We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Resin(100) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jan 21, 2026～Feb 17, 2026
This ranking is based on the number of page views on our site.

Resin Product List

61～90 item / All 303 items

Displayed results
PLA (polylactic acid) resin for molding

PLA (polylactic acid) resin for molding

Complies with Ministry of Health, Labour and Welfare Notification No. 370 of the Food Sanitation Act! 100% plant-based (made from corn).

Our company handles PLA (polylactic acid) resin, a safe and stable material made from plant-derived, natural organic compounds for molding. It is carbon neutral and complies with the biomass PLA mark. It has excellent self-extinguishing properties, and the gases produced during combustion are also lower compared to PET. 【Features】 ■ Safe and stable material made from plant-derived, natural organic compounds ■ Carbon neutral ■ Complies with the biomass PLA mark ■ Excellent self-extinguishing properties, with lower combustion gases compared to PET ■ Complies with Ministry of Health, Labour and Welfare Notification No. 370 of the Food Sanitation Act *For more details, please refer to the PDF materials or feel free to contact us.

  • plastic
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermal Conductive Flexible Resin TE-8008

Thermal Conductive Flexible Resin TE-8008

This is a flexible epoxy resin of a two-component mixed type with thermal conductivity. It has a thermal conductivity of 1.1 W/mK, flame retardancy equivalent to V-0, and is characterized by crack resistance.

TE-8008 2-component mixed epoxy resin Features: Flexibility, thermal conductivity, environmentally friendly, flame retardant equivalent to V-0, Applications: Sealing and molding for electrical and electronic components requiring crack resistance *Heat resistance is approximately 100°C. *For more details, please download the characteristic table PDF from below or feel free to contact us. *For flexible resins of other grades, please refer to the PDF document "Epoxy & Acrylic Resins 'TERADITE'" available below.

  • Other polymer materials
  • Other electronic parts
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Light Shaping Example "Air Duct"

Light Shaping Example "Air Duct"

We will introduce examples of modeling using CMET's light curing technology and useful information for development sites!

There have been heat-resistant photopolymer resins that excel in heat resistance for some time, but they were all brownish or colored, with no transparent options available. However, the transparent heat-resistant resin "TSR-884B" possesses extremely high transparency while having heat resistance of over 100°C when subjected to heat treatment. By comparing it with the same shaped object below, you will be able to appreciate the high transparency of TSR-884B. With this, visual evaluation can be easily achieved without the need for meticulous polishing of the model. 【Applications】 - Design confirmation - Supporting and verifying CAE analysis results - Assembly confirmation ● For more details, please download the catalog or contact us.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spray foam insulation

Spray foam insulation

Environmentally friendly, non-Freon, non-formaldehyde onsite foamed low-density urethane foam that is gentle on both people and the environment.

Our company specializes in spray foam polyurethane insulation for various structures, from residential homes to buildings and condominiums. Spray foam polyurethane completely envelops the entire house from corner to corner, providing high airtightness, and its countless fine bubbles offer approximately 1.5 times the insulation performance of 10kg glass wool. Additionally, depending on the expansion ratio, there are options for residential use (100 times) and for buildings (30 or 40 times), making it suitable for a variety of properties. 【Features】 ■ Environmentally friendly ■ High airtightness and insulation ■ Energy-saving ■ Excellent acoustic performance ■ Long lifespan ■ Low cost *For more details, please feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rosin terpene phenolic resin

Rosin terpene phenolic resin

It can be adapted to high heat-resistant products.

We handle "rosin terpene phenolic resin," which has low molecular weight, high softening point, excellent heat and acid resistance, and strong adhesion. It has good compatibility with acrylic acid-based polymers and high polymers such as SIS, SBS, SBR, EVA, CR, and NR, enhancing adhesion, retention, and shear strength. 【Specifications】 ■ Color: 7 max ■ Softening Point ・RT-P85: 80-90 ・RT-P105: 100-110 ・RT-P125: 120-130 ・RT-P155: 150-160 ■ Acid Value ・RT-P85: 45-60 ・RT-P105: 45-60 ・RT-P125: 50-80 ・RT-P155: 45-60 *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluororesin Material Molding Technology | Compatible with Various Sizes of PTFE Material

Fluororesin Material Molding Technology | Compatible with Various Sizes of PTFE Material

Adjustable size and shape of materials with direct pressure compression molding! High-quality fluororesin | Forming PTFE material.

Compression molding is a molding method in which powdered PTFE raw material is placed inside a cylindrical mold, compressed to solidify the material, and create the product. - Adjustable to sizes and shapes according to customer requirements - Molding possible for dimensions up to 100L 【Features】 ★ High Quality - Molding conditions and firing conditions are set based on shape and size, allowing for the production of high-quality molded products. - The molding area is maintained in a clean environment with personnel wearing lab coats to prevent contamination. ★ Automation - Automated press machines have been introduced to accommodate mass production.

  • Engineering Plastics
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plant-derived resin (bioengineering plastic)

Plant-derived resin (bioengineering plastic)

Optical industry, for electronic devices and automobiles! Excellent scratch resistance and impact resistance comparable to PC resin.

We would like to introduce the "plant-derived resin (bioengineering plastic)" handled by Asahi Molding. Compared to polycarbonate resin, it features high transparency and excellent optical properties, as well as outstanding scratch resistance and impact resistance comparable to PC resin. 【Features】 ■ High transparency ■ Excellent optical properties and scratch resistance ■ Impact resistance comparable to PC resin ■ Heat resistance temperature: 90℃ to 100℃ ■ Block achievements: Block shipments available *For more details, please refer to the PDF materials or feel free to contact us.

  • Other polymer materials
  • plastic
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermoplastic resin

Thermoplastic resin

Thermoplastic resin with excellent light resistance, light blocking properties, and UV absorption.

Our company primarily handles "thermoplastic resins," which are used in a wide variety of roads as thermoplastic road marking paint. These are produced through a special composition and process of gum rosin and other raw materials. In addition to a light color and moderate softness, they excel in properties such as light resistance, light blocking, and UV absorption. We can also customize production based on requests, so please feel free to consult us if you have any requirements. 【Specifications】 ■Appearance: Transparent light yellow granules ■Hue: 2-3 ■Softening point ・RM-95: 92-98 ・RM-100: 97-103 ・RM-105: 102-108 ・RM-110: 107-113 ■Acid value: 10-15 *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin, plastic materials thermal mechanical analysis (TMA)

Resin, plastic materials thermal mechanical analysis (TMA)

Physical changes such as expansion and contraction of the sample due to heating can be confirmed!

In "Thermomechanical Analysis (TMA)," which is one type of thermal analysis, the dimensional changes such as expansion, compression, and tension of a sample are measured when the temperature changes, allowing for the evaluation of thermal properties such as linear expansion coefficient, glass transition temperature, and softening point. Differences in the flow direction of the resin during molding of resin-molded products (same material) can be confirmed by the different expansion rates and their differences. Physical changes in the sample, such as expansion or contraction due to heating, can be observed. 【Measurement Conditions】 ■ Temperature Range: -100 to 300℃ ■ Measurement Atmosphere: Air, N2 ■ Measurement Mode: Compression, Expansion, Tension, Penetration ■ Applicable Standards: JIS K7196 Penetration Mode JIS K7197, ISO 11359-2 Linear Expansion Coefficient Measurement *For more details, please refer to the related links or feel free to contact us.

  • Contract measurement
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Solvent-free high refractive index optical imprinting agent NK OPTIMER NX003

Solvent-free high refractive index optical imprinting agent NK OPTIMER NX003

Solvent-free high refractive index optical imprinting agent NK OPTIMER NX003

Solvent-free with a viscosity of approximately 3000 mPa·s (25°C), suitable for thick applications. nD1.69, high refractive index. Suitable for WLO, MLA, AR/MR waveguides, and metamaterials.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antibacterial and anti-mold grade "Klinpy PPF"

Antibacterial and anti-mold grade "Klinpy PPF"

High rigidity polypropylene! Suitable for food manufacturing equipment, transport pallets, and more.

"Climpy PPF" is a polypropylene resin material that meets antibacterial testing, mold resistance testing, and the Food Sanitation Act. We conducted antibacterial performance tests (JIS Z2801) on this product and untreated polypropylene (PP), confirming that the growth of bacteria, including Staphylococcus aureus and Escherichia coli, is inhibited. We also offer a standard grade "mep-PPF" that complies with the Food Sanitation Act. [Features] ■ High rigidity ■ Chemical resistance ■ Antibacterial and mold-resistant *For more details, please refer to the PDF materials or feel free to contact us.

  • 01.JPG
  • Composite Materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PC GF20% Black

PC GF20% Black

Filled with fiberglass, improving mechanical strength. Can also be used as a flame-retardant material.

"PC GF20% Black" is a polycarbonate resin filled with glass fiber, which enhances mechanical strength such as bending strength. It also has high flame retardancy (V-0/1.5mm) and is a light-blocking grade, similar to unfilled PC black. It is suitable for impellers, fins, housing covers, and metal alternative parts. 【Features】 ■ GF20% filled polycarbonate resin ■ Improved mechanical strength compared to standard PC grade ■ V-0 flame retardancy ■ High light-blocking performance *Please feel free to contact us for more details about the material.

  • others
  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PBT GF30% Natural

PBT GF30% Natural

A resin material with excellent electrical properties, chemical resistance, high strength, and dimensional stability.

"PBT GF30% Natural" is a reinforced grade with 30% glass fiber filled in PBT. Compared to the unfilled grade, it has enhanced mechanical strength and demonstrates excellent dimensional stability and strength even at high temperatures. It is used in EV components, pulley parts, fan parts, and components related to electric vehicle development. 【Features】 ■ Polybutylene terephthalate resin ■ Excellent electrical properties and chemical resistance ■ High strength and excellent dimensional stability *Please feel free to contact us for more details about the material.

  • others
  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A thermosetting epoxy resin system that can recycle both fibers and resins.

A thermosetting epoxy resin system that can recycle both fibers and resins.

CFRP using EzCiclo can be decomposed by reacting with the dedicated decomposing agent CleaVER in a reaction kiln, allowing for recovery without damaging the fibers.

Not only fibers but also resins can be reused and remolded, making recycling possible and significantly contributing to the realization of a circular society. 【Features】 ■ 100% recoverable resin ■ No need to introduce new equipment ■ Maintains the length of recovered fibers ■ Maintains the strength of recovered fibers ■ No waste generated ■ Can greatly contribute to a circular society *For more details, please refer to the PDF materials or feel free to contact us.

  • Composite Materials
  • Composite Materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Joint Surface Treatment Agent "Hitlock K"

Joint Surface Treatment Agent "Hitlock K"

No need to collect abrasives generated during blasting! It excels in the efficiency of friction surface treatment work and improves workability.

"Hit Rock K" is a treatment agent that ensures the quality of friction surface treatment and reduces the burden on the surrounding environment. By using power tools to adjust the base on the joint surfaces of existing steel structures and applying this product, it is possible to generate red rust and secure the specified coefficient of friction. Additionally, it allows for construction with minimal equipment and tools, not only shortening the construction period but also improving economic efficiency. [Features] - Shortened construction period and improved economic efficiency - Enhanced quality - Reduced burden on the surrounding environment *For more details, please download the PDF or feel free to contact us.

  • Other consumables
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Prototype] Moisture-permeable polyurethane resin

[Prototype] Moisture-permeable polyurethane resin

Imparting breathability to polyurethane resin with excellent flexibility! Film formation is possible with just the drying process!

This product is a prototype of "breathable polyurethane resin" created by the Functional Coating Division of Arakawa Chemical Industries, Ltd. Breathability has been added to the highly flexible polyurethane resin. As it is a one-component type, it can be film-formed through a drying process only. Film strength and breathability can be adjusted according to your requirements. 【Specifications】 ■Viscosity (mPa·s): 1600 ■Non-volatile content (%): 20.0 ■Solvent composition: Toluene/Isopropyl alcohol = 7/3 *For more details, please refer to the PDF document or feel free to contact us.

  • Coating Agent
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Case] Correction of sunken store floor due to consolidation settlement in a large chain store.

[Construction Case] Correction of sunken store floor due to consolidation settlement in a large chain store.

Implementing with sufficient attention to noise! Introducing examples of work conducted at night during business closure.

Here is an example of "settlement correction work" carried out at a large chain store in Akita Prefecture. Due to consolidation settlement, a maximum settlement of 121mm occurred. We addressed this using the Upcon method, which produces almost no noise, dust, or vibration, while paying particular attention to nighttime noise for nearby residents during construction. The work was carried out over four nights outside of business hours. We injected polyurethane resin into the floor slab and corrected all areas within the construction range, including the maximum settlement of 121mm, to within the planned values. (Correction of over 100mm) 【Case Overview】 ■ Construction Area: Approximately 1,160m2 ■ Maximum Settlement: 121mm ■ Area: Akita Prefecture ■ Construction Period: Continuous nighttime work for four days *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Powdered resol resin "Pure Resole (PUR) Series"

Powdered resol resin "Pure Resole (PUR) Series"

No hardener required for heat curing! It has low moisture absorption and excellent anti-blocking properties.

The "Pure Resole (PUR) Series" is a product that begins curing at temperatures lower than approximately 130°C, where the curing reaction between novolac and hexamine occurs, and it exhibits a gentle reaction characteristic. It has achieved the powdering of solid resole-type phenolic resin that performs thermal self-curing without the need for curing agents such as hexamine. This product is not subject to the Poisonous and Deleterious Substances Control Law. It has high bending strength as a molding adhesive. 【Features】 ■ Thermal self-curing without the need for curing agents such as hexamine ■ High bending strength as a molding adhesive ■ Lower moisture absorption compared to novolac + hexamine systems, with blocking resistance ■ High dispersibility with fillers is expected *For more details, please download the PDF or feel free to contact us.

  • 粉末レゾール樹脂『ピュアレゾール(PUR)シリーズ』2.jpg
  • 粉末レゾール樹脂『ピュアレゾール(PUR)シリーズ』3.jpg
  • 粉末レゾール樹脂『ピュアレゾール(PUR)シリーズ』4.jpg
  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Luoyang Huacheng Co., Ltd. Business Introduction

Luoyang Huacheng Co., Ltd. Business Introduction

For precision processing of resin materials, we can achieve all types of processing with all materials!

Our company is engaged in the business of fine hole processing from general-purpose resin materials to super engineering plastics. We have established an environment that can produce high quality with a tolerance of 1/100, and we conduct inspection checks in our inspection room for all products. Only those products that pass our internal inspection are provided to customers along with a measurement result report. Additionally, we are flexible in responding to high quality, a wide variety of products, small lots, and short delivery times. Please feel free to contact us with your requests. 【Product Line】 ■ General-purpose plastic processing ■ Super engineering plastic and engineering plastic processing ■ Glass epoxy processing ■ Metal processing *For more details, please contact us or download the catalog.

  • Other machine elements
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hydrophobic Liquid Polyurethane Resin "Bandestop 50"

Hydrophobic Liquid Polyurethane Resin "Bandestop 50"

You can use it to stop water leaks from cracks in concrete structures.

"Bandestop 50" is a hydrophobic one-component polyurethane resin developed for stopping leaks. For major leaks, please consider the higher-grade acrylic-based two-component synthetic resin "Bandex Flexin." 【Features】 ■ Can be used safely without solvents ■ Low viscosity for excellent workability ■ Immediately foams upon contact with moisture, providing a sealing effect ■ Complies with Ministry of Health, Labour and Welfare Notification No. 45 regarding material testing for equipment and materials *For more details, please download the PDF or feel free to contact us.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-quality resin "MR-PET"

High-quality resin "MR-PET"

Realizing "from bottle" to "to bottle"! Restoring material properties for repeated use in the same application.

We have developed "MR-PET," equivalent to virgin materials, by harnessing the wisdom of Kyoei Sangyo through our unique technology. We thoroughly remove not only surface dirt but also impurities that have seeped into the resin under vacuum and high-temperature conditions, preventing deterioration of physical properties and restoring IV values. The high-purity resin MR-PET that was born from this process is already being used in applications that come into direct contact with food, such as beverage bottles, and will continue to expand further in the future. Additionally, we consider waste plastics, including used PET bottles from factories and households, as "oil fields emerging from the city = urban oil fields." 【Features】 ■ Practical application of beverage PET bottles made from 100% "MR-PET" ■ New possibilities and expansions with bottle-to-bottle recycling ■ Realization of IV value (viscosity) recovery ■ Thorough pursuit of high safety standards ■ Achievement of sustainable packaging *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High heat-resistant epoxy resin liquid material 'VX-3657A/B'

High heat-resistant epoxy resin liquid material 'VX-3657A/B'

Adapted for high heat resistance! We provide liquid formulation materials used in power modules and more.

"VX-3657A/B" is a liquid epoxy resin formulation designed to meet the high heat resistance requirements associated with the advancement and miniaturization of electronic products. Due to its characteristics of high heat resistance, high fluidity, and low stress, it is applicable in power modules and similar applications. Additionally, because of its low linear expansion and low shrinkage rate, it is also used for high heat-resistant substrate encapsulation. 【Physical Property Data (Partial)】 ■ Curing Conditions ・100℃×1h + 180℃×2h ■ Glass Transition Temperature ・200℃ ■ Linear Expansion Coefficient α1 ・14ppm *For more details, please refer to the PDF document or feel free to contact us.

  • plastic
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thomson Blade Performance Testing Machine "TSV Type"

Thomson Blade Performance Testing Machine "TSV Type"

This is a notice from Mutou Design Co., Ltd. regarding the "Thomson Blade Performance Testing Machine, Model TSV."

This is a device for inspecting the extraction unevenness of label Thomson blades. By adjusting the pressing distance in increments of 0.01mm, the extraction unevenness can be visually confirmed. 【Features】 ■ A load cell-equipped screw servo is used in the pressing section, achieving high precision with a repeatability of ±0.01mm. ■ The dedicated software allows for recording and managing distance and pressing load. ■ A powder brake is employed in the unwinding section to maintain a constant tension on the test paper material.

  • others
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UV-curable resin with a methacrylate group

UV-curable resin with a methacrylate group

It is a di-functional urethane methacrylate with a methacrylate group.

This product is a di-functional urethane methacrylate with a methacrylate base. It is suitable as a base resin for thermosetting adhesives, anaerobic adhesives, and sealing/casting agents. - Due to its milder reactivity compared to acrylate bases, it has low exotherm, anaerobic curing properties, and low curing shrinkage. It is also characterized by high heat resistance and low toxicity due to its high Tg. - It has a structure that combines hydrolysis resistance from the ether backbone and toughness from the aromatic component. - It uses plant-derived raw materials, making it possible to consider environmentally friendly product development. It is supplied in liquid form. Please download the catalog for more details. We also offer free samples, web seminars, and product customization. Feel free to contact us.

  • plastic
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection molding resin

Injection molding resin

Proposals for metal alternatives in automotive parts are also possible! We introduce resins that excel in chemical resistance and heat resistance.

We would like to introduce the characteristics of resins used in injection molding. "PA6" excels in chemical resistance, toughness, and impact resistance, and has flexibility. "PA66" not only has excellent chemical resistance but also superior heat resistance and mechanical strength compared to nylon 6. "PC (polycarbonate)" boasts excellent transparency, impact resistance, heat resistance, and flame resistance. Additionally, there are many options such as "POM (polyacetal)," which has low water absorption and excellent sliding properties and wear resistance, making it suitable for bearing applications, as well as "PPE" and "SPS." 【Resin Lineup】 ■ PA6, PA66, PBT, PC, POM, PPE, SPS, PPS, PES, PP, ABS *For more details, please refer to the PDF document or feel free to contact us.

  • Injection Molding Machine
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
C9 series hydrocarbon resin

C9 series hydrocarbon resin

It has little color change and maintains strong heat resistance and adhesion.

Our company handles "C9 series hydrocarbon resins," which are produced from petroleum-derived C9 fractions using catalytic polymerization techniques, characterized by low molecular weight, thermoplasticity, and aromaticity. These resins are pale yellow solid granules with excellent solubility, mutual solubility, water resistance, retention, adhesiveness, and thermal conductivity against acids and alkalis. Additionally, they dissolve in coal tar, esters, turpentine oil, and vegetable oils, are insoluble in alcohol solvents, but partially dissolve in petroleum solvents. 【Applications】 ■ Adhesives ■ Coatings ■ Inks ■ Rubber, etc. *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transparent and visualization model production, capable of withstanding temperatures up to 220 degrees.

Transparent and visualization model production, capable of withstanding temperatures up to 220 degrees.

Total support from specification review to secondary processing! We propose suitable materials and methods based on heat resistance, strength, shape, and more.

We provide total support from 3D data creation, modeling, machining, to inspection according to specifications. Machining is possible with a minimum intersection tolerance of ±0.05. We will listen to your specifications and propose suitable materials and methods. 【Features】 ■ Proprietary developed material: Heat-resistant up to 220℃ transparent resin for light curing SIS-200 ■ Total support from specification consideration to secondary processing ■ Machining is possible with a minimum intersection tolerance of ±0.05 ■ We propose suitable materials and methods based on heat resistance, strength, shape, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • Contract manufacturing
  • 3D Printer
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision machining of polyimide resin (PI resin) [SCM8000]

Precision machining of polyimide resin (PI resin) [SCM8000]

We offer precision machining of the SCM8000 from PBI Corporation. We have a large inventory. From small lots of 1 piece to mass production!

The SCM8000 is a machining material made from ultra-high heat-resistant polyimide UPI natural grade, compressed and molded using the PBI method. It features ultra heat resistance, a load deflection temperature of up to 480°C, excellent mechanical properties, good wear resistance, low water absorption, and anti-static/conductive properties. We respond to customer needs with advanced processing technology tailored to the characteristics of PBI resin. 【Key physical properties at 23°C (partial)】 ■ Tensile strength: 100 MPa (Standard ISO 527) ■ Tensile strain: 2.0% (Standard ISO 527) ■ Flexural strength: 190 MPa (Standard ISO 178) ■ Flexural modulus: 7.0 GPa (Standard ISO 178) ■ Charpy impact strength (notched): 1.5 kJ/m² (Standard ISO 179) *You can view our available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.

  • Processing Contract
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RILSAN (Polyamide 11, PA11)

RILSAN (Polyamide 11, PA11)

High-performance polyamide 11 made from 100% plant-derived carbon: high-performance polyamide based on PA11 (Nylon 11).

By pressing the seeds of "castor bean," which can be cultivated even in barren land where edible plants do not grow, we can obtain "castor oil." Arkema synthesizes 11-aminoundecanoic acid (PA11 monomer) by chemically processing castor oil and is the only company in the world that manufactures and sells polyamide 11 (PA11, nylon 11) under the brand name Rilsan. Rilsan has obtained the biomass mark established by the Japan Organic Resources Association and has been certified as biomass plastic by the Japan Bioplastics Association, being listed on the positive list. Rilsan (PA11) has good crystallinity, making it significantly superior in "chemical resistance," "impact resistance," and "thermal degradation resistance" compared to PA12 (nylon 12), which has similar properties. Due to the following excellent characteristics, Rilsan has been used in various applications for over 60 years: - Low density (1.03) - Abrasion resistance and scratch resistance - Wide temperature range (-40°C to 150°C) - Weather resistance - Excellent mechanical strength - Heat resistance - Flexibility - Molding processability - Chemical resistance - Low water absorption rate

  • Engineering Plastics
  • Resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Resin

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.