Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
466～480 item / All 1183 items
17mm x 30mm DC brush motor base low-cost micro gas pump! Ideal for residential equipment and cleaning pumps.
RK-M1730AP Pump head: 17mm x 30mm Motor OD: 17mm Rated voltage: 6V Flow rate: Max 300mL/m Maximum pressure: 30KPa or more Noise: 60dB
Tester for AC characteristic testing in semiconductor backend processes! Capable of conducting avalanche tolerance tests on products.
We handle semiconductor testers. These testers are used for AC characteristic testing in the semiconductor back-end process, through load testing of MOSFETs and bipolar transistors. We can conduct tests for the avalanche tolerance of products. Please feel free to contact us when you need assistance. 【Features】 ■ Testers for AC characteristic testing in the semiconductor back-end process ■ Load testing of MOSFETs and bipolar transistors ■ Capability to test the avalanche tolerance of products *For more details, please refer to the PDF materials or feel free to contact us.
Bringing globally applicable technology to every corner of the world! We are advancing towards a global expansion in Asia.
Nippon Electric Co., Ltd. has been manufacturing and selling industrial measuring instruments (air leak testers and valve checkers) and construction machinery safety equipment for 38 years since its establishment in 1973. Air leak testers and construction machinery safety equipment are the main products of NIPPOH. We strive to improve quality and reduce costs so that our users can use NIPPOH products with confidence. 【Business Overview】 ■ Manufacturing and sales of industrial measuring instruments (air leak testers) ■ Manufacturing and sales of construction machinery safety devices *For more details, please refer to the PDF materials or feel free to contact us.
Air leak tester that detects and displays the leakage amount from changes in the air of minute leaks.
The "TLT-3600 Series" is an air leak tester that directly detects leaks rather than using a conventional differential pressure method. The test pressure can be adjusted from 1 kPa to 1 MPa. It detects and displays the leak rate based on minute changes in air due to small leaks. Since it does not calculate the leak rate from differential pressure, it is not affected by the workpiece volume. 【Features】 ■ Directly detects leaks instead of using a conventional differential pressure method ■ Detects and displays the leak rate based on minute changes in air due to small leaks ■ Test pressure can be adjusted from 1 kPa to 1 MPa ■ Leak detection range: 0.01 to 400 cc/min *For more details, please refer to the external link page or feel free to contact us.
Supports single-item mass production lines! Air leak tester using NIPPOH's unique differential pressure sensor.
The "TLT-123 Series" is an air leak tester that employs NIPPOH's unique differential pressure sensor, which meets various conditions for leak testing. It features serial communication, allowing operation and data collection from a computer using dedicated communication software (optional). Additionally, the screen uses an LCD, enabling users to view changes in pressure and leaks in graph form. 【Features】 ■ Utilizes NIPPOH's unique differential pressure sensor ■ Instantaneous changes to various conditions can be made simply by switching the work number ■ Graph display allows for easy confirmation of internal air pressure status ■ Compact, lightweight, and cost-effective ■ Compatible with pneumatic regulators and manual regulator requirements *For more details, please refer to the external link page or feel free to contact us.
It can easily detect tiny debris and dust inside containers with liquids such as medical syringes and ampoules. It is an ideal inspection device for foreign matter detection, such as dust.
Among pharmaceuticals, injectable drugs and infusions that are administered directly into the body require safety and the highest standards of quality. The inspection machine allows for the clear visibility and easy identification of small debris and dust particles within liquid glass containers such as syringes and ampoules used in medical pharmaceuticals. Additionally, it is equipped with a magnifying lens (approximately 3x) on the front, making even small inspection items easier to see, significantly reducing user fatigue during prolonged use. During the inspection process, one can rotate either the upper or lower rotating frame to set the screen to the darkest blue for observation. By adjusting the brightness of the backlighting, debris and dust can be clearly seen as they shine white. This inspection machine has been used for many years in the inspection departments of numerous pharmaceutical companies.
It is a device that determines the rate of dust intrusion into the mask based on the dust concentration inside and outside.
The "MT-05 type" is a device that determines the dust penetration rate (leakage rate %) into the mask by measuring the dust concentration on the outside and inside of a mask worn by an individual. It tests the daily wearing condition of the selected mask in fit check mode. The test uses airborne dust from general indoor environments. For those who are already using a mask, it can be used to assess the selection and suitability of the mask. 【Usage Examples】 ■ Selection of N95 masks or similar that fit one's face ■ Educational guidance on proper mask wearing techniques ■ Measurement of the protection factor of respiratory protective equipment used in handling environments such as indium and refractory ceramic fibers ■ Fit check of the mask before entering the worksite while wearing the mask *For more details, please refer to the PDF document or feel free to contact us.
Measuring is possible from 20Hz to 20kHz! The measurement is done with just one button, making operation very easy.
The "OAT-900" is an audio tester that measures signal generation and signal capture through digital processing. It is used by connecting the hardware unit to a computer via a USB interface. After creating standard data, measurements can be taken with the push of a button, making operation very simple. 【Features】 ■ Measures signal generation and signal capture through digital processing ■ Connects the hardware unit to a computer via USB interface ■ Very easy to operate ■ Capable of measuring from 20Hz to 20kHz *For more details, please refer to the PDF document or feel free to contact us.
Measure the characteristics of speakers and microphones! It is also possible to overlay the measured characteristics for display and printing.
The OAT-706 is an audio tester that can measure the characteristics of speakers and microphones. It automatically measures the audio frequency range (20Hz to 40kHz) using a 1/2 inch condenser microphone. The measured data can be saved to a PC. It is also possible to display and print the overlay of the measured characteristics. 【Features】 ■ Automatically measures the audio frequency range (20Hz to 40kHz) using a 1/2 inch condenser microphone ■ Measured data can be saved to a PC ■ Overlay display and printing of the measured characteristics are possible *For more details, please refer to the PDF document or feel free to contact us.
A self-weight scale tester that allows for easy performance inspection and adjustment of self-weight scale meters!
The "Self-Weight Tester Type S OJ-1249" is a device that allows for the performance inspection and adjustment of self-weight gauges, which are required by the Special Measures Law for large vehicles transporting earth and sand, by applying a load corresponding to the payload weight on the gauge. The measurement load ranges from 10 tons to 20 tons. By installing this device, it is possible to register for the specific measuring instrument repair business for self-weight gauges. 【Specifications】 ■ Measurement Load: 10 tons to 20 tons ■ Power Supply: 200V 3.7kw 4P ■ Main Unit Dimensions: W705×D635×H1240 *For more details, please download the PDF or feel free to contact us.
It is the industry's only hydraulic pressure testing machine for beverage cans.
<Features> 1) Back ring test and lid pressure retention test are possible. 2) Due to the pressure type that allows for the injection of subtle amounts of water, accurate and detailed data collection is possible. 3) Compatible with various types of cans (using can guides). 4) Management of various data (display conditions can be specified) is possible.
The standard measurement target is the thick aluminum wire bond in the post-process of power semiconductor manufacturing.
This product is a laser bond tester that can perform non-contact, non-destructive, and instantaneous measurements of aluminum wire bonds. It comes standard with a function that corrects the measurement position to an optimal location through image processing based on bond position information. This allows for efficient sampling inspections and full bond inspections of medium lots. The measurement method is a laser periodic heating joint interface measurement method. 【Features】 ■ Automatic measurement ■ Non-contact ■ Non-destructive ■ Instantaneous measurement *For more details, please refer to the PDF materials or feel free to contact us.
We will introduce products that can be used for efficient sampling inspections and full bond inspections of medium lots.
This product is a laser bond tester designed specifically for large-diameter aluminum wire bonds with a magazine supply system. It comes standard with a function that corrects the measurement position to an optimal location through image processing based on bond position information. This allows for efficient sampling inspections and full bond inspections for medium lots. For more details, please contact us. 【Overview Specifications (Partial)】 ■ Measurement Method: Laser periodic heating method for measuring bonding interfaces ■ Measurement Targets - Aluminum wire bonding interface condition - Wire diameter: φ200μm to φ400μm ■ Measurement Laser: Semiconductor laser, etc. *For more information, please refer to the PDF document or feel free to contact us.
Compliant with ASTM D1709 and ISO 7765 Test Methods A and B.
Measuring the toughness of films, paper, and packaging materials. Two types: manual and pneumatic. Due to its compact size, it can be easily installed on a tabletop or laboratory bench without taking up much space.
Used for post-accident verification! Known as a pendulum-type testing machine, the British-style slip resistance testing machine.
The "OSK 55MU778" is a portable skid resistance tester from Munro Stanley that complies in detail with relevant international standards. The operation is based on the IZOD principle, where a pendulum of known weight rotates around a vertical spindle. The head of the pendulum, released from a horizontal position, strikes the test surface at a constant speed. Additionally, the pendulum test value (PTV: Pendulum Test Value), which corresponds to 100 times the coefficient of friction, can be directly read from the scale marked on the device. 【Features】 ■ Complies in detail with relevant international standards ■ Calibration certificate can be provided ■ Dedicated protective flight case available (optional) ■ All accessories included as standard can be purchased individually *For more details, please refer to the PDF document or feel free to contact us.
