Recovery device Product List and Ranking from 179 Manufacturers, Suppliers and Companies

Large Solvent Recovery System for the Chemical Industry (Continuous Type)

Continuous solvent recovery in the refining process of the chemical industry.

In the refining process of the chemical industry, the efficient recovery and reuse of used solvents are emphasized for both cost reduction and environmental impact reduction. Particularly in sites where large amounts of waste solvents are generated, stable processing capacity and reliable recovery are required. Our "Large Solvent Recovery Unit CA-800 Series" is suitable for processing more than one ton of waste solvents per month and can be installed and recovered in both non-explosion-proof and explosion-proof areas for solvents with a boiling point of approximately 250°C or lower. This supports the sustainable use of solvents in the refining processes of the chemical industry. 【Usage Scenarios】 - Chemical plants with high waste solvent emissions - Reuse of solvents in the refining process - Compliance with environmental regulations - Sites aiming for cost reduction 【Benefits of Implementation】 - Reduction in solvent purchase and disposal costs - Decrease in CO₂ emissions - Maintenance of production efficiency through stable solvent supply - Reduction of environmental impact

Company：コーベックス
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Large Solvent Recovery System for Electronic Components (Continuous Type)

Continuous solvent recovery for an unstoppable site.

In the electronic components industry, organic solvents are used for flux removal in the manufacturing process, and managing their discharge and reducing costs have become challenges. Particularly in continuous production activities, the stable recovery and reuse of solvents are essential for balancing environmental impact reduction and economic efficiency. Our "Large Solvent Recovery Unit CA-800 Series" is suitable for processing over one ton of waste solvent per month and can be installed in both non-explosive and explosive areas, meeting the needs of diverse manufacturing sites. 【Usage Scenarios】 - Recovery of waste solvent after flux removal in electronic component manufacturing lines - Continuous solvent recovery without stopping the production line - Labor-saving through automatic liquid supply and discharge from drums and storage tanks 【Benefits of Implementation】 - Reduction of processing costs due to decreased waste solvent discharge - Cost savings on purchases through the reuse of recovered solvents - Strengthened compliance with environmental regulations

Company：コーベックス
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Large Solvent Recovery System for Petrochemicals (Continuous Type)

Continuous solvent recovery that never stops for the separation and purification of petrochemicals.

In the petrochemical industry, the separation and purification processes require efficient recovery and reuse of solvents to obtain high-purity products. When the amount of waste solvents is large, the treatment costs and environmental impact cannot be ignored. Additionally, some processes may require work in explosion-proof areas. Our "Large Solvent Recovery Unit CA-800 Series" is suitable for processing over one ton of waste solvents per month and can be installed and recovered in both non-explosion-proof and explosion-proof areas for solvents with a boiling point of approximately 250°C or lower. This contributes to reducing solvent purchase and disposal costs, lowering CO₂ emissions, and supporting the establishment of a sustainable production system. 【Usage Scenarios】 - Solvent recovery in separation and purification processes at petrochemical plants - Continuous solvent recovery in sites with high waste solvent discharge - Solvent recovery in non-explosion-proof and explosion-proof areas - Automatic liquid supply and discharge from drums or storage tanks when needed 【Benefits of Implementation】 - Reduction of solvent purchase and disposal costs - Decrease in CO₂ emissions - Maintenance of production lines through stable solvent supply - Improvement of the working environment

Company：コーベックス
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Large Solvent Recovery System (Continuous Type) for Aerospace Applications

Continuous solvent recovery for aerospace component cleaning.

In the aerospace industry, maintaining precise cleaning quality and managing the solvents used are of utmost importance in parts cleaning. Particularly for parts that require a high level of cleanliness, a decline in solvent quality can directly lead to the occurrence of defective products. Additionally, from the perspective of complying with environmental regulations and reducing costs, efficient reuse of solvents is essential. Our large solvent recovery system (continuous type) addresses these challenges and contributes to stable solvent management and cost reduction. 【Usage Scenarios】 - Precision cleaning processes for aerospace components - Sites generating more than one ton of waste solvent per month - Installation needs in both non-explosive and explosive areas 【Benefits of Implementation】 - Maintains solvent quality and contributes to stabilizing cleaning quality - Reduces environmental impact by decreasing waste solvent discharge - Improves cost efficiency by reducing solvent purchase and disposal costs

Company：コーベックス
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Construction Case] CO2 Reduction and VOC Recovery Equipment

Balancing CO2 reduction and VOC recovery

We will introduce a case of CO2 reduction through VOC recovery. ■Industry: Chemical Plant ■Challenge: The factory was using combustion equipment for exhaust gas treatment. While reducing VOCs, CO2 was being emitted, so we were considering equipment that would have a lower environmental impact and could reduce CO2 emissions as well as the utility costs for the factory. ■Effects: There were three major effects. First, there was a reduction in environmental impact, as VOC concentrations were reduced to below 100 ppm, and CO2 emissions from the previous equipment were eliminated. Second, the elimination of fuel needed for combustion and the power required for blowers used for dilution significantly reduced running costs. Third, the equipment became more compact, improving the company's operations. ■Response: The feature of this system is that it operates in the opposite range of high concentration from low to medium airflow, which is the specialty of combustion equipment. Since we were diluting VOCs to match the combustion equipment, we changed the method to introduce the exhaust gas directly into the silica gel PSA without dilution. *For more details, please feel free to contact us.

Company：システムエンジサービス
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【For the Energy Industry】Pipe Clogging Measures / MAGPICKER

Solve piping blockages in chemical material manufacturing processes with MAGPICKER! Reduce cleaning and replacement costs.

In the energy industry, the stable operation of plant equipment is crucial, and pipe blockages pose a significant challenge that can lead to decreased production efficiency and unexpected shutdowns. Particularly in processes that handle chemical materials, debris and scraps tend to accumulate in the pipes, necessitating regular cleaning and equipment replacement, which leads to increased costs. By installing MAGPICKER upstream in the piping, these challenges can be addressed, contributing to the stable operation of the equipment. 【Usage Scenarios】 - Chemical material manufacturing processes - Reduction of production stoppage risks due to pipe blockages - Reduction of pipe cleaning and replacement costs 【Benefits of Implementation】 - Reduction in pipe cleaning and repair costs - Stable operation of equipment - Improvement in production efficiency

Company：サノテック
Price：Other

Ceramics
Filtration Equipment
Solid-liquid separation filter
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Solution Case] VOC Emission Control Measures (Collection, Removal, Reduction)

Developing and manufacturing general-purpose solvent recovery devices for university research laboratories, and custom products tailored to production equipment for businesses!

We will propose suitable methods and equipment for the recovery, reduction, and removal of VOCs, taking into account the customer's situation. The "cold trap method" allows for clean recovery when VOCs are at high concentrations. The "scrubber method" effectively removes low concentrations of VOCs with good cost performance. Additionally, we also offer the "activated carbon adsorption method," which can remove low concentrations of VOCs and allows for the recycling of activated carbon. 【Specific Methods for VOC Reduction, Recovery, and Removal】 ■ Cold Trap Method - Allows for clean recovery when VOCs are at high concentrations. ■ Scrubber Method - Effectively removes low concentrations of VOCs with good cost performance. ■ Activated Carbon Adsorption Method - Allows for recycling of activated carbon and removes low concentrations of VOCs. *For more details, please refer to the PDF materials or feel free to contact us.

Company：テクノシグマ
Price：Other

Gas recovery/treatment equipment
Other physicochemical equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

IK Oil Skimmer "OS Type" for the Automotive Industry

Collect floating oil at the source and contribute to quality improvement!

Floating oil mixed with cutting oil and cleaning liquids in the automotive industry can lead to poor wastewater treatment. The IK Oil Skimmer "OS Type" efficiently collects this floating oil at the source, contributing to quality improvement. 【Usage Scenarios】 - Cutting oil tanks - Cleaning processes - Oil traps 【Benefits of Implementation】 - Improved quality of parts - Reduced painting defects - Stabilization of processes

Company：日本技建
Price：Other

Other cleaning machines
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PET bottle collection machine equipped with a deposit feature

This is a PET bottle collection machine that can process plastic bottles up to 2 liters. They are reduced in volume by compression (1/5) and crushing (1/8).

The PET bottle collection machine "KGW-01A/01B" can process plastic bottles (PET bottles) up to 2 liters, reducing their volume through compression (1/5) and crushing (1/8). We offer two models, "KGW-01A" and "KGW-01B," which differ in size. It can deliver advertisements on a large LCD screen and allows remote operation via the web, enabling the replacement of video screens and advertisement footage. Additionally, it supports deposit functions using coins, coupons, point cards, and QR codes. 【Features】 ■ Capable of processing plastic bottles (PET bottles) up to 2 liters ■ Reduces volume through compression (1/5) and crushing (1/8) ■ Equipped with deposit functions (coins, coupons, point cards, QR codes) *For more details, please refer to the PDF document or feel free to contact us.

Company：エコフレンド
Price：Other

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Floating oil recovery device "Pure Mini"

No installation work required, with thorough initial setup achieving 95% oil recovery! The water surface is always clean, no more worries about floating oil!

"Pure Mini" can quickly remove floating oil by concentrating thin oil into high-purity oil. 【Features】 ■ Patent obtained for concentrating thin oil into high-concentration oil (see case studies) ■ 95% recovery of high-purity oil ■ No installation work required; compact, lightweight, and high-performance ■ Quick oil recovery with the adoption of a float system *For more details, please refer to the related links or feel free to contact us.

Company：ジャパンセパレーター
Price：100,000 yen-500,000 yen

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oil Recovery Device for the Chemical Industry "Pure Mini"

Contributing to process oil separation! Achieved 95% oil recovery without the need for installation work.

In the chemical industry processes, there is a demand for the efficiency of oil-water separation. In particular, the separation of process oil plays an important role in maintaining product quality and reducing the burden of wastewater treatment. Insufficient oil separation can lead to decreased production efficiency and increased environmental impact. Our floating oil recovery device, "Pure Mini," addresses these challenges by concentrating thin oil and recovering it as high-purity oil. 【Usage Scenarios】 - Recovery of floating oil from process liquids - Oil removal before wastewater treatment - Oil-water separation in tanks 【Benefits of Implementation】 - Recovery rate of high-purity oil over 95% - Purification of the water surface - Reduction of work burden

Company：ジャパンセパレーター
Price：100,000 yen-500,000 yen

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Floating Oil Recovery Device for Plant Maintenance: 'Pure Mini'

No installation work required, 95% oil recovery achieved! Keep the water surface clean and eliminate floating oil problems.

In plant maintenance, managing oil content on the water surface is crucial for stable equipment operation and environmental conservation. In particular, oil discharged from equipment can lead to pipe blockages, reduced equipment performance, and environmental pollution. Therefore, rapid and efficient oil recovery is required to address these challenges. The "Pure Mini" is a floating oil recovery device that concentrates thin oil and recovers it as high-purity oil, contributing to solving these issues. 【Usage Scenarios】 - Oil recovery from water tanks and reservoirs within the plant - Maintenance of oil-water separation tanks on the production line - Removal of floating oil in factory wastewater treatment processes 【Benefits of Implementation】 - Effectively removes oil from the water surface, reducing environmental impact - Maintains equipment cleanliness and reduces the risk of failure - Recovers high-purity oil, exploring possibilities for reuse

Company：ジャパンセパレーター
Price：100,000 yen-500,000 yen

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Agricultural Floating Oil Recovery Device "Pure Mini"

Recover 95% of floating oil from agricultural machinery oil. Keep the water surface clean and solve problems.

In the maintenance and storage of agricultural machinery, the issue of floating oil can arise. In particular, floating oil that occurs during the downtime of agricultural equipment raises concerns about equipment deterioration and its impact on the surrounding environment. Additionally, it leads to the need for regular cleaning and oil-water separation. Our floating oil recovery device, "Pure Mini," offers a simple and effective solution to these challenges. 【Usage Scenarios】 - Oil pans in agricultural machinery storage facilities - Oil-water separation tanks for tractors and combines - Agricultural waterways and reservoirs 【Benefits of Implementation】 - Rapid recovery of floating oil - Purification of the water surface - Increased efficiency of maintenance work

Company：ジャパンセパレーター
Price：100,000 yen-500,000 yen

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Floating Oil Recovery Device for Construction Machinery "Pure Mini"

Efficiently recover hydraulic oil from construction machinery. Keep the water surface clean.

In the construction machinery field, managing floating oil such as hydraulic fluid is crucial. Particularly, efficient and rapid oil recovery is necessary to prevent hydraulic system troubles and reduce environmental impact. Leaving floating oil unattended can lead to decreased equipment performance and potential environmental pollution. Our product "Pure Mini" addresses these challenges by achieving high-efficiency oil recovery without the hassle of installation. 【Usage Scenarios】 - Hydraulic tanks of construction machinery - Management of hydraulic fluids - Rapid response in case of oil leaks 【Benefits of Implementation】 - Maintenance of hydraulic fluid purity - Contributing to the longevity of equipment - Reduction of environmental impact

Company：ジャパンセパレーター
Price：100,000 yen-500,000 yen

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Standard equipped with suction pressure indicator" Hume Zero 'FZ-2010'

High static pressure, long lifespan, and localized suction! Supports the improvement of work environments with high cost performance.

The "Hume Zero" is a fume extraction device equipped with a standard suction pressure indicator. It allows for continuous suction even during filter cleaning, making it suitable for robotic and automated welding. It automatically alternates cleaning two filters by blowing compressed air, and fume and spatter can be easily removed and processed using a pull-out fume tray. 【Features】 ■ Centrifugal separation mechanism adopted ■ High-performance cartridge-type twin filters ■ Air shock filter cleaning function ■ Continuous operation allowed ■ Air pressure monitoring function for filter cleaning *For more details, please refer to the PDF document or feel free to contact us.

Company：マツモト機械
Price：Other

Welding Machine
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Due to optional support, one unit can suction in two locations.

High static pressure, long lifespan, and local suction! Supports the improvement of the working environment with high cost performance.

The "Fume Zero" is a fume extraction device equipped with a standard suction pressure display. It allows for continuous suction even during filter cleaning, making it suitable for robotic and automated welding. It automatically alternates cleaning two filters by blowing compressed air, and the pull-out fume tray allows for easy removal and handling of fumes and spatter. 【Features】 ■ Centrifugal separation mechanism adopted ■ High-performance cartridge-type twin filters ■ Air shock filter cleaning function ■ Continuous operation capability ■ Air pressure monitoring function for filter cleaning *For more details, please refer to the PDF document or feel free to contact us.

Company：マツモト機械
Price：Other

Welding Machine
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Adoption of high-performance filters for ultrafine particles.

We support the improvement of work environments with compact, lightweight, and ultimate cost performance.

The "Hume Zero Mini" is a fume collection device capable of local suction. It is one-third the size of the conventional model "Hume Zero" and has a lightweight body mass of approximately 20 kilograms.

Company：マツモト機械
Price：Other

Welding Machine
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The filter is a laminated treatment of a porous PTFE membrane with static electricity prevention.

We support the improvement of work environments with compact, lightweight, and ultimate cost performance.

The "Hume Zero Mini" is a fume collection device that allows for local suction. It is one-third the size of the conventional model "Hume Zero" and has a lightweight body weighing approximately 20 kilograms.

Company：マツモト機械
Price：Other

Welding Machine
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Easy to disassemble and simple to maintain!

We support the improvement of work environments with compact, lightweight, and ultimate cost performance.

The "Hume Zero Mini" is a fume collection device that allows for local suction. It is one-third the size of the conventional model "Hume Zero" and has a lightweight body mass of approximately 20 kilograms.

Company：マツモト機械
Price：Other

Welding Machine
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance blower motor! Maximum suction pressure of -24.0 kPa and high static pressure!

We support the improvement of work environments with a compact, lightweight design and ultimate cost performance.

The "Hume Zero Mini" is a fume collection device that allows for local suction. It is one-third the size of the conventional model "Hume Zero" and has a lightweight body mass of approximately 20 kilograms.

Company：マツモト機械
Price：Other

Welding Machine
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Even if the suction duct is long, there is little decrease in suction power!

We support the improvement of work environments with compact, lightweight, and ultimate cost performance.

The "Hume Zero Mini" is a fume collection device capable of local suction. It is one-third the size of the conventional model "Hume Zero" and has a lightweight body mass of approximately 20 kilograms.

Company：マツモト機械
Price：Other

Welding Machine
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Distillation Equipment] Ammonia Treatment Equipment

Solving issues such as the recovery of ammonia-containing wastewater discharged during the semiconductor manufacturing process!

We would like to introduce a case study of our ammonia treatment equipment. The challenges were the recovery of ammonia solution from waste ammonia aqueous solution and the recovery of ammonia from wastewater containing ammonia discharged during the semiconductor manufacturing process. By delivering our ammonia recovery system and recovering ammonia solution, we were able to meet the processing capacity and product composition required by the customer. 【Case Overview】 ■Challenges - Recovery of ammonia solution from waste ammonia aqueous solution - Recovery of ammonia from wastewater containing ammonia discharged during the semiconductor manufacturing process (or deodorization treatment) ■Solution - Delivered our ammonia recovery system and recovered ammonia solution *For more details, please download the PDF or feel free to contact us.

Company：日本化学機械製造本社
Price：Other

Distillation Apparatus
Other distillation equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Helium

It is a device that collects the helium gas used in the process and refills it into a high-pressure container. It is very effective for the environment and resources.

The basic unit is a gas booster pump that pressurizes low-pressure helium gas to high pressure, using an air-driven gas booster manufactured by Haskel. The gas booster can be selected according to the required refill pressure and the capacity of the container, ensuring the most efficient combination of equipment.

Company：ジャパンコントロールス「Japan Controls Co. Ltd.」東京本社
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Oil recovery device FOR-3

Floating oil recovery device

Company：日本化材
Price：Other

others
Recovery device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting fluid (coolant) device, floating oil recovery device, AP-6P type

Ultra-compact installation on the tank with a float suction type! The top of the tank is pure white! Prevents bad odors from cutting fluids and cleaning liquids, extending their lifespan!

The "U-Clean AP-6P type" is a floating oil recovery device that powerfully sucks up floating oil, sludge, and foam with its strong vacuum capability. The high pressure in the separation tank significantly reduces the water content of waste oil (coolant liquid) to levels that were impossible with conventional products. It features an extremely low price with a simple structure that has no pump failures at all. 【Features】 ■ Uses an air pump with no mechanical movement, preventing sludge clogging ■ Efficiently and powerfully vacuums floating oil, sludge, and foam ■ Easily sucks up foam with strong vacuum power and converts it into droplets in the separation tank ■ Easily discharges sludge with a sludge scraping shovel → no need for tank cleaning ■ Completely free of special maintenance parts and consumables *For more details, please refer to the PDF document or feel free to contact us.

Company：U.ENG 習志野台
Price：100,000 yen-500,000 yen

others
lathe
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cost reduction of cleaning liquid treatment equipment - Floating oil recovery device AP-6P type

Super compact installation on the tank with a float suction type! The top of the tank is pure white! Prevents bad odors from cutting fluids and cleaning liquids, extending their lifespan!

The "U-Clean AP-6P type" is a floating oil recovery device that powerfully sucks up floating oil, sludge, and foam with its strong vacuum force. The high pressure in the separation tank significantly reduces the water content of waste oil (coolant liquid) to levels that were impossible with conventional products. It features an extremely low price with a simple structure that has no pump failures at all. 【Features】 ■ Uses an air pump with no mechanical movement, preventing sludge clogging ■ Efficiently and powerfully vacuums floating oil, sludge, and foam ■ Easily sucks up foam with strong vacuum power and converts it into droplets in the separation tank ■ Easily discharges sludge with a sludge scraping shovel → no need for tank cleaning ■ No special maintenance parts or consumables required *For more details, please refer to the PDF document or feel free to contact us.

Company：U.ENG 習志野台
Price：100,000 yen-500,000 yen

others
lathe
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cost reduction of cleaning liquid purification device - Floating oil recovery device AP-6P type

Super compact installation on the tank with a float suction type! The top of the tank is pure white! Prevents bad odors from cutting fluids and cleaning liquids, extending their lifespan!

The "U-Clean AP-6P type" is a floating oil recovery device that powerfully sucks up floating oil, sludge, and foam with its strong vacuum capability. The high pressure in the separation tank significantly reduces the water content of waste oil (coolant liquid) to levels that were impossible with conventional products. It features an extremely low price with a simple structure that has no pump failures at all. 【Features】 - Uses an air pump with no mechanical movement, preventing sludge clogging - Efficiently and powerfully vacuums floating oil, sludge, and foam - Easily sucks up foam with strong vacuum power and converts it into droplets in the separation tank - Easily discharges sludge with a sludge scraping shovel → no need for tank cleaning - No special maintenance parts or consumables required *For more details, please refer to the PDF document or feel free to contact us.

Company：U.ENG 習志野台
Price：100,000 yen-500,000 yen

others
lathe
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Floating (Suspended) Sludge Recovery Device U-Clean AP-1G Type

The "U-Clean AP-1G type" is a floating oil recovery device that uses an air pump to powerfully suction floating contaminants from the cutting fluid tank.

**Features** 1. The air pump is a revolutionary oil recovery device that does not require maintenance, as it has no mechanical parts like diaphragm pumps and can pass sludge up to φ8mm, unlike conventional products that require maintenance for suction filters, resulting in a different dimension of wear, failure, and maintenance-free operation. 2. Unlike conventional products that rely on liquid drop differences and suction types, this device uses air vacuum power to forcibly suck in floating foreign substances while destroying them. 3. The oil-water separation tank is a sealed type with a gasket, which shuts out the smell of oil containing rotten bacteria. 4. Instead of regular cleaning maintenance of the oil-water separation tank, sludge can simply be scraped out into the sludge receiving box using the included sludge scraping shovel, depending on the accumulation of sludge inside the tank. 5. The structure prevents foam (mostly cutting fluid) from entering the waste oil barrel by de-foaming the foam in the sealed oil-water separation tank under pressure.

Company：U.ENG 習志野台
Price：100,000 yen-500,000 yen

lathe
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Large Solvent Recovery System (Continuous Type) for the Paint and Ink Industry

Continuous solvent recovery for an unstoppable site.

In the paint and ink industry, the treatment of waste solvents generated during the manufacturing process can be a challenge. Especially in continuous production activities, it is necessary to reduce the amount of waste solvent discharged and to promote the effective use of resources. The "Large Solvent Recovery Unit CA-800 Series," suitable for handling waste solvent discharges of over one ton per month, meets the needs of such sites. If the boiling point of the solvent to be recovered is approximately 250°C or lower, installation and solvent recovery can be performed regardless of whether it is in a non-explosion-proof area or an explosion-proof area. This product is widely utilized by manufacturing companies that use organic solvents and supports solvent recycling in the paint and ink industry. 【Usage Scenarios】 - Recovery of waste solvents in paint manufacturing lines - Solvent recycling in ink manufacturing processes - Sites with waste solvent discharge of over one ton per month - Use in non-explosion-proof and explosion-proof areas 【Benefits of Implementation】 - Reduction of waste solvent discharge - Decrease in solvent purchase costs - Reduction of environmental impact - Maintenance of a stable production system

Company：コーベックス
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Recovery device Product List and Ranking from 179 Manufacturers, Suppliers and Companies | IPROS GMS

Recovery device Manufacturer, Suppliers and Company Rankings

Recovery device Product ranking