Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
1111～1140 item / All 1400 items
We propose lasers with wavelengths of 639nm, 656.5nm, 660nm, and 671nm.
Manufacturer: CNI Laser (China) This is a continuous wave laser with a long coherence length, ideal for holography applications. It offers 600mW at 639nm, 50mW at 656.5nm, 20mW at 660nm, and up to 2.5W at 671nm. It has numerous achievements in the domestic market.
It is a high-power yet low-cost laser module.
Manufacturer: Hangzhou BrandNew Technology (China) This is a 150W high-power, 200µm core, NA0.22, SMA905 connector output 808nm fiber-coupled diode laser module made by BrandNew Technology. It is widely used as a pump light source for fiber lasers, DPSS lasers, lighting, and scientific research.
It is a low-cost customizable filler material.
◆Excellent characteristics - Strength, elasticity, hardness - Corrosion resistance - Wear resistance - Superplasticity
This is a laser-specific curtain coated with silicone on fiberglass, featuring excellent heat resistance and flame retardancy.
Manufacturer: Laservision USA (USA) Choose your preferred size and usage. The appeal lies in its versatility, allowing you to install it on curtain rails, use it as a partition, or as window coverings. We will provide a quote based on your desired model and size. The minimum size increment is 0.5 inches (approximately 13mm). 【Example】 For desired dimensions of W2,000mm x H1,000mm, it will be W79.5" x H39.5" (approximately W2,007mm x H1,004mm). *Note* Only curtains are for sale. Please prepare surrounding accessories separately. (Industrial curtain rails, other fixtures, etc.)
It is a CO laser with a maximum power of 2W and a variable wavelength of 5.3 to 6.1 µm.
Manufacturer: Access Laser (USA) This is a CO laser with a mid-infrared wavelength, featuring a model that allows for variable wavelengths through a grating. It supports a wide range of variable wavelengths for various applications. In addition to a maximum power of 2W, it boasts a stability of less than 2%.
This is a photodetector module that has successfully achieved remarkable miniaturization.
Manufacturer: VIGO Photonics (Poland) The "AMS3140-01" is a cost-effective solution developed for mass production projects. Its built-in amplifier and temperature controller provide stable responsiveness over a wide range of ambient temperatures. The wide bandwidth and low 1/f noise corner frequency enable efficient measurements when used with common heat sources such as MEMS microheaters and pulse LEDs/lasers. The differential output allows the AMS3140-01 to be easily connected to connectors with strong resistance to electromagnetic interference. Its compact housing makes it easy to integrate into the user's system. ● Built-in temperature controller ● Chip temperature controllable from pins ● Low 1/f noise corner ● Single low supply voltage: 3.3 V ● Differential output ● Ultra-compact: 30 x 19 x 10 mm ● Low power consumption ● Evaluation kit available
We will create a completely custom product tailored to your individual needs. We will propose VCSEL modules that are optimal for various sensors.
Manufacturer: Korean Laser Technology (South Korea) Korean Laser Technology (KLT) offers a variety of VCSEL modules. The wavelengths range from 808nm to 1550nm, with power from 5mW to 800W, featuring top-hat beams and various packaging options. It is also possible to integrate VCSELs with diffusers or photodiodes. We select the appropriate chip based on the required range, such as for close-range (10-20cm), proximity (up to 2m), or mid-range (up to 5m) applications. These modules are widely used in applications such as machine vision, gas, smoke, and dust detection, LIDAR, laser curtains, and optical communication. KLT designs the optimal module according to the specifications requested by our customers. All products are custom-made.
This is a CW laser with a wavelength of 680 nm. It is a model designed to reduce intensity noise.
Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 680nm. It has a power output of 800mW in a spatial output beam. Fiber output and analog/digital modulation are available as options.
It is a CW laser with a wavelength of 635 nm.
Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 635nm. It has a power output of 200mW in a spatial output beam. Fiber output and analog/digital modulation are available as options.
This is a CW laser with a wavelength of 690 nm. It is a model designed to reduce intensity noise. It comes with a fiber output option.
Manufacturer: CNI Laser (China) This is a CW diode laser with a wavelength of 690nm. It has a spatial output beam power of 1.3W and 1.2W after a fiber with a core diameter of 400um. Analog and digital modulation are available as options.
It is a high-reflective mirror with over 99.7% reflectivity using IBS coating, characterized by low GDD.
Manufacturer: Optoman (Lithuania) Thanks to cutting-edge IBS coating technology, we achieve excellent features such as high damage threshold, low absorption, and low scattering. OPTOMAN offers custom products tailored to your needs. ◆Specifications◆ Substrate material: UVFS (Corning 7980 0F) Diameter: 25.4 mm +0/-0.1 mm Thickness: 6.35 mm +/-0.1 mm Clear aperture: >80% Surface flatness, S1: <λ/10 @ 633 nm Coating (IBS): S1 (arrow marks): HRavg > 99.7% @ 730-870 nm, HRs > 99.7% @ 685-935 nm, AOI 45 deg GDD: 0 ±20 fs² @ 700 - 900 nm, s-pol & 0 ±20 fs² @ 740 - 860 nm, p-pol TOD: 10 fs³ @ 800 nm, s-pol & 40 fs³ @ 800 nm, p-pol S2: SCC
It is a CW laser with a wavelength of 570 nm.
Manufacturer: CNI Laser (China) This is a yellow laser with a wavelength of 570nm. It is air-cooled and has a maximum average power of 100mW.
It is a CW laser with a wavelength of 571 nm.
Manufacturer: CNI Laser (China) This is a yellow laser with a wavelength of 571nm. It is air-cooled and has a maximum average power of 200mW.
It is a CW laser with a wavelength of 577 nm.
Manufacturer: CNI Laser (China) This is a yellow laser with a wavelength of 577nm. It is air-cooled and has a maximum average power of 4000mW.
It is a CW laser with a wavelength of 582 nm.
Manufacturer: CNI Laser (China) This is a yellow laser with a wavelength of 582nm. It is air-cooled and has an average power of up to 100mW.
It is a CW laser with a wavelength of 588 nm.
Manufacturer: CNI Laser (China) This is a yellow laser with a wavelength of 588nm. It is air-cooled and has a maximum average power of 4500mW.
It is a CW laser with a wavelength of 607 nm.
Manufacturer: CNI Laser (China) This is an orange (orange-colored) laser with a wavelength of 604nm. It is air-cooled and has a maximum average power of 600mW.
It is a CW laser with a wavelength of 612 nm.
Manufacturer: CNI Laser (China) This is a red laser with a wavelength of 612nm. It is air-cooled and has a maximum average power of 100mW.
It is a CW laser with a wavelength of 635 nm.
Manufacturer: CNI Laser (China) This is a red laser with a wavelength of 635nm. It is air-cooled and has a maximum average power of 1000mW.
It is a CW laser with a wavelength of 650 nm.
Manufacturer: CNI Laser (China) This is a red laser with a wavelength of 650nm. It is air-cooled and has a maximum average power of 3500mW.
Moisturizing ingredients combined! A hand cleaner for the manufacturing industry that is tough on stubborn dirt and gentle on hands.
The "GSN Hand Cleaner" is a hand cleaner suitable for hand washing in manufacturing environments. The scrub particles work powerfully against stubborn oil stains that are deeply embedded, quickly removing dirt that clings to hands, nails, edges, and fingerprints. Additionally, thanks to the moisturizing ingredient (aloe extract), it is gentle on the skin and keeps it healthy. 【Features】 ■ Contains scrub particles ■ Contains aloe extract *For more details, please download the PDF or feel free to contact us.
Outstanding workability with a simple process! An environmentally friendly water-soluble cleaner that is also easy to clean.
The "SR Series" is a cleaner that simultaneously removes water stains, oil films, and acid burns that have been difficult to eliminate through simple tasks using a polisher. By finishing the target surface to be hydrophilic, it creates a surface that allows water to blend easily, preventing the reattachment of water stains and similar issues. Additionally, since it only uses natural mineral resources primarily composed of volcanic ash, it is not subject to regulations such as the PRTR Law or the Labor Safety and Health Law Enforcement Ordinance. 【Features】 ■ Excellent workability with a simple process ■ Achieves a hydrophilic finish ■ Environmentally friendly and water-soluble ■ Uses only natural mineral resources primarily composed of volcanic ash ■ Results in a clean finish without damaging the material *For more details, please refer to the PDF document or feel free to contact us.
Excellent cleaning power that easily washes away stubborn dirt such as oil and grease! The amount used per application is about 2g (approximately the size of the first joint of your pinky), making it economical!
- Excellent cleaning power that easily washes away stubborn dirt such as oil and grease. - Economical with a usage amount of about 2g (approximately the size of the first joint of a pinky finger). - Contains no abrasives like sand, preventing clogs in drainage pipes. - Over 90% of the ingredients are biodegradable, making it environmentally friendly. - Refreshing scent for a pleasant usage experience.
A plant-based cleaning solution that powerfully cleans carbon and oil stains, regardless of wheel material.
Our company offers a "wheel cleaner" that combines strong dissolving power and degreasing ability, using plant-based raw materials such as palm, corn, soybeans, safflower, sugarcane, and apples. By heating the cleaning agent, "penetration and peeling" progress. It removes carbon and adhesives baked onto molds, tar adhered to machinery, and stubborn oil stains. 【Features】 ■ Completely free of toxic substances ■ Plant-based, considerate of people and the environment ■ Powerful cleaning ability despite being made from natural materials ■ Prevents slime, clogging, and unpleasant odors in wastewater *For more details, please download the PDF or contact us.
Safe plant-based cleaning solution to replace thinner, acetone, and chlorine-based solvents.
Our company offers a plant-based cleaning solution, "Cleaner for Spray Guns," as an alternative to harmful and dangerous solvents such as thinners, acetone, and chlorine-based solvents, as stipulated by the "Organic Regulations and Labor Safety Law." By heating the cleaning agent, it cleans through "penetration and peeling." Additionally, this product harnesses the power of nature with ingredients like oats, soybeans, and rapeseed, and it is biodegradable, returning to nature. 【Features】 ■ Completely free of toxic substances ■ Plant-based, considerate of people and the environment ■ Powerful cleaning ability despite being made from natural materials ■ Cost reduction through reuse *For more details, please download the PDF or contact us.
[Water-soluble and safe] A cleaning agent specifically developed to remove tire marks. It is environmentally friendly yet effective against stubborn stains! *No applicable regulations.
The NEW! Tire Mark Cleaner from the "Miryokurin(R) Series" has its main ingredients as food additives and water, allowing for safe use in various locations with low COD levels. This cleaning agent is specifically developed to remove "tire marks," improving foam drainage and doubling the power to eliminate tire marks. We encourage you to try it on tire marks that could not be removed with other chemical cleaners! Additionally, it maintains high cleaning power against mineral oil stains, making it effective as a floor cleaning agent as well. ☆ No applicable regulations. You can use it with confidence ☆ 【Applications】 ■ Concrete surfaces such as urethane and epoxy ■ Removal of tire marks from painted floors ■ Cleaning of oil stains on floors *Samples available! *For more details, please download the PDF or contact us.
Hybrid structure of cyclone + plastic filter! Capable of freely sucking up both dry debris and liquids.
The "Transfer" is a vacuum cleaner that can be used for both wet and dry applications (capable of dry and wet suction / simultaneous dry and wet suction). The cyclone and plastic filter feature a patented hybrid structure. The special cyclone CSS allows for the suction of water and oil without wetting the filter, preventing damage to the filter from liquids. Therefore, it can freely suction both liquids and dust. 【Features】 <Special Cyclone CSS Mechanism> ■ Suction materials are first collected and separated by the special cyclone. ■ Immediate suction from powder to water and from water to powder, enabling versatile suction for both dry and wet applications. <Dry Filter> ■ Exhibits exceptional strength against fine dust, with a collection rate of 99.9% (at 2.0μm). ■ Durability is approximately 3 to 4 times that of fabric and paper filters. *For more details, please refer to the PDF document or feel free to contact us.
Compact type 50W! Further enhancing the efficiency of surface modification on-demand processing.
We would like to introduce our laser cleaner, the 'FL-LC-50'. Also known as a laser cleaning machine, laser rust removal machine, laser blast, laser scaling device, laser paint stripping machine, and laser degreasing machine, this device can quickly modify the surface of metals by removing rust and stripping coatings through high-power laser irradiation. It enables the removal of rust, resin coatings, and surface coatings, as well as cleaning, coating, pretreatment for adhesion and welding, and prevention of re-adhesion corrosion of oxides, all without damaging the base materials such as metals, plastics, glass, and stone. 【Features】 ■ Dry process ■ Non-contact ■ Does not easily scratch the substrate ■ Prevents re-adhesion of oxides and other contaminants ■ Low environmental impact (less industrial waste and noise) *For more details, please refer to the related links or feel free to contact us.
Rust removal, dirt removal, surface modification... Easy and speedy with lasers!
In automotive manufacturing, a significant amount of time and effort is spent on removing dirt and rust from parts and equipment. Traditional polishing and chemical cleaning methods have challenges, including time-consuming processes and a high environmental impact. The Laser Cleaner FL-LC series can remove dirt and rust non-contact with high-power lasers, significantly improving work efficiency and reducing environmental burden. 【Usage Scenarios】 - Rust removal from automotive parts - Dirt removal from engines and chassis - Surface treatment before painting - Oxide removal from welds - Maintenance of molds and jigs 【Benefits of Implementation】 - Reduction in work time - Cost savings through workforce reduction - Decreased environmental impact - Improved quality - Enhanced working environment
Instantly remove rust and dirt with lasers! Streamlining surface treatment of aerospace components.
Surface treatment of aerospace components requires high precision and quality. Conventional polishing and chemical cleaning are time-consuming and costly, and there are concerns about environmental impact. Therefore, the "Laser Cleaner FL-LC Series," utilizing laser technology, has been developed. This product achieves non-contact, high-speed surface treatment, contributing to the improvement of quality and work efficiency of aerospace components. 【Application Scenarios】 - Surface treatment of aircraft components: Removal of rust and dirt, pre-treatment before coating - Surface treatment of rocket components: Removal of oxides, surface modification - Surface treatment of satellite components: Precise cleaning, removal of foreign substances - Surface treatment of space station components: Measures against deterioration due to long-term use 【Effects of Implementation】 - Improvement in surface treatment quality: Achieves a uniform and high-quality surface through precise laser processing - Increased work efficiency: Significant time reduction compared to conventional methods - Cost reduction: Contributes to the reduction of labor and material costs - Reduction of environmental impact: Decreases the amount of chemicals and abrasives used, minimizing environmental effects
