We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for CAD.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

CAD(図面) - List of Manufacturers, Suppliers, Companies and Products

CAD Product List

1～15 item / All 16 items

Displayed results
[BIM Software Implementation Case Study] Metropolitan Bus Terminal

[BIM Software Implementation Case Study] Metropolitan Bus Terminal

All 3D models, including documents such as production drawings and work processes, are created using Tekla Structures!

The Integrated Transport Center is the largest investment project of the Lublin city government, and as part of this, the contractor Budimex has constructed a new bus station along with the reconstruction of the transport system. The company responsible for this impressive steel structure is Mostostal Kraków. The highlight of this project, the Lublin Metropolitan Bus Terminal's roof, is a representative landmark of Lublin, with the weight of the steel columns and truss sections with crowns totaling approximately 1550 tons. Its artistic appearance is composed of precise processing techniques and complex welding. MTA Engineering was responsible for the structural calculations, and the design engineering department of Mostostal Kraków led the detailed design work. The station's roof was designed as a spatial structure, supported by diagonal columns. All 3D models, including production drawings and work process documents, were created using Tekla Structures.

  • 3D CAD
  • 2D CAD Construction
  • antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Domestic Utilization Case Studies] Steel Frame Detailed Modeling

[Domestic Utilization Case Studies] Steel Frame Detailed Modeling

A case study utilizing Tekla Structures for steel detailing modeling has been published in the "Nikkankensetsu Tsushin Shimbun."

By downloading the PDF, you can view the catalog for the structural BIM software 'Tekla Structures' (Steel Detail Modeling) and case study articles on its use in Japan. (If the PDF button is not displayed) ⇩ Case study articles can be downloaded from the special site below ⇩

  • 3D CAD
  • antenna
  • 2D CAD Construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case Study] Transformation of North Sea Oil Field Platform Construction

[BIM Software Implementation Case Study] Transformation of North Sea Oil Field Platform Construction

Efficient design and manufacturing automation! Achieving advanced automation in the design and manufacturing processes!

The two platforms of the Johan Sverdrup oil field are designed and manufactured by the Norwegian company Aibel. Currently, the company's massive project is transitioning from a shipyard in the tropical region of Thailand to the rough seas of the North Sea. This project faced challenges such as compliance with standard requirements in the oil and gas industry and the integration of Tekla software with existing solutions. To address these challenges, experts in three-dimensional design using Tekla software collaborated to successfully semi-automate the drawing creation process with Tekla. They generated accurate information in a data format suitable for collaboration with machine tools, achieving up to 95% efficiency in the company's production labor and quality. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special website below ⇩

  • 3D CAD
  • antenna
  • 2D CAD Construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case Study] Karasuma Racecourse Redevelopment Project

[BIM Software Implementation Case Study] Karasuma Racecourse Redevelopment Project

Tekla is effective for designing buildings with large curves! Examples from redevelopment projects such as spectator stands.

The redevelopment of the Karasuyama Racecourse is a project to construct world-class facilities. The company responsible for the project is handling everything from design to detailed design, manufacturing, and the construction of the main viewing stand roof using a 45-meter cantilever beam. The very complex roof shape had significant restrictions on deflection and allowable tolerances, but by utilizing "BIM" and "Tekla Structures," they conducted precise detailed design that considered the use of fabrication drawings. [Case Overview] ■ Challenge: The very complex roof shape had significant restrictions on deflection and allowable tolerances. ■ Results - Achieved precise detailed design that considered the use of fabrication drawings. - Tekla is very effective for designing buildings with large curves, like the Karasuyama Racecourse. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special website below ⇩

  • 2D CAD Construction
  • 3D CAD
  • Modeler

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case Study] Forum Groningen

[BIM Software Implementation Case Study] Forum Groningen

The created drawings total over 28,000 sheets! Temporary support structures used during installation have also been modeled!

The steel structure of the Forum Groningen, designed by NL Architects, consists of eight steel "masses" made of spatial trusses fixed on two concrete cores that serve as the foundation. These concrete cores are connected at the top by a bridge structure, designed to have deflections in separate directions, requiring the steel "masses" to also face in their respective directions. The detailed design, fabrication, assembly, tolerance assurance, and logistics of such a twisted structure proved to be complex, presenting significant challenges. As a result, all of the main structure, as well as the supporting structure of the facade made of natural stone that moves in three directions (2,600 tons), were modeled using Tekla. The design, modeling, production drawing creation, fabrication, and installation were carried out concurrently at two locations, but were executed on schedule thanks to the collaboration of the engineering team. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special site below ⇩

  • 3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case Study] Brookfield Place Tower

[BIM Software Implementation Case Study] Brookfield Place Tower

Widely used for identifying interference points with design! We will introduce case studies of BIM software implementation.

The ICD Brookfield Place Tower, with 54 floors and a height of 282 meters, was constructed at the Dubai International Financial Centre. Considering the complex shape and the precision required at each construction stage, the steel structure design using Tekla played a crucial role in the project's success. "Tekla BIMsight" was widely used to identify interference points in the design by contractors for the roof and facade, equipment vendors, concrete contractors, and other stakeholders, and the detected interference points were resolved during the design phase. Adjusting the unique and complex steel structure was a challenging task, but BIM facilitated smooth coordination with the design and other stakeholders, as well as the generation of fabrication drawings, contributing to successful construction on schedule. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special site below ⇩

  • Software (middle, driver, security, etc.)
  • Other CAD related software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precast BIM Software Tekla Structures

Precast BIM Software Tekla Structures

Structural BIM software 'Tekla Structures' achieves productivity improvement and cost reduction through detailed structural calculations.

"Tekla Structures" allows for the construction of 3D models of precast concrete structures and enables the management of various information related to manufacturing and construction on a BIM model. By creating 3D models of concrete and rebar components, it can be utilized from basic design to structural calculations, detailed design, site construction, and management, achieving improvements in productivity and cost reduction. In the 3D model, it is possible to check in advance the intersections between rebars, the interference between rebars and steel frames, and the interference with equipment, thereby eliminating issues on site. The placement, joints, and anchoring of rebars can be automatically generated simply by specifying the parameters of the provided components, allowing for accurate tracking of material quantities. From the model, necessary drawings and documentation for manufacturing and construction, such as axis diagrams, rebar detail drawings, and rebar processing drawings, are automatically generated, enabling quick responses to design changes and avoiding inconsistencies between design information and manufacturing drawings. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special site below ⇩

  • 3D CAD
  • 2D CAD Construction
  • antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Productivity of Steel Frame Fabrication Evolving with BIM: Structural BIM Software

Productivity of Steel Frame Fabrication Evolving with BIM: Structural BIM Software

◆ Improvement of productivity, integration with automatic processing machines and assembly robots for steel frame production ◆ 3D software 'Tekla Structures'

"Tekla Structures" is a BIM software for structural detailing. By utilizing the detailed and accurate 3D models of Tekla Structures, which are modeled to a construction-ready level, unexpected costs and rework can be minimized, optimizing the entire process and enabling the realization of more profitable projects. The BIM models of Tekla software facilitate collaboration in design, fabrication, and site management, improving workflows not only in the office but also on construction sites. [Other Features] - Integrated management of all structural information from basic design to detailed design, estimation, production management, and construction on a 3D model, regardless of material or structural type. - Automatic generation of drawings, reports, and NC data from the model, allowing for reduced design time, quick and flexible responses to design changes, and the elimination of drawing inconsistencies. - Excellent operability with a GUI and graphic processing that comply with Windows standards, enabling the rapid generation of 3D models. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special website below ⇩

  • 3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case] Maren Corporation's Circulating Fluidized Bed Boiler

[BIM Software Implementation Case] Maren Corporation's Circulating Fluidized Bed Boiler

Improvement in detailed design of joints through modeling! A case where design errors were minimized.

We would like to introduce a case study on the implementation of BIM software in the design of Maren's Circulating Fluidized Bed (CFB) boiler. In this project, the use of "Tekla Structures" was essential for coordinating and adapting various piping and structural designs across different sections. Tasks were allocated early in the bidding phase, and effective detailed design of joints allowed for quick generation of drawings, minimizing design errors. At the points where structural steel components connect to the plant piping supports, structural members either converted IFC data to raw data of the same product or referenced IFC as information to be displayed in product drawings for verification. High-level detailed design has led to zero errors. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special website below ⇩

  • 2D CAD Construction
  • 3D CAD
  • Other CAD related software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case Study] Santiago International Airport

[BIM Software Implementation Case Study] Santiago International Airport

The production drawings are generated directly from the Tekla model! This ensures the management and improvement of production quality and safety.

VINCI Construction Grands Projets, in collaboration with Astaldi, is overseeing the conceptual design and construction of the expansion project at Santiago International Airport in Santiago, Chile. The conceptual design began in 2015, and the construction phase, which started in June 2016, had to be completed by the end of 2020. Since this project is designed based on strict seismic standards, adapting the structure to meet these requirements has been a significant challenge. To address this, collaboration tools such as "Tekla" and "Tekla BIMsight" were used. Thanks to the ability to create highly detailed models, adjustments can be made with certainty. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special website below ⇩

  • 2D CAD Construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case] Blue Lock Quarry

[BIM Software Implementation Case] Blue Lock Quarry

Achieving great results even in challenging projects between remote locations through the use of Tekla Structure!

Fulton Hogan Quarries undertook a project to renovate the crushing and screening plant at the Blue Rock Quarry located in Cedar Creek, Queensland, Australia. The Blue Rock Quarry is situated approximately 50 km south of Brisbane's city center. The objective of this project was to expand the production capacity of the crushing and screening plant to meet the anticipated increase in demand for aggregate and road base products. Proindustrial Construction Company (Portugal) closely collaborated with contractors NascoTech and Southern Cross Engineering to carry out the civil works and structural design of the steel structures for this complex facility. The company was also responsible for creating various types of drawings and documents used in steel fabrication, including detailed designs for connections and joints, as well as shop drawings. Although this was a challenging project that required design collaboration between remote locations in Australia and Portugal, significant achievements were made thanks to the use of Tekla Structure and the dedicated efforts of the participating team members.

  • 3D CAD
  • 2D CAD Construction
  • antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case] Pepper Tree Quarry

[BIM Software Implementation Case] Pepper Tree Quarry

Conducted 3D laser scanning and integrated it as a point cloud on the reconstructed Tekla model!

In 2013, Sandvik received a project from their client Boral for a quarry located in Pepper Tree. The factory, located in Sydney, Australia, is equipped with six crushers, nine screening machines (vibrating screens), a conveyor belt approximately 3.4 km long, and a fully automated loading system. This project was one of the more complex ones undertaken by the company. The main challenge was integrating the complex new equipment into the existing factory, which had not been designed for it, and not all existing blueprints were available. By importing from other applications, utilizing past Tekla models, and performing rough modeling of the remaining parts, a complete three-dimensional model of the factory was reconstructed in "Tekla Structure" using the existing model and drawing information. Scanning the existing factory with Trimble's 3D laser scanner made it possible to compare the model with the actual factory, serving as the foundation for the design of the new equipment. *For more details, please feel free to contact us. ⇩ The catalog can be downloaded from the special website below ⇩

  • 3D CAD
  • antenna
  • 2D CAD Construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case Study] Subway Extension Line Ranchi Metro

[BIM Software Implementation Case Study] Subway Extension Line Ranchi Metro

Effectively utilized in various situations! Case study of implementation in one of Finland's largest infrastructure projects.

The Länsimetro is a subway line that connects the city of Helsinki with the neighboring city of Espoo. The construction of eight new stations, each with its own unique characteristics, has enabled passengers to travel using the subway. To realize this large-scale project, the engineering company A-Insinoorit began the design work in 2009. It was clear from the outset that BIM was necessary to manage the construction of the underground stations, which have various aspects. Multiple CAD programs were used for design and equipment planning, but structural design was fully implemented using "Tekla Structures." 【Case Overview】 ■ Implementation Site: Subway Extension Line Länsimetro (One of the largest infrastructure projects in Finland) ■ Implemented Product: Tekla Structures *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩The catalog can be downloaded from the special site below⇩

  • 2D CAD Construction
  • 3D CAD
  • Modeler

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case] Concentrated Solar Power Plant

[BIM Software Implementation Case] Concentrated Solar Power Plant

The main steel structure consists of 16 columns! It is supported by three main platforms!

SteelPro 4 s.r.o. undertook the basic design, general layout creation, and modeling of all connections for a steel structure 3D model of a solar receiver (MSR) with a total weight of approximately 900 tons and a height of 36 meters. The main steel structure will be completed, including secondary structures such as platforms, various walkways, and supports for equipment. Appropriate solutions were required to resolve technical space requirements and interference with the structure. A significant reason for the success of this project was the sharing of the 3D model among members of different professions, which not only allowed for progress tracking but also enabled close collaboration among stakeholders. Additionally, the structure was divided into production units in line with the delivery schedule, and the 3D model was provided to steel trading companies and steel fabricators. This made it possible to create drawings both at the manufacturing plant and on-site. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩ The catalog can be downloaded from the special site below ⇩

  • 3D CAD
  • antenna
  • 2D CAD Construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BIM Software Implementation Case Study] Lamprell Company (Marine Structures)

[BIM Software Implementation Case Study] Lamprell Company (Marine Structures)

Significant improvement in the efficiency of the structural design department! Introducing the case of Lamprell, which achieved high precision.

Lamprell, a company engaged in the engineering of marine structures, chose "Tekla Structures" with a good understanding of the speed, accuracy, consistency of detailed design, and the interference checking function between steel components, as well as the benefits of visualization. Initially, there were some doubts about the plan to use Tekla software for the fabrication of the barge, but considering the accuracy of the software, it was unanimously decided that utilizing 3D modeling would be the better approach. The modeled barge was able to extract various detailed information, such as platforms and handrails, within approximately 4 to 5 months. The team has a strong trust in the support system of this product and expresses great satisfaction with the ease of managing documentation on the software and the functionality for keeping records of drawing changes. *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩The catalog can be downloaded from the special website below⇩

  • Other CAD related software
  • 2D CAD Construction
  • Modeler

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to CAD

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.