Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
1621～1650 item / All 2059 items
We will cut and process EPDM rubber like Kintaro candy. We can also handle cutting and bonding using jigs for extruded products.
We manufacture weather-resistant ethylene-propylene rubber through extrusion molding and cut it to the specified length. When the rubber is thick, the cross-section tends to become distorted due to shearing. Please feel free to consult us about cutting in pipe or round shapes as well.
Due to the transparent resin, machining may cause cloudiness. The machined surface from the pipe material can also regain transparency through chemical treatment.
PC is the only transparent material among general-purpose engineering plastics and boasts exceptional impact resistance. It is said to have impact resistance 200 times that of glass and 50 times that of acrylic. Additionally, it excels in dimensional stability, weather resistance, and insulation resistance, with a usable temperature range of approximately -100°C to about 140°C.
It is a type of soft resin called elastomer and has a textured surface. Diamond patterns are often used for anti-slip purposes and can be seen as mats.
The Softon made by Kyowa Sangyo Co., Ltd. is made of thermoplastic elastomer (TPE) and is a sheet with moderate elasticity. It also has a non-slip effect and is commonly found on poolside floors. The available specifications are 2.4t (thickness) × 1,000mm (width) × 15m (length).
We can produce promotional items made from soft PVC. Vinyl comes in a variety of options, including transparent and fluorescent colors, and is suitable for die-cutting.
PVC is available in a flexible form and is easy to color and process. It is often used for card cases, vehicle inspection certificate holders, and school name tags. We also accept heat welding and welder processing.
Urethane is poured as a liquid material, solidified, and then shaped through cutting processes. Molding and cutting processes are also possible for materials softer than hardness 90.
Urethane rubber is a type of rubber that excels in wear resistance and mechanical strength. It is cast into a certain size and then machined down. Additionally, urethane comes in various forms, from hard to soft, and can also be colored.
PVC is a material suitable for adhesion and welding. In transparent resins, PVC and acrylic are commonly used for adhesive processing, while PC and PET are not suitable.
It is PVC, one of the four major transparent resins. It is inexpensive, easy to process, and used in various applications. We also accept not only shape processing but also adhesive and welding processing.
This is Moran #730, used for water-stopping packing. It is also possible to perform die-cutting with tape or adhesive on the back side. We can also provide suggestions for equivalent products.
Everlight Moran is a semi-independent bubble foam from Arkema Co., Ltd. It is made from EPDM, which has excellent weather resistance and chemical resistance. Due to its flexibility, it easily conforms to uneven surfaces and provides stable water sealing and air sealing by compressing. It has a foaming ratio of approximately 10 to 30 times. It is often used in parts that require waterproofing, such as seal materials for automobile headlights.
This is a flange for PTFE machining. PTFE has poor adhesive properties, so it is assembled using helicoils and screws.
Teflon has excellent chemical resistance, electrical insulation, and heat resistance, with a water absorption rate of 0%. It is the representative of fluororesins, having the least friction among all substances and being difficult for anything to stick to. The recommended temperature range for use is -100°C to 260°C, and the maximum operating pressure is 1 MPa. We also accept water jet processing in various sizes and quantities. Due to its difficulty in adhesion, it is joined using helicoils and countersunk screws.
The process of cutting into a waveform is called profile processing. Many people may have seen profile processed products made from car wash sponges.
By flowing sponge into the uneven rollers (molds) in the upper and lower sections while cutting, a wave shape is created. This is familiar as sponge for cleaning purposes and as cushioning material for pillows and beds. Please feel free to consult us about the softness of the material, functionality, and more.
Pre-production prototypes can be made with silicone 70° material. Since pre-production prototypes are in small quantities, machining without molds is recommended.
It is silicone rubber known for its high heat resistance and hygiene. With a relatively hard 70° among silicones, it has a good hardness that is not too soft for machining. Please feel free to inquire about other hardness and colors.
We handle Sanperca L-2500 manufactured by Sanwa Chemical Corporation. L-2500 is soft, but some water jet marks may remain.
L-2500 is a polyethylene foam with an apparent density of 30kg/m³, widely used for its smooth texture and softness. It comes in color variations of white, black, gray, red, yellow, green, and blue, resembling a pool float. The image is a demonstration piece, showcasing the three-dimensional processing capabilities of a 5-axis controlled water jet cutter.
FR-100 is a flame-retardant rubber that can be processed by die-cutting. We handle flame-retardant rubber from various manufacturers, so you can leave the die-cutting process to us.
FR-100 is a flame-retardant rubber manufactured by Iruma River Rubber Co., Ltd. It is an EPDM-based rubber. In various fields, there is a strong demand for flame-retardant measures, and it complies with the UL-94 V-0 standard. We also offer rubber sheets with other functional properties.
Vinyl sheets can be cut out like rubber sheets. Since rubber does not come in transparent, cut-out processing of soft PVC is useful for displays and other applications.
Soft PVC is a familiar transparent vinyl used for desk mats and similar items. Like rubber, it can be adhered with double-sided tape or processed through punching. It is also used in factories and warehouses for partitions and cold storage curtains.
Sanpelca can perform water jet processing. Depending on the thickness and density, there is a possibility of water jet streaks appearing.
The L-1400 was cut using a water jet cutter, and the image was created for demonstration purposes. It enables three-dimensional processing, which is a feature of 5-axis control. Since it is a widely used material, there is a rich variety of color options available.
The 6 nylon sheets are processed by punching up to about 1 ton. Resin packing and washers are also mass-produced through punching.
6N is a representative polyamide that excels in chemical resistance and impact resistance, is tough yet flexible, and maintains strength over a wide temperature range. When extracting hard materials, we also focus on improving the durability of the molds used for extraction. Extraction processing is possible depending on the thickness, so please contact us for inquiries.
We process olefin foams such as PE and EVA. In addition to processing, we also accept orders for the production of molds.
A-8 is a type of polyolefin foam that is resistant to degradation from water and light, making it a durable material suitable for long-term use. It is processed using a die-cutting method with blades set into a plywood board, commonly referred to as Thomson or bick dies. We also accept inquiries for mold production for animals and other purposes.
Silicone rubber is available in various thicknesses and can be processed quickly. Please leave the gaskets and seals that require hygiene and heat resistance to us.
Silicone rubber is particularly excellent in cold and heat resistance, and it is characterized by very little change in properties within the range of -60° to 250°. It complies with the Food Sanitation Act, making it suitable for use in food machinery and medical devices. We have it in stock as a material for punching. Please feel free to consult us.
PVC is suitable for machining, and subsequent bonding or welding processes are also good. We handle a lot of machining for both gray and transparent materials.
PVC, commonly seen in everyday gray vinyl, is an inexpensive material that is easy to process through bending, welding, and gluing, and is used in a wide range of fields. It has excellent chemical resistance and weather resistance, and its flame retardant properties help prevent the spread of fire. There is also transparent vinyl available. We also accept connections with commercially available PVC standard products, such as those used for plumbing.
We offer processing of plates utilizing the low wear coefficient of Duracon. Please make use of our precise machining for plates and rolls.
POM takes advantage of its excellent durability and is used as an alternative to metal parts. It can also be used for gears, bearings, pulleys, and rollers that require fatigue resistance and wear resistance. It has strong properties against solvents and low water absorption, which provides high dimensional stability during processing, making it suitable for machining and welding.
Sanpelka is processed into a wide range of products such as cushioning materials and insulation materials. L-2000 has a pleasant texture and is also processed for use in case interiors and fixtures.
L-2000 is a polyethylene foam that is 20 times lighter, widely used as cushioning and insulation material due to its lightness, and does not allow liquids to pass through because of its closed-cell structure. It can be processed in one go up to about 50mm thick using punching or water jet cutting. Colors available are white, black, gray, and blue, while red, green, and yellow are made to order. The apparent density is 45kg/m³, and the effective dimensions are 100mm × 1,000mm × 1,000mm, with thickness, width, and length customizable to the required size.
EPDM is a major weather-resistant rubber that is widely used in die-cutting processes. Die-cutting is ideal for cost reduction in mass production of spacers.
EPDM is characterized by excellent weather resistance, ozone resistance, and aging resistance, as well as good electrical properties and high resistance to polar liquids. It is a recommended rubber for outdoor applications, using sheets with a hardness of approximately 65°. We have materials in stock with varying thicknesses, so please feel free to consult us.
It is also called nitrile rubber, and the sheets are processed by die-cutting. Please use die-cutting for mass production of oil-resistant rubber gaskets and similar products.
Nitrile rubber is a representative of oil-resistant rubber and also has good abrasion resistance and aging resistance. We use No. 7783 from Teraoka Seisakusho Co., Ltd. for the double-sided tape. It has excellent heat resistance and conformability to curved surfaces, and is also suitable for punching processing. We have stock available in various thicknesses, so please feel free to consult with us.
Soft Si-300 with a hardness of 25 can be cut using a die-cutting process. Silicone sponge is used as a heat-resistant packing.
Si-300 is a silicone sponge sheet manufactured by San Polymer Co., Ltd., with a hardness of 30° on the surface. It can be sliced to thicknesses ranging from 20mm to 1mm. It has excellent weather resistance and heat resistance (approximately -50°C to 200°C). It also complies with food hygiene standards. Standard products are available in 10° and 20°, with colors including red ochre and black, and white is available for 20° and 30°. Due to its fine independent bubbles, it exhibits excellent sealing properties.
We are adjusting the thickness through milling from the standard plate thickness of MC901. Please leave various processing such as milling from MC nylon plates to us.
MC901 has excellent mechanical strength, heat resistance, chemical resistance, and wear resistance. It is a material widely used in general. It can also be produced using MC nylon from other manufacturers, such as Mitsuboshi Seisakusho. There are processing machines that are advantageous for large quantities. Please feel free to consult with us.
We accept custom orders for shapes that can be made with sponge. Pin badges come in various shapes such as round and square, so please feel free to consult us about custom shapes.
A-8 is a general-purpose polyolefin foam that is readily available and inexpensive. It comes in six standard colors: white, black, gray, blue, green, yellow, and red, with a special color of deep black available as well. We also accept orders for small items, so please feel free to consult with us.
We made cushion rubber from the EPT sheets in stock. Rubber cushions and spacers can be mass-produced at low cost through die-cutting.
Ethylene propylene rubber is excellent in weather resistance, ozone resistance, and aging resistance, making it suitable for long-term use even under outdoor conditions. Since it is a commonly used rubber, we have materials in stock depending on the thickness. We can also discuss the number of lots, so please feel free to contact us.
We have various thicknesses of Neo Sp C-4305 in stock. Among many options, C-4305 is a standard product that is widely used for cutting processing.
It is one of the common rubber sponges made from CR rubber that has been foamed. You can often find it as gap-filling cushions or tapes at home improvement stores. It also meets flame retardant standards.
We will process the non-asbestos joint sheet T1995 made by Nichias. The joint sheet can be processed using a Thomson-type die cutting.
This is a non-asbestos joint sheet made by adding inorganic fillers to inorganic fibers and aramid fibers, with oil-resistant synthetic rubber blended as a binder. The T1995 produced by Nichias Corporation is a material that is easy to process. The recommended temperature range for use is -100°C to 150°C. We also accept water jet processing in various sizes and quantities.
Polycarbonate, which has high impact resistance, is often subjected to machining. Items with many machined surfaces, such as caps, will remain cloudy unless polished.
Polycarbonate is the only transparent general-purpose engineering plastic. It also excels in weather resistance. By polishing the cut surface, transparency can be restored.
Cast nylon sheets can also be laminated and bonded using double-sided tape. They will be used as trays for adhesive processing with CN-CDH in electronic components.
This is conductive cast nylon manufactured by Mitsuboshi Belt Co., Ltd. The first and second layers are made in different shapes and are bonded together with double-sided tape. Feel free to leave the selection of materials and tape to us.
