Control device Product List and Ranking from 290 Manufacturers, Suppliers and Companies | IPROS GMS

Non-stop type contact monitoring and control device DN-3810BS series

High reliability and high availability! Designed for use in critical infrastructure such as broadcasting, disaster prevention, transportation, and communications.

The "DN-3810BS Series" is a contact monitoring and control device that enables autonomous switching and uninterrupted operation even in the event of a failure, thanks to its redundant design of the integrated management blade. With network redundancy, it supports autonomous switching in the event of network system errors. Power redundancy allows for continued operation even during power system troubles. The integrated management blade is equipped with an ARM Cortex A53 4-core 64-bit MPU and an ARM Cortex M4 32-bit. Each I/O blade is also equipped with an ARM Cortex M4 32-bit, achieving high-speed performance. 【Features】 ■ Input ports support up to 168 channels, and output supports up to 96 channels. ■ Redundant design for the integrated management plate, network, and power unit, ensuring high speed and high security. ■ Achieves high availability while pursuing high speed and multi-channel capabilities, making it suitable for mission-critical situations. *For more details, please refer to the PDF document or feel free to contact us.

Pulse-compatible digital input/output device 'WD100-GWPIO'

Contributing to the operational management and visualization of facility equipment! Converting to the original physical quantities and aggregating them.

**Features** - Dual-channel simultaneous measurement with one unit - Two sets of pulse measurements can be connected to a single measurement unit. - Long-distance communication via LoRa wireless technology - Communication is possible over 11 km in line-of-sight conditions and over 3 km in dense areas. *Note: Communication distance is affected by terrain and obstacles.* - Low power consumption - Approximately 2W of power consumption, making it easy to supply power for outdoor use. - Installable indoors and outdoors - Outdoor use is possible with a waterproof cabinet, and it can withstand temperature changes from -20°C to +70°C. - Accumulation of converted physical quantities - Pulse accumulation values/instantaneous values are scaled and converted into the physical quantities being measured, and data is accumulated. - Compatible with WD100 series measurement units - Data can be centrally collected in combination with existing environmental measurement units of the WD100 series. *For more details, please refer to the PDF document or feel free to contact us.*

First Gate Co., Ltd. General Catalog

Quickly provide technological innovations in semiconductor manufacturing equipment as an import trading company.

The "First Gate Corporation Comprehensive Catalog" is the comprehensive catalog of First Gate Corporation, which engages in the import and export sales of semiconductor manufacturing equipment and inspection equipment, as well as technical support. This catalog introduces products such as semiconductor manufacturing components including "Teflon flow meters," "flow controllers," "Teflon chemical supply pumps," and "various heaters." [Contents] ■ Company Overview ■ History ■ Product Lineup *For more details, please contact us or download the catalog.

Significant cost reduction for three-dimensional automated warehouses with APT-style renewal!

Leave existing equipment as is and support maintenance for other manufacturers! "APT-style renewal" allows for significant reduction in management costs.

Would you like to review the costs related to your current automated warehouse with an APT-style renewal? Automated warehouses can become costly, especially with updates to management computers and control devices, as well as daily inspections and repair work... However, none of these amounts can be ignored. Our company has a track record of updating management computers and control devices for all automated warehouse manufacturers, as well as performing repairs and inspections, making us the only system engineering company in the country with 28 years of experience. We have completed 450 projects. Even if it's a minor issue, please feel free to consult with us. (For more details, please comment through the contact form below or inquire via the catalog download.)

Prevent forgetting to tighten screws! 'Screw Star σ'

Counter for discovering and preventing forgotten tightening of screws (careless mistakes)

● This is a control device designed to be used in combination with an electric screwdriver to detect and prevent "forgotten screw tightening (human error)" and "incomplete screw tightening." ● It automatically measures the screw tightening time, making it easy to set up. (Manual settings allow for precise adjustments.) ● With the second timer setting, it can stop the screwdriver's rotation. (It alerts you when a long screw is mistakenly tightened.) ● It can memorize eight different screw tightening patterns and perform screw tightening by combining them sequentially. ● It is equipped with various I/O terminals, allowing for connection with automated machines. ● Even if multiple screwdrivers are used, you can increase the number of units through a daisy chain and control the screwdrivers in the order of operation. * For more details, please refer to the catalog. For inquiries, please contact Koyama Co., Ltd.

Three-color LED control device

3-color LED control device

This product is a device for controlling the lighting, flashing, and dimming of various LED modules. With a 3-color LED module (red, green, and blue), you can select from 16 patterns, including individual colors and all colors lit simultaneously. The electrical capacity per color can be used up to 3A. The input voltage can be used from DC5V to DC24V. The operating speed can be set with a volume control. Dimensions: 60×130×40mm.

Alarm Control Device 'AL-TypeC'

Introduction of an alarm unit that directly drives an alarm device with signals from OSNET measuring equipment.

The "AL-TypeC" is an alarm unit that connects to devices such as graphing extensometers, wire sensors, and rain gauges to directly drive alarm devices like rotating lights and sirens. There are two alarm inputs. The alarm output also has two systems: timer-linked and continuous. 【Features】 ■ Directly drives alarm devices such as rotating lights and sirens ■ Two alarm inputs ■ Two systems for alarm output: timer-linked and continuous *For more details, please refer to the PDF document or feel free to contact us.

[Example] External control device using air

External control device using air from the pharmaceutical manufacturing line.

It was used in the manufacturing line of pharmaceutical company K's products. The existing equipment had maintenance issues due to being imported, so we switched to domestic products, which required performance and quality equal to or greater than the previous ones, and we successfully achieved that. For more details, please contact us.

Air-fuel ratio control device

We provide a preset system that determines the opening degrees (16 points) of the gas and air control dampers through touch panel operation to control the air-fuel ratio. We are also developing a feedback system (automatic control based on gas and air flow). ■ Equipment Features - Reduction of spare parts and maintenance costs. - Improved operability, accuracy, and responsiveness. - Enhanced operability through touch panel operation. - Possible reduction of running costs compared to proportional valve systems. ■ Equipment Applications Air-fuel ratio control introduced in burner equipment.

Humidity control device [*Free demo unit available!*]

No large-scale equipment is needed for humidity control! Achieve localized humidity control quickly and at low cost.

☆★Demo units available for loan☆★ We also lend out compressors and tubes. If you are in the Tokyo area, we can also visit you directly for installation! Please feel free to contact us! ■This is a device for controlling humidity in confined spaces. Our humidity control unit is compact and can control humidity in relatively small spaces such as glove boxes, desiccators, and incubators with a volume of up to 150L. It is used in university laboratories and research facilities where experiments and tests need to be conducted under controlled humidity conditions. This device has a proven track record in moisture control for raw material storage and static electricity prevention during winter. If you are considering precise humidity control, please feel free to contact us. ~Dehumidification modules for the device are available for individual sale~ https://www.ipros.jp/product/detail/2000237525 ■Inquiries about the product - Industrial Filter Sales Department, Eastern Japan Sales Office TEL: 03-5568-9281 - Industrial Filter Sales Department, Western Japan Sales Office TEL: 06-6533-0360

Humidity control device for observing raw materials that are easily affected by humidity.

Control the humidity consistently within a localized space (such as an acrylic box or glove box)! It can also be used as a replacement for desiccants (silica gel, zeolite).

This is a device that controls humidity within a localized space at a constant level. It has a proven track record in observing various raw materials that are susceptible to humidity. The raw materials being observed include powders, electronic materials, adhesives, paints, resins, and more. ■ Main Use Cases - Since the weight of powders changes with humidity fluctuations, humidity control is desired during weighing. - How much can electronic materials withstand in a humid environment? - How does the curing of adhesives change when humidity conditions are altered? - How does the drying of paints change when humidity conditions are varied? - How does the curing of resins change when humidity conditions are modified?

『IC Auto door touch』

Change automatic doors to IC authentication gates! No more power operations in the morning and evening or unlocking and locking with keys!

The "IC Auto door touch" is a device that enables time control for automatic doors. Simply replace the existing touch switch's subunit! There is no need for power operations in the morning and evening or for locking and unlocking with a key; you can freely set the time for entry and IC authentication. Additionally, it allows for easy management of up to 10,000 history logs, and you can register up to 10,000 IC cards such as Felica and Mifare. 【Features】 ■ Enables time control for automatic doors ■ Usable by simply replacing the existing touch switch's subunit ■ Freely set the time for entry and IC authentication ■ Easy management of history logs (up to 10,000 entries) ■ Can register up to 10,000 IC cards such as Felica and Mifare ■ Prevents wandering and other issues in advance *For more details, please refer to the catalog or feel free to contact us.

[Data] Control of DC Motors

A method to forcibly short-circuit the terminals of the motor to stop it! Explanation with illustrations.

This document introduces the control of DC motors. It includes a wealth of information on topics such as "control by resistance," "brake operation (short-circuit brake)," and "bidirectional drive of DC motors using transistors." Additionally, it provides detailed explanations on "PWM control (Pulse Width Modulation)" and "electrical noise countermeasures." Please take a moment to read it. 【Contents】 ■ Control by resistance ■ Brake operation (short-circuit brake) ■ Bidirectional drive of DC motors using transistors ■ PWM control (Pulse Width Modulation) ■ Electrical noise countermeasures *For more details, please refer to the PDF document or feel free to contact us.

Ignition control device "Igniter BM4"

Easy to install and optimizes the ignition process! Ignition fans that are often installed in apartments.

The "Igniter BM4" is an ignition control device specifically developed for installation in wood chip and pellet heaters. The interface is carefully selected, allowing for easy installation of the ignition blower in any type of combustion furnace. Additionally, the quietness of the ignition fan has improved by 10 dB(A), making it particularly suitable for small heating containers. 【Features】 ■ Easy installation ■ Optimized ignition process ■ Suitable for various heating containers ■ Fully arranged plugs *For more details, please download the PDF or feel free to contact us.

Ignition control device "Igniter BR4"

Optimize the ignition process of wood chips, pellets, or biomass heating systems!

The "Igniter BR4" is an ignition control device specifically designed for use in pellet and wood chip heating systems. The ignition fan provides 3.4kW, surpassing various glow igniters. The advantage of this high-performance blower is that it allows for quick and clean ignition of the furnace. Additionally, the product's advantage lies in its carefully selected interface, making it easy to install on any type of combustion furnace. 【Features】 ■ Red Dot Design Award winner ■ For wood chip and pellet heaters ■ Directly plugs into the device ■ Air hose connection adapter ■ Complete assembly implementation *For more details, please download the PDF or feel free to contact us.

On-type oxygen partial pressure control device SiOC-200C

The oxygen partial pressure is adjusted and measured using a zirconia-type oxygen sensor.

This device adjusts the oxygen partial pressure through equilibrium reactions by adding hydrogen (H2) and water vapor (H2O) at arbitrary concentrations to the test atmosphere gas (such as Ar), and measures it using a zirconia oxygen sensor. This device enables rapid adjustment of the oxygen partial pressure in the test atmosphere gas, and can measure extremely low oxygen concentrations (1 to 10E-30 atm O2) using the included oxygen sensor (SiOC-200C).

Wet-type oxygen partial pressure control device SiBOC-200D

Ultra-low oxygen atmosphere (approximately 10E-30 atm O2) adjustment device using H2/O2 balanced gas.

The wet-type oxygen partial pressure control device "SiBOC-200D" adjusts the oxygen partial pressure through equilibrium reactions by adding hydrogen (H2) and water vapor (H2O) at arbitrary concentrations to the test atmosphere gas (such as Ar), and measures it using a zirconia-type oxygen sensor. This device allows for rapid adjustment of the oxygen partial pressure in the test atmosphere gas, and can measure extremely low oxygen concentrations (1 to 10E-30 atm O2) using the included oxygen sensor (SiOC-200C). For more details, please download the catalog or contact us.

Wet-type oxygen partial pressure control device "SiBOC-200D"

Rapid adjustment of oxygen partial pressure in the test atmosphere gas is possible!

The "SiBOC-200D" is a wet-type oxygen partial pressure control device that can adjust and measure oxygen partial pressure. By adding hydrogen (H2) and water vapor (H2O) at arbitrary concentrations to the test atmosphere gas (such as Ar), the oxygen partial pressure is adjusted through equilibrium reactions and measured using a zirconia-type oxygen sensor. It can provide a rapid ultra-low oxygen atmosphere, and the included high-sensitivity oxygen sensor allows for monitoring of the oxygen partial pressure. 【Features】 ■ Capable of adjusting ultra-low oxygen atmospheres (up to 10E atmO2) using H2/O2 equilibrium gas ■ Can provide a rapid test atmosphere ■ Oxygen partial pressure can be monitored with the included high-sensitivity oxygen sensor *For more details, please refer to the catalog or feel free to contact us.

High-performance automatic temperature control machine (liquid circulation type)

Liquid circulation temperature control device. Rapid heating and cooling from -80℃ to +170℃!

- A liquid circulation type temperature control device unlike anything seen before - Astonishingly high precision (±0.01 to 0.1℃) - Incredibly rapid heating and cooling. - Temperature range: -80℃ to +170℃ Temperature range: -45℃ to +250℃ Controlled without exchanging the circulating liquid (for use with dedicated oil) - Forced cooling from high temperatures using a cooling unit. Additionally, it is packed with functions for temperature control (safety, communication, etc.). Model Temperature control range LH45 -45 to +250℃ LH85 -85 to +250℃ Cooling capacity (at 200℃): 1.5 to 5.5 kW Heater capacity: 1.8 kW or 6 kW

Iodine and Potassium Iodide Concentration Control Device 'CCC METER VII'

Measuring the concentration of iodine (I2) and potassium iodide (KI) used in the dyeing process of PVA film!

The "CCC METER VII" is a concentration control device for iodine and potassium iodide that continuously measures the absorbance and conductivity of a solution, demonstrating excellent responsiveness. It automatically measures the concentration of iodine and potassium iodide used in the manufacturing of polarizers (PVA film dyeing process). 【Specifications】 ■ Concentration measurement range - I2: 0 to 0.30% - KI: 0 to 10.0% ■ Measurement method: Absorbance method & conductivity method ■ Measurement temperature range: 5 to 50℃ *For more details, please download the PDF or feel free to contact us.

Continuous Concentration Control Device for Pharmaceutical Solutions 'CCC METER(R)'

Total support for the constant management of important reagent concentrations for quality stability, from installation to operation!

We develop and propose concentration control devices tailored to meet our customers' needs and compatible with various production lines. We custom-manufacture machines that continuously measure the concentration of chemical solutions used in process systems and enable concentration control. The introduction of concentration control devices contributes to stable chemical processing, improving quality and reducing chemical costs. 【Product Examples】 ■ Concentration control device for textile dyeing processing ■ Automatic liquid replacement device for silkette ■ TK SOMAK ■ Starch mixing device ■ Automatic dye weighing system, etc. *For more details, please download the PDF or feel free to contact us.

Omron NX/NJ Series

Achieving both high-speed control and effective information utilization!

■ Integration of sequence control and motion control Supports a wide range of needs with a CPU lineup of up to 256 axes ■ Integration of safety Equipped with Safety over EtherCAT, allowing for the coexistence of sequence control and safety control ■ Integration of machine control and information communication - Equipped with global standard networks in the industry, EtherNet/IPTM and EtherCAT - Equipped with the communication protocol OPC UA, standardized as IEC 62541 (available on some models) - Database connection CPU units can directly store production process data to SQL database servers at high speed - Realization of preventive maintenance systems and quality traceability systems ■ Unified development environment from motion, safety to sensing The automation software Sysmac Studio complies with the international standard IEC 61131-3 Supports motion control function blocks compliant with PLCopen Contributes to reducing programming man-hours through the provision of Sysmac Library, which encapsulates Omron's extensive know-how into function blocks.

Pressurized gas flow control device

Flow synthesis spreading in a gas-liquid two-phase system! Customization available according to customer specifications!

The pressurized gas flow control device is a product that has been uniquely developed for the pressurized flow control necessary for gas-liquid reactions using a microreactor. Customization is possible according to customer specifications, including the type of gas and flow range! *For more details, please download the catalog or contact us directly.

Key Points of Material Strength

Introduction to the damage of mechanical parts and stress concentration and repeated loads in design.

Knowledge of material strength is essential in mechanical design. It is absolutely necessary to avoid machine failures due to insufficient strength, but things do not always go as planned in the world. This document includes information on load types and the tensile strength of materials. Please use it as a "point of material strength." [Contents] ■ Points of Material Strength - Types of Loads - Tensile Strength of Materials - Failure of Machine Parts and Design *For more details, please refer to the PDF document or feel free to contact us.

A-60・A-61 Liquid Level Sensor/Liquid Level Controller

Combination of sensors, liquid level controllers, and temperature controllers is possible.

When the liquid level drops, heating will automatically stop. It is used in combination with a 1KW temperature controller (B-93-YPT-01) and a precision power supply (YPP series). Additionally, when used together with the A-61 liquid level controller, it adjusts the lowered liquid level by adding more liquid. It is also possible to combine the sensor, liquid level controller, and temperature controller.

[Data] Understanding Power Management with PDU and UPS through Manga!

A power strip that measures power consumption remotely and has added on/off control functionality!

This document is a story manga that presents solutions to various concerns using power management products such as PDUs and UPSs. It also introduces the features of the "ATEN PDU," which has added network access capabilities, and the "UPS," which provides backup power for a certain period during a power outage. We hope you can feel our commitment to providing solutions for concerns that seemed possible but were not achievable until now. 【PDU Features】 ■ Remote power On/Off control ■ Auto-Ping and Auto-Reboot functions ■ Power measurement ■ Remote monitoring ■ Delay control ■ Integrated management and visualization *For more details, please refer to the PDF document or feel free to contact us.

[Contract Achievements] Power Control Device for Ultrafast Pulse Lasers

A dedicated power supply unit designed for special equipment. It automatically controls the transition to a safe state.

We would like to introduce our track record of the "Ultra-Short Pulse Laser Power Supply Control Device." This product is a control and interface device for pulse laser power supplies. It processes requests via command communication over a serial connection and returns the results as responses. Additionally, it continuously monitors hardware and automatically controls the transition to a safe state in the event of an anomaly. Various sensors and controllers for controlling and monitoring the pulse laser power supply state can be configured and retrieved using serial commands. 【Features】 ■ Various power supply units ■ Dehumidifying elements ■ Nitrogen valves ■ Shutter drivers ■ Various lamps ■ Motor drivers ■ Various relays ■ Various switches ■ Temperature/humidity sensors ■ Leak sensors, etc. *For more details, please feel free to contact us.

Attitude Control Device for CubeSat 2

A space-grade low-cost attitude control system (including control computer, sensors, etc.) that can be used for three-axis attitude control of ultra-small satellites, CubeSats.

A posture control device that can be used for three-axis attitude control of ultra-small satellites, CubeSats. This device includes an attitude control computer, reaction wheels, magnetic torquers, three-axis geomagnetic sensors, MEMS gyros, sun sensors, and Earth sensors, packaging almost all the equipment necessary for attitude control. Additionally, it is possible to install an optional star tracker and redundant geomagnetic sensors.

Update Case 5 [Commercial Facility] Operational Improvement (Increased Energy Savings through Automated Control)

Added variable speed control based on temperature and carbon dioxide concentration. Improved average energy-saving rate to over 60%.

Before the update, the machine room was located far away, making it almost impossible to use frequency control with inverters. After the update, we improved the average energy-saving rate to over 60% by using temperature sensors and carbon dioxide concentration sensors to control the fan motor with an inverter. 【Features】 ○ Inverter control of the fan motor's rotation speed using temperature sensors and carbon dioxide concentration sensors ○ Target equipment: Inverters for air conditioning units and exhaust fans (400V/30.0kW, 18.5kW) For more details, please contact us or download the catalog.