Last Updated： Aggregation Period:Sep 23, 2026～Oct 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 23, 2026～Oct 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 23, 2026～Oct 20, 2026
This ranking is based on the number of page views on our site.
271～300 item / All 2121 items
CR flat washer
When the hole diameter of the material being tightened is larger than that of the screw, it can stabilize the screw head. By increasing the surface area of the screw head, it enhances the contact with the material. It is also referred to as a washer or flat washer. This product is compliant with EU-RoHS.
Silicone rubber K-127 flat washer
When the hole diameter of the material being fastened is larger than that of the screw, it can stabilize the screw head. By increasing the surface area of the screw head, it enhances the contact with the material. It is also referred to as a washer or flat washer. It is compliant with EU-RoHS standards.
Urethane flat washer
When the hole diameter of the material being fastened is larger than that of the screw, it can stabilize the screw head. By increasing the surface area of the screw head, it enhances the adhesion with the material. It is also referred to as a washer or flat washer. This product is compliant with EU-RoHS standards.
Stainless Steel 316L + Small Pan Screw with NBR
This is a pan head screw incorporating NBR-made set washers (NBRS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU-RoHS standards.
Stainless Steel 316L + Small Pan Screw with Silicone Washer
This is a pan head screw incorporating a silicone rubber set washer (SIS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU-RoHS standards.
Aluminum + small pot screw with silicone washer
This is a pan head screw incorporating a silicone rubber set washer (SIS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU-RoHS standards.
Titanium + small pot screw with NBR washer
This is a pan head screw incorporating NBR-made set washers (NBRS series). It prevents the washers from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU RoHS standards.
Titanium + small pan screw with silicone washer
This is a pan head screw incorporating a silicone rubber set washer (SIS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU-RoHS standards.
PEEK + small screw with NBR washer
This is a pan head screw incorporating NBR-made set washers (NBRS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU RoHS standards.
PPS + small pan screw with silicone washer
This is a pan head screw incorporating a silicone rubber set washer (SIS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU RoHS standards. * There may be slight discoloration depending on the lot and various conditions. * There may be black spots (sludge) on the surface, but it does not affect performance. * The dimensional control of the screw part is based on the fit with the nuts of the same series.
RENY + small screw with NBR washer
This is a pan head screw incorporating NBR-made set washers (NBRS series). It prevents the washers from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU-RoHS standards. *Note: There may be slight discoloration depending on the lot and various conditions. *There may be black spots (sludge) on the surface, but it does not affect performance. *The dimensional control of the screw part is based on the fit with the nuts of the same series.
PC + small pan screw with NBR washer
This is a pan head screw incorporating NBR-made set washers (NBRS series). It can prevent the washers from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU-RoHS standards. * There may be slight discoloration depending on the lot and various conditions. * There may be black spots (sludge) on the surface, but it does not affect performance. * The dimensional control of the screw part is based on the fit with the nuts of the same series.
PC + small pan screw with silicone washer
This is a pan head screw incorporated with a silicone rubber washer (SIS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. It is compliant with EU-RoHS standards. * There may be slight discoloration due to lot and various conditions. * There may be black spots (sludge) on the surface, but it does not affect performance. * The dimensional control of the screw part is based on the fit with the nuts of the same series.
Stainless Steel Precision Equipment No. 0 Type 1 + Small Pan Head Screw with Nylon Locking Treatment
Specification: Japan Camera Industry Association Standard (JCIS10-70) This is a precision instrument 0-size type 1 + pan head screw with a Nylock treatment on the threaded part. The screw head is smaller than that of a JIS standard pan head screw with a cross hole. The 0-size type 1 + pan head screw is also referred to as a micro screw or camera screw. It complies with EU-RoHS2 standards. - About the anti-loosening treatment Nylock is a reliable anti-loosening processing technology that permanently adheres special nylon to the threaded part. The principle of Nylock's anti-loosening is that when the screw is tightened, the elastic rebound force of the adhered special nylon generates a strong frictional bonding force across the entire threaded part on the opposite side of the processed area, providing a permanent anti-loosening function against vibrations and shocks. It exhibits excellent anti-loosening effectiveness in frequently used areas. This offers advantages not found in bonded anti-loosening products or lock nuts that deform the threaded part. Nylock is a registered trademark of Nylok LLC. *Please inquire separately as specifications may change when used in critical safety locations such as railway vehicles, aircraft, and military applications.
Steel (black oxide coating) hexagon socket set screw with pointed tip.
This is a screw with a head that has the same shape as the threaded part and features a hexagonal hole. It is tightened using a hexagonal rod wrench (hex key). It is used to press the tip of the screw against the mating part to secure it. The pointed tip of the screw is embedded into the mating part for fixation. It is also known as a set screw or grub screw. It is compliant with EU-RoHS2 standards.
Nylon cosmetic screw No.2
This is a screw that can be tightened by hand. It has excellent wear resistance, lubricity, chemical resistance, and oil resistance. It is suitable for use in lighting fixtures, display equipment, electrical devices, and office equipment. It complies with EU-RoHS2 standards.
Black nylon cosmetic screw No. 2
This is a screw that can be tightened by hand. It has excellent wear resistance, lubricity, chemical resistance, and oil resistance. It is suitable for use in lighting fixtures, display equipment, electrical devices, and office equipment. It complies with EU-RoHS2 standards.
Stainless steel hex socket set screw with a recessed tip and nylon lock processing.
This is a stainless steel hex socket set screw with a nylon lock treatment on the threaded part and a recessed tip. It is tightened using a hex wrench. It is used to secure the screw tip against the mating component. Because the screw tip is recessed, it may leave circular marks on the mating component. It is also called a "hollow set screw" or "set screw." It complies with EU-RoHS2 standards. Nylon lock is a reliable anti-loosening processing technology that permanently adheres special nylon to the threaded part. The principle of nylon lock's anti-loosening is that when the screw is tightened, the elastic rebound force of the adhered special nylon generates a strong frictional bonding force across the entire threaded part on the opposite side of the processed part, providing a permanent anti-loosening function against vibrations and impacts. It demonstrates exceptional anti-loosening effectiveness in areas with frequent repeated use. This offers advantages not found in bonded anti-loosening products or lock nuts that deform the threaded part. *Note: Nylon lock is a registered trademark of Nylok LLC.*
![[Materials] Thinking Tips for Designers: Case Studies on Problem Solving](https://image.mono.ipros.com/public/product/image/882/2000899874/IPROS8830821790219159830.jpg?w=280&h=280)
For those who are interested in keywords such as semiconductor manufacturing equipment and automotive manufacturing processes.
This case study collection introduces numerous solution examples that can serve as hints for our customers' concerns. We present issues and solution examples specific to each industry, as well as our products that can provide hints for customers' design and development. Additionally, you can search for solution examples submitted by actual designers of manufacturing equipment based on customer concerns. We encourage you to utilize this for problem-solving. 【Contents】 ■ Problem-solving examples found from concerns ■ Problem-solving examples found by industry ■ Introduction of NBK products ■ NBK's commitment to the environment *For more details, please download the PDF or feel free to contact us.
It has the highest strength and elasticity among engineering plastics.
【Features】 1. It has the highest strength and elasticity among engineering plastics. 2. It has excellent chemical resistance to lubricants, gasoline, various organic solvents, and alkalis. 3. Compared to general-purpose polyamides (PA6, PA66), it is less prone to water absorption, resulting in minimal strength reduction and dimensional changes due to moisture. 4. It has excellent fatigue and creep properties. 5. Continuous use temperature: 105°C (UL setting temperature) 6. Flammability: UL94 HB *For more details, please refer to the PDF document or feel free to contact us.
![Linear guides, pole screws, etc. [Used items for sale]](https://image.mono.ipros.com/public/product/image/16c/2000347562/IPROS7404097997646267934.jpg?w=280&h=280)
Are you having trouble with delivery delays for linear guides and ball screws?
Due to a sudden increase in demand, linear guides and ball screws continue to be in short supply. High-Tech Precision is selling used linear guides and ball screws. For details on our offerings, please download the list from "PDF Download" and check it. You can also purchase from https://www.h-pre.shop. For more information, please refer to the PDF materials and contact us, or check https://www.h-pre.shop.
Starting the sealing hole treatment for cast products at room temperature and atmospheric pressure, with a transparent high heat-resistant coating of 1500°C. Compared to vacuum processing, this offers cost reduction and shorter delivery times, with a transparent high heat-resistant specification.
Starting from October 2012, Adapt will begin accepting orders for sealing hole treatments on cast products using inorganic film surface treatment.
Countermeasures for cam-out that can be used with your existing cross bits! Improve work efficiency.
● Does not come out ● Good torque transmission rate ● Good adhesion with bits ● Excellent bit durability ● Can be used with commercially available cross bits (*There are also dedicated tools to enhance effectiveness) *For more details, please refer to the catalog. For inquiries, please contact Koyama Co., Ltd.
There are screw designations such as M2, M2.3, M2.5, M2.6, M3, M3.5, M4, and M5!
We would like to introduce the "pan head screws" that we handle. The materials include iron, brass, stainless steel, aluminum, and titanium, among others. Additionally, we offer screw sizes ranging from M2 to M12. Please feel free to contact us if you have any requests. 【Partial lineup】 ■M2 ■M2.3 ■M2.5 ■M2.6 ■M3 *For more details, please feel free to contact us.
A wide variety of quantities available, such as 12,000 × 20! Materials include iron, brass, and stainless steel.
We would like to introduce the "round plate small screws" that we handle. We offer materials such as iron, brass, stainless steel, and SUS316L. We have a lineup ranging from M2 to M8. Please feel free to contact us if you have any requests. 【Partial lineup】 ■M2 ■M2.3 ■M2.5 ■M2.6 ■M3 *For more details, please feel free to contact us.
Starting with JIS round small screws, we also have a lineup of Whitworth type and brass JIS round small screws!
We would like to introduce the "round small screws" that we handle. The materials are iron, brass, and stainless steel. We offer screw sizes from M4 to M16. Additionally, we have JIS round small screws, round small screws (Whit), and brass JIS round small screws. Please feel free to contact us if you have any requests. 【Product Lineup (Partial)】 ■ Round small screws - M4, M6, M8, M10, M12, M16 ■ JIS round small screws - M3, M4, M5 ■ Round small screws (Whit) - W1/8, W5/32, W3/16, W1/4, W5/16, W3/8, W1/2 *For more details, please feel free to contact us.
We have a wide variety of quantities available, such as 2000×20! Introducing our small screws.
We would like to introduce the "Slim Head Screws" that we handle. The materials used are iron and stainless steel. The screw sizes available are M2, M2.6, M3, M4, M5, and M6. Please feel free to contact us if you have any requests. 【Product Lineup】 ■M2 ■M2.6 ■M3 ■M4 ■M5 ■M6 *For more details, please feel free to contact us.
The materials are chrome, nickel, black zinc, tin cobalt, and other iron and stainless steel!
We would like to introduce our "Hexagon Socket Set Screw (Hollow Set) <Flat Tip>." We offer screw sizes ranging from M1.6 to M24. The materials available include iron, stainless steel, and SUS316L. Please feel free to contact us if you have any requests. 【Screw Sizes (Partial)】 ■M1.6 ■M2 ■M2.5 (2.6) ■M3 ■M4 *For more details, please feel free to contact us.
The screw sizes available include M1.6, M2, M3, M4, M5, M6, and many more!
We would like to introduce our "Hex Socket Set Screw (With Pointed End)." We offer materials such as iron, stainless steel, and SUS316L. The screw sizes range from M1.6 to M16. Please feel free to contact us if you have any requests. 【Screw Sizes (Partial)】 ■M1.6 ■M2 ■M2.5 (2.6) ■M3 ■M4 *For more details, please feel free to contact us.
The materials include trivalent white, trivalent black, zinc black, and other types of iron and stainless steel!
We would like to introduce our "Hex Socket Set Screws (Hollow Set) <Rod End>." The materials include iron in finishes such as raw, zinc-plated, chromated, and nickel, as well as stainless steel. We offer screw sizes ranging from M1.6 to M20. Please feel free to contact us if you have any requests. 【Screw Sizes (Partial)】 ■M1.6 ■M2 ■M2.5 (2.6) ■M3 ■M4 ■M5 *For more details, please feel free to contact us.
