List of consumables products

For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.

• Work gloves

We will introduce a case where the service life of cutting oil was extended to more than twice, reducing waste liquid treatment costs and labor expenses!

• Cutting Oil

We will introduce a case where reviewing the defoaming performance of the coolant has eliminated overflow even when the tank is filled to capacity!

• Cutting Oil

Introducing a case where issues with rust formation and overflow caused by cleaning agents foaming have been eliminated!

• Cleaning agents

We will introduce a case where the need for paid cleaning through outsourcing has been eliminated, achieving a total cost reduction of 1/10!

• Cleaning agents

We will introduce a case where we successfully reduced electricity usage by about 8% while performing our usual operations!

• Lubricants

Selected a rust preventive oil with excellent washability! A case where plating has become cleaner than before.

• Rust Inhibitor
• Cutting Oil

Reduced labor and costs associated with post-processing cleaning! The range of materials that can be processed has expanded.

• Cutting Oil

The amount of dirt entering the rust prevention oil has decreased, allowing us to extend the replacement cycle of the rust prevention oil!

• Cutting Oil

Production efficiency improves without compromising rust prevention effectiveness! Usage can be reduced to approximately one-third.

• Rust Inhibitor
• Cutting Oil

The surface accuracy has improved to the point that it is visibly noticeable! It contributes to increased production efficiency from many aspects.

• Cutting Oil

Achieving satisfactory processing accuracy and tool life! A case where a lubricant compliant with REACH regulations was found.

• Cutting Oil

We will introduce a case that achieved more than double the mold life compared to the current cutting oil!

• Cutting Oil

Introduction of a special alkaline cleaning agent! It demonstrates removal effectiveness even against stubborn, caked-on dirt.

• Cleaning agents

Developed a dedicated oil for Category 4 petroleum! The mist that floats in the factory during the opening and closing of machine windows has also decreased.

• Cutting Oil

A case where an environment was created that operators could use with peace of mind, which also led to improved production efficiency.

• Ultrasonic Cleaner
• Cleaning agents

No irritating odors from kerosene, light oil, organic solvents, etc.! Exceptional ease of use to meet various needs.

• Rust Inhibitor

Odor improvement! A very easy and highly effective cutting and grinding fluid, a solution for decay prevention.

• Cleaning agents

One bottle for oil stains on equipment! No need for double wiping, safe, and powerful cleaner.

• Cleaning agents

We will introduce a case where the oil mist visibly decreased, significantly reducing the adherence and stickiness to workers' hair and clothing!

• Cutting Oil

We will introduce a case where the separation of the sliding surface oil improved, leading to an increased recovery rate of the oil skimmer, resulting in reduced odors and the elimination of stickines...

• Cutting Oil

We will introduce a case where the work time per machine, which used to take 2 hours, has been reduced to 1 hour!

• Cutting Oil

Introducing a case where the foul odor at the site has disappeared, resulting in a clean working environment!

• Cutting Oil

We will introduce a case where, even after more than a year since the liquid was changed, no mold or scum has occurred, and the cleaning power has been maintained!

• Cleaning agents

This leads to a significant improvement in production efficiency, keeping the machining room and windows of the machines in a clean condition.

• Cutting Oil

There are white stains on the processed surface! There were no defects due to discoloration or stains, and difficult-to-cut materials were processed without any issues.

• Cutting Oil

Reduction of time and costs spent on rust removal! An example of improved production efficiency.

• Rust Inhibitor
• Cutting Oil

A warp has occurred in the product! Here is an introduction to a case where the warp issue was resolved and power consumption was also reduced.

• Cutting Oil

The whetstone is clogged, causing burns on the product! Even after three years since its introduction, it remains a clear, transparent liquid.

• Cutting Oil

Mold life extended! A case where the burden on operators was reduced and machine downtime was also minimized.

• Cutting Oil

The reduction of stickiness around the machinery has made it less slippery when walking, improving safety!

• Cutting Oil

Mist reduction! The cutting oil in the tank is less likely to decrease, and the amount of coolant used is also reduced.

• Cutting Oil

Contributes to reducing the working environment and usage through low mist generation! Enables reliable oil supply to processing points.

• Cutting Oil

It can be used without issues such as corrosion or rough hands, and the oil smoke generated during processing is significantly reduced!

• Cutting Oil

High-heat resistance tape can be used up to 350 °C. It is suitable for temporary fixing of electronic parts manufacturing process.

• Other polymer materials
• Other consumables

Introducing Nye products, the optimal solution for semiconductor manufacturing equipment and semiconductor factories!

• Lubricants

Available worldwide! CASSIDA lubricants meet the highest safety standards and cover a wide range of the food industry.

• Lubricants

Corrosion prevention and permeation prevention against gas and chemical substances! Corrosion-resistant coating materials.

• Coating Agent

A manufacturer of Teflon coating materials processed in the optimal way. We excel in non-stick properties, water repellency, and sliding properties, and our Teflon coatings also have high heat resista...

• Coating Agent

Prevention of sticking for sticky materials such as molten plastic, labels, adhesive tape, and raw rubber. This series exhibits excellent non-stick and release properties!

• Coating Agent

A fluorine coating with excellent release properties that hardly sticks to duct tape! It solves problems in food transport lines and resin film manufacturing lines.

• Coating Agent

PFAS-free corrosion-resistant coating! It can be used for corrosion prevention and permeation prevention against gases and chemicals.

• Coating Agent

A fluorine coating with excellent release properties that hardly sticks to duct tape! It solves problems in food transport lines and resin film manufacturing lines.

• Coating Agent

Nano Process (R) TLS-200 allows for non-stick coating while maintaining high surface precision with a thin film coating of approximately 1μm.

• Coating Agent

Challenges in the manufacturing site: Improving the slip resistance of external medication containers!

• Coating Agent

It has the property of repelling water and oil well, even when they are on the surface! It is also resistant to cold and can withstand low temperatures of -250°C.

• Coating Agent

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be processed on chemical wood and plastic as well.

• Coating Agent

Just by sticking it on, you can easily obtain the effects of fluororesin.

• Adhesive tape

Excellent heat resistance, the tape surface is highly slippery, and the release effect is outstanding! Just stick it on for easy fluorine effect. It can also be applied to plastic and rubber surfaces.

• Adhesive tape

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be processed on chemical wood and plastic as well.

• Coating Agent

All coatings are of the room temperature curing type, and it is expected that the durability of the 3D printer production jigs can be improved to the level of mass production jigs.

• Coating Agent

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be applied to chemical wood and plastic as well.

• Coating Agent

Coating technology that can be processed at room temperature / Corrosion-resistant coating materials

• Coating Agent

[Data Presentation] All are room temperature curing types, so they can be coated on 3D printed products. It will be possible to switch from machined products.

• Coating Agent

PFAS-free abrasion-resistant resin coating! All types are processed at room temperature, and they can be applied not only to metals but also to chemical wood and plastics.

• Coating Agent

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be processed on chemical wood and plastic as well.

• Coating Agent

Wear-resistant coating without PFAS! All types are processed at room temperature, and can be applied to metals, as well as chemical wood and plastics.

• Coating Agent

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be processed on chemical wood and plastic as well.

• Coating Agent

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are of the room temperature curing type.

• Coating Agent