Control device Product List and Ranking from 276 Manufacturers, Suppliers and Companies

Die-cast mold temperature control device "Shuttle Cooler"

Control of cooling time is possible by flow path! A system for preventing overcooling and seizure in die-casting molds.

The "Shuttle Cooler" is a temperature control device for die-casting molds that contributes to cycle-up through thermal release and suppresses product distortion and deformation. Since the RO water and media used in the tank are recycled, there is no wastewater, making it economical. Enhanced internal cooling reduces the need for external cooling with release agents, thereby decreasing the amount of release agent used. Additionally, it can alternately send water and air through the same piping, allowing for high-pressure supply to circuits as needed for each water pipe. 【Features】 ■ More stable mold shaping ■ Economical with the recycling of RO water and pure water ■ Shortened air blow time due to enhanced internal cooling ■ Equipped with a memory function for mold setting conditions ■ High-pressure water supply enables cooling of thin core pins and more *For more details, please refer to the PDF document or feel free to contact us.

Company：カンネツ
Price：Other

Cooling system
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magical Ten-Key Unit Controller DMT-003C-24V 24V

The position of the numbers on the keypad changes every time you use it; it is a high-security keypad.

■The display position changes every time. There are 6 patterns for the numeric keypad display, and the display position changes each time it is used, so there is no specific area that becomes discolored or worn. *Depending on the settings, the arrangement of the numbers can also be displayed randomly. ■Anti-peeping function The numeric keypad operation area uses polarized glass, so there is no worry about a third party peeping at the PIN code. ■Operation prohibition function You can prohibit numeric keypad operation with external contact signals, allowing for operations such as preventing entry during security monitoring linked to a security system. ■Vandalism prevention function If the PIN code is entered incorrectly 5 times in a row, a warning sound will sound for 10 seconds, and operation will be disabled for 3 minutes, which helps deter unauthorized unlocking of the electric lock due to vandalism. ■User-friendly features and specifications ●Up to 2 operation devices can be connected to one controller, allowing for control of both entry and exit. ●Settings such as the PIN code will not be lost even in the event of a power outage. ●The operation area has a protection rating of IPX5, allowing it to be installed in locations exposed to direct rain, such as the exterior walls of buildings.

Company：セキュリティハウス
Price：Other

Entrance and exit control system
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Change the way air conditioning is used, without relying on the set temperature.

Unraveling misconceptions about air conditioning energy savings and moving towards the correct energy-saving mindset.

In many stores and facilities, the following responses are commonly practiced: "When it's hot → lower the set temperature" "When it's cold → raise the set temperature." While this approach is indeed effective as a temporary measure, it can often be counterproductive from an energy-saving perspective. This is because the set temperature is merely a "number on the control panel," while the actual adversaries that the air conditioning system is battling are the indoor load and the invisible "losses." **Typical examples where changing the set temperature yields no effect:** - High humidity prevents a decrease in perceived temperature - Disruptions from kitchens or backyards flow in - Cold air from showcases disrupts the air conditioning airflow - Airflow is short-circuited and not circulating - There are significant temperature variations between the ceiling and floor All of these are "problems that cannot be resolved by adjusting the set temperature." The first step in energy saving is to read "temperature × humidity × indoor behavior" instead of focusing on the "set temperature." The correct approach to energy-saving in air conditioning is to shift the focus from "the number of the set temperature" to "the state of the space itself."

Company：AIP
Price：Other

air conditioning
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Type opening control device "Super Lock"

A self-developed mold opening control device boasting remarkable durability and reliability.

"Super Lock" is a locking (tension) device developed through unique design, featuring twin rollers with an internal roller and an external lock roller, a center adjustment bolt, and a U-shaped lock bush, to accommodate the precision and automation of molds. The combination of a disc spring, internal roller, and external lock roller allows for balanced roller rotation, providing excellent stability for mold opening and closing. Additionally, the design alleviates the back of the lock guide, making it less likely for issues such as binding or variations in lock load to occur, even if there are steps in the assembly of the mold. 【Features】 - The lock bush is designed to be symmetrical, allowing for reuse by flipping it over even if one side wears out. - The mechanism allows for easy adjustment of the strength of the left and right rollers using an adjustment bolt. *For more details, please download the PDF or feel free to contact us.*

Company：アイユーキ技研
Price：Other

Other machine elements
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Type opening control device "Yuki Lock"

Release bar-based mechanical structure mold opening control device

A mold opening control device using a release bar. The structure operates the lock and unlock mechanisms mechanically due to the special shapes of each component.

Company：アイユーキ技研
Price：Other

Plastic Mould
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Move the 【Yukirock】 type closing slide lock forcibly to the locked position.

When closing the mold, forcibly move the slide lock to the locked position at the sloped edge of the release bar tip.

"Yukirock" is a mold opening control device developed and manufactured by our company in Japan. It operates mechanically due to the special shapes of the release bar, slide lock, and cam lock. Please feel free to contact us if you have any inquiries. [Applications] ■ Molds with a three-plate structure - Multi-point gating with small diameter pinpoint gates - Suitable for a variety of products and large quantities ■ Mold opening control device - Necessary to determine the order of plate opening in a three-plate structure mold - When injecting molding, the runner stripper plate opens first to automatically cut unnecessary gate portions within the mold. *For more details, please refer to the PDF document or feel free to contact us.

Company：アイユーキ技研
Price：Other

Other machine elements
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction of 3 products for injection molding mold opening and closing control devices

Stabilize the opening and closing operation of the mold to improve the productivity of injection molding. High-quality made in Japan.

We offer a range of high-quality "Mold Opening and Closing Control Devices" that are developed in-house and manufactured domestically. 【Product Lineup】 ■ Mold Opening Control Device "Super Lock" The newly developed Super Lock boasts excellent durability and resistance to wear. It allows for load adjustment with a single bolt, making setup easy. The internal and external rollers rotate in a balanced manner, ensuring stable mold opening and closing operations. The lock bush, designed symmetrically, can be inverted for use even if one side wears out. ■ Mold Opening Control Device "Yuki Lock" With a mechanical structure of a release bar and slide lock, it ensures reliable opening and closing operations. It forcibly releases the parting line to prevent damage to components, contributing to reduced production loss and improved productivity. It can operate regardless of the order of mold closing. ■ Mold Opening and Closing Control Device "Duro Lock (in development)" This device shares common components and production processes with "Yuki Lock," aiming for cost reduction. It controls both mold opening and closing with only one internal component. Its simple structure also features a low risk of component damage. *For more details, please refer to the PDF document.

Company：アイユーキ技研
Price：Other

Injection Molding Machine
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TIETECH

We provide a variety of solutions in a one-stop manner, including automation tools, control tools, image evaluation and processing tools, and inspection equipment!

"TIETECH" is a product brand that is responsible for the robotics business within the business domain of Techno Horizon Corporation, which encompasses "Video & IT" and "Robotics." We propose automation and labor-saving solutions using motor control and image/X-ray inspection equipment to address issues of decreased productivity caused by a shortage of workers and the concentration of work on specific operators in response to automation needs. Additionally, for tasks such as visual inspections that place a high workload on personnel, we provide inspection equipment that utilizes X-ray, 3D, and AI image processing technologies, offering high precision and stable performance. 【Service Offerings】 ■ Robot Control Business ■ Inspection System Business *For more details, please refer to the related links or feel free to contact us.

Company：テクノホライゾン
Price：Other

Other industrial robots
X-ray inspection equipment
Other inspection equipment and devices
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Eco Gas" Arc Welding Gas Regulator [Equipment and Environmental Business]

It is a control device for shielding gas used in MIG/MAG welding. It reduces shielding gas by up to 60%!

This is the electric shield gas automatic control device "ECO-GAS." Would you like to reduce the usage of shield gas, which accounts for a significant portion of indirect material costs at welding sites? Currently, you can try out a test unit for free for one week! 【Product Features】 - Automatic suppression of excess gas - Automatic optimization of shield gas flow rate in accordance with welding current values - Visualization of real-time shield gas flow rate and cumulative usage - Timely notification of abnormalities through gas shortage and gas leak alarms For more details, please feel free to contact our Environmental Business Department. Phone number: 03-5295-0930 (main line) Dedicated email address: Gr_HTJ_pr_HP_Equipment@hondatrading.net Related link: https://www.hondatrading.com/business/equipment_dies_molds/

Company：ホンダトレーディング
Price：Other

Other energy equipment
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wireless Remote Control Device "Octopus"

Long-lasting use with 2 AA batteries! A newly upgraded compact model has been added to the lineup.

"Octopus" is a wireless remote control device equipped with comprehensive safety and management options. It features a communication technology that uses frequency hopping in the 920MHz band, making it less susceptible to radio interference from the same frequency. It comes standard with an integrated protector that safeguards both the operating surface and the sides. Additionally, you can choose between two models: one with single push (8 points, 9 operations) and one with double push (8 points, 15 operations). 【Features】 ■ The switch operation feel inherits from the current series ■ Approximately 150 hours of continuous transmission with alkaline batteries ■ Compatible with commercially available rechargeable nickel-metal hydride batteries ■ Ability to check communication status ■ Comprehensive safety and management option features *For more details, please refer to the PDF document or feel free to contact us.

Company：スズキ機械エンジニアリング部
Price：Other

Remote Control
Other process controls
crane
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic Control Device for Cooling Water System Chemical Concentration 'Orchaser IV'

Real-time display of drug concentration! It can prevent corrosion, scale, and slime issues.

"Orcheiser IV" is an automatic control device for the concentration of cooling water treatment chemicals. Typically, the management of the concentration of cooling water treatment agents cannot respond in real-time to changes in the operation of cooling tower equipment, which can lead to issues such as corrosion, scale, and slime. This product solves such problems by measuring the chemical concentration in real-time and automatically controlling it to always maintain the target concentration. [Features] - Automatic control of chemical concentration at all times - Real-time display of chemical concentration - Compatible with a wide range of supply water qualities, including tap water and industrial water *For more details, please refer to the PDF document or feel free to contact us.

Company：DAIWA
Price：Other

Flow Control
Other measurement, recording and measuring instruments
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eddy Current Dynamometer Control Device "DY-1000"

Measurement of rotation speed, water supply torque, excitation voltage, etc. is also possible! Achieving a high-precision, high-functionality controller.

The "DY-1000" is an eddy current dynamometer control device that controls and measures an eddy current dynamometer connected to an engine. It is capable of operating the test engine and transmission installed on the stand in a stable condition according to testing purposes. The operation control can perform constant speed control, constant torque control, and constant current control. Additionally, for safe operation, it has abnormal monitoring functions for the dynamometer and controller, and in the event of an anomaly, it safely stops the dynamometer and the test device. 【Features】 ■ Capable of controlling all models of eddy current electric dynamometers from 2.2kW to 750kW ■ Adopts digital PID in the control system, achieving a flexible, high-precision, and high-functionality controller ■ For the protection of the dynamometer and test device, current limiting functions per rotation can be easily set ■ Various emergency stop input functions are well-equipped ■ Capable of running resistance mode and no-load operation *For more details, please refer to the PDF document or feel free to contact us.

Company：ピーマックス
Price：Other

Torque Control
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vehicle Autonomous Driving Measurement and Control Device

Quality assurance applications! A total system from automated testing and measurement to result processing.

The "Vehicle Autonomous Driving Measurement and Control Device" is a testing facility that conducts tests on vehicle durability, performance, and driving simulations on a chassis roller. It primarily consists of a personal computer system, a driving measurement control panel, an onboard pedal operation robot device, and a relay box for measurement and control signals. It is a total system that encompasses everything from autonomous driving and automatic measurement to result processing. We offer a lineup of devices suitable for testing the general performance of completed vehicles and exhaust durability, including the "Vehicle Durability Chassis Dynamometer Control Device," "Vehicle Autonomous Driving Device," and "Automated Driving Robot Device for Anechoic Chambers." 【Lineup】 ■ Vehicle Durability Chassis Dynamometer Control Device ■ Vehicle Autonomous Driving Device ■ Automated Driving Robot Device for Anechoic Chambers *For more details, please refer to the related links or feel free to contact us.

Company：ピーマックス
Price：Other

Other measurement, recording and measuring instruments
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Engine Autonomous Driving Measurement and Control Device

Support for exhaust gas transient mode! A total system from automated driving and automated measurement of test content to result processing.

The "Engine Automatic Driving Measurement and Control Device" is a testing facility that combines a dynamometer with an engine installed on a stand to conduct tests on the durability, performance, and exhaust emissions of the engine or its components. It mainly consists of a personal computer system, a measurement and control panel, an engine throttle actuator device, and a relay box for measurement and control signals installed in the engine room. This is a high-performance model suitable for testing the exhaust performance of gasoline/diesel engines and for transient mode testing. 【Features】 ■ A standard model suitable for general steady-state and durability testing of gasoline/diesel engines ■ Particularly suitable for testing the exhaust performance of gasoline/diesel engines and for transient mode testing *For more details, please refer to the related links or feel free to contact us.

Company：ピーマックス
Price：Other

Other measurement, recording and measuring instruments
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Transmission automatic driving measurement control device

Ideal for high-load endurance testing! A total system from automated driving and automatic measurement to result processing.

The "Transmission Automatic Driving Measurement Control Device" is a testing facility designed to conduct durability and performance tests on transmissions (M/T, A/T) or their components installed on a test bench. It primarily consists of a personal computer system, a driving measurement control panel, an engine, a clutch and transmission operation actuator device, and a relay box for measurement and control signals. It is a total system that automates driving and measurement of test content and processes the results. 【Features】 ■ Suitable for general performance and high-load durability tests of engine-driven transmissions. *For more details, please refer to the related links or feel free to contact us.

Company：ピーマックス
Price：Other

Other measurement, recording and measuring instruments
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Actuator control device

The servo motor is the power source! We have a lineup of vehicle-mounted driving robots and more.

The "actuator control device" is a product that remotely operates the controls (accelerator/clutch/brake pedals, throttle lever, gear lever, etc.) of the test subjects (vehicles, engines, transmissions, etc.). It is an electric actuator that uses a servo motor as the drive source and consists of a drive amplifier unit, electric actuator, stroke setting box, and connection cables. By operating the controls of the test subjects individually, it can be incorporated into systems such as engine automatic driving measurement devices, transmission automatic driving measurement devices, onboard robot systems, and load control devices for operation. 【Product Lineup】 ■ Onboard driving robot ■ Onboard driving robot for radio wave anechoic chambers ■ High-speed throttle actuator ■ Low-speed throttle actuator ■ M/T transmission actuator ■ General-purpose actuator *For more details, please refer to the related links or feel free to contact us.

Company：ピーマックス
Price：Other

Remote Control
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eddy Current Dynamometer Control Device "Dynamo Controller"

Maintain a stable operating condition according to the purpose of the test! Driving considering rolling resistance is also possible.

The "Dynamo Controller" is a control device for an eddy current electric dynamometer connected to an engine. It connects to the eddy current dynamometer to implement control based on constant speed, constant torque, and running resistance. It is capable of controlling all models with a capacity range of 2.2 kW to 750 kW. For safety, it is equipped with an emergency stop function that transitions to no-load operation in the event of an abnormal situation. The dynamometer's rotational measurement and torque measurement amplifiers are standard equipment. 【Features】 ■ Connects to an eddy current dynamometer for control based on constant speed, constant torque, and running resistance. ■ Capable of controlling all models with a capacity range of 2.2 kW to 750 kW. *For more details, please refer to the related links or feel free to contact us.

Company：ピーマックス
Price：Other

Torque Control
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

System integration technology

We provide highly versatile system products by integrating various foundational technologies, including servo control technology!

At the Tohmei Industrial Systems Product Division, we develop a wide range of system products that integrate various core technologies and propose suitable systems that meet our customers' needs. We integrate various technologies such as electric control, displacement control, pressure control, and speed control. In constructing specific systems, we utilize computer analysis, such as mathematical simulations, to clarify dynamic behavior and build the systems. 【System Products (Excerpt)】 ■ Electric Control: Drive Simulator, Oscillation Device, Measurement Device ■ Hydraulic Control: Pressing Device, Performance Testing Machine, Multi-Channel Material Fatigue Testing Machine ■ Pneumatic Control: Ejection Seat Training Device, Steady Load Device for Large Actuators ■ Displacement Control: Drive Simulator, Oscillation Device, Self-Propelled Cart ■ Acceleration Control: Aircraft Jacking and Weighing Device, Wheel Axle High-Speed Rotation Testing Machine *For more details, please refer to the related links or feel free to contact us.

Company：東明工業システム製品事業部
Price：Other

Pressure Control
Temperature and Humidity Control
Torque Control
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Clean Chamber for Clean Room Internal Equipment

Temperature fluctuation accuracy can be achieved from 0.1℃ to 0.002℃! We also accommodate requests for low humidity specifications of 5-40% RH.

The "Thermal Clean Chamber" is an internal device for clean rooms with a cleanliness level of ISO Class 4 (Class 10). It employs a PID control, ultra-precise components, and an airflow system tailored for temperature accuracy, with temperature fluctuation precision possible from 0.1℃ to 0.002℃. Additionally, humidity control is available not only in the standard specification range of 40-60% RH but also in response to requests for low humidity specifications of 5-40% RH. 【Features】 ■ Cleanliness level of ISO Class 4 (Class 10) ■ Temperature control possible within ±0.1℃ to ±0.005℃ ■ Customizable design to fit built-in devices ■ Safety considerations through multiple protection circuits *For more details, please refer to the PDF document or feel free to contact us.

Company：日本エアーテック本社
Price：Other

Other clean room equipment and facilities
Other safety and hygiene products
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose three-phase squirrel-cage induction motor control device "MITY SERVO"

Into the world of servos with MITY.

The "MITY SERVO" is an ALL-IN-ONE servo controller that, by adopting a microcomputer, not only covers variable speed drives for induction motors but also the area of positioning control through pulse input from rotary encoders, and it also incorporates sequencer functionality. It features a motor language developed by our company called QMCL (Quick Motion Control Language), which allows for the quick assembly of programs suited to the machine, enabling easy reconfiguration and modifications. Please feel free to contact us if you have any inquiries. 【Features】 ■ Wide selection of capacities ■ Built-in positioning function ■ Built-in sequencer function ■ Capable of accepting analog inputs ■ Displays error codes *For more details, please download the PDF or feel free to contact us.

Company：MSテクノ
Price：Other

Servo motor
Servo
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Poultry House Central Control System "Choatronics 3"

You can obtain a wealth of essential information from the current status screen.

"ChaoTronics 3" is a control device for the entire chicken coop that instantly displays graphs in color and features an easy-to-use touchscreen. The colorful graphics introduce new technology for data presentation, providing a variety of data including graph temperature, relative humidity, mortality rate, water consumption, and more. Please feel free to contact us if you have any requests. 【Features】 - 10-inch (25 cm) screen with vibrant colors, easy to operate with fingers - Direct touch operation on the screen - Optional operation with a USB mouse - Sturdy, expandable platform - Design that allows for easy addition of future features, etc. *For more details, please download the PDF or feel free to contact us.

Company：イシイ周辺事業部
Price：Other

Instrumentation and Control Systems
Graph Analysis
Other Software
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LLC Oil Temperature Control Device

Maintain the engine coolant (LLC) and oil (OIL) at the set temperature according to the load variation!

We would like to introduce our "LLC Oil Temperature Control Device." It maintains the engine coolant (LLC) and oil (OIL) at a set temperature according to the load variation. The control system adds a multi-point PID system to the conventional feedback control. Additionally, there is a system that performs predictive control by inputting the operating signals from the test program side, allowing it to respond to various load changes. 【Features】 ■ Maintains engine coolant (LLC) and oil (OIL) at a set temperature according to load variation ■ Adds a multi-point PID system to the conventional feedback control ■ Responds to various load changes *For more details, please download the PDF or feel free to contact us.

Company：大西熱学
Price：Other

Environmental Test Equipment
Engine parts
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic isolation deck

Reduces pallet sway by approximately 1/4! Can be installed only in necessary areas.

At Hardy Create, we offer seismic isolation decks that reduce the risk of falling objects, which can cause human and material damage. By allowing sliding not only in the depth direction but also in the width direction, it makes it difficult for vibrations to be transmitted from the rack to the pallet, and the damping rubber absorbs that energy. Two seismic isolation decks are required for one pallet. They can be freely installed on a pallet basis, allowing you to install them only in the upper sections of the rack or in areas where you particularly want to prevent falls. 【Features】 ■ Reduces pallet vibrations by approximately 1/4 ■ Can be installed only in necessary locations *For more details, please refer to the related links or feel free to contact us.

Company：ハーディクリエイト
Price：Other

palette
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【EMS (Design and Production Contract Services)】Performance Introduction

Certified with ISO13485! We have a wealth of achievements in various fields of medical devices.

OKI provides EMS (Engineering and Manufacturing Services). We cater to various manufacturing outsourcing needs, including proven information and communication equipment, industrial equipment (mechatronic devices), measurement instruments, aerospace, electrical equipment, and factory automation. Additionally, our Honjo factory, which has received ISO 13485 certification and obtained a manufacturing license under the Pharmaceutical Affairs Law, boasts numerous achievements in the field of medical devices. 【Areas of Achievement】 ■ Medical ■ Industrial ■ Measurement ■ Information and Communication ■ Aerospace and Electrical Equipment *For more details, please refer to the PDF document or feel free to contact us.

Company：沖電気工業産業営業本部　産業営業統括室
Price：Other

Other contract services
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rensui Cubic Walker System II

Not only reducing the amount of drug injection, but also improving inspection work efficiency and achieving cost reduction through labor-saving measures!

The "Rensui Cubic Walker System II" is a chemical injection device and remote monitoring system for cooling towers that manages appropriate blowdown volume and chemical concentration through control linked to load fluctuations of the cooling tower. By remotely monitoring a system that is always in operation, it is possible to check past data and operating conditions. Not only does it reduce the amount of chemical injection, but it also improves inspection work efficiency and reduces labor, achieving cost savings. 【Features】 ■ Automatic chemical concentration control ■ Conductivity blowdown control ■ Remote monitoring *For more details, please refer to the related links or feel free to contact us.

Company：三菱ケミカルアクア・ソリューションズ排水処理事業部
Price：Other

cooling tower
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric furnace control device

Leave the electric furnace control system to us.

Our company designs and manufactures temperature control, atmosphere control, transport control, alarm monitoring safety circuits, and more for various electric furnaces. Our technology is fully demonstrated in key applications such as semiconductor manufacturing, heat treatment of iron and aluminum, carbon fiber, ceramics manufacturing, and magnetic materials production. Additionally, we also accept orders for the production of dry-type transformers (H type) and C-type changeover switches (tap changers). 【Control Methods】 ■ Various feedback controls (power, current, voltage, etc.) ■ Cascade control (temperature/temperature, temperature/flow rate, etc.) ■ Gas blender control (atmospheric gas control using mass flow controllers) ■ PLC control *For more details, please download the PDF or feel free to contact us.

Company：白光電気
Price：Other

others
Control device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Attention those in the electric power and water resource sectors!] Wastewater treatment control device

Advanced wastewater treatment technology through ecosystem control! Introducing our products.

We would like to introduce the "Wastewater Treatment Control System" that we handle. Starting with sedimentation tank equipment, we offer various wastewater treatment devices such as combined flow improvement equipment, water treatment equipment, advanced treatment systems, sludge treatment equipment, and deodorization equipment, along with environmentally friendly wastewater treatment control technologies that achieve energy saving, space saving, and environmental consideration in wastewater treatment. In addition to this system, we also provide various products related to power and water utilization, such as dam gate control systems and fuel transport systems. 【Features】 ■ Environmentally friendly wastewater treatment control technology ■ Achieves energy saving, space saving, and environmental consideration in wastewater treatment *For more details, please download the PDF or feel free to contact us.

Company：金陵製作所本社工場
Price：Other

Other process controls
Other water treatment equipment
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Must-see for those in the paper and printing industry! Screen printing machine control device.

Strongly supporting adaptation to change through experience in diverse industries and operations!

The device is a controller for a screen printing machine capable of high-speed continuous printing. Each screen achieves high-speed printing with high precision, free from printing misalignment, through synchronized control using servo motors. Our company produces the controller for this high-speed printing machine. In addition to this device, we also offer various products in the field of paper materials and printing-related areas, such as high-speed multi-color printing machine controllers and high-speed rewinding machine controllers. 【Features】 ■ Controller for a printing machine capable of high-speed continuous printing *For more details, please download the PDF or feel free to contact us.

Company：金陵製作所本社工場
Price：Other

Other process controls
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Must-see for those in government and public sector related fields!] Sludge treatment equipment control device

Composed of display devices and control panels! Providing various control systems for the central monitoring room.

We would like to introduce the "Sludge Treatment Equipment Control Device" that we handle. This is a central monitoring control device for drainage equipment, water treatment equipment, and sludge treatment equipment used in sewage treatment plants and pumping stations. Our company provides a system composed of display devices, control panels, remote input/output panels, file servers, and more. In addition to this device, we also offer various products related to government agencies, such as tunnel ventilation and measurement control devices, and waste treatment facility input control devices. [Features] ■ Provides various control systems for central monitoring rooms ■ Composed of display devices, control panels, remote input/output panels, file servers, etc. *For more details, please download the PDF or feel free to contact us.

Company：金陵製作所本社工場
Price：Other

Other process controls
Wastewater/wastewater treatment equipment
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[A must-see for those in the aerospace field!] Wind tunnel control table

We provide equipment that focuses on instructions in wind tunnel testing devices! High precision and high-speed measurement and computation processing are required.

We would like to introduce the "Wind Tunnel Control Table" that we handle. This is a facility that focuses on instruction, monitoring, measurement, and analysis using wind tunnel testing equipment in the aerospace field. It requires high-precision and high-speed measurement and computation. In addition to this equipment, we also offer products related to the aerospace field, such as wind tunnel testing equipment control devices. 【Features】 ■ A facility that focuses on instruction, monitoring, measurement, and analysis using wind tunnel testing equipment ■ Requires high-precision and high-speed measurement and computation *For more details, please download the PDF or feel free to contact us.

Company：金陵製作所本社工場
Price：Other

Machinery and equipment installation/dismantling/relocation
Other process controls
Control device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Control device Product List and Ranking from 276 Manufacturers, Suppliers and Companies | IPROS GMS

Control device Manufacturer, Suppliers and Company Rankings

Control device Product ranking