Recovery device Product List and Ranking from 178 Manufacturers, Suppliers and Companies

Grinding coolant liquid sludge recovery case (▲Issue: High oil content in iron powder!)

(Surface grinding) Sludge recovery case study (Company I) ▲ Iron powder generated during manufacturing retains a lot of moisture and oil!

This is a case study regarding the recovery of coolant sludge in grinding processes, addressing common issues. We hope it serves as a reference for those facing similar challenges. - Company Name: Company I - Issue: "We were troubled by the fact that a lot of moisture and oil remained in the iron powder generated during manufacturing!" ★ For more details, please be sure to check the "Case Study Catalog." ☆ For optimal coolant sludge recovery in "grinding processes," please also refer to the product catalog for "FINE MAG/K type." ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Grinding coolant liquid sludge recovery case (▲Issue: Low filtration accuracy!)

(Surface grinding) Sludge recovery case study (Company N) ▲ Is there anything better in terms of durability and filtration accuracy?

This is a case study regarding the recovery of coolant sludge in grinding processing. We hope it serves as a reference for those facing similar challenges. - Company Name: Company N - Issue: "I am dissatisfied with the durability and filtration accuracy of the product currently in use!" ★ For more details, please be sure to check the "Case Catalog." ☆ For optimal coolant sludge recovery in "grinding processing," please also refer to the product catalog for "FINE MAG/K type." ☆ We can provide proposals in collaboration with the manufacturer, taking into account the usage conditions and installation environment.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Optimal for Cutting Processing" Sludge Recovery Device "FINE MAG/KS

Optimal for sludge recovery in coolant liquids during cutting processes! "FINE MAG/KS type"

(This is for cutting processing) Perfect for those who have the following concerns. ▲ High defect rate! ▲ High-pressure pumps and nozzles are prone to clogging! The main cause is "sludge in the tank." The "FINE MAG/KS type" solves these issues. (Main features) 〇 Sludge recovery rate of over 90% (by weight) 〇 No consumables required 〇 Sludge condition is dry, etc. (Technologies that achieve this) 1. Magnet arrangement designed for chips 2. Special hardening treatment on the drum surface 3. Forced drive type squeezing roller, etc. ★ For more details, please refer to the "Product Catalog." ☆ Please also check "Cutting Processing / Problem-Solving Case Studies" (Company I / Company IJ). ☆ We can collaborate with manufacturers to provide proposals based on usage conditions and installation environments.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case study of coolant liquid sludge recovery (▲Issue: Frequent maintenance!)

(Cutting processing) Sludge recovery case (IJ) ▲ Fine sludge from casting processing cannot be completely removed, requiring frequent maintenance!

This is a case study regarding the recovery of coolant sludge in cutting processes, addressing issues you may be facing. We hope this serves as a reference for those with similar challenges. - Company Name: IJ Corporation - Issue: "Unable to completely remove fine sludge from cast processing, requiring frequent maintenance!" ★ For more details, please be sure to check the "Case Catalog." ☆ For optimal sludge recovery of coolant in "cutting processes," please refer to the product catalog for "FINE MAG / KS type." ☆ We can provide proposals in collaboration with the manufacturer, taking into account usage conditions and installation environments.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Optimal for ultra-hard grinding processing" Sludge recovery device "FINE MAG/UK

Optimal for sludge recovery in coolant liquid for ultra-hard and ultra-precision grinding processing! 'FINE MAG/UK Type'

Do you have any of these concerns? ▲ Struggling with the recovery of sludge that is difficult to magnetize ▲ How can I recover fine powder sludge? The "FINE MAG/UK type" solves these issues. (Main Features) 〇 High magnetic force of 9000 Gauss (drum surface) 〇 Effective in recovering sludge that is difficult to magnetize (such as from ultra-hard tool grinding) 〇 Effective in recovering fine sludge (from honing, lapping, electrical discharge machining, ultra-finishing), etc. The "FINE MAG/UK," capable of generating a high magnetic field, has great potential as a recovery device for fine magnetic metal powders. It can be used not only for chip removal generated in parts processing but also for recovering raw materials and removing impurities from fine particles, among other applications beyond grinding sludge removal. ★ For more details, please refer to the "Product Catalog." ☆ Please also check the "Grinding Processing / Problem-Solving Case Studies" (for Company T). ☆ We can collaborate with the manufacturer to provide proposals based on usage conditions and installation environments.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

14 Manufacturing Managers Speak / Coolant Sludge [Successful Recovery Case]

Understand the 'sludge recovery methods for coolant fluids' for grinding and cutting processes! Numerous examples such as 'significantly reduced cleaning and maintenance frequency / achieved cost reduction'!

The high-dimensional magnet array "FINE MAG" removes fine sludge and continues to demonstrate excellent dewatering and degreasing performance over a long period. <Voices of 14 Site Managers> 1. Maintenance-free, no liquid replacement for 7 years 2. Zero degreasing in shaving processing, contributing to extended pump life 3. Successfully achieved significant cuts in maintenance costs 4. Contributed to the recovery of particulate sludge through secondary filtration 5. Significant reduction in sludge accumulation in the coolant tank of machining centers 6. The lifespan of cutting fluid in machining centers for castings has doubled 7. Quality improvement through ultra-hard sludge recovery 8. Greatly reduced costs and time loss in cleaning 9. Stable quality that maintains the obvious. Over 30 years of trust and results 10. Grinding sludge sold to scrap dealers as valuable material 11. Achieved high dewatering performance of sludge and high durability of rollers 12. Significant reduction in maintenance such as coolant liquid replacement and cleaning 13. Reduced operational costs due to increased lifespan of the magnetic drum 14. Recovery rate is three times that of conventional machines, and cleaning frequency is one-third of what it used to be.

Company：サノテック
Price：Other

Filtration Equipment
Separation device
Solid-liquid separation filter
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Four Examples of Sludge Recovery in Cutting Processing (Doubling the Lifespan of Cutting Fluids! and More)

◆ Introduction to "4 Successful Cases" of Sludge Recovery from Cutting Process/Coolant Liquid!

◎ Optimal for cutting processing ・The lifespan of machining center cutting fluid for castings has doubled! ◆ Issues (Before introduction) ● In casting cutting, fine chips and the large amount of carbon cause high-pressure pumps and nozzles to clog, leading to frequent troubles. ● Poor filtration precision of the coolant results in defective products due to scratches, etc. ◇ Effects of introduction 〇 The lifespan of the cutting fluid has doubled, and the defect rate has been reduced by 20%. 〇 The discharged sludge is almost dry, and the condition remains unchanged even after six years, etc.

Company：サノテック
Price：Other

Filtration Equipment
Separation device
High-power magnetic separator, magnetic filter
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Example 1 of Sludge Recovery in Ultra-Hard Grinding (Quality Improvement through Sludge Recovery!)

◆ Introduction to "Successful Case Study 1" for Sludge Recovery of Coolant Liquid in Hard and Grinding Processing!

◆ Issues (Before Implementation) 　● Maintenance tasks such as tank cleaning are difficult with only paper filters. 　● Fine sludge in the coolant adversely affects processing quality. 　● We were looking for a separator that could "recover" "hard" sludge, among other things. ◇ Implementation Effects 　〇 The sludge recovery rate improved by approximately 4 to 5 times compared to conventional "filtration devices." 　〇 Processing quality improved as fine "hard sludge" no longer causes scratches. 　〇 High dewatering performance with almost no moisture in the sludge, reducing the burden of recovery work, among other benefits.

Company：サノテック
Price：Other

Separation device
High-power magnetic separator, magnetic filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Gear Processing] Sludge Recovery Case Study 1 Selection (Reduced one drum of replenishing liquid!)

◆ Introduction to "Successful Case 1 Selection" for Gear Processing / Coolant Sludge Recovery!

◎ Ideal for gear machining ・Zero degreasing during shaving processing, contributing to extended pump life! ・No degreasing work required! ◆ Issues (before implementation) ● The coolant in the tank quickly decreases, requiring frequent replenishment ● The oil-based coolant collected by the degreasing machine contains fine particles ● Pumps and cutters wear out frequently, etc. ◇ Implementation effects 〇 Chips processed by the degreasing machine are discharged, eliminating the need for degreasing work 〇 The absence of degreasing and liquid replenishment tasks has improved productivity 〇 The amount of coolant replenished has been reduced by more than one drum per year per machine, etc.

Company：サノテック
Price：Other

Filtration Equipment
Separation device
High-power magnetic separator, magnetic filter
Recovery device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Adsorbing "magnetic fine powder" from the slurry onto a magnet for recovery and removal.

Achieving continuous concentration of slurry and efficiently adjusting to the appropriate moisture content. Responding to the optimization of the drying process (time reduction).

1. Overview Continuous concentration of magnetic paste such as nickel and ferrite to achieve an appropriate moisture content. - Recovery of magnetic materials using a rotating powerful magnetic drum. - Achieving the appropriate moisture content by adjusting the rotation speed and the pressure of the squeezing rollers. 2. Target Industries Manufacturers of electronic components and magnetic fine powders, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ As the fine powder of magnetic materials becomes smaller, the filtration time using filters increases. ▲ It is difficult to secure the optimal moisture content for handling paste and shortening the drying process, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional batch processing with filters has been significantly reduced. ◎ Breakthrough of the limits of filter processing when advancing fine powder production due to high performance. ☆ Please download the "catalog" to check the specifications. ★ "Evaluation units" are available for loan upon arrangement.

Company：サノテック
Price：Other

Separation device
High-power magnetic separator, magnetic filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Example 1 of coolant sludge recovery in grinding (drum worn out in less than a year!)

Significant improvement in the recovery of grinding sludge from coolant tank deposits!

Maintains initial performance, resistant to breakage without friction. Sells grinding sludge as a valuable material to scrap dealers. ◇ Introduction Background 　　○ Used magnetic separators from other companies, but all wore out the magnetic drum and rubber in less than a year. 　　○ No wear on rollers, etc. ◆ Introduction Effects 　　● Eliminated tank deposits and reduced impurities below specified levels by removing abrasive particles with Fine Clon. 　　● Sold sludge as a valuable material to scrap dealers, etc.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study 5 on Grinding Coolant Sludge Recovery (Significant Reduction in Coolant Liquid Replacement!)

Maintenance such as coolant fluid replacement and cleaning has drastically decreased!

Collected a large amount of sludge and satisfied with the high dewatering performance. ◇ Introduction Background 　　〇 Originally used a coolant system from another company 　　〇 Decided to introduce FINEMAG, which had already gained recognition for its quality within the company, among other reasons ◆ Introduction Effects 　　● The amount of sludge collected initially was astonishingly large, something I had never seen before 　　● The durability of the rollers is excellent, allowing for long-term use 　　● The dewatering performance is outstanding, among other points

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study 2 on Grinding Coolant Sludge Recovery (Improved Dewatering Performance, Zero Waste Liquid!)

[Objective] Improve suction performance to achieve a dry floor and zero waste liquid!

◇ Introduction Background 　　○ Activities themed around creating a dry floor and a clean factory & achieving zero wastewater 　　○ Realized zero liquid exchange operation for 7 years, etc. ◆ Introduction Effects 　　● Effect of optimizing the arrangement of magnets to recover abrasive particles along with magnetic sludge 　　● Very well dewatered, with moisture content below 30%, etc.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case 4 of coolant sludge recovery in grinding (▲High moisture and oil content in iron powder)

[Issue] During manufacturing, a lot of moisture and oil residue remains in the iron powder, causing concern!

◇ Introduction Background 　　〇 Before implementation, we struggled with a situation where a lot of moisture and oil remained in the iron powder generated during manufacturing. 　　〇 After about six months of testing, we decided to implement it due to its unexpectedly significant effects, among other reasons. ◆ Implementation Effects 　　● Even when using difficult-to-remove oil-based coolants, sludge was effectively recovered. 　　● Operational costs were also significantly reduced compared to our initial expectations, among other benefits.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case 6 of coolant sludge recovery in grinding (▲ Severe clogging issues!)

[Issue] Severe malfunctions due to aging deterioration and clogging!

◇ Introduction Background 　　〇 Due to severe issues caused by aging deterioration and clogging, a switch was considered 　　〇 Achieving maintenance-free operation had become a challenge, among other reasons ◆ Implementation Effects 　　● Achieved maintenance-free operation 　　● Cleaning tasks during long holidays for the line could be omitted 　　● Significantly reduced both working time and costs, among other benefits

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting coolant sludge recovery case 3 (▲ Sludge accumulated in the tank)

[Issue] Particulate sludge that cannot be removed accumulates at the bottom of the tank after cutting!

◇ Introduction Background 　　〇 Initially, we inquired with the manufacturer about the recovery of accumulated sludge, but it became clear that the required work time, personnel, and estimates greatly exceeded our expectations. 　　〇 The longer the maintenance work takes, the more it disrupts normal operations, etc. ◆ Ease of Implementation 　　● We communicated our desire for a movable format since we wanted to use it across multiple machining centers. 　　● Even during the evaluation equipment loan, we felt reassured about the implementation as there was no pressure for purchase, which contributed to our comfort in proceeding.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Super Hard Grinding】Coolant Sludge Recovery (▲Maintenance is difficult with paper)

[Issue] Maintenance tasks such as tank cleaning are difficult with just a paper filter!

◆ Issues (Before Implementation) 　● Fine sludge in the coolant adversely affects processing quality. 　● Looking for a separator that can "recover" "hard" sludge, etc. ◇ Implementation Effects 　〇 Sludge recovery rate improved by approximately 4 to 5 times compared to conventional "filtration devices." 　〇 Processing quality improved as fine "hard sludge" no longer causes scratches. 　〇 High dewatering performance with almost no moisture in the sludge, reducing the burden of recovery work, etc.

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sludge Recovery Case Studies] Challenges and Recovery of Coolant Liquid Sludge (14 Cases)

[Site Manager Speaks] Coolant Sludge Recovery: 14 Case Studies of Problem Solving and Success

<Voices of 14 Site Managers> 01 (Grinding) ▲ Drum and rubber wear out in less than a year! 02 (Grinding) ▲ I want to improve the squeezing performance! 03 (Grinding) ▲ The maintenance costs for coolant and liquid replacement are burdensome! 04 (Grinding) ▲ There is too much moisture and oil remaining in the iron powder generated during manufacturing! 05 (Grinding) ▲ Sludge cannot be sufficiently collected, leading to operational stoppages during work! 06 (Grinding) ▲ Issues due to aging deterioration and clogging are severe! 07 (Grinding) ▲ I want to continue using the cylindrical grinding machine while maintaining its precise accuracy! 08 (Grinding) ▲ When the material used changes, sludge tends to accumulate easily! 09 (Cutting) ▲ Problems due to clogging of high-pressure pumps and nozzles occur frequently! 10 (Cutting) ▲ Fine sludge cannot be completely removed, accumulating to about half of the tank in three months! 11 (Cutting) ▲ Particulate sludge that cannot be removed after cutting accumulates at the bottom of the tank! 12 (Cutting) ▲ The frequency of filter replacement is high, considering other methods! 13 (Gear) ▲ Oil-soaked sludge is heavy, making the oil removal process difficult, and the floor is also covered in oil! 14 (Carbide) ▲ Cleaning the tank is difficult with just a paper filter!

Company：サノテック
Price：Other

Separation device
Solid-liquid separation filter
Filtration Equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eight Examples of Solutions to Problems Caused by "Sludge" Generated in Grinding Processing

The "sludge" generated during "grinding processing" causes various problems. We will introduce examples of "what challenges arise" and "how they were resolved."

◇ Here are various issues caused by sludge that have been resolved in each case. - Case Study 1: Drums and rubber wear out in less than a year! - Case Study 2: I want to reduce the frequency of coolant liquid replacement! - Case Study 3: I want to reduce troublesome maintenance tasks! - Case Study 4: A lot of moisture and oil remain in the iron powder! - Case Study 5: Dissatisfaction with durability and filtration accuracy! - Case Study 6: Severe issues due to clogging! - Case Study 7: I want to remove fine sludge with magnets and paper! - Case Study 8: I want to reduce costs and time loss in cleaning!

Company：サノテック
Price：Other

Filtration Equipment
High-power magnetic separator, magnetic filter
Separation device
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Problems Caused by "Sludge" in Cutting Fluid: Four Case Studies of Solutions

The "sludge" generated during "cutting processing" causes various problems. Here are some examples of "what problems occurred" and "how they were resolved."

◇ Please refer to various problems caused by sludge and case studies for solutions. - Issue/Case 1: ▲ Frequent nozzle clogging troubles due to fine chips! - Issue/Case 2: ▲ Sludge sticking inside the machine, causing troubles! - Issue/Case 3: ▲ Unremovable particulate sludge accumulating at the bottom of the tank! - Issue/Case 4: ▲ High frequency of filter replacements; is there any other method?

Company：サノテック
Price：Other

Filtration Equipment
High-power magnetic separator, magnetic filter
Separation device
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sludge treatment equipment

Achieved a reduction in waste oil with moisture content to about 1/4!

The sludge treatment device is a product that is expected to significantly reduce the frequency of waste oil discharge and the costs associated with it by reducing the volume of water contained in the sludge (waste oil). By processing bilge water with a high moisture content, it is possible to save on parts costs through reduced operation of oil-water separators and to lessen the labor of the crew. Additionally, there are three methods of treatment available that can be selected and used in combination according to the operation of the vessel. 【Treatment Methods】 ■ Evaporation separation method (evaporates only moisture and releases it into the atmosphere) ■ Settling method (heats and allows the sludge to stand, discharging only the separated moisture) ■ Cascade method (slowly shifts the sludge while heating, separating it through overflow) *For more details, please download the PDF or feel free to contact us.

Company：昌永産業
Price：Other

Water treatment equipment
Wastewater/wastewater treatment equipment
Other water treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sludge collection device for tanks "Sludge Barrier Series"

Model expansion! A new cylindrical model has been added to the popular series.

The "Sludge Barrier Series" is a cylindrical magnetic sludge recovery device for tanks. We offer the "SB-D60/SB-D90," which has expanded the range of installation for existing coolant tanks. Additionally, we have a comprehensive lineup including the "ASB480," "SB4012," and "SB4024." 【Features】 ■ Space-saving installation due to its cylindrical shape ■ Adjustable installation height relative to the liquid level ■ Allows for tank cleaning without getting hands dirty *For more details, please refer to the PDF materials or feel free to contact us.

Company：椿本マシナリー
Price：Other

Powder Conveyor Device
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Seminar] Saga City: New Industry Creation Strategy for Resource Circulation Type through Algae Cultivation, etc.

<Tokyo Event> CO2 Utilization by Cleaning Plant CCU [Venue Attendance Only]

Our company will hold a business seminar. 【Seminar Details】 ■ Date and Time: April 3, 2026 (Friday) 13:30 - 15:30 (Doors open at 13:00) ■ Venue: JPI Conference Square ■ Address: 5-2-32 Minamiazabu, Minato-ku, Tokyo, Kowa Hiroo Building ■ Participation Method: In-person attendance ■ Instructor: Kazuyuki Tanaka Head of the GX Promotion Division, Environmental Department, Saga City *For more details, please refer to the PDF document or feel free to contact us.

Company：日本計画研究所
Price：Other

others
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chip Transport and Recovery Machine "Chip Mover TG 4500"

Easy installation and maintenance! Flexible design tailored to your equipment is possible!

The "Chip Mover TG 4500" is a chip transport and collection machine that allows for flexible layouts tailored to the equipment environment and application. It is easy to install, and can be moved, extended, or expanded. Maintenance is also simple. It achieves chip transport and collection in a cost-effective and efficient manner. 【Features】 ■ Comprehensive automation ■ Low cost ■ High performance ■ Exceptional layout flexibility *For more details, please refer to the PDF document or feel free to contact us.

Company：ツカサ技研
Price：Other

Conveyor
Grinding Machine
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solvent recovery device "Take Series"

The design concept is low-cost and compact! It detaches with steam and collects as a liquid.

The "Take Series" is a solvent recovery device compatible with next-generation fluorinated solvents, specifically hydrofluoroolefins (HFOs). Based on a proven high recovery efficiency, it has been thoroughly compacted to achieve low cost and maintenance-free operation. Vapor is adsorbed onto activated carbon, then desorbed with steam and recovered as a liquid. 【Features】 ■ Design philosophy focuses on low cost and compactness ■ Maintenance-free ■ The solvent vapor suction system is a simple type ■ Can be easily installed without compromising the cleaning performance of manual cleaning machines ■ Compatible with next-generation fluorinated solvents, hydrofluoroolefins (HFOs) *For more details, please refer to the PDF document or feel free to contact us.

Company：TAKE-GEN 製造メーカー
Price：Other

Water treatment equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sludge recovery device M1-250M

Making the impossible possible!!! Trusted and proven for 30 years by major automobile manufacturers. Recovery of rare metals and grinding stones previously deemed unrecoverable is also possible!

This product can be used not only for cutting, grinding, and polishing processes but also for the treatment of processing fluids such as honing, electrical discharge machining, wire cutting, and the collection of floating substances and sludge from large tanks like underground tanks. By combining a diaphragm and a filter cloth (patented), it can collect various types of sludge and floating substances. With approximately 30 years of proven results, the collected materials include... grinding wheels, rare metals, magnesium, gold, silver, copper, titanium, cast materials, iron, aluminum, stainless steel, silicon, ceramics, glass, carbon, solidified substances, impurities from plating baths, impurities from anodizing baths, and various impurities from the semiconductor field using acids and alkaline liquids. (Note: Specifications will change regarding acids and alkalis.) The drive system uses only air, eliminating concerns about fire hazards. With our unique vacuum technology, suction and dehydration are top-class (sludge recovery M1). Additionally, since it operates solely on a diaphragm without using a motor, there is no worry about restart issues caused by air ingestion. Safety standards comply with international regulations.

Company：佐藤電装
Price：1 million yen-5 million yen

Other machine tools
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fully Automatic Trace Metal Contaminant Recovery Device 'NAC-316'

It has a fully automatic startup function for ICP-MS.

The "NAC-316" is a fully automated trace metal contaminant recovery device with bulk etching capabilities for Si wafers. Even beginners can obtain analytical results with ICP-MS. Additionally, it has two load ports, significantly improving work efficiency, and inline connection (OHT) is also possible. 【Features】 ■ Capable of recovering both hydrophilic wafers and hydrophobic wafers ■ Automatically performs bulk etching, recovery, and analysis on wafers set in the load port ■ Bulk etching is possible in two sizes: 200mm and 300mm ■ Bulk etching can also be performed in multiple layers on a single wafer, etc. *For more details, please download the PDF or contact us.

Company：NAS技研
Price：Other

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simple Micro-pollutant Recovery Device 'SC-3000'

It is a recovery device for hydrophobic wafers that can be easily used anywhere.

The SC-3000 is a simple device for recovering trace contaminants from hydrophobic wafer surfaces. It connects to a computer to create various recovery patterns and collects (samples) trace metal contamination from the surface and sides (bevel area) of silicon wafers. Additionally, it requires minimal external resources and occupies little space, making it easy to introduce the device. Please feel free to contact us if you have any inquiries. 【Features】 ■ Compatible with wafer sizes from 100mm to 300mm ■ Capable of recovering from the bevel area of hydrophobic wafers ■ Recovery possible from the center, donut area, outer perimeter, and entire surface set at radii r1 and r2 ■ Automatic supply of recovery liquid and suction of recovery liquid after sampling ■ Contaminated chips are automatically cleaned after suctioning the recovery liquid, etc. *For more details, please download the PDF or contact us.

Company：NAS技研
Price：Other

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simple Micro-pollutant Recovery Device 'SC-9000'

It is a recovery device for hydrophilic and hydrophobic wafers that can be easily used anywhere.

The SC-9000 is a simple type of trace contaminant recovery device that can recover contamination from hydrophilic wafers. It can also sample wafers made of materials other than silicon or wafers with rough surfaces due to bulk etching. 【Features】 - Restrictions on the state of the wafer and the type of sampling solution have been relaxed, allowing for the recovery of ions other than heavy metals. - Conventional hydrophobic surface sampling is also possible. - The device automatically supplies the sampling solution and moves the holding device, among other functions. *For more details, please download the PDF or contact us.

Company：NAS技研
Price：Other

Other environmental equipment
Recovery device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Recovery device Product List and Ranking from 178 Manufacturers, Suppliers and Companies | IPROS GMS

Recovery device Manufacturer, Suppliers and Company Rankings

Recovery device Product ranking