We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Resin(100) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jan 21, 2026～Feb 17, 2026
This ranking is based on the number of page views on our site.

Resin Product List

121～150 item / All 303 items

Displayed results
Newly Developed Product: Two-Component Room Temperature Curing Epoxy Resin TE-7170K

Newly Developed Product: Two-Component Room Temperature Curing Epoxy Resin TE-7170K

Room temperature curing × high thermal conductivity × flexibility! An epoxy resin suitable for stress relief. Low viscosity and good workability, equivalent to UL94 V-0.

The "TE-7170K" is a two-component, room temperature curing epoxy resin developed for heat dissipation insulation applications in electronic and electrical equipment. It cures at 25°C without the need for heating equipment, making it energy-efficient and easy to handle on-site. This product has a thermal conductivity of 0.9 W/m·K, making it effective for heat dissipation measures for heat-generating components. Additionally, the resin design incorporates flexibility to absorb and alleviate stress, helping to suppress the occurrence of cracks in substrates and components. It is suitable for applications that require high reliability. With a low viscosity design of 3,500 mPa·s (25°C), it excels in filling details and provides a sufficient working time of approximately 3 hours. 【Features】 ■ Two-component, room temperature curing epoxy resin (mixing ratio 100:20) ■ Effective for heat dissipation measures with a thermal conductivity of 0.9 W/m·K ■ Flexible design that effectively alleviates stress and prevents cracking ■ Good workability with low viscosity and approximately 3 hours of usable time *For more details, the product's specification sheet is available for download as a PDF from the link below, or please contact us. *Samples are also available, so please contact us if needed.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ideal for semiconductor manufacturing! Introducing heat-resistant specifications of 'CFRP'.

Ideal for semiconductor manufacturing! Introducing heat-resistant specifications of 'CFRP'.

Introducing "CFRP," which has heat resistance up to a maximum of 250℃ (for non-continuous use). There is also a low outgassing specification suitable for semiconductor-related applications.

In addition to the conventional room temperature specifications, we also offer a 250°C specification (non-continuous) to accommodate demanding processes. We can propose various grades according to the required heat resistance temperature. Furthermore, we have low outgassing specifications available for processes that require strict particle management, such as semiconductor manufacturing. Please feel free to contact us for more information.

  • fiber
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Unit Pure Water System "Daiya Pure"

Unit Pure Water System "Daiya Pure"

It is a cabinet storage type that integrates activated carbon filtration, reverse osmosis membrane (RO membrane), cartridge pure water purifier, and pure water pressure delivery unit. It has a compact design.

"Daiya Pure" incorporates the necessary components for a pure water system, including "activated carbon filtration," "reverse osmosis membrane (RO membrane)," "cartridge pure water unit," and "pure water pressure delivery unit" within a cabinet. "Daiya Pure" is a compact (RO) membrane-type pure water system designed with cost performance in mind. "Daiya Pure" produces high-grade pure water with minimal fine particles and organic substances. "Daiya Pure" features easy operation via a touch panel, which also manages and notifies users about water quality and leaks. The power supply for "Daiya Pure" is AC100V single-phase 50/60Hz. "Daiya Pure" is equipped with casters for easy mobility. *For more details, please refer to the PDF materials or feel free to contact us.*

  • Pure water production equipment
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Development] Two-Component Room Temperature Curing Epoxy Resin TE-7172K3

[New Development] Two-Component Room Temperature Curing Epoxy Resin TE-7172K3

Room temperature curing × High thermal conductivity 3.3W/mK × Flexibility! An epoxy resin suitable for stress relief. Ideal for gap filler applications, flame retardant equivalent to V-0.

The TE-7172K3 is a two-component, room-temperature curing epoxy resin developed for heat dissipation insulation applications in electronic and electrical equipment. It can cure at 25°C without the need for heating equipment, making it energy-efficient and adaptable to flexible production processes. Its most notable feature is its high thermal conductivity of 3.3 W/m·K, which is effective for heat dissipation measures for heat-generating components. Additionally, the resin design incorporates flexibility to absorb stress and prevent cracking in substrates and modules. The cured material exhibits balanced properties with a glass transition temperature of -20°C, a coefficient of linear expansion of 24 ppm/K, and a Shore D hardness of 45, combining heat resistance and flexibility. Moreover, it has flame retardant properties (equivalent to UL94 V-0 at 5mm thickness), making it safe for use in electronic devices that require safety. This improved version enhances heat resistance and toughness while inheriting the features of the conventional TE-7172K2. Applications include gap fillers, heat dissipation insulation materials, and encapsulation of electronic components where stress relief is required.

  • スクリーンショット 2025-08-08 110104.png
  • Other polymer materials
  • Other electronic parts
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DuPont's all-aromatic polyimide resin "Bespel" heat resistance temperature 288°C

DuPont's all-aromatic polyimide resin "Bespel" heat resistance temperature 288°C

Excellent heat resistance with a continuous use temperature of 288°C. Outgassing is also reduced. Material property table and price list are being distributed [Remote consultations are also available].

"Besper" is a DuPont manufactured fully aromatic polyimide resin that boasts exceptional heat resistance, capable of supporting high loads without softening even at high temperatures. In addition to "SP-1," which is made of 100% polyimide resin and excels in mechanical strength and electrical and thermal insulation properties, we offer a variety of grades that can be selected based on application needs, including sliding properties, static elimination performance, and dimensional stability under high loads. 【Features】 ■ Continuous use temperature is 288°C, intermittent use temperature is 480°C ■ Low outgassing, making it suitable for environments requiring high cleanliness, such as the semiconductor field ■ Prevents damage to transported items when used in transport rollers ■ "SP-1" can be used for insulation parts, insulating components, valves, glass substrates, lenses, bearings, transport suction nozzles, seal rings, and plasma-resistant parts. *We are currently publishing a property table that includes "SP-1" and "SCP-5000 (high strength and chemical resistance)," as well as a price list for "SP-1" and "SP-202 (static elimination grade)." You can view it via “PDF download.” Please feel free to contact us with any inquiries.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[G-Eco Series] Environmentally Friendly Water-Based Anti-Mold and Antibacterial Agent

[G-Eco Series] Environmentally Friendly Water-Based Anti-Mold and Antibacterial Agent

A mold growth prevention zone is formed around the area coated with anti-mold and antibacterial agents, achieving long-lasting anti-mold and antibacterial effects.

A mold and bacteria prevention agent is applied to form a barrier that inhibits mold growth, achieving long-lasting mold and bacteria prevention effects. Being a water-based agent, it has minimal odor, making it ideal for indoor applications. It can be used on wood, wallpaper, and even in food factories and restaurants. It features a dry finish that does not compromise the texture of the material. It is a safe and secure water-based mold and bacteria prevention agent for users and customers. 【Application Examples】 Long-term suppression of mold and bacteria growth on sukiya gates, wooden decks, wooden products, wood components, wallpaper, gypsum board, concrete, stone, tiles, clay walls, diatomaceous earth walls, plaster, exteriors, and porous materials. *For more details, please download the catalog or feel free to contact us.

  • Coating Agent
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cellulose Fiber Compounded Resin "GREEN CHIP CMF"

Cellulose Fiber Compounded Resin "GREEN CHIP CMF"

"The convenience of plastic and the eco-friendliness of biomass" biomass compound resin containing wood-derived cellulose that contributing to sustainability.

"The convenience of plastic and the eco-friendliness of biomass" - GREEN CHIP CMF is a biomass compound resin contains wood-derived cellulose fiber, contributing to sustainability - Our GREEN CHIP CMF contains 55% wood-derived cellulose fiber, significantly reducing the use of petroleum-derived plastics - When using GREEN CHIP CMF, which contains 55% cellulose fiber, the amount of total CO2 emissions, from manufacturing to incineration, can potentially be reduced by approximately 20%*1 compared to petroleum-derived resins. *1: By our own calculations based on the Ministry of the Environment's "Guidelines for the Utilization and Application of Cellulose Nanofiber Towards the Decarbonization and Achievement of a Circular Economy" - GREEN CHIP CMF has obtained the Biomass Mark in Japan and TUV AUSTRIA OK biobased certification in Europe - No need to replace currently used molds. Moldability is the same level as conventional resin. - Tensile strength, flexural strength, flexural modulus and heat resistance (load deflection temperature) are improved compared with unreinforced polypropylene resin (PP resin), so it is possible to make molded products thinner - Recyclable: Materials with low attenuation (damping) rate of properties compared to glass fiber compounds - Cellulose fibers can be blended with resins other than polypropylene resin

  • 箸.jpg
  • マグ６.jpg
  • バイオマスマーク.JPG
  • Composite Materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ion exchange resin [Low-cost for special applications such as pure water and precious metal recovery!]

Ion exchange resin [Low-cost for special applications such as pure water and precious metal recovery!]

Mizu no Kotobuki responds to customer requests with processing and development of ion exchange resins in collaboration with India's THERMAX company!

We handle ion exchange resins and synthetic adsorbents from Thermax, India. Ion exchange resins, chelating resins, and synthetic adsorbents are available for a wide range of applications, including NSF-certified products for various water purifiers, ultrapure water for electrical discharge machining, recovery of valuable materials such as precious metals, recycling, solvent purification, and removal of harmful gases. 【List of Special Processed Products】 ■ Ion exchange ■ Particle size adjustment ■ Drying ■ Crushing ■ Ultrapure water washing ■ Chemical impregnation ■ Special mixing 【List of Developed Products】 ■ Adjustment of resin crosslinking degree ■ Functional group addition ■ Large particle size products ■ Adjustment of specific surface area and most frequent radius of synthetic adsorbents *For more details, please download the PDF or contact us.

  • イオン交換樹脂用途.png
  • イオン交換樹脂?.png
  • Water treatment equipment
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin, plastic machining (Heli-Coil insertion)

Resin, plastic machining (Heli-Coil insertion)

Shortest half-day estimate / We can also handle resin cutting products from one piece for prototype projects in plastic and engineering plastics, etc.

Our company specializes in machining parts made of materials such as iron, aluminum, and SUS, but we also receive many orders for cutting processing of engineering plastics and other resins. We can handle both lathe and milling processing, accommodating a wide range of dimensions and processing content from approximately 10mm to 300mm plates. Additionally, Helicoils, which create strong stainless steel inserts by being inserted into soft materials like plastics, are ideal for areas that require strong tightening and durability for repeated use. We can handle the insertion as well. ◎ About the length of Helicoils Example) When inserting an M6 Helicoil into plates of 8, 10, 12, or 20mm - Are Helicoils of the above lengths available? - What length should the Helicoil be? For M6, the lengths are 6, 9, and 12mm, with lengths of 1D, 1.5D, and 2D. Please note that you cannot freely choose from these options. For our machining parts achievements, please refer to "Catalog of 100 Machined Parts." From metals to resins, leave the cutting processing of prototype and development parts to us!

  • Other machine elements
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
General-purpose resin for cutting: Acrylonitrile Butadiene Styrene (ABS)

General-purpose resin for cutting: Acrylonitrile Butadiene Styrene (ABS)

It is a general-purpose plastic with excellent surface strength and thermoplastic properties.♪

It is an amorphous resin that excels in surface strength and impact resistance compared to other general-purpose plastics. Additionally, it has good adhesive properties and is easy to process further.

  • Piping Materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NAC general-purpose cutting resin "Polypropylene (PP)"

NAC general-purpose cutting resin "Polypropylene (PP)"

It is a general-purpose thermoplastic with higher strength than PE (polyethylene)♪

It has corrosion resistance and insulation properties above PE, as well as abrasion resistance, wear resistance, and chemical resistance. It is a lightweight resin that is easy to handle.

  • Piping Materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rigid urethane <dimensions>

Rigid urethane <dimensions>

In molding with silicone rubber molds, a dimensional tolerance of ±1.0mm is required for dimensions up to 50mm!

Here is an introduction to the dimensions of "hard polyurethane." For molding with silicone rubber molds, the dimensional tolerances required are as follows: ±1.0mm for up to 50mm, ±1.5mm for 51 to 200mm, ±2.5mm for 201 to 600mm, and ±3.0mm or more for 601 to 1000mm. Please feel free to contact us if you have any requests. 【Required Dimensional Tolerances】 ■ Up to 50mm: ±1.0mm ■ 51 to 200mm: ±1.5mm ■ 201 to 600mm: ±2.5mm ■ 601 to 1000mm: ±3.0mm or more *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluororesin (FEP) thin heat shrink tube / TKF-310 series

Fluororesin (FEP) thin heat shrink tube / TKF-310 series

Compatible with different specifications, heat shrink tube made of FEP resin with a large shrinkage rate.

This is a fine and thin FEP shrink tube. It can be shrunk at lower temperatures than PTFE/PFA. By applying heat to shrink it, the tube adheres to the substrate, imparting unique properties of fluororesins such as heat resistance, chemical resistance, and loweat friction to the surface of the substrate. Additionally, due to our unique manufacturing technology, we have expanded the coating range compared to conventional products, making it possible to coat items of different diameters.

  • Other polymer materials
  • Engineering Plastics
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Biomass Acrylic Polyol '6BX-010'

Biomass Acrylic Polyol '6BX-010'

It is a polyol that can incorporate biomass components into coating agents.

【 POINT 1 !! 】 Acrylic polyol with approximately 48% biomass content can be used as a binder resin for various coatings, offering a wide range of applications and the potential for reduced environmental impact. 【 POINT 2 !! 】 It has good compatibility with isocyanate prepolymers, allowing for improved film properties. 【 POINT 3 !! 】 With low viscosity, it has a minimal impact on the viscosity of coating materials, enabling improvements in high solid content and reducing solvents.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cutting processing material: PE-UHMW resin

Cutting processing material: PE-UHMW resin

Ultra-high molecular weight polyethylene with a molecular weight exceeding 10 million! It has excellent wear resistance.

We would like to introduce the cutting processing material we handle, "PE-UHMW resin." It is ultra-high molecular weight polyethylene with a molecular weight exceeding 10 million. It has a friction coefficient of 0.08, providing extremely high wear resistance. Additionally, it can be used in processes where food comes into direct contact. Please feel free to contact us if you have any requests. 【TECAFINE PE 10 BH Features】 ■ Molecular weight of 10.2 million ■ Very low friction coefficient of 0.08 (PTFE: 0.07) ■ Extremely excellent wear resistance ■ Complies with Ministry of Health and Welfare Notification No. 370 ■ Can be used in processes where food comes into direct contact ■ Melting point is approximately 135°C, with a maximum operating temperature of 130°C *For more details, please refer to the related links or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UV-curable resin, flexible type TRU-0202

UV-curable resin, flexible type TRU-0202

It is a radical-type UV-curable resin. It has been given anaerobic and heat-curing properties. It is flexible and effective in preventing cracks.

TRU-0202 Radical-type UV-curable resin Features: Flexibility, heat resistance, moisture resistance, anaerobic curing, heat curing Applications: Protection of small motors and sensors *Anaerobic curing is applicable only when the substrate is metal 【Specifications (excerpt)】 ■Viscosity: 25℃ 8,000 (mPa·s) ■Glass transition temperature: -30℃ ■Shear adhesive strength: 11.0 (MPa) AL/AL 25℃ 11.0 (MPa) 85℃/85℃RH after 1000h ■Recommended curing conditions: UV metal halide lamp 3,000mJ/cm² or 80℃ x 2h / Anaerobic curing

  • Other polymer materials
  • Coating Agent
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Foam polyurethane insulation material

Foam polyurethane insulation material

Manufacturing of insulation materials using batch production methods.

It is an insulation material made of polyurethane produced using a batch production method with a flat panel molding machine.

  • kojyo_uretan02.jpg
  • Extrusion Machine
  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safety measures for factories and logistics warehouses: Guardrails SM/LM MPM resin

Safety measures for factories and logistics warehouses: Guardrails SM/LM MPM resin

Shock-absorbing resin guardrails that prevent impacts from delivery lifts. They protect workers and important equipment from contact and collisions with forklifts, pallet trucks, and other vehicles.

This product is a 2-bar type guardrail suitable for ensuring safety through the separation of pedestrian and vehicle pathways. Due to its lower height, it can also be used in areas where complete separation is difficult. It can be connected, allowing for various layouts and applications. It protects workers and products from contact and collisions with forklifts, hand forks, pallet trucks, and more. 【Features】 ■ Prevents impacts from transport lifts ■ Suitable for ensuring safety through the separation of pedestrian and vehicle pathways ■ 2-bar type ■ Can be connected ■ Compatible with various layouts and applications *For more details, please refer to the PDF document or feel free to contact us. *If you contact us through our website, we will be happy to discuss the details with you.

  • Cushioning material
  • Other safety and hygiene products
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to Industrial Plastic Processed Products - Solar Cell Manufacturing Equipment Parts

Introduction to Industrial Plastic Processed Products - Solar Cell Manufacturing Equipment Parts

Achieving uniform film formation with low water absorption rate!

To eliminate unevenness during film formation on the substrate, a low water absorption super engineering plastic "Sumika Super S1000" has been adopted. ■ Example of use: Carrier parts of CVD equipment ■ Material: Sumika Super S1000 ■ Processing: Mechanical cutting processing ■ Reason for adoption: Low water absorption, prevention of chipping and damage to the carrier.

  • Engineering Plastics
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Long-lasting, high-performance fluororesin (PTFE) packing <<Omni-Seal>>

Long-lasting, high-performance fluororesin (PTFE) packing <<Omni-Seal>>

Fluororesin (PTFE) seals that meet harsh demands from high temperatures to extreme low temperatures, from ultra-high pressure to high vacuum! They contribute to increased productivity due to their long lifespan.

OmniSeal is a high-performance sealing solution from SAINT-GOBAIN PERFORMANCE PLASTICS that combines PTFE and corrosion-resistant metal springs. Originally developed as a seal for rocket fuel systems, OmniSeal is now widely used in medical devices, analytical instruments, and food machinery, as well as in general industrial applications such as oil and pneumatic equipment, pumps, and valves. 【Features】 ■ Resistant to almost all chemicals (acids, alkalis, organic solvents, etc.) ■ Usable from -250°C in extreme low temperatures to 300°C in high temperatures ■ Usable from ultra-high vacuum of 10^-8 Pa to ultra-high pressure of 200 MPa ■ Suitable for both dynamic and static applications, with low friction and long lifespan for dynamic use ■ Small cross-sectional dimensions require less installation space *For more details, please contact us or download the catalog.

  • Other machine elements
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super hard blade scraping rod

Super hard blade scraping rod

Due to the use of ultra-hard blades, it is resistant to impact and has a long lifespan! The double-sided blade improves work efficiency and increases productivity.

We offer a "Tungsten Carbide Blade Scraper" that can be used for removal tasks such as spatters, sludge, and burrs. You can choose from three different sizes, including "KN-25E," "KN-50E," and "KN-80E," based on your application. Since it can be struck from the back with a hammer, it reduces the burden on the user. Additionally, we also provide "CP-1000/700/350" and "CB-50E/80E," which can be used by combining three types of pipes and two types of tungsten carbide blades. 【Features】 ■ Easy-to-use tungsten carbide alloy blade tip, double-edged ■ Made with impact-resistant tungsten carbide alloy ■ Double-sided blade improves workability and efficiency *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Masking UV Resin Vi MASK (Liquid Type)

Masking UV Resin Vi MASK (Liquid Type)

Instant curing with UV irradiation. Protects the target areas from blasting, acids, alkalis, and paints. There are various methods for removal.

This is a liquid-type masking resin that cures under UV irradiation. It is resistant to various substances such as sandblasting, high-temperature acids and alkalis, plating, and painting, protecting the target areas. Application methods: Syringe, brush, dip, spray, etc. Removal methods: Peel-off type, water-soluble type, type that can be peeled off when heated to 50-80°C, incinerable type.

  • マスキング2.jpg
  • マスキング3.jpg
  • Plasma surface treatment equipment
  • Other surface treatment equipment
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Saxin New Light Super Series NL-Super Tough CL

Saxin New Light Super Series NL-Super Tough CL

About 7 times wear resistance of monomer cast nylon sliding grade!!

The Super Series "NL-Super Tough CL" has wear resistance characteristics that are 1.5 times that of our standard product (NL-W), about 7 times that of monomer cast nylon sliding grades, and approximately 15 times that of polytetrafluoroethylene (PTFE). Examples of reference applications include conveyor guide rails, paper-making components, various lining materials, and various sliding components. The sizes that can be produced range from 8 to 50 x 1000 x 2000. 【Features】 ■ Wear resistance ■ 1.5 times that of our standard product (NL-W) ■ About 7 times that of monomer cast nylon sliding grades ■ Approximately 15 times that of polytetrafluoroethylene (PTFE) ■ Available sizes: 8 to 50 x 1000 x 2000 *For more details, please contact us or refer to the catalog.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heating and Pressurizing Automatic Embedding Machine "Simple Met 4000"

Heating and Pressurizing Automatic Embedding Machine "Simple Met 4000"

Introducing a heating and pressure automatic embedding machine with high durability that can accommodate two units even in a small space!

The "Simple Met 4000" is a heating and pressurizing automatic embedding machine with dimensions W311×D662×H498mm (524mm when the door is open). The noise level reaches a maximum of 62db at a distance of 1 meter from the front of the machine during the up and down movement of the ram associated with the opening of the mold closure. Please feel free to contact us if you have any inquiries. 【Features】 ■ Increased productivity (high durability) ■ Time reduction (short embedding cycle) ■ Space-saving (can accommodate two units in a narrow space) ■ Comes with mold assembly *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Suitable for precision machining, heat-resistant resin, Sumika Super S1000.

Suitable for precision machining, heat-resistant resin, Sumika Super S1000.

Super engineering plastic with excellent heat resistance and dimensional stability.

The Sumika Super (formerly Econol) S1000 series is a fully aromatic polyester resin with excellent heat resistance, capable of withstanding temperatures up to 400°C without melting or deforming, and a continuous use temperature of 260°C. It has low cutting resistance and minimal melting due to heat generation, making it a suitable material for precision machining.

  • Engineering Plastics
  • plastic
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Embedding resin for inspection "Technovit 8100"

Embedding resin for inspection "Technovit 8100"

Suitable for observation of samples using optical microscopy, a HEMA-based resin for enzymatic chemistry and immunology!

"Technovit 8100" is a resin based on HEMA suitable for observation of samples using optical microscopy. If the specimens are demineralized iliac crests or implanted biomaterials, they can be used not only for histological purposes but also for enzymology and immunology applications. It is suitable for specimen observation in histology, zoology, botany, enzymology, and immunology. 【Features】 ■ Based on HEMA suitable for observation using optical microscopy ■ Particularly suitable for specimen observation in histology, zoology, botany, enzymology, and immunology ■ Composed of nearly odorless plasticizers and hydrophilic resins ■ Especially suitable for cold curing (4 °C) ■ Service life is approximately 2 years *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermosetting Dry Molding Material "Bioglass Technical Data"

Thermosetting Dry Molding Material "Bioglass Technical Data"

Thermosetting dry molding materials suitable for applications such as electrical equipment, electronic components, automotive electrical parts, and heat-resistant parts that require high reliability!

"Viroglass" is a thermosetting dry molding material made from crystalline unsaturated polyester resin, possessing excellent properties such as electrical insulation, flame resistance, and heat resistance. Compared to BMC molding materials, Viroglass excels in handling, moldability, and storage stability. Additionally, we provide an easy-to-understand presentation of Viroglass's performance, including graphs of bending characteristics after heat resistance tests and strength characteristics after heat cycle tests, as technical documentation. 【Features】 ■ Excellent properties of electrical insulation, flame resistance, and heat resistance ■ Heat-resistant grade, flame-retardant grade, high-strength grade, heat dissipation grade ■ Applications in electrical equipment, electronic components, automotive electrical parts, heat-resistant parts, and more *For more details, please request documentation or view the PDF data available for download.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High pressure-resistant high adhesion repair material / M754REP-210KG

High pressure-resistant high adhesion repair material / M754REP-210KG

High pressure-resistant high adhesion repair material (suitable for drinking water pipes and tanks) / Model number M754REP-210KG

For bonding and repairing all types of metals and resins, it boasts an impressive high pressure: 210 kg/cm² strong adhesion, with a pressure resistance of 3000 psi (varies depending on repair use). ● It can effectively bond various metals, including aluminum, and rigid plastics. ● The repaired and sealed areas will last for a long time. ● It also has excellent chemical resistance, with a heat resistance range of -40 to 176°C (continuous use at 148°C).

  • Repair Agent
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Resin

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.