Control device Product List and Ranking from 278 Manufacturers, Suppliers and Companies | IPROS GMS

Touch Panel Control Development Case Study

Manual driving, automatic cooking, and simultaneous cooking at each level are now possible!

We would like to introduce a case where we developed part of the touch panel control for a steam convection oven. Using the recipe function, data can be managed (registered, deleted, read). Communication between the PC and Ethernet is done using COM macros. Additionally, for Wi-Fi connections, it is necessary to configure the registry for Wi-Fi connectivity. If the image (Picture) exceeds the capacity limit, it will not display correctly, and in that case, we will replace it with lamp or switch parts. It cannot be opened with the standard V-SFT, and an environment setup for COMET is required. 【Control Contents】 ■ Manual operation (steam, combi, hot) ■ Automatic cooking (ingredient search, cooking method search, word search, number search) ■ Simultaneous cooking for each layer (group registration, deletion, search) ■ Core temperature recording after cooking, automatic cleaning function, various setting functions *For more details, please download the PDF or feel free to contact us.

Laser Printing Monitoring and Control Device Development Case Study

Monitoring and control of laser printing devices for semiconductor chip wafers! Aggregating various sensor information and notifying via LAN.

We would like to introduce a case of developing a "Laser Printing Monitoring Control Device" at our company. It consists of a control unit that aggregates various sensor information and notifies the upper device via LAN, along with a dust collection box. The control unit is mobile and mounted on a caster-equipped aluminum frame. It supports operation setting control via LAN and monitoring of operational status. 【Case Overview】 ■ Design Areas: Circuit Design, Mechanical Design, Software Design ■ Notable Technologies: Analog Signal Processing, A/D Conversion ■ Notable Components: Pressure Sensor, Temperature Sensor, Mitsubishi Q Series PLC ■ Tools Used: D2 CAD, AutoCAD *For more details, please download the PDF or feel free to contact us.

Monitoring and control device

Up to 8 various interface panels can be accommodated according to the system.

This device is designed to easily network-enable systems and equipment such as contact signals and analog signals from legacy interfaces. It can accommodate up to 8 external interface boards and sends the collected contact and analog information to the central device via an Intranet. Additionally, it performs contact output control based on commands from the central device.

Automatic density management possible with the overfeed automatic control device 'MM-300'!

The detection density range is 20 to 250 pieces per inch! Introducing a measurement device for the quality of woven and knitted fabrics.

The "MM-300" is a fabric and knit material measurement device. It monitors the fabric density at the setter entrance, makes automatic judgments, and automatically controls the overfeed roll ratio to achieve the standard density. The display and operation utilize a color LCD touch panel, equipped with feed-forward control and feedback control. 【Features】 ■ Monitors the fabric density at the setter entrance and makes automatic judgments ■ Automatically controls the overfeed roll ratio to achieve the standard density *For more details, please refer to the PDF document or feel free to contact us.

Automatic Control Device MMC-01 Control Panel (for Mist Rental)

Automatically controls moisture mist based on temperature, humidity, and timer. Automatically stops operation on rainy days.

This is an announcement from Futaba Lease Co., Ltd. regarding "MMC-01".

Electrical work and automatic control devices

Please consult us regarding electrical work and review of automatic control for equipment renovation and renewal!

Our company handles various electrical construction, system configuration, design, and manufacturing for automatic control of electrical equipment. When reviewing electrical work or automatic control during equipment renovations or renewals, the interactions between equipment construction and electrical-related work can sometimes become complicated, leading to time-consuming adjustments and meetings. Please feel free to consult with us in such cases. We will handle everything from proposals to construction. 【Products We Handle (Examples)】 ■ Industrial Fans ■ Air Conditioning Fans ■ Smoke Exhaust Fans ■ Water Supply Pumps ■ Fire Pumps ■ Land Pumps *For more details, please refer to the related links or feel free to contact us.

Window Automatic Control Device "Super MD"

Supports various windows such as skylights and side windows! Measures wind direction and speed, temperature, humidity, etc., and automatically controls the windows!

The "Super MD" from San Ki Keisou is a dedicated controller for house windows that supports a variety of windows, including skylights, side windows, and sliding windows. It measures wind direction and speed, outside temperature, rainfall, temperature, humidity, and performs control and automatic opening restrictions based on indoor and outdoor conditions. It also supports remote monitoring and alarm notification functions for rain and wind alerts. 【Features】 ■ Sensor input for temperature, humidity, wind direction and speed, outside temperature, etc. ■ Output functions for automatic window opening restrictions and alarms ■ Realizes control according to environmental conditions ■ Supports remote monitoring and alarm notification functions ■ Input for operating external devices *For more details, please refer to the PDF document or feel free to contact us.

Composite Environment Control Device "Super Mini NT 2"

A versatile composite environmental control device that accommodates various greenhouse and house environments through abundant selection outputs.

A versatile composite environmental control device equipped with 1 temperature system and 9 selectable outputs (6 points for open/close output and 4 points for on/off output), suitable for various greenhouse and house environments. The automatic control device features an easy-to-maintain cartridge system. It is designed with a fail-safe mechanism that allows for manual operation in emergencies. Compatible with the Ubiquitous Environmental Control System (UECS). 【Control Outputs】 Fixed Output: 1 system (roof window 1) Selectable Outputs: 9 systems (roof windows, side windows, thermal curtains, blackout curtains, heating, cooling, ventilation fans, alarms, misting, solenoid valves for irrigation, etc.) 【Control Inputs (Sensors)】 Analog: 6 systems (3 temperature points, solar radiation, humidity, CO2, etc.) Digital: 2 systems (wind direction, wind speed) 【Communication Functions (External Communication)】 ■ UECS Communication - By connecting an external communication unit, it supports remote control via the Internet. - Establishes and connects an on-site self-managed communication network using wired and wireless LAN, enabling secure remote monitoring and control without going through the Internet. (Please consult us for network construction for testing facilities and various research institutes.) *For more details, please refer to the PDF document or feel free to contact us.

Greenhouse Ventilation Window Control Device "ATOM 2"

A state-of-the-art controller for efficiently managing the ventilation windows of all agricultural houses.

Volume-type house window dedicated controller. Compatible with various windows such as skylights, side windows, and sliding windows. Temperature settings are knob-operated, allowing for easy management of the temperature inside the house. Completely independent settings with 4 systems; variable temperature in 2 to 5 stages. 【Control Output】 Opening and closing output (powered output) 4 systems Alarm output (non-powered contact output) 1 system 【Control Input】 Temperature sensors 4 points (1 standard, expandable up to 4), wind direction and speed sensor 1 point (only wind speed) Rain alarm 1 point, wind alarm 1 point, alarm input 2 points *For more details, please refer to the PDF document or feel free to contact us.

Remote Power Control / Voltage-Free Contact Output Network-Compatible PDU5005

A device for controlling the power and signals of computers and communication equipment from a remote location via Ethernet LAN/WAN.

It has two independently controllable voltage-free contact outputs (A and B contacts for each system), allowing remote control of power supply and control signal ON/OFF with a maximum of AC250V 5A and DC30V 5A. When powered, it has the capability to send WOL packets (via LAN) for computer startup. Additionally, it features the ability to set operation schedules for automatic operation. It can send reboot or reset signals to communication devices in case of a hang-up. Furthermore, it can be controlled by network management software such as HP Software (formerly OpenView) via rsh or SNMP. For more details, please contact us or refer to the catalog.

System Automatic Driving Management Control Device PM-7050VX

Easily achieve autonomous driving management control - PM-7050VX

- The advanced processor (ARM-based) is individually adopted for monitoring and network control functions, achieving energy efficiency and high performance in a multi-configuration. - Equipped with two standard gigabit LAN ports, it can support high-speed redundant network environments. - It features an advanced security engine that supports HTTPS and other secure communication protocols, ensuring safe and reliable security measures. - It monitors signals from various sensors (such as temperature and vibration) to assist in emergency responses. - It supports power redundancy and network redundancy in environments like data centers. The power supply is modular and supports hot-swapping. - It can integrate and manage multiple automated operation sequences, optimizing both overall and partial operation management. - Through the network, it enables collaboration among multiple PM-7050VX units, making it easy to control operation management for larger systems. - A yearly schedule can be created in advance and easily loaded into the main unit for planned operations. - The status of the power supply, operational conditions, and sensor states can be integrated into higher-level operational monitoring devices. - In case of emergencies, it will notify specific recipients via email (compatible with smartphones and mobile emails).

Network-compatible equipment failure automatic recovery device: Giga Boot

Equipped with a gigabit LAN port as standard! Network-compatible equipment failure automatic recovery device.

The "Giga Boot" is a device that independently monitors network equipment operating in a gigabit network environment (function of the network warning light, "Keiko-chan") and automatically turns the power of the equipment on or off when a failure is detected (ISA power management function), making it a device that easily, safely, and reliably restores network-compatible equipment. [Applications] - Failure monitoring and recovery device for routers, network equipment, and image transfer devices used in video conferencing systems - Failure monitoring and recovery device for IP cameras, recording devices, and network equipment in surveillance camera systems - Failure recovery device for routers and Wi-Fi access point devices in offices

NetEdge「NE1024A (DO 4ch)」

4-channel model for controlling output signal of contact points

The "NetEdge Series" is equipped with the latest IoT (Internet of Things) technology, allowing for monitoring and judgment of information from temperature, humidity, and analog sensors, as well as remote monitoring of input signals and output control. The method of information transmission is based on SNMP (Simple Network Management Protocol) due to the risks associated with using email, such as corporate policy violations and impersonation, as well as compatibility with existing monitoring systems. 【Features】 ○ Only wired LAN is adopted for reliable information transmission, reducing the risk of interference. ○ Equipped with PoE as standard to accommodate existing environments both indoors and outdoors. ○ Abnormalities are notified via SNMP traps when thresholds are exceeded. ○ Supports HTTP protocol, enabling status monitoring via smartphones and tablets. ○ Communication and control with factory and facility monitoring devices are possible using the HTTP protocol. For more details, please contact us or download the catalog.

LoRa wireless remote monitoring and control device WD100 series

Contributing to agriculture/FA/dining/HACCP! Easy installation with long-term operation! "Momoko to Ayaka" suitable for data collection and equipment monitoring control.

The WD100 series "Momoko and Ayaka" is a device that allows for the remote collection of environmental information and control of equipment using a wireless method based on LoRa technology. The system is composed of a measurement and control unit and a data collection communication control server. The measurement and control unit is available in various types according to the data and control requirements. It is designed to be waterproof (IP67) so that it can be installed in both indoor and outdoor environments. The data collection communication control server manages the communication of up to 32 measurement and control units, performs data collection, and oversees and manages the system. It can also be configured to monitor for abnormal values, providing notifications not only for abnormal data but also for communication issues, battery life, and more. Additionally, the system can be easily constructed, allowing for quick integration with existing systems or cloud services. 【Features】 ■ Measurement units come pre-wired with sensors ■ Maintenance-free and long-lasting ■ Suitable for installation indoors and outdoors ■ Excellent monitoring and management functions ■ Capable of long-distance communication ■ Abundant external connections *For more details, please visit the external site or feel free to contact us.

DC48V Rebooter Gigaboot (GB2130A/GB2132A)

Ideal for the communications and broadcasting market! We restore network-compatible equipment easily, safely, and reliably.

Our new product, the "Gigaboot (GB2130A/GB2132A)," specializes in monitoring the status and services of communication equipment that utilizes a DC48V power supply for communication base stations, and also enables remote monitoring, control, and communication. In the event of an anomaly detection or upon receiving commands from a remote location, it can perform power OFF/ON/reboot for the DC48V high current. This contributes to the rapid recovery of equipment installed in locations that are difficult to access for security reasons, ensuring stable internet communication. 【Features】 - Adopts a high-speed, low-power CPU based on the new ARM Cortex architecture - Standard equipped with Gigabit LAN ports - Supports IPv4/v6 - Up to 64 for ping-based liveliness monitoring and up to 32 for service monitoring - GB2130A allows simultaneous control of 2 systems, while GB2132A allows individual or simultaneous control of 4 systems *For more details, please refer to the PDF document or feel free to contact us.

Wi-Fi + DI function equipped Anywhere Alarm-chan [DN-1600WD]

The DN-1600W series features an interface specialized for Wi-Fi functionality! A warning and alarm system without LAN installation in a Wi-Fi environment!

The DN-1600W series, which specializes the interface for Wi-Fi-only functionality, allows for the easy construction of warning and alarm systems in a Wi-Fi environment without the need for LAN installation. It operates as a Wi-Fi client, lighting up or flashing lamps based on commands sent via applications (HTTP, MQTT) and sounding the built-in buzzer to quickly inform surrounding workers and stakeholders of the "status." The DN-1600WD is a model equipped with DI (dry contact signal input) functionality, which directly controls lamps and buzzers from external device contact signals. ■ Features of the "Anywhere Warning Buddy Wi-Fi/DI Function Model" ■ 1. Wi-Fi-only model 2. New features including SNMP trap notifications and MQTT communication (common to DN-1600W series) 3. Compact palm-sized design for easy installation on walls or ceilings 4. Alarm deactivation using hygienic non-contact sensors 5. High visibility with illumination! The lamp lights up in 7 colors of multi-color 6. Low price! Recommended for individual users and bulk purchases ＝＝ For more details, please contact us.＝＝

Input/Output (DIO) Monitoring and Control Device DN-3600A/B

Remote monitoring and control of devices without a network interface using the contact monitoring and control device [DN-3600A/B].

As a foundational device used in data centers, communication facilities, and monitoring facilities, we monitor contact information from power equipment and various sensors, while also performing health monitoring and anomaly detection of IT equipment and network devices used in combination with them. The collected status data can be utilized for equipment operation management, preventive maintenance, and analysis. Remote monitoring and control of devices without a network interface contribute to reducing maintenance labor, improving work management efficiency, addressing labor shortages, and enhancing on-site smart technology. Features of the new product: 1) High-speed monitoring and control of sensor/contact information 2) Health monitoring and anomaly detection of IT equipment 3) Notification function via contact output and audio file playback 4) Remote notification with GbE (Gigabit Ethernet), Wi-Fi, and IPv6 support 5) Integration with PLC (Programmable Logic Controller) via TCP socket communication 6) Integration functions using SNMP commands, rsh commands, and HTTP protocol communication

Non-stop type contact monitoring and control device DN-3810BS series

High reliability and high availability! Designed for use in critical infrastructure such as broadcasting, disaster prevention, transportation, and communications.

The "DN-3810BS Series" is a contact monitoring and control device that enables autonomous switching and uninterrupted operation even in the event of a failure, thanks to its redundant design of the integrated management blade. With network redundancy, it supports autonomous switching in the event of network system errors. Power redundancy allows for continued operation even during power system troubles. The integrated management blade is equipped with an ARM Cortex A53 4-core 64-bit MPU and an ARM Cortex M4 32-bit. Each I/O blade is also equipped with an ARM Cortex M4 32-bit, achieving high-speed performance. 【Features】 ■ Input ports support up to 168 channels, and output supports up to 96 channels. ■ Redundant design for the integrated management plate, network, and power unit, ensuring high speed and high security. ■ Achieves high availability while pursuing high speed and multi-channel capabilities, making it suitable for mission-critical situations. *For more details, please refer to the PDF document or feel free to contact us.

Pulse-compatible digital input/output device 'WD100-GWPIO'

Contributing to the operational management and visualization of facility equipment! Converting to the original physical quantities and aggregating them.

**Features** - Dual-channel simultaneous measurement with one unit - Two sets of pulse measurements can be connected to a single measurement unit. - Long-distance communication via LoRa wireless technology - Communication is possible over 11 km in line-of-sight conditions and over 3 km in dense areas. *Note: Communication distance is affected by terrain and obstacles.* - Low power consumption - Approximately 2W of power consumption, making it easy to supply power for outdoor use. - Installable indoors and outdoors - Outdoor use is possible with a waterproof cabinet, and it can withstand temperature changes from -20°C to +70°C. - Accumulation of converted physical quantities - Pulse accumulation values/instantaneous values are scaled and converted into the physical quantities being measured, and data is accumulated. - Compatible with WD100 series measurement units - Data can be centrally collected in combination with existing environmental measurement units of the WD100 series. *For more details, please refer to the PDF document or feel free to contact us.*

First Gate Co., Ltd. General Catalog

Quickly provide technological innovations in semiconductor manufacturing equipment as an import trading company.

The "First Gate Corporation Comprehensive Catalog" is the comprehensive catalog of First Gate Corporation, which engages in the import and export sales of semiconductor manufacturing equipment and inspection equipment, as well as technical support. This catalog introduces products such as semiconductor manufacturing components including "Teflon flow meters," "flow controllers," "Teflon chemical supply pumps," and "various heaters." [Contents] ■ Company Overview ■ History ■ Product Lineup *For more details, please contact us or download the catalog.

Significant cost reduction for three-dimensional automated warehouses with APT-style renewal!

Leave existing equipment as is and support maintenance for other manufacturers! "APT-style renewal" allows for significant reduction in management costs.

Would you like to review the costs related to your current automated warehouse with an APT-style renewal? Automated warehouses can become costly, especially with updates to management computers and control devices, as well as daily inspections and repair work... However, none of these amounts can be ignored. Our company has a track record of updating management computers and control devices for all automated warehouse manufacturers, as well as performing repairs and inspections, making us the only system engineering company in the country with 28 years of experience. We have completed 450 projects. Even if it's a minor issue, please feel free to consult with us. (For more details, please comment through the contact form below or inquire via the catalog download.)

Prevent forgetting to tighten screws! 'Screw Star σ'

Counter for discovering and preventing forgotten tightening of screws (careless mistakes)

● This is a control device designed to be used in combination with an electric screwdriver to detect and prevent "forgotten screw tightening (human error)" and "incomplete screw tightening." ● It automatically measures the screw tightening time, making it easy to set up. (Manual settings allow for precise adjustments.) ● With the second timer setting, it can stop the screwdriver's rotation. (It alerts you when a long screw is mistakenly tightened.) ● It can memorize eight different screw tightening patterns and perform screw tightening by combining them sequentially. ● It is equipped with various I/O terminals, allowing for connection with automated machines. ● Even if multiple screwdrivers are used, you can increase the number of units through a daisy chain and control the screwdrivers in the order of operation. * For more details, please refer to the catalog. For inquiries, please contact Koyama Co., Ltd.

Alarm Control Device 'AL-TypeC'

Introduction of an alarm unit that directly drives an alarm device with signals from OSNET measuring equipment.

The "AL-TypeC" is an alarm unit that connects to devices such as graphing extensometers, wire sensors, and rain gauges to directly drive alarm devices like rotating lights and sirens. There are two alarm inputs. The alarm output also has two systems: timer-linked and continuous. 【Features】 ■ Directly drives alarm devices such as rotating lights and sirens ■ Two alarm inputs ■ Two systems for alarm output: timer-linked and continuous *For more details, please refer to the PDF document or feel free to contact us.

[Example] External control device using air

External control device using air from the pharmaceutical manufacturing line.

It was used in the manufacturing line of pharmaceutical company K's products. The existing equipment had maintenance issues due to being imported, so we switched to domestic products, which required performance and quality equal to or greater than the previous ones, and we successfully achieved that. For more details, please contact us.

Air-fuel ratio control device

We provide a preset system that determines the opening degrees (16 points) of the gas and air control dampers through touch panel operation to control the air-fuel ratio. We are also developing a feedback system (automatic control based on gas and air flow). ■ Equipment Features - Reduction of spare parts and maintenance costs. - Improved operability, accuracy, and responsiveness. - Enhanced operability through touch panel operation. - Possible reduction of running costs compared to proportional valve systems. ■ Equipment Applications Air-fuel ratio control introduced in burner equipment.

Humidity control device [*Free demo unit available!*]

No large-scale equipment is needed for humidity control! Achieve localized humidity control quickly and at low cost.

☆★Demo units available for loan☆★ We also lend out compressors and tubes. If you are in the Tokyo area, we can also visit you directly for installation! Please feel free to contact us! ■This is a device for controlling humidity in confined spaces. Our humidity control unit is compact and can control humidity in relatively small spaces such as glove boxes, desiccators, and incubators with a volume of up to 150L. It is used in university laboratories and research facilities where experiments and tests need to be conducted under controlled humidity conditions. This device has a proven track record in moisture control for raw material storage and static electricity prevention during winter. If you are considering precise humidity control, please feel free to contact us. ~Dehumidification modules for the device are available for individual sale~ https://www.ipros.jp/product/detail/2000237525 ■Inquiries about the product - Industrial Filter Sales Department, Eastern Japan Sales Office TEL: 03-5568-9281 - Industrial Filter Sales Department, Western Japan Sales Office TEL: 06-6533-0360

『IC Auto door touch』

Change automatic doors to IC authentication gates! No more power operations in the morning and evening or unlocking and locking with keys!

The "IC Auto door touch" is a device that enables time control for automatic doors. Simply replace the existing touch switch's subunit! There is no need for power operations in the morning and evening or for locking and unlocking with a key; you can freely set the time for entry and IC authentication. Additionally, it allows for easy management of up to 10,000 history logs, and you can register up to 10,000 IC cards such as Felica and Mifare. 【Features】 ■ Enables time control for automatic doors ■ Usable by simply replacing the existing touch switch's subunit ■ Freely set the time for entry and IC authentication ■ Easy management of history logs (up to 10,000 entries) ■ Can register up to 10,000 IC cards such as Felica and Mifare ■ Prevents wandering and other issues in advance *For more details, please refer to the catalog or feel free to contact us.

[Data] Control of DC Motors

A method to forcibly short-circuit the terminals of the motor to stop it! Explanation with illustrations.

This document introduces the control of DC motors. It includes a wealth of information on topics such as "control by resistance," "brake operation (short-circuit brake)," and "bidirectional drive of DC motors using transistors." Additionally, it provides detailed explanations on "PWM control (Pulse Width Modulation)" and "electrical noise countermeasures." Please take a moment to read it. 【Contents】 ■ Control by resistance ■ Brake operation (short-circuit brake) ■ Bidirectional drive of DC motors using transistors ■ PWM control (Pulse Width Modulation) ■ Electrical noise countermeasures *For more details, please refer to the PDF document or feel free to contact us.

Ignition control device "Igniter BM4"

Easy to install and optimizes the ignition process! Ignition fans that are often installed in apartments.

The "Igniter BM4" is an ignition control device specifically developed for installation in wood chip and pellet heaters. The interface is carefully selected, allowing for easy installation of the ignition blower in any type of combustion furnace. Additionally, the quietness of the ignition fan has improved by 10 dB(A), making it particularly suitable for small heating containers. 【Features】 ■ Easy installation ■ Optimized ignition process ■ Suitable for various heating containers ■ Fully arranged plugs *For more details, please download the PDF or feel free to contact us.