Resin(100) - List of Manufacturers, Suppliers, Companies and Products

Large waste collection container "Sunclean Box #800"

A large dustbin in the 800-liter class with a simple design that has few protrusions.

The "Sankurin Box #800" is a temporary storage dust box for both indoor and outdoor use. Its exterior design features a simple shape with minimal protrusions, making it difficult for trash and dust to accumulate, and it is easy to clean, ensuring high hygiene standards. All major components are made of plastic, preventing rust and maintaining cleanliness over time. The material used is ultra-high molecular weight polyethylene, which is excellent in weather resistance, impact resistance, and cold resistance, and is recyclable. It can hold up to 18 household 45-liter garbage bags. 【Features】 - A stopper is installed to allow safe operation when opening the lid. - The two-door system with a rotating door and a front door ensures a wide opening. - Trash collection and cleaning of the main body can be done easily. - It is difficult for trash and dust to remain, making it easy to clean and very hygienic. - Can hold up to 18 household 45-liter garbage bags. *For more details, please feel free to contact us.

Company：三甲物流ソリューションサービス
Price：Other

Other safety and hygiene products
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic Knowledge of Thermal Conductivity Thermal Conductivity Table Rigid Polyurethane, etc.

We will introduce the basic knowledge of thermal conductivity, starting with the characteristics of our materials!

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with thermal conductivity increasing in the order of "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mk (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mk) *For more details, please refer to the PDF document or feel free to contact us.

Company：多田プラスチック工業
Price：Other

Other Auto Parts
Composite Materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding SPS engineering plastics for automotive parts and medical devices.

Excellent hydrolysis resistance and chemical resistance! Can be used for connectors and engine control components.

HEVs require handling high currents and high voltages due to the use of high-output motors. Therefore, materials for connectors and terminals must have heat resistance and electrical reliability (high dielectric strength and tracking resistance). "SPS (engineering plastic)" has excellent electrical properties because it does not have polar groups, making it suitable for electrical and electronic components used in HEVs. 【Features】 ■ Low specific gravity (lower than other engineering plastics) ■ Heat resistance (high load deflection temperature 250°C, low load deflection temperature 268°C) ■ Hydrolysis resistance ■ Chemical resistance (acid resistance, alkali resistance, oil resistance, aliphatic solvent resistance) ■ Electrical properties (extremely low dielectric loss, good tracking resistance) *For more details, please refer to the PDF document or feel free to contact us.

Company：多田プラスチック工業
Price：Other

plastic
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic knowledge of rigid polyurethane: Cyclopentane, water resistance (polyether type)

Explanation of the differences between polyether-based and polyester-based materials! Introduction to the basics of rigid polyurethane.

I will introduce the differences between polyether-based and polyester-based materials. The molecular structures of polyester-based urethane and polyether-based urethane are different. Polyether-based urethane contains -O- within its bonding molecules, and in principle, this molecular structure is not affected by H2O (water). In other words, it is a material that is strong against water. An example of this is its use in bathtub covers. On the other hand, polyester-based urethane contains -COO- within its bonding molecules, and this molecular structure tends to react with H2O (water) and decompose into -COOH (acid) and -OH (alcohol). Therefore, polyester-based urethane is generally said to have inferior water resistance. *There are also polyester-based materials with high water resistance. *For more details, please refer to the PDF materials or feel free to contact us.

Company：多田プラスチック工業
Price：Other

plastic
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Synthetic Resin Field] Liquid Urethane Resin 'Efrethan'

Low viscosity liquid! We respond to a wide range of applications from high-performance types to environmentally friendly types.

"Efretan" is a two-component reaction-type fast-curing, solvent-free, low-viscosity liquid urethane resin. It possesses a well-balanced performance required for coating resins and is highly anticipated in a wide range of fields, from civil engineering and construction to home appliances and artistic modeling, as a resource-saving and pollution-free coating material. 【Features】 ■ Cures extremely quickly at room temperature after two-component mixing ■ 100% resin, solvent-free, and environmentally friendly ■ Low-viscosity liquid that can be coated without dilution during use ■ Strong coating film with excellent elasticity and impact resistance unique to urethane ■ Good leveling properties, resulting in a smooth, glossy coating film *For more details, please refer to the PDF document or feel free to contact us.

Company：MCCトレーディング
Price：Other

Processing Contract
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Graphene heat dissipation resin (graphene pellets)

The applications for heat-curing resins, three-dimensional heat dissipation materials, and thermal management resins are expanding.

We would like to introduce a thermosetting molding resin material that can "dissipate heat" while being a resin by adding graphite. We have four types of graphene phenolic resin materials available. Regarding molded products, we can assist you from consultation, material selection, drawing review, mold production, prototype creation, to mass production, so please feel free to contact us. Additionally, the manufacturing of these molded products will be handled by our "overseas partner company."

Company：緑マーク
Price：Other

Composite Materials
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic knowledge of thermal conduction, thermal conductivity table, rigid polyurethane, etc.

Thermal conductivity is the amount of heat that flows through an area of 1 m² in one second when there is a temperature difference of 1°C across a thickness of 1 m.

Thermal conductivity refers to the measure of how easily heat is conducted. High thermal conductivity → Heat is easily transmitted Low thermal conductivity → Heat is not easily transmitted Liquids conduct heat better than gases, and solids conduct heat better than liquids, with the order of thermal conductivity being "gas < liquid < solid." Metals have high thermal conductivity, while materials like polyurethane foam have low thermal conductivity, which is even lower than that of air. [Features of Our Materials] ■ Uses high-performance polyurethane (cyclopentane material) with excellent insulation and environmental properties ■ Thermal conductivity: 0.021 W/mK (initial value) ■ Approximately 30% higher performance compared to typical expanded PS (0.034 W/mK) *For more details, please refer to the PDF document or feel free to contact us.

Company：多田プラスチック工業
Price：Other

Injection Molding Machine
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

無溶剤透明吹き付け防滑樹脂『ESGスプレー』

吹き付け工法による独自技術！点接着、半艶仕上げで施工後も目立たず自然な仕上り

『ESGスプレー』は、素早く広範囲を防滑にできる吹き付け工法による透明防滑樹脂です。硬化も早く施工後30分程度で歩行可能となります。施工表面は点接着となり、下地の通気性はそのまま維持。水の影響を受けやすい場所でも効率的に施工ができるようになりました。【特長】 ■ローラー塗りと比べ施工範囲は5～10倍 ■半艶で既存下地の状態に近い自然な仕上りを実現 ■そのまま重ね塗りが可能 ■有害物質を含まない環境材料 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

Company：アルテック
Price：Other

Other consumables
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heparin HyperD M

Affinity chromatography resin that provides high binding capacity at high flow rates.

Heparin HyperD M resin is a technically advanced, high-speed, large-capacity affinity chromatography resin suitable for the purification of biomolecules that bind to heparin, such as coagulation factors, growth factors, and lipoproteins. The unique composite structure of Heparin HyperD M has been designed to provide excellent dynamic capacity at high linear fluid velocities. HyperD resin consists of porous, rigid mineral beads containing heparin bound to the hydrogel filling pores. Heparin HyperD M has an average particle size of 80 μm and is used in the purification of ATIII at scale. The resin can be packed into columns of various sizes, from milliliters to over 100 liters, and operates at low back pressure and high flow rates.

Company：Sartorius Stedim Japan K.K.
Price：Other

others
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Self-hardening furan resin "Xfuran"

Self-hardening phenolic resin with high initial strength.

"Xfuran" is a self-hardening furan resin binder developed by our company. The history of the furan resin process in the Japanese casting industry is the very history of "Xfuran," and the technology we have accumulated over many years can certainly meet your trust. Please feel free to contact us if you have any requests. 【Features】 ■ High initial strength can be obtained ■ Molding is easy, and molding labor can be reduced ■ The dimensional accuracy of the sand mold is excellent, improving the accuracy of the castings ■ Environmentally friendly with low gas emissions during casting ■ Easy sand removal after pouring ■ Over 95% sand recovery is possible ■ The mixed sand has excellent fluidity *For more details, please download the PDF or feel free to contact us.

Company：神戸理化学工業
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-quality recycled PEEK resin "PKR Series"

It is suitable for parts used in harsh environments such as gears, screws, bearings, and tie wraps!

We would like to introduce the high-quality recycled PEEK resin "PKR Series" handled by Kotec Co., Ltd. This product is PEEK resin that has been recycled using Kotec's unique technology. It can be used for parts such as gears, screws, bearings, and cable ties that are used in harsh environments. We have newly added three non-reinforced grades: "PKR-10," "PKR-20," and "PKR-30," as well as a GF 30% reinforced grade "PKR-30G30." 【Features】 ■ PEEK resin recycled using our unique technology ■ Suitable for parts used in harsh environments ■ Four types: "PKR-10," "PKR-20," "PKR-30," and "PKR-30G30" *For more details, please refer to the PDF document or feel free to contact us.

Company：コテック
Price：Other

Other polymer materials
Composite Materials
Other metal materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Room temperature curing epoxy resin 'TERADITE TE-7172K4'

Flame retardant UL94 equivalent to V-2 at 3mm! The main component is epoxy resin, and the hardener is amine.

"TERADITE TE-7172K4" is a two-component, room temperature curing epoxy resin. It has a high thermal conductivity resin (3W/m·K) and is flame retardant equivalent to UL94 3mm V-2. It is a flexible resin that improves upon the flexibility of TE-7172K3. It can be used as an insulating material for heat dissipation in electronic and electrical devices where stress relaxation is required, as well as for gap fillers. 【Cured Material Properties (Partial)】 ■Appearance (Visual): Gray solid ■Specific Gravity (25°C): 3.06 ■Curing Shrinkage Rate (25°C): 0.2% ■Hardness (25°C): 20 Shore D (70 Shore A) ■Glass Transition Temperature (Cooling): -48°C *For more details, please download the PDF or feel free to contact us.

Company：寺田
Price：Other

Other consumables
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ephretan

Durable coating with a smooth finish! Quick curing while maintaining good leveling properties.

"Efretan" is a two-component reaction-type fast-curing, solvent-free, low-viscosity liquid urethane resin. It possesses a well-balanced performance required for coating resins and is highly anticipated across a wide range of fields, from civil engineering and construction to home appliances and artistic modeling, as a resource-saving and environmentally friendly coating material. The coating film exhibits excellent elasticity unique to urethane and demonstrates strong properties with outstanding impact resistance. Additionally, it excels in flexibility and chemical resistance, expanding its range of applications. 【Features】 ■ Cures extremely quickly at room temperature after two-component mixing ■ 100% resin, solvent-free, and environmentally friendly ■ Low-viscosity liquid allows for coating without dilution during use ■ Tough coating film with excellent elasticity and impact resistance unique to urethane ■ Good leveling properties, resulting in a smooth, glossy coating film *For more details, please refer to the PDF document or feel free to contact us.

Company：IMCDジャパン
Price：Other

Coating Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PARQIT High hardness, stain resistance, water and oil repellent type

High hardness, stain resistance, water-repellent and oil-repellent resin.

PARQIT is a true light-curing resin that starts curing solely with light and fully cures only with light. Among its features, it has a very high hardness and possesses dirt resistance, water repellency, and oil repellency. It is used for hard coatings, anti-fouling coatings, and water/oil repellent coatings, and it also enables the hardening of fine structures transferred using the imprint method. *This resin is a joint development product with Tokyo University of Science.* *For more details, please download the catalog or contact us.*

Company：オーテックス
Price：Other

plastic
glue
Optical Experimental Parts
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Molding and Processing: Miorex PMX-573(S)

Outstanding cost performance and safety without the use of asbestos.

The Miolex series is a product that combines excellent thermal insulation, mechanical strength, outstanding dimensional stability, exceptional cost performance, safety without the use of asbestos, electrical insulation, and machinability. 【PMX-573(S) (Basic Grade)】 Heat resistance temperature (°C): 250 Compression creep (％): 0.71 Bending strength (MPa): 100–150 Compression strength (MPa): 150–200 Impact strength (J/cm): 1.5 Thermal expansion rate (1/°C): 6.6×10^(-8) Thermal conductivity (W): 0.3 Volume resistivity (Ω-cm): FW,★1=10^12, FW,★2=10^7 Water absorption rate: 2.0–5.0 Specific gravity: 2.0–2.2 At our company, we perform precision machining of PMX-573(S) using numerous machine tools in a temperature-controlled environment managed 24 hours a day. *For more details, please refer to the PDF document or feel free to contact us.

Company：三田電気工業
Price：Other

Composite Materials
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[New Development] Two-component Room Temperature Curing Epoxy Resin TE-6408FRK

Room temperature curing × high transparency × flame retardant equivalent to V-0 epoxy resin. Flexibility enhancement to suppress cracking! A new proposal for room temperature curing epoxy.

"TE-6408FRK" is a room temperature curing two-component epoxy resin, suitable for coating and adhesive applications. It can cure at 25°C, eliminating the need for heating equipment, allowing for energy-efficient and effective work. A major feature of this product is its flexible cured material. It demonstrates over 90% transparency (420-600nm transmission), making it suitable for applications that require high aesthetic quality. Additionally, it possesses flame retardancy (equivalent to UL94 V-0 at 5mm thickness), contributing to safety assurance. It can be widely used for coating electronic components, bonding plastics and metals, and clear applications that require aesthetic appeal. [Features] - Two-component room temperature curing epoxy resin (mixing ratio 100:30) - Flexible cured material (tensile elongation of 230%, crack prevention effect) - High transparency (over 90% transmission at 420-600nm) - Low viscosity and good workability *For more details, the product specification sheet is available for download as a PDF from the link below, or please contact us. *Samples are also available, so please reach out if you need them.

Company：寺田
Price：Other

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HyperCel STAR AX Ion Exchange Resin

Advanced salt-resistant anion exchange chromatography resin boasting excellent recovery capability.

HyperCel STAR AX is a salt-tolerant anion exchange resin designed for bioprocessing. ■ High DBC (dynamic binding capacity) with a short residence time (less than 2 minutes) ■ Direct capture of proteins or removal of impurities from undiluted feedstock at moderate to high conductivity ■ Excellent selectivity across a wide range of conductivity ■ Rapid processing, improved economic efficiency of the process

Company：Sartorius Stedim Japan K.K.
Price：Other

others
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FluoroClear Pleats All Fluoropolymer GFL Series

Provides a wide range of chemical compatibility and heat resistance! Can be disinfected using compatible chemical agents!

The "GFL Series" is a high-purity FluoroClear filter cartridge designed for highly corrosive wet etching and cleaning applications in the microelectronics industry. Constructed from 100% fluoropolymer materials, the ECTFE hardware and support layer provide a wide range of chemical compatibility and thermal resistance. The PTFE membrane delivers high flow rates and high-purity effluent with low pressure loss. The cartridge can be supplied in a wet pack with hydrogen peroxide preservative in cleaned and dried products or high-purity deionized water. 【Features】 ■ Manufactured in a cleanroom environment to ensure product cleanliness ■ Can be disinfected using compatible chemical agents ■ All components meet the biological safety specifications of plastic USP Class VI -121℃ ■ Compliant with FDA regulations for food and beverage contact use *For more details, please refer to the PDF materials or feel free to contact us.

Company：日本フィルトレーショングループ
Price：Other

filter
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Concrete Structure Pressurized Injection Water Stop System "Vandex Flexin"

A system method that integrates injection materials, injection machines, and construction methods!

The "Vandex Flexin" method is a technique that uses a machine to inject a very low-viscosity acrylic-based two-component synthetic resin into the leaking parts of concrete under high pressure. A hole is drilled at an angle of approximately 45 degrees into the leaking area of the concrete, and using a special nozzle, a hydrophilic injection material can be continuously pressed in at a specified amount, allowing it to fill the entire gap. The injected material becomes a highly elastic resin, demonstrating top-level water-stopping effectiveness. 【Features】 ■ The injected polymer is a durable and elastic hydrophilic high-elasticity resin. ■ The resin can absorb water and expand in volume under wet conditions. ■ The gel time, injection pressure, and injection duration of the injection material can be freely controlled. ■ A method capable of addressing various leakage phenomena. *For more details, please download the PDF or feel free to contact us.

Company：日本バンデックス本社・東日本営業所
Price：Other

others
Resin

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Two-component reaction-type liquid urethane resin "Efrethan"

[Attention companies with instant curing two-component mixing spray systems] We cater to a wide range of applications, from high-performance types to environmentally friendly types!

"Efretan" is a two-component reaction-type fast-curing, solvent-free, low-viscosity liquid urethane resin. It possesses a well-balanced performance required for coating resins and is highly anticipated across a wide range of fields, from civil engineering and construction to home appliances and fine arts, as a resource-saving and environmentally friendly coating material. There are various advantages in terms of improving the working environment and workability on-site, as well as increasing production efficiency in factory painting. [Features] - Cures extremely quickly at room temperature after two-component mixing. - 100% resin, solvent-free, and environmentally friendly. - Low viscosity liquid that can be coated without dilution during use. - Strong coating film with excellent elasticity and impact resistance unique to urethane. - Good leveling properties, resulting in a smooth, glossy coating film. *An instant curing two-component mixing spray system is required. *For more details, please download the PDF or feel free to contact us.

Company：MCCトレーディング
Price：Other

Chemicals
Composite Materials
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【スプレーシステムがなくても安心】液状ウレタン樹脂『エフレタン』

≪協力企業様をご紹介≫瞬間硬化性2液混合スプレーシステムがなくてもOK！2液反応型の速硬化・無溶剤・低粘度液状ウレタン樹脂！

『エフレタン』は2液反応型の速硬化・無溶剤・低粘度液状ウレタン樹脂です。エフレタンの使用は、瞬間硬化性2液混合スプレーシステムが必要となりますが、協力企業様をご紹介をさせていただきますので、「設備投資はできないが、エフレタンを使いたい！」という貴社のお悩みをサポート！『エフレタン』はコーティング樹脂に要求される性能をバランスよく備え、省資源・無公害型コーティング材として土木・建築・家電から美術造形にいたるまで幅広い分野から大きな期待がよせられています。【特長】 ■2液混合コーティング後、常温において極めて速く硬化 ■100％樹脂、無溶剤でエコロジー性を備える ■低粘度液状で、使用時希釈することなくコーティング可能 ■ウレタン特有の弾力性、耐衝撃性に優れた強靭な塗膜 ■レベリング性が良好、滑らかな光沢のある塗膜 ※詳しくはPDFをダウンロードして頂くか、お気軽にお問い合わせ下さい。

Company：MCCトレーディング
Price：Other

Coating Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super soft transparent resin 'Human Skin Gel Concentrate Transparent' for creating medical models and more.

Outstanding bubble release! Incredible softness! A transparent type of ultra-soft molding resin that has a softness akin to human skin has arrived!

This is a transparent ultra-soft urethane resin that expresses the softness similar to human skin. It is ideal as a material for medical palpation models and original figures. There are two types available: hardness 0 (soft) and hardness 7 (normal). **Key Points of Human Skin Gel Concentrate (Transparent)** - **Incredible Softness!** This urethane resin has a softness that was nearly impossible to achieve at the user level until now. - **Excellent Bubble Release and Transparency!** Bubbles are easily released even with manual stirring, allowing for the molding of a highly transparent soft resin. There is no need for a vacuum degasser. - **Cures at Room Temperature!** It cures in 24 hours at room temperature (above 20°C). You can create it without an oven or similar equipment. - **Self-Adhesive Properties** The cured human skin gel has self-adhesive properties. If adhesion is a concern, please use a separately sold surface coating agent. *For more details, feel free to contact us.*

Company：EXSEAL CO., LTD. Head office
Price：10,000 yen-100,000 yen

Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat-resistant adhesive repair agent 'GM-8300 (paste type)'

Heat cycle and thermal shock resistance! It has excellent curing performance with minimal shrinkage even in thick applications.

The "GM-8300 (paste type)" is a heat-resistant adhesive repair agent that can also be machined and polished to achieve a high-level metallic luster. It features adhesive strength that does not weaken from -40°C to 220°C, as well as water resistance, seawater resistance, and oil resistance. Applications include bonding metals, ceramics, concrete, FRP, wood, glass, as well as repairs for piping (pipes, steel pipes, boilers, etc.), tanks, mold repairs, engine blocks, mufflers, waterproofing, and rust prevention, among others. 【Features】 ■ Adhesive strength that does not weaken from -40°C to 220°C ■ Durability against thermal cycles and thermal shock ■ Machinable and can be polished to achieve a high-level metallic luster ■ Water resistance, seawater resistance, and oil resistance ■ Curing performance that minimizes shrinkage even with thick applications ■ Thermal conductivity of approximately 1 W/mK *For more details, please refer to the related links or feel free to contact us.

Company：アール・イー・ティー
Price：Other

Repair Agent
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flame-resistant fluoropolymer (PTFE) adhesive tape "No. 923UL"

For general sliding applications, it can be used by bonding to materials such as metal, plastic, and ceramics!

"No.923UL" is a tape made from NITOFLON (Nitoflon) No. 920UL (a high-strength film made of polytetrafluoroethylene resin) as the base material, with surface treatment applied to one side and a heat-resistant silicone adhesive coated on the treated surface. It is suitable for applications such as roll wrapping with polyethylene laminators. It has excellent characteristics, including electrical properties, heat resistance, chemical resistance, and non-stick properties. 【Features】 ■ The non-stick side possesses excellent properties of polytetrafluoroethylene resin, including electrical properties, heat resistance, weather resistance, chemical resistance, water resistance (water repellency), and non-stick properties. ■ Excellent tensile strength ■ Excellent flame resistance *For more details, please refer to the PDF document or feel free to contact us.

Company：Nitto L Materials
Price：Other

Composite Materials
Other polymer materials
Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Like human skin touch! Ultra-soft molding resin 'Human Skin Gel Concentrate Milky White'

Softness like human skin! This ultra-soft modeling resin is perfect for figures, squishies, and anatomical models!

This is a super soft urethane resin that expresses the softness similar to human skin. It has sufficient strength even at low hardness and can express a softness like that of human skin. It can also be colored and is the ideal molding material for human body models, figures, and protective pads, in the form of a "human skin gel" concentrate. **Key Points of Human Skin Gel Concentrate (Milky White)** - **Incredible Softness!** This is a molding urethane resin that possesses a softness that has been nearly impossible to achieve at the user level until now. - **Three Hardness Options Available** You can choose from three levels of softness depending on your intended use: - Hardness 0 (like a cheek) - Hardness 7 (like a shoulder) - Hardness 15 (like a heel) - **Sufficient Strength** It has adequate strength even at low hardness, making it suitable for creating medical models, hobbies, and figures. - **Self-Adhesive Properties** The cured human skin gel has self-adhesive properties. If adhesion is a concern, please use talc powder or a separately sold surface coating agent. - **Custom Model Production Requests Accepted!** *For more details, please feel free to contact us.*