and EX Works (EXW)** terms. **Delivering Japanese Specialty Steel to the World.** Since our establishment in 1913, we have been a specialized trading company of special steel for nearly a century, listening to the needs of many customers and building an ideal relationship between customers and steel manufacturers as a conductor of steel distribution. As a trading company with various processing equipment, including cutting machines and laser cutting machines, we also contribute to reducing our customers' capital investment. Please feel free to contact us if you have any requests.
