List of Inspection Equipment and Devices products
- classification：Inspection Equipment and Devices
316～360 item / All 8174 items
Achieves high collection efficiency through electrostatic methods. Offers a wide range of products from large to small sizes. Also compatible with water-soluble oil mist.
- air conditioning
Streamlining inspection operations in equipment maintenance and achieving automation of inspection reports.
- Other inspection equipment and devices
- Other electronic measuring instruments
- Other measurement, recording and measuring instruments
Support for the efficiency of safety inspections, automation of inspection form creation.
- Other inspection equipment and devices
- Other electronic measuring instruments
- Other measurement, recording and measuring instruments
Support for the efficiency of inspection records. A customizable inspection sheet system.
- Other inspection equipment and devices
- Other electronic measuring instruments
- Other measurement, recording and measuring instruments
Multilinear image quality meter for evaluating the sharpness and resolution of digital X-ray images.
- Radiation detector
- Other inspection equipment and devices
Ideal penetrant testing mock test pieces for non-destructive testing PT Level 2 practical exam preparation.
- Other inspection equipment and devices
- Testing Equipment and Devices
Start of sales for the immersion testing practical exam mock test piece "PT Level 2 Post-Emulsification Fluorescent Penetrant Test" - November 21, 2025.
NDT Mart & Rental Co., Ltd. began selling the new product PT Level 2 T-shaped pipe joint simulation test piece 'PT-TSCT2' on November 21, 2025. ◆ PT Level 2 Post-Emulsifiable Fluorescent Penetrant Testing Practical Test Simulation Piece 'PT-TSCT2' 'PT-TSCT2' is an ideal simulation test piece for practical test preparation for Penetrant Testing (PT) Level 2. It is designed in the shape of a T-shaped pipe joint, assuming post-emulsifiable fluorescent penetrant testing, allowing for training under conditions close to actual tests. It enables inspection practice on surface conditions similar to actual structures, such as welds and areas with shape changes, and allows for practical learning of the entire process from penetrant application to development, observation, and judgment of defects. Repeated training enhances understanding and reproducibility, significantly contributing to improving the pass rate for the PT Level 2 practical test.
Flexible multi-wire image quality indicator for digital RT that bends along the surface, Duplex IQI 13DF.
- Radiation detector
- Other inspection equipment and devices
- X-ray inspection equipment
Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>
- Other measurement, recording and measuring instruments
- Other inspection equipment and devices
- Optical Measuring Instruments
[Online Seminar] Changing Machining: What Companies Can Achieve with the Implementation of Monitoring Systems (February 12)
We will hold an online seminar as follows. The corporate perspective on the introduction of monitoring systems is changing year by year. We will explain the monitoring systems for machine tools that are currently needed, using various case studies to discuss the changes in the industry environment, what challenges customers perceive, their expectations for monitoring systems, and the effects of their implementation. This seminar will provide insights into specific approaches for your company's introduction of monitoring systems. Date and Time: February 12, 2025 (Thursday) 14:00 - 15:00 Instructor: Monitoring System Representative, ARTIS (MARPOSS Corporation Sales Development Department) Target Audience: - Customers considering the introduction of monitoring systems who want to know the specific process leading to implementation. - Customers interested in what challenges other companies have identified that led to the introduction of monitoring systems. - Customers researching the latest trends in monitoring systems for machine tools. We sincerely look forward to your participation.
Set of ultrasonic flaw detection mock test pieces ideal for UT Level 2 practical exam preparation.
- Other inspection equipment and devices
Same dimensions as STB-A1. Ideal test piece for adjustment and training of ultrasonic flaw detectors.
- Other inspection equipment and devices
Set of ultrasonic flaw detection mock test pieces ideal for UT Level 1 practical exam preparation.
- Other inspection equipment and devices
Lightweight 2.4kg high-performance hand magna with a variable yoke that accommodates curved surfaces.
- Other inspection equipment and devices
- Testing Equipment and Devices
Handmagna "YokeLite-100V" sales start - December 25, 2025
NDT Mart & Rental Co., Ltd. began selling its new product, the handheld magnet "YokeLite-100V," on December 25, 2025. ◆ Handheld Magnet "YokeLite-100V" The YokeLite-100V is an AC handheld magnet (gap-type magnetizer) used for magnetic particle testing (MT). With a compact design weighing approximately 2.4 kg, it is easy to handle and allows for efficient non-destructive testing work on-site. It generates a powerful alternating magnetic field, supporting the detection of defects such as cracks in welds and on metal surfaces. It features a variable yoke structure, enabling flexible adaptation to various inspection targets, including curved surfaces, corners, and fillet welds. It ensures a lifting power of over 4.5 kg, providing sufficient magnetization capability required for magnetic particle testing. Additionally, by equipping optional UV lights or white lights, it can accommodate a wide range of inspection methods, including fluorescent magnetic particle testing and visual inspections, offering excellent cost performance. This handheld magnet is useful for defect inspection and quality control in the fields of manufacturing, plant equipment, and welding inspection. It combines lightweight design with high inspection performance, contributing to improved work efficiency.
Capture the flaw detection results on the spot, smart black light.
- Work Light
- Other inspection equipment and devices
Efficiency boost with two-handed operation! Desktop black light.
- Other inspection equipment and devices
- Work Light
An appearance inspection device that accumulates inspection data and can be used for analyzing the causes of defects and improving quality.
- Visual Inspection Equipment
Utilize inspection data as quality control materials to aid in the analysis of quality trends and improvement activities in visual inspection.
- Visual Inspection Equipment
Low-cost, high-performance LED black light for non-destructive testing.
- Work Light
- Other inspection equipment and devices
Black light for non-destructive testing that supports photography and cloud sharing.
- Other inspection equipment and devices
- Work Light
Record inspection history as data to ensure quality traceability.
- Visual Inspection Equipment
Accumulating inspection data to support trend analysis of defects.
- Visual Inspection Equipment
Dual film observation device (showcase) compatible with large area + spot observation.
- X-ray inspection equipment
- Other inspection equipment and devices
Shaft Appearance Inspection Device | Inspection Data That Can Be Used for Quality Improvement
- Visual Inspection Equipment
LED observation device (showcase) for clearly observing RT film at a high brightness of 100,000 cd/m².
- X-ray Inspection Machine
- Other inspection equipment and devices
Accumulating inspection results as a history contributes to the improvement of quality traceability.
- Visual Inspection Equipment
Film densitometer with built-in light source, supporting 0.00 to 6.00D, and high-precision measurement of ±0.04D.
- X-ray inspection equipment
- Other inspection equipment and devices
Beginner-friendly ultrasonic thickness gauge with a resolution of 0.01mm and equipped with a through-paint function.
- Testing Equipment and Devices
- Other inspection equipment and devices
Pocket-sized rebound hardness tester with high-precision measurement in the palm of your hand.
- Other measurement, recording and measuring instruments
- Other inspection equipment and devices
Rebound hardness tester with simultaneous display of three scales such as HB, HV, HRC, and graph display support.
- Other inspection equipment and devices
- Testing Equipment and Devices
No couplant required. Electromagnetic ultrasonic thickness gauge that can measure over coatings.
- Other measurement, recording and measuring instruments
- Other inspection equipment and devices
Started selling the electromagnetic ultrasonic thickness gauge 'EMAT WIFI' - January 19, 2026
NDT Mart & Rental Co., Ltd. began selling its new electromagnetic ultrasonic thickness gauge, 'EMAT WIFI', on January 19, 2026. ◆ Electromagnetic Ultrasonic Thickness Gauge 'EMAT WIFI' The 'EMAT WIFI' is a thickness gauge that uses the electromagnetic ultrasonic (EMAT) method, which does not require a couplant (contact medium). Unlike conventional ultrasonic thickness gauges (UT), there is no need to apply a couplant; thickness measurements can be taken simply by placing the probe on the measurement target, making it ideal for beginners and screening in large-scale sites. It can measure materials with paint, scale, thick linings, and slight surface roughness, significantly reducing the hassle of pre-treatment. Additionally, it is equipped with WiFi communication capabilities, allowing for the confirmation and management of measurement data and waveforms in conjunction with smartphones and tablets. This facilitates smooth sharing of measurement results and data management on-site. It is optimal for measuring wall thickness and conducting corrosion inspections of plant equipment, piping, tanks, and steel structures. It contributes to the efficiency and reliability of thickness measurements in the field of non-destructive testing (NDT), such as maintenance inspections and equipment diagnostics.
Portable hardness tester compatible with multiple scales such as HB, HV, and HRC.
- Other inspection equipment and devices
- Testing Equipment and Devices
Visual inspection that records and accumulates inspection results that are difficult to detect visually as data, which can be utilized for quality improvement.
- Visual Inspection Equipment
Automation and labor-saving of the inspection process
- Visual Inspection Equipment
A reliable C-scan display enables rapid detection, sizing, and classification of defects in welds.
- probe
Application Note: DefHi ECA Probe for Defect Detection in Capacitor Fine Tube Welds [PDF Download Available]
Currently, seamless welded tubes are commonly used in capacitors. These tubes are prone to defects along the weld seam, such as axial cracks, blowholes, poor fusion, and inadequate melting. These defects make it difficult to achieve accurate sizing and classification assessments with standard eddy current bobbin probes. The reason is that the bobbin coil provides an average response over 360°, and the proportion of the weld defects relative to the entire tube wall being inspected by the probe is very small. To address this issue, Eddyfi Technologies has developed the "DefHi Probe," an eddy current array probe that uses multiplexing.
Not only is there a direct benefit of reducing excessive fuel consumption due to resistance, but there are also direct environmental advantages.
- Other inspection equipment and devices
Application Note: Proposal for the Removal Method of Marine Biofouling Attached to the Hull Using a Remotely Operated Robot [PDF Download Available]
This case study introduces the economic and environmental benefits of remotely removing marine organisms attached to the hull. Barnacles and other marine organisms that attach to the surfaces of commercial vessels increase drag, reducing the ship's speed and performance, and can increase fuel consumption by up to 40%. To address this issue, Eddyfi proposes a hull cleaning solution using remote robots with robotic crawlers. This technology can reduce the risk of accidents for cleaning personnel, lower costs, and mitigate environmental impacts. For more detailed information, please contact us.
Improvements in tools and S/N have enhanced sensitivity, detection capability, and defect location, allowing for evaluation over a shorter range.
- Other inspection equipment and devices
[Application Note] Guided Wave Testing - Detecting Small Changes from Vast Areas [PDF Download Available]
This application note introduces a case study on the detection of micro-defects using the innovative new product "Sonyks" guided wave testing device, which can operate as a medium-range ultrasonic testing (MRUT) method. It clearly summarizes the features of the new "Magneto Tool," which employs a magnetostrictive method and excels in accurately identifying and locating specific small changes, such as pitting and wall thinning in piping. This technology utilizes high-frequency guided waves that improve resolution of indications, enabling the detection of micro-defects that were difficult to identify with conventional methods. This advancement has the potential to significantly enhance the efficiency and effectiveness of inspections across many different industries. For more detailed information, please contact us.
Detecting FAC that had not been detected before at the elbow section of the piping in use, without removing insulation or cladding materials.
- Other inspection equipment and devices
Application Note: Evaluation of Flow Accelerated Corrosion (FAC) in Operating Pipeline Elbow Sections [PDF Download Available]
Depending on the equipment, high-temperature and high-speed fluids flow towards the 90° bend of carbon steel piping. As a result, it is inevitable that flow-accelerated corrosion (FAC) occurs on the outside of the elbow within the piping. We would like to introduce a technology for detecting CUI/FAC that occurs in the internal carbon steel piping without removing insulation materials or covers during equipment operation. For more detailed information, please contact us.
It enables faster and more accurate inspections, providing complete recording capabilities for data trend analysis.
- Other inspection equipment and devices
Application Note: Detection of Cracks and Corrosion in Aircraft Longeron [PDF Download Available]
Aircraft are the foundation of various industries and are subjected to harsh and nearly continuous use, making maintenance extremely important. Eddyfi Technologies has developed an ECA probe capable of inspecting both surface cracks and internal corrosion of multilayer aluminum in the longilon fastener section. For more detailed information, please contact us.
The improved probe makes data interpretation easier! By enhancing the detection and sizing performance of discontinuities, it provides more reliable inspection results.
- Other inspection equipment and devices
Application Note: Effective Inspection Methods for FSW (Friction Stir Welding) in the Aerospace Industry [PDF Download Available]
Friction stir welding is a solid-state joining method widely used in the aerospace industry. In the friction stir welding process, manufacturing parameters such as rotation speed and travel speed can lead to discontinuities at the joint, necessitating the application of non-destructive testing to verify the integrity of the joint. High productivity, work efficiency, and inspection accuracy are central to the quality assurance of newly manufactured aircraft.
Improving productivity through an easy-to-use scan plan also leads to higher detection probabilities and enhanced accuracy in characteristic evaluation.
- Other inspection equipment and devices
Application Note: Inspection Methods for TKY Welded Joints - Ultrasonic Testing Capable of Handling Complex Weld Shapes [PDF Download Available]
We would like to introduce an application note on inspection methods for TKY welded joints provided by Eddyfi Technologies (case studies and technical introduction). For example, it addresses the challenges of inspecting fillet welds commonly used in the construction sector. Traditional inspection methods, such as ultrasonic testing (UT), have struggled with detecting flaws in the complex shapes of these welds, resulting in lower probabilities of detection. Eddyfi's solution utilizes advanced portable phased array equipment equipped with software tools that enable effective definition of T and Y joints, achieving improved overall inspection and detection probabilities. For more detailed information, please feel free to contact us.
By designing a dedicated probe, we achieve suitable detection probability and visibility for composite material inspection, bringing reliability to the data results.
- probe
Application Note: Understanding the Safety of Composite Aerospace Equipment 【PDF Download Available】
Non-destructive testing of composite materials is an important means of detecting defects and deterioration, and it is crucial to select appropriate inspection methods to ensure the safety and durability of composite materials in the aerospace field. Eddyfi Technologies' inspection solutions address these challenges with a versatile NDT Sweeper and the capability to scan both flat and curved surfaces.
Improved detection, expanded inspection range, characterization of defects, increased speed, and enhanced data quality will enable better-informed decision-making.
- Other inspection equipment and devices
Application Note: Approach to Inspection of Stainless Steel and Dissimilar Metal Welds Using the Latest Ultrasonic Sensing [PDF Download Available]
Recent advancements in ultrasonic hardware and software have equipped almost all of our phased array ultrasonic testing devices with real-time full matrix capture and total focusing method. These represent a new generation of inspection technologies already defined in ASME and ISO standards. Austenitic stainless steel materials and dissimilar metal welds possess anisotropic coarse grain structures, resulting in specific behaviors of ultrasonic beams as they propagate through the material. This means high attenuation, high particle noise, beam redirection, and distortion; all of these phenomena ultimately lead to very challenging flaw detection conditions for phased array ultrasonic testing (PAUT). With the next generation of flaw detection equipment and high-performance probes offered by Eddyfi Technologies, we overcome challenges associated with inspecting high-difficulty materials such as dissimilar metal welds, including high ultrasonic attenuation, reduced signal-to-noise ratios, and insufficient coverage.
We propose an advanced portable tool capable of performing all ultrasonic techniques necessary for the identification of high-temperature hydrogen corrosion!
- Other inspection equipment and devices
[Application Note] Latest Inspection Method for Early Detection of High-Temperature Hydrogen Attack (HTHA), PCI Coherence Imaging [PDF Download Available]
In aging infrastructures such as the petrochemical industry, potential vulnerabilities that plant engineers and maintenance teams should be aware of, particularly high-temperature hydrogen attack (HTHA), are cited as one of the dangerous defects. This defect occurs when hydrogen contained in low-alloy steel changes its atomic form at high temperatures, permeating the steel and forming methane. Once methane is trapped within the metal, tiny bubbles form, ultimately leading to cracking and fissures. Eddyfi proposes advanced, portable ultrasonic inspection tools for the early detection of HTHA, utilizing TOFD, phased array ultrasonic testing (PAUT), and the latest total focusing method (TFM). This technology enables early detection of HTHA, enhancing the safety of critical equipment. For more detailed information, please [contact us].
Aiming to improve by adding phased array ultrasonic testing methods to non-destructive inspection techniques!
- Other inspection equipment and devices
Application Note: Efficient Inspection Method for Thermal Fatigue Cracking in Pipe Branches [PDF Download Available]
To ensure the smooth operation of transport pipes that transport products to various areas of the production plant, regular evaluation of the piping, including all branch connections, is necessary. Since piping and other plant equipment are subjected to periodic and very high thermal stress from the condensate and steam systems, the risk of fatigue cracking increases. In order to maximize productivity in an economic environment where efficiency is required, a non-destructive testing approach is needed to assess the fitness for service (FFS) of these production facilities.
Quickly evaluate and easily interpret circumferential cracks in difficult positions using full 3D imaging!
- probe
Application Note: Evaluation of Circumferential Cracking in Non-Magnetic Heat Exchanger Tubes - DefHi Probe [PDF Download Available]
Heat exchangers are used to heat and cool various fluids across a wide range of industrial sectors. This is particularly important for the power generation and petrochemical industries, where equipment reliability is of utmost importance. Standard ECT bobbin probes often struggle to detect circumferential cracks, posing challenges in many cases, but the DefHi probe offered by Eddyfi Technologies can identify various complex shapes inside heat exchanger tubes, allowing for the accurate detection of small circumferential cracks in the tube sheet, sizing, and evaluation of characteristics. Additionally, the inspection speed is eight times faster compared to rotating probes. The DefHi probe is less affected by changes in speed, making it usable regardless of the presence of a mechanical probe feeding device.
Develop a new inspection technology to replace MT for the welded joints of pressure vessel carbon steel!
- probe
Application Note: Ensuring the Safety of Pressure Vessels with Shark Probes [PDF Download Available]
A pressure vessel is a sealed container designed to hold fluids at a pressure that is significantly different from the surrounding pressure. They are installed throughout refineries. Due to the importance of their function, pressure vessels must undergo rigorous safety inspections regularly. The Shark Probe manufactured by Eddyfi is specially designed to inspect weld line cracks on the surface of such equipment. The probe's spring-loaded fingers are designed to adapt to the shape of the weld reinforcement, allowing it to scan the reinforcement, toe, and heat-affected zone in a single pass. This probe is equipped with a built-in encoder, making it possible to accurately locate defects along the weld. For more detailed information, please contact us.