Recovery device Product List and Ranking from 175 Manufacturers, Suppliers and Companies

Demonstration gas recovery device

No air source needed! A movable demonstration gas recovery device that can be easily transported.

The "demonstration gas recovery device" is a system designed to ultimately confirm whether it can be operated and designed on a commercial scale. Based on the basic design data obtained from the experimental gas recovery device, it verifies whether the target gas can be recovered under conditions closer to those of an actual gas recovery device. Additionally, this device is movable, allowing for easy relocation. 【Features】 ■ Confirms whether the target gas can be recovered ■ Movable for easy transportation ■ Uses electrically operated valves, eliminating the need for an air source *For more details, please refer to the PDF document or feel free to contact us.

Company：システムエンジサービス
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SES-VRU

A simple structure with a space-saving skid mount design! On-site construction will also be completed in a short period.

"SES-VRU" is a product that uses a special adsorbent for the liquid recovery of VOC vapors generated under various conditions. By changing the adsorbent, the method of filling the adsorbent, and the method of recovering desorbed gas, it is possible to recover a wide variety of VOCs in liquid form. By implementing this system, there are benefits such as compliance with VOC emission regulations and the reuse of recovered VOCs. 【Features】 ■ Simple process ■ High safety ■ High VOC recovery rate ■ Optimization of the adsorption tower ■ Fully automated operation *For more details, please download the PDF or feel free to contact us.

Company：システムエンジサービス
Price：Other

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Volatile organic solvent gas recovery device

Possesses a high removal capability that can generally keep the emission concentration of volatile organic solvent gases below 50 volppm!

The "Volatile Organic Solvent Gas Recovery Device" is a system developed to recover volatile organic solvent gases and prevent air pollution. It uses non-combustible adsorbents and does not utilize heat sources such as steam, resulting in an extremely low risk of fire, while maintaining high safety even when flammable gases are introduced. Additionally, the simple process and skid-mounted structure minimize the required land area and installation costs. 【Features】 ■ High safety ■ High removal rate ■ Sophisticated equipment configuration ■ Dry operation ■ Low-pressure operation *For more details, please download the PDF or feel free to contact us.

Company：システムエンジサービス
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[VOC Recovery Device Introduction Case] Reuse through Liquid Recovery

Introducing examples that have also led to compliance with laws and improvement of the internal work environment!

We would like to introduce a case where a VOC recovery device was implemented, and reuse was achieved through liquefied recovery. The customer was considering a method to recover VOCs generated from the production process in as high a purity as possible, as the cost and usage of solvents were increasing in a process where VOCs were consistently generated. After implementation, it was possible to keep the design outlet concentration below 100 ppm, and the recovered solvent was automatically transferred when the liquid accumulated, resulting in a reduced operational burden and the creation of a system for reuse. [Case Summary] ■ Challenges and Background: The customer was exploring methods to recover VOCs generated from the production process in as high a purity as possible for reuse. ■ Solution: Reduced the processing gas flow rate to make the device more compact. *For more details, please download the PDF or feel free to contact us.

Company：システムエンジサービス
Price：Other

Gas recovery/treatment equipment
Recovery device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SF6 Gas Recovery Device Comprehensive Catalog

Introducing advanced equipment backed by reliable technology, developed uniquely by our company based on our extensive track record!

This catalog introduces a variety of "SF6 gas recovery devices" handled by Taiyo Nippon Sanso Corporation, East Kanto. Our company has obtained numerous patents for recovery devices and related equipment through unique development based on our extensive track record. We offer devices that are highly reliable due to their safety in accordance with the High-Pressure Gas Safety Act and their high quality. We have detailed the features and performance of liquefied recovery devices, gas recovery devices, and combus gas recovery devices, so please take a moment to read through them. [Featured Products] ■ Liquefied Recovery Devices ■ Gas Recovery Devices ■ Combus Gas Recovery Devices ■ SF6 Decomposition Gas Removal Cylinders ■ Recovery Related Equipment and Analytical Instruments *For more details, please refer to the PDF materials or feel free to contact us.

Company：日本酸素東関東
Price：Other

Gas recovery/treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Energy-saving / Flowing Liquid Film Heat Recovery Device / ReCaLo+

By utilizing a heat recovery system without wasting waste hot water, we can reduce CO2 emissions and costs!

ReCaLo+ (Rikaro+)” is a liquid film type heat recovery device that recovers thermal energy from warm wastewater, helping to reduce fuel costs and CO2 emissions. The main body of the heat recovery device performs high-efficiency heat recovery without using electricity or fuel. The heat recovery water that passes through the device can be used for boiler make-up water, heating, and road heating. Additionally, installation in existing facilities has become easy, and the effects can be felt immediately. Many customers have reported that the energy-saving effects are easy to see, the cost-effectiveness is good, and maintenance is simple. 【Benefits of Installation】 ■ Zero electricity and fuel energy ■ Running costs are zero ■ Reduction in boiler fuel costs ■ Significant reduction in CO2 emissions with consideration for the environment *For more details, please download the PDF or feel free to contact us.

Company：兼松ペトロ本社　関東支店　北海道支店　中部支店　関西支店　中国支店　九州支店　仙台営業所
Price：Other

Heat exchanger
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Paper filter type coolant liquid/sludge recovery device

Collect non-magnetic sludge with a filter! ❶ Filter sludge from 10 to 95μ ❷ Available with magnet + paper filter model ❸ Available with high flow processing model

(Main Features) ◎ Filters sludge in coolant liquid using a paper filter ◎ Capable of filtering from 10 to 95μ by selecting the appropriate filter paper ◎ A dual set model with both "magnet type" and "paper filter type" is also available! ◎ Significantly reduces the consumption of filter paper, lowering running costs (What's Different!) ★ Significantly reduces unnecessary consumption of filter paper with a "float switch"!

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case studies of the sludge recovery device "FINE MAG" (Machining / 3 selections)

◆ Introducing the coolant sludge recovery device "FINE MAG" series / "Cutting Processing / Three Successful Case Studies"!

◎ Optimal for cutting processing ・The lifespan of machining center cutting fluid for castings has doubled! ◆ Issues (Before introduction) ● In casting cutting, fine chips and a large amount of carbon cause high-pressure pumps and nozzles to clog, leading to frequent troubles. ● Poor filtration precision of the coolant results in defective products due to scratches, etc. ◇ Effects of introduction 〇 The lifespan of cutting fluid has doubled, and the defect rate has been reduced by 20%. 〇 The discharged sludge is almost dry, and the condition remains unchanged even after six years, etc.

Company：サノテック
Price：Other

Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Grinding coolant liquid sludge recovery case (▲Issue: Frequent malfunctions!)

(Surface grinding) Sludge recovery case study (Company A) ▲ The issues due to aging deterioration and clogging have become severe!

This is a case study regarding the recovery of coolant sludge in grinding processing, addressing issues that may arise. We hope this serves as a reference for those facing similar challenges. - Company Name: Company A - Issue: "Problems due to aging deterioration and clogging have become more severe!" ★ For more details, please be sure to check the "Case Catalog." ☆ For optimal recovery of coolant sludge in "grinding processing," please also refer to the product catalog for "FINE MAG/K type." ☆ We can provide proposals in collaboration with the manufacturer, taking into account usage conditions and installation environments.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting coolant liquid sludge recovery case (▲Issue: Nozzle gets clogged!)

(Cutting Process) Sludge Recovery Case Study (Company I) ▲ Nozzle clogged with cast iron cutting chips, resulting in defective products!

This is a case study regarding the recovery of coolant sludge in cutting processes, addressing common issues. We hope it serves as a reference for those facing similar challenges. - Company Name: Company I - Issue: "Clogging of nozzles and defective products due to chips from cast iron cutting!" ★ For more details, please be sure to check the "Case Catalog." ☆ For optimal recovery of coolant sludge in "cutting processes," please refer to the product catalog for "FINE MAG / KS type." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case study of coolant liquid sludge recovery in ultra-hard grinding (▲Issue: Negative impact on quality)

(Carbide Grinding Processing) Sludge Recovery Case Study (Company T) ▲ Carbide sludge in coolant liquid negatively impacts quality!

This is a case study regarding the recovery of coolant sludge in ultra-hard and ultra-precision grinding processes. We hope it serves as a reference for those facing similar challenges. - Company Name: Company T - Issue: "The ultra-hard sludge in the liquid negatively affects quality; if only there were a compact separator!" ★ For more details, please refer to the "Case Study Catalog." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Optimal for Gear Processing" Sludge Recovery Device "FINE MAG/KS

Shaving processing and gear processing" is ideal for sludge recovery in coolant! "FINE MAG/KS type

Are you facing these issues with shaving processing and gear processing? ▲ Struggling with degreasing work! ▲ Rubber rollers are getting damaged by chips! The "FINE MAG/KS type" solves these challenges. (Different magnetic drum) A magnetic drum with high surface hardness and flatness supports long life even in shaving processing. (Different squeezing roller) Made from a newly developed material that is less prone to chip accumulation, with improved oil resistance. It provides stable squeezing effects over a long period. ★ For details, please refer to the "Product Catalog." ☆ Also check out the "Gear Processing / Case Studies" (from Company N). ☆ We can collaborate with the manufacturer to provide proposals based on usage conditions and installation environments.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

(Cogwheel) Coolant liquid sludge recovery case (▲Issue: Cutter wear!)

(Cutting Gear Processing) Sludge Recovery Case Study (Company N) ▲ Fine particles mixed in the recovered oil-based coolant, causing cutter wear!

This is a case study on solving issues related to coolant sludge recovery in gear machining. We hope this reference material will be helpful for those facing similar concerns. - Company Name: Company N - Challenge: "Fine particles are mixed into the recovered oil-based coolant, causing wear on pumps and cutters!" ★ For more details, please be sure to check the "Case Study Catalog." ☆ Please also refer to the product catalog for "(Gear Machining) FINE MAG / KS Type." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eight Examples of Sludge Recovery in Grinding Processing (Improvement of Deposits in Tanks, etc.)

◆ Introduction to "8 Successful Cases" of Sludge Recovery from Coolant in Grinding Processing!

◎ Ideal for grinding processing - Significant improvement in the recovery of sludge from deposits in the tank generated during grinding processing! ◆ Issues (Before Implementation) ● Used a competitor's magnetic separator, but the magnetic drum and rubber wore out in less than a year ● Sludge being discharged was sticky, etc. ◇ Implementation Effects ○ Eliminated tank deposits and removed abrasives, reducing impurities below specified levels ○ Sold sludge as valuable material to scrap dealers, etc.

Company：サノテック
Price：Other

Filtration Equipment
High-power magnetic separator, magnetic filter
Separation device
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case 5 of coolant sludge recovery in grinding (▲Operation stopped due to insufficient recovery)

[Issue] Insufficient sludge recovery, and operational stoppages during work!

◇ Introduction Background 　　〇 Originally used a coolant system from another company 　　〇 Decided to introduce FINEMAG, which had already gained recognition for its quality within the company, among other reasons ◆ Introduction Effects 　　● The amount of sludge collected initially was astonishingly large, something I had never seen before 　　● The durability of the rollers is excellent, allowing for long-term use 　　● The performance of the filtration is outstanding, among other benefits

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting coolant sludge recovery case 1 (▲ Frequent troubles occurring!)

[Issue] Problems frequently occur due to clogging of high-pressure pumps and nozzles!

◇ Introduction Background 　　〇 Due to the fine chips and large amounts of carbon in cast iron cutting, troubles caused by high-pressure pump and nozzle clogging frequently occurred. 　　〇 Additionally, poor filtration accuracy of the coolant led to defects caused by scratches, among other issues. ◆ Introduction Effects 　　● As a result of a two-month test, the lifespan of the cutting fluid was extended to twice as long, and the defect rate was reduced by 20%, yielding remarkable results. 　　● In cutting processes, the shape of the sludge differs from that in grinding processes, making it recommended. 　　● The discharged sludge is mostly dry, and even after six years of use, its condition remains unchanged, among other benefits.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting coolant sludge recovery case 2 (Tank fills halfway in 3 months)

[Issue] Fine sludge cannot be completely removed, and it accumulates to about half of the tank in three months!

◇ Introduction Background 　　〇 The conveyor for chip discharge alone cannot remove the fine sludge generated during the cast iron processing. 　　〇 Sludge adheres inside the machine, necessitating frequent maintenance to prevent issues such as pipe and pump blockages. 　　〇 Cleaning, which costs about 100,000 yen each time, needed to be done four times a year, among other reasons. ◆ Introduction Effects 　　● After one and a half years of implementation, the amount of accumulated chips in the six months following installation was less than that in the three months before installation. 　　● Cleaning frequency reduced from once every three months to once every six months. 　　● In addition to labor and cleaning costs, coolant expenses were also reduced to half, down to 200,000 yen after implementation, among other benefits.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Two case studies on solving the "sludge problem" of cutting fluid in gear / ultra-hard grinding processing.

The "sludge from coolant fluid" generated during "gear processing / carbide grinding" causes various problems. Please refer to the "case studies for problem-solving."

◆ "Gear Processing" 　・Issue/Case 1: ▲ The oil removal work for the contact powder is difficult, and the floor is covered in oil! ◇ "Cemented Carbide and Ultra-Precision Grinding Processing" 　・Issue/Case 2: ▲ Find a separator that can recover cemented carbide sludge!

Company：サノテック
Price：Other

Filtration Equipment
High-power magnetic separator, magnetic filter
Separation device
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] "Ceramics" Pipe Clogging, Countermeasure Case / MAGPICKER

The introduction of "MAGPICKER (wet type)" in the chemical materials manufacturing process enables cost reduction for pipe cleaning and replacement!

◆ Issue - During the processing of chemical materials, the accumulation of waste and scrap in the piping leads to blockages, resulting in significant costs for cleaning the pipes and repairing or replacing piping equipment. ◆ Overview - By using "MAGPICKER" upstream in the piping, it has been confirmed that approximately 30 percent of both magnetic and non-magnetic materials contained in the waste and scrap can be recovered simultaneously. As a result, the concentration of non-magnetic materials in the liquid has decreased, reducing the frequency of pipe blockages and sediment layer cleaning. ◆ Effects and Benefits - This leads to a significant reduction in pipe cleaning costs and repair expenses. ☆ Please download the "Product Catalog" to check the specifications. ☆ Rental of the "Evaluation Unit" can be arranged.

Company：サノテック
Price：Other

Ceramics
Filtration Equipment
Solid-liquid separation filter
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solvent Recovery Device "KRE Series"

Acquisition of ISO 14000! A solvent recovery device that enables reduction of new liquid purchase costs and waste disposal costs.

The "KRE Series" is a solvent recovery device that can distill dirty solvents and cleaning agents to regenerate them to a state similar to new liquid. It has obtained explosion-proof structure certification from Canada's CSA and America's UL. All operations can be performed with just one finger, making recycling easy for anyone. Additionally, it features a self-diagnosis function that can automatically identify malfunctioning parts. 【Features】 ■ Can distill dirty solvents and cleaning agents to regenerate them to a state similar to new liquid ■ Safe ■ Easy operation ■ Self-diagnosis function *For more details, please refer to the PDF materials or feel free to contact us.

Company：クリーンテクノス
Price：Other

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solvent regeneration recovery device "Harmaster II"

Since high-temperature operation is possible, recovery of high-boiling point solvents is also feasible! Solvent regeneration recovery device.

The "Harmaster II" is a solvent regeneration recovery device designed with a compact square shape that can be installed in narrow spaces. Due to its low overall height and large internal volume, it allows for easy handling of 18-liter cans. The main body of the regenerator is made of SUS316L, which is particularly resistant to thermal expansion and contraction and has excellent acid resistance, ensuring long-lasting performance without concerns about corrosion. The cooling pipes use flexible tubes made of SUS316L, providing excellent heat exchange efficiency, durability, and a short pathway, eliminating worries about blockages. 【Features】 ■ Capable of high-temperature operation, allowing for the recovery of high-boiling-point solvents ■ Equipped with an energy-efficient casting heater that has a fast heating rate ■ Allows for the direct insertion of 18-liter cans, preventing residue from remaining in the regenerator and making handling easy ■ Particularly efficient operation when using heat transfer oil ■ Digital temperature display for easy monitoring of the current temperature *For more details, please download the PDF or feel free to contact us.

Company：サーブ本社
Price：Other

others
Contract manufacturing
Other industrial robots
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Silver recovery device

Maximum processing capacity is 50L! Proposal for a device to easily recover silver from COD-Mn analysis wastewater.

The "Silver Recovery Device" is a device that allows for easy recovery of silver from COD-Mn analysis wastewater. After analysis, the wastewater is either poured into a tank or connected to the automatic COD measurement wastewater line from Hiranuma Sangyo. Sodium chloride is added, and the stirrer (with a timer stop) is activated to begin processing. After processing, the wastewater (either pumped or naturally drained) is repeated, and when silver chloride accumulates, it is recovered from the lower valve. 【Features】 ■ Easy recovery of silver from COD-Mn analysis wastewater ■ Sodium chloride is added, and the stirrer is activated to start processing ■ When silver chloride accumulates, it is recovered from the lower valve *For more details, please refer to the PDF document or feel free to contact us.

Company：Es1
Price：Other

Other physicochemical equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-efficiency oil separation and recovery device "ADDOX OIL Device"

Separates about 95% of oils and fats from wastewater and automatically recovers them! Reduces industrial waste costs through recycling and valuable processing.

The "ADDOX OIL Device" is a compact, energy-efficient oil and fat separation and recovery unit. It separates approximately 95% of oils and fats from wastewater and automatically recovers them. It features a vertical design that is compact and space-saving, requiring only a suction pump for power. It can be easily added as a pre-treatment device for sewer discharge or treatment facilities. Made entirely of stainless steel, it is capable of handling solidifying animal and vegetable oils such as palm oil and lard. 【Features】 ■ Removes approximately 95% of oil content ■ Prevents biological treatment function failure ■ Reduces the occurrence of unpleasant odors ■ Increases treatment capacity and improves water quality ■ Suitable for both food oils and mineral oils *For more details, please refer to the PDF document or feel free to contact us.

Company：山陽施設工業
Price：Other

Oil-water separator
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solvent recovery device EcoClear OSR-B300

Trapped from -40℃ to room temperature! Using SUS capacitors with over 16 times the thermal conductivity of glass.

The EcoClair OSR-B300 organic solvent recovery device combines our unique high-insulation stainless steel condenser with a low-temperature refrigeration unit, allowing it to cool efficiently below -30°C without a decrease in cooling capacity even during summer, and effectively recover organic solvents under reduced pressure. This system is patented and uniquely designed by our company, making it an unparalleled organic solvent recovery device. Additionally, EcoClair does not require a cooling water circulation system, enabling significant space savings. The more you use it, the more you will appreciate its benefits; it is a highly recommended product that we encourage you to try.

Company：テクノシグマ
Price：100,000 yen-500,000 yen

Other physicochemical equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Custom-made and customized equipment: Shelf-type drying recovery device.

Slurry, inorganic powder materials, polymer materials, special material development.

【Product Information】 - Uniform heating with a hot plate - Evaporation and drying in an inert gas (nitrogen) atmosphere - Complies with user-specified safety design

Company：テクノシグマ
Price：1 million yen-5 million yen

Other contract services
Contract measurement
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Custom-made and Customized Equipment] Automatic Solvent Cleaning and Solvent Recovery Soxhlet

Closed-type, automatic sock-like extraction medical supplies solvent cleaning / solvent recovery and regeneration device

【Custom and Customized Equipment】 At Techno Sigma, we undertake the contract development and manufacturing of custom equipment and bench/pilot facilities to meet our customers' needs, in addition to our lineup of standard products. Please feel free to contact us. 【Product Information】 - Automatically performs continuous operation for the concentration of reaction mixtures, solvent replacement, and product discharge. - Input amount, concentration amount, and replacement liquid amount can be set and controlled. - Equipped with various data logging functions.

Company：テクノシグマ
Price：5 million yen-10 million yen

Other contract services
Contract measurement
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solvent regeneration for environmental measures and cost reduction! VOC recovery device REARTHⓇ

Achieving a removal rate of over 99% through a unique compression deep cooling condensation method. Simultaneously realizing environmental measures and cost reduction!

We would like to introduce the organic solvent gas (VOC) recovery device "REARTHⓇ" manufactured by Morikawa Co., Ltd., handled by Nisshinka Seisakusho. This product boasts a removal rate of over 99% by adopting Morikawa's unique "compressed deep cooling condensation method." 【Features】 □ Can be used with a wide range of solvents and applications, flexibly accommodating solvent changes □ Can be used with a variety of emission equipment based on numerous installation records □ Significantly reduces solvent usage with a high removal rate, demonstrating excellent economic benefits □ Recovers solvents with reusable liquid quality □ Compact design that does not take up much space, eliminating the need for drainage equipment Additionally, we also offer the "REARTHⓇ S Series F type," which is compatible with HFO-based fluorinated solvents and equipped with Morikawa's unique "special adsorbent," while maintaining the "compressed deep cooling condensation method." HFO-based fluorinated solvents, which are considered to have a lower environmental impact and higher safety for human health compared to other halogenated solvents, are often seen as a barrier to new installations due to their high liquid unit price. However, by introducing this device, it becomes possible to operate while keeping running costs down. For more details, please refer to the PDF materials or contact us.

Company：日進化成
Price：Other

Other cleaning machines
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

IK Oil Skimmer "OS Type" [Capable of collecting floating oil at the source!]

Introducing a compact, lightweight, and immediately operable stainless steel oil recovery device that is resistant to corrosion!

The "OS type" is a floating oil recovery device equipped with a filter cloth "IK Ron Mesh." It can collect floating oil at the source in oil tanks, drainage ditches, oil traps, etc. Due to its small and compact design, it requires little installation space and is cost-effective. 【Features】 ■ Collects floating oil from various industries at the source * Low-viscosity oil (kerosene), high-viscosity oil (heavy oil), mineral oil, vegetable and animal oils, thin film oils, etc. ■ Small, lightweight, and ready for immediate operation ■ Made of stainless steel, resistant to corrosion * For more details, please refer to the PDF document or feel free to contact us.

Company：日本技建
Price：Other

Other cleaning machines
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chip separation and recovery machine "Separator TG100/TG150"

A compact body that balances lightweight design with beauty and functionality! Achieves automatic collection of cutting chips!

The "Separator TG100/TG150" is a chip separation and recovery machine that automatically separates aluminum cutting chips from cutting fluid. Equipped with a screw conveyor and a large-capacity filter, it features an energy-saving design that eliminates the need for a single motor drive and backwashing. Installation into existing manually operated cutting fluid tanks can be done smoothly. 【Features】 ■ Automatic separation of aluminum cutting chips and cutting fluid ■ Compact and lightweight ■ Equipped with a screw conveyor and a large-capacity filter ■ Energy-saving design ■ Smooth installation into existing manually operated cutting fluid tanks *For more details, please download the PDF or feel free to contact us.

Company：ツカサ技研
Price：Other

Sorting machine
Conveyor
Other conveying machines
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Liquid suction recovery vacuum cleaner 'C-10EX (IT-40L) CFE'

Introducing a vacuum cleaner certified to CSA standards, ideal for 3D printing and additive manufacturing!

The "C-10EX (IT-40L) CFE" is a compact liquid tank separator vacuum cleaner suitable for 3D printing and additive manufacturing. It has a recovery tank that holds 12.3 liters of water, and the capacity of the conductive recovery bag is 3 liters. If collected directly without using a bag, it can recover 3.8 liters of dust. Additionally, it is equipped with an exhaust valve that automatically discharges gases generated inside the unit. 【Features】 ■ Vacuum cleaner certified to CSA standards (dust explosion protection level) ■ Collects and neutralizes dust with potential for explosion in a wet liquid tank (water) ■ Designed for collection in hazardous areas classified as ZONE 22 ■ Equipped with a filter element for moisture removal (CFE) ■ Electric drive system (AC100V) *For more details, please refer to the PDF document or feel free to contact us.

Company：フォンシュレーダージャパンタイガーバック事業部
Price：Other

Industrial Vacuum Cleaners
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Recovery device Product List and Ranking from 175 Manufacturers, Suppliers and Companies | IPROS GMS

Recovery device Manufacturer, Suppliers and Company Rankings

Recovery device Product ranking