Dryer Product List and Ranking from 26 Manufacturers, Suppliers and Companies

Eco-friendly measures: Energy-saving examples of vacuum dryers

Moisture evaporates from sludge even at low temperatures! We have successfully reduced industrial waste disposal costs!

The sludge generated from our factory contained a lot of moisture, which increased its volume, making the waste disposal costs quite high and problematic for us. In an effort to reduce these costs, we searched for methods to decrease the volume and mass of the sludge. The vacuum dryer creates a state close to a perfect vacuum, and when we introduce the thick sludge that contains a lot of moisture, the moisture evaporates from the sludge even at low temperatures. The thick sludge transforms into a powdered state, reducing its volume. We were able to lower the disposal costs for the sludge, and the fuel required for drying was also less than that of other devices, which was a decisive factor. [Overview] ■ Equipment: Sludge treatment equipment ■ Industry: Plating factory ■ Effect: Environmental improvement *For more details, please refer to the PDF document or feel free to contact us.

Company：大島電気
Price：Other

Wastewater/wastewater treatment equipment
Water treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powder and Soil Dryer PW Series

Optimal for drying powdered substances dissolved in water, soil, mud, or plant-based samples containing a large amount of water, using horizontal airflow circulation and a variable airflow device in shallow containers.

- The horizontal wind circulation system allows air to flow from left to right within the chamber, making it difficult for the wind to be obstructed even when samples are stacked on multiple shelves, thus demonstrating sufficient drying capability. - A 10-level adjustable airflow device and slide shutters on the left and right sides of the chamber that can regulate the intake and exhaust of air help prevent the scattering of powders and fine leafy materials. - The -HL and -HG models feature a double-door design without a center pillar, allowing for the storage of large and long samples. - The all-stainless steel construction is clean and highly weather-resistant, making it suitable for installation in locations such as barns for agricultural products or food manufacturing areas. - By concentrating electrical components at the top of the unit and providing a slope and drainage outlet at the bottom, the chamber can be washed out, allowing for the removal of dirt and grime accumulated during the drying process. - The temperature setting range is broad, from room temperature +10°C to 200°C, enabling not only drying but also constant temperature heat treatment such as sterilization. - Up to 8-step multi-temperature programs can be set. - A manual damper that allows for fine adjustment of the exhaust opening is included as standard. - A measurement hole for inserting a temperature sensor to measure the sample temperature is included as standard.

Company：アルプ
Price：1 million yen-5 million yen

Thermostatic chamber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vertical Hot Air Circulation Dryer "ST/SY Series"

The operating temperature range is 50°C to 200°C! We introduce a dryer that can be selected in vertical or horizontal airflow types depending on the application.

The "ST/SY series" is a vertical dryer that can be used for various purposes, from drying equipment to heat treatment. The microcontroller-equipped digital controller allows you to store the temperature and time for daily use, as well as program operation for up to 8 steps and multiple cycles using touch keys. It achieves high-precision temperature control through PID control. The "ST series" features a ceiling fan that directs airflow from the bottom to the top inside the chamber, while the "SY series" is designed to save space with its vertical orientation. It is particularly suitable for loading samples to full capacity on multi-tiered shelves or for placing granular samples in shallow containers. 【Features】 ■ Space-saving and large capacity ■ Programmable operation with microcontroller control ■ High-precision temperature distribution - ST series: upward airflow - SY series: horizontal airflow *For more details, please refer to the PDF document or feel free to contact us.

Company：アルプ
Price：500,000 yen-1 million yen

Drying Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ADELCO Corporation Hot Air Circulation Dryer Series

We offer a variety of hot air dryers, including the compact and highly efficient Digi-Cure and the space-saving DDC-6!

Introducing ADELCO's series of hot air circulation dryers. We offer a lineup that includes the compact and highly efficient "Digi-Cure+", the space-saving box type "DDC-6", and the standard dryer "PRO-CURE smart". Our company provides comprehensive proposals and support for excellent printers and ancillary equipment both domestically and internationally. Please feel free to consult us if you have any concerns. 【Product Lineup】 ■Digi-Cure+ (Compact Belt Dryer) ■DDC-6 (Drawer Type Dryer) ■PRO-CURE smart (Powerful Belt Dryer) ■Dual smart (Two-Tier Belt Dryer) *For more details, please refer to the PDF document or feel free to contact us.

Company：上野山機工
Price：Other

Drying Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ADELCO Dryer "DDC-6A"

To dry printed materials most effectively, we use a hot air circulation method.

The "DDC-6A" is a compact and economical dryer suitable for digital printing with Kornit, Brother, and others. To best dry printed materials, it employs a hot air circulation method. Each drawer automatically opens after the drying time, thanks to an independent digital timer. Additionally, we offer the "DDC-3A" in our lineup. 【Features】 ■ Hot air circulation method ■ Independent digital timer ■ Automatically opens after drying time ■ Opens and closes with buttons on the control panel ■ Improved thermal efficiency with the bubble shut system *For more details, please refer to the PDF document or feel free to contact us.

Company：上野山機工
Price：Other

Drying Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Hot Air Dryer "Digi-Cure+"

A compact hot air dryer that combines the functions and performance of a large machine.

"Digi-Cure+" is a solution device designed for small to medium-sized production processes. It is compact in size but includes all the functions of a large dryer, allowing for use in a similar manner. It features an exhaust fan inside the chamber, creating a cleaner working environment. Additionally, the adoption of a sophisticated digital interface allows for easy control of belt speed and chamber temperature. 【Features】 ■ Space-saving design with a 0 cm wide conveyor belt ■ High drying capacity with a chamber length of 2.6 m ■ Control via a touch screen ■ Provides a clean working environment with a built-in exhaust fan ■ Equipped with twin fans, offering double the airflow of conventional models ■ Improved maintenance with tool-free detachable panels ■ Easy cleaning with an oil drip tray attached to the exhaust outlet *For more details, please refer to the PDF document or feel free to contact us.

Company：上野山機工
Price：Other

Drying Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Instant drying in a short distance! Non-ventilated heat treatment [drying] device "Heat Blow"

High-temperature treatment (up to 230°C) is possible with gas combustion! Eliminates the need for conventional insulation boards, making maintenance easy. We will bring your ideas and product development to life!

The "Heat Blow" is a heat treatment (drying) device with independent hot air blowing and recovery systems on both the upper and lower sides. Despite being very compact (short distance), it enables highly efficient drying and heat treatment. Due to the independent hot air blowing (ejection) and recovery method (newly devised/patented) on both sides, it is capable of drying and heat treating non-ventilated substrates, allowing for individual heating of each side, and enabling one-sided drying or thermal lamination of the heated surface. Furthermore, it maintains "bulk" and has a good texture. 【Features】 ■ Capable of high-temperature processing (up to 230°C) using gas combustion ■ The unit structure equipped with hot air generators and circulation blowers allows for easy expansion and modification of heating conditions for each unit ■ Eliminates the need for conventional casings (insulation panels) ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

Company：上野山機工
Price：Other

Drying Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ventilated heat fusion, heat treatment, and drying device "Heat Through"

Production and delivery achievements exceed 90 blocks (number of heat treatment rooms)! Due to the unit structure, expansion is possible.

"Heat Through" is a patented ventilated thermal fusion, heat treatment, and drying device. Thanks to its special blowing and suction mechanism, the hot air can uniformly penetrate the entire width of the material being processed. The side-open structure allows for visual inspection, which helps reduce product loss. Additionally, the efficient ventilation and circulation method reduces heat loss, energy consumption, and shortens heating time. We offer a horizontal type for the hot air generation and circulation section, as well as an easy-to-clean nozzle plate. 【Features】 ■ The entire upper conveyor can be adjusted vertically, allowing for free setting of the "thickness" of the material being processed. ■ The direction of ventilation for each block (selected during the design phase), as well as airflow and temperature operating conditions, can be freely set. ■ Due to its unit structure, expansion is possible. *For more details, please refer to the PDF document or feel free to contact us.

Company：上野山機工
Price：Other

Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dryer "D-100 POWERFUL SMALL"

Even small, it's high power! Unlike press drying, the smooth finish is well-received.

The "D-100 POWERFUL SMALL" is a dryer suitable for those who easily create original prints using a garment printer in offices such as apartments. It is smaller than a garment printer, so it doesn't take up much space even when placed next to the equipment. Additionally, unlike press drying, it is well-received for its smooth finish. Furthermore, it can be shipped assembled upon request, allowing you to use it immediately upon arrival. 【Features】 ■ High power despite its small size ■ Can be shipped assembled ■ Space-saving ■ Ideal for those creating original prints with a garment printer ■ Also suitable for those primarily producing T-shirts with screen printing *For more details, please refer to the PDF materials or feel free to contact us.

Company：上野山機工
Price：Other

Drying Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

『電気式汚泥脱水乾燥装置』

濃縮汚泥の吸い上げから乾燥汚泥排出まで無人自動運転が可能な乾燥装置

『電気式汚泥脱水乾燥装置』は、農業集落排水の排水汚泥、工場排水汚泥を乾燥させて減容化・有効利活用するシステムです。乾燥させることにより汚泥を大幅に減容化することができます。乾燥汚泥には、窒素、リンが豊富に含まれており、肥料として利用できます。また、肥料登録を行うことで農地還元ができます。(生活排水由来の汚泥の場合) 【特長】 ■24時間無人自動運転 ■トラック車載で巡回が可能 ■濃縮汚泥、脱水汚泥両方に対応 ■電気ヒーター加熱方式 ■24時間稼働により、諸規模設備でも大容量の処理が可能 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

Company：関西産業開発営業部
Price：Other

others
Drying Equipment
Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Drying device

We can design and manufacture devices for drying with a dryer. We are active in a wide range of fields, from semiconductor devices to pharmaceuticals!

Drying refers to the process of removing liquid moisture by applying heat or other means to achieve a dry state. The reasons for drying include preventing quality changes and various benefits such as long-term preservation. The three essential elements of drying are moisture content, heat source, and humidity. Sanpo Koki utilizes scientific technology and strives for environmental conservation. With 60 years of trust built since its establishment, we have solved many challenging problems for material manufacturers and processing companies. We also design and manufacture equipment using special metals such as stainless steel and titanium tailored to customer needs. Our company has many certified welders, allowing us to meet customer demands for products ranging from G8 chambers to small vacuum containers. We can accommodate requests for the production of up to 10 units per month. We also handle the design and manufacturing of drying equipment. Please feel free to consult with us. ■ Sales Items - Drying equipment / High-pressure gas / Pressure vessels / Fire Service Act / Aluminum / Titanium... * For more details, please refer to the PDF materials or feel free to contact us.

Company：三宝工機
Price：Other

Stainless steel container
Other laboratory equipment and containers
Welding Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contracted Product: Vacuum Dryer

What I paid particular attention to was the "flatness of the main body and the door"! I was able to proceed with production while leveraging the company's strengths.

We would like to introduce the "Vacuum Dryer" that we have manufactured. We produced one unit each of "Nickel Alloy (C-276)" and "SUS316L." Since it is crucial for "the interior to be vacuumed," we paid special attention to the "flatness of the main body and door." Regarding flatness, it is an important aspect that we emphasize in the manufacturing and inspection of our products (especially the cantilever rotary valves), so I feel that we were able to proceed with production while leveraging the strengths of our company. 【Features】 ■ Special bending processing of thick plates ■ Back wave welding on t1.5mm nickel alloy ■ Nickel alloy lining on SUS flanges *For more details, please refer to the PDF document or feel free to contact us.

Company：尾崎ウェルスチール本社、機械加工工場、歌島工場、粉体工学研究所
Price：Other

Drying Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fully Automatic Washing and Drying Machine 'HWD-7256G'

Suppresses uneven drying for quick drying! Maintains beauty even with long-term use and demonstrates durability.

The HWD-7256G is a fully automatic washing and drying machine that has improved usability with AQUA's unique structure and control. It adopts a "hot air path drum" that applies the "side wide blow method," efficiently directing hot air evenly onto the laundry. Additionally, with efficient drum reversal control, it suppresses unevenness in the laundry and achieves quick drying by reducing drying inconsistencies. Moreover, the high-speed spin reduces drying time, which also helps lower running costs. 【Features】 ■ Space-saving with dual functionality ■ Speedy energy efficiency ■ Easy operation ■ Thorough washing and quick drying while minimizing wrinkles and unevenness ■ Quiet operation *For more details, please refer to the PDF document or feel free to contact us.

Company：アクア大阪本社
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact tabletop freeze dryer 'FD-100e'

-45℃ small sample use! We also have a great set that includes 4 microtube holders and 4 mounting adapters.

The "FD-100e" is a freeze dryer that can freeze-dry small samples contained in pre-frozen ampoules, microtubes, and more on a tabletop. The main unit is equipped with an operating time accumulation timer for easy identification of when to change the vacuum pump oil. A 0.2μm filter installed at the atmospheric inlet prevents contamination during leaks. Additionally, we offer a value set that includes four microtube holders and four mounting adapters. 【Features】 ■ -45℃ for small samples ■ Equipped with an operating time accumulation timer ■ 0.2μm filter at the atmospheric inlet ■ Prevents contamination during leaks ■ Chamber that can accommodate microplates and deep wells *For more details, please refer to the PDF materials or feel free to contact us.

Company：アイラコーポレーション
Price：Other

Freeze Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-sample organic solvent concentration recovery system, shelf-type solvent drying recovery device, shelf-type dryer.

This is a shelf-type drying solvent recovery device suitable for solvent recovery and drying from slurries, bulk materials, and all solid-liquid mixtures containing organic solvents.

The shelf-type solvent drying and recovery device is a system that can evaporate organic solvents at a temperature lower than the boiling point of the solvent to be dried, under normal pressure, and recover the solvent. It can be suitably used for applications such as the following: ● Manufacturing processes for positive electrode materials like lithium-ion batteries ● Manufacturing processes for fuel cell positive electrode materials ● Drying processes for slurries containing organic solvents ● Solvent removal from polymer solutions containing organic solvents ● Drying processes for pharmaceutical agents for formulations ● Drying of resin materials wet with liquids Our company assembles these devices carefully in Japan, ensuring excellent reliability and durability, and repairs are also possible. You can use it with peace of mind for a long time.

Company：テクノシグマ
Price：1 million yen-5 million yen

Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dryer Product List and Ranking from 26 Manufacturers, Suppliers and Companies

Dryer Manufacturer, Suppliers and Company Rankings

Dryer Product ranking