We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Tester.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Tester Product List and Ranking from 42 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

Tester Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. フクダ Tokyo//Testing, Analysis and Measurement
  2. null/null
  3. ナック Tokyo//Industrial Electrical Equipment
  4. 4 TAKAYA Corporation Okayama//Industrial Electrical Equipment
  5. 5 コスモ計器 Tokyo//Testing, Analysis and Measurement
Go to Company Ranking

Tester Product ranking

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. 接合強度試験機『MFMシリーズ／ABTシリーズ』
  2. Technical Documentation: Introduction to Leak Testers ナック
  3. "Comprehensive Product Guide" "Technical Manual" ／ Fukuda Leak Test フクダ
  4. 4 Basic Knowledge of In-Circuit Testing: What is an In-Circuit Tester? TAKAYA Corporation
  5. 5 Nodson DAGE Bond Tester (Joint Strength Testing Machine) オーヨー

Tester Product List

901～915 item / All 1177 items

Displayed results
Earth High Tester "3151" [Rental]

Earth High Tester "3151" [Rental]

A grounding resistance meter capable of measuring grounding resistance from Type A to Type D.

**Features** - Ground resistance meter compliant with JIS standards - Wide measurement range Accurately measures ground resistance from Type A to Type D grounding work. Additionally, measurements can be taken up to 115% of the measurement range. - More stable measurements Easily check the grounding condition of auxiliary grounding rods for greater accuracy. Furthermore, the measurement frequency can be switched to prevent the influence of harmonic ground currents. - Simple measurement function Switch between normal/simple measurement with a single touch of a button. - Overvoltage protection and warning function During simple measurements with commercial power, common wiring errors are safely warned with an alarm buzzer and overvoltage protection (AC250V/1 minute). - Resistant to mud and dirt Enhanced dust resistance for measurement switches and dials, improving durability. - More convenient accessories Tangles of measurement cables can be easily tidied up with a cable reel.

  • Other electronic measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi Relay Tester "IP-R1500" [Rental]

Multi Relay Tester "IP-R1500" [Rental]

A multi-relay tester that achieves multifunctionality and operability while significantly reducing size and weight compared to the IP-R2000.

**Features** - Maximum output current of 50A: Capable of testing at 1000% against a 5A tap of the overcurrent relay. - Maximum output voltage of 750V: Compatible with overvoltage relays in the 200V range to ground direction relays. - Automatic determination of relay operation: The built-in microcomputer automatically determines the contacts. - Phase reversal switch: Easily reverses the phase during testing of ground direction relays. - Current setting function: Allows setting of test current without directly flowing current to the relay. - Compatible with 10 types of relays: Improved efficiency in testing operations by accommodating various relays. - Lightweight: Reduced weight by 25% compared to conventional devices, enhancing portability. - Convenient output current setting for testing and standard phase reversal function for DGR (ground direction relay testing). - Can connect with a high-voltage withstand transformer (R-1115H) for dielectric strength testing of high-voltage equipment and cables. - Completely prevents incorrect wiring with color-coded connector connections, and ensures safe connections with the use of insulation clips.

  • Other electric meters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery Tester "BT3554-11" [Rental]

Battery Tester "BT3554-11" [Rental]

This is a tester for diagnosing the degradation of secondary batteries primarily based on lead-acid batteries.

**Features** - High noise resistance performance: By adopting noise reduction technology, it significantly reduces fluctuations in measurement values. - Fastest measurement and storage in approximately 2 seconds. - Equipped with a function that automatically holds and saves measurement data once it determines that the measurement lead is connected to the target and that the measurement values are stable. - Display backlight: Considering visibility in dark places, it features a backlight on the LCD, with a light guide plate at the bottom and LED illumination from the sides to achieve the backlight function.

  • Power Supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tech Tester 'R-10000ND' [Rental]

Tech Tester 'R-10000ND' [Rental]

Using the filler attachment, it is possible to check the tensile load of exterior tiles and other materials.

■ Easy to conduct tests in narrow spaces or difficult environments due to its compact and lightweight design. ■ Equipped with convenient features such as auto power off and maximum value hold.

  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tech Tester "KT-20" [Rental]

Tech Tester "KT-20" [Rental]

A testing device for managing building equipment sites that eliminates difficult operations and pursues ease of use and simple functionality.

■ By making the display section analog, the weight of the main unit is reduced. ■ Due to its lightweight design, testing on ceilings and other structures is possible.

  • Strength Testing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
テクノテスター『RJ-1』【レンタル】

テクノテスター『RJ-1』【レンタル】

外壁の劣化調査・施工品質の確認に、接着力・付着力の簡易型引張試験機。

■視認性の良いLED表示、暗い場所でも安心のバックライト付 ■落下事故防止に役立つU字しゃっくるフック付 ■ピークホールド機能により最大荷重値が表示されます。 ■ワンタッチで単位面積当たりの荷重値が表示されます。（N／mm2） ■電池交換のタイミングを逃さない7段階のバッテリー残量表示付き

  • Flaw detection testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anchor Tester "DPG100" [Rental]

Anchor Tester "DPG100" [Rental]

Because it is lightweight, inspections of high places, ceilings, walls, and floors can be easily performed.

A high-precision anchor tester that supports safety and quality at every site. Its lightweight design allows for easy inspections of high places, ceilings, walls, and floors. It can also quickly measure anchor strength non-destructively. 【Features】 - Ideal for maintenance inspections as it allows for strength verification without damage. - Comes in a handy case for easy portability. - Lightweight, enabling one-person inspections of high places, ceilings, walls, and floors. - Digital display of measurement values. - Consistently provides high-precision measurement results. - Allows for simple measurement of anchor displacement simultaneously.

  • Flaw detection testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tech Tester 'KT-6' [Rental]

Tech Tester 'KT-6' [Rental]

This is a testing device for managing construction equipment sites that eliminates difficult operations and pursues ease of use and simple functionality.

With simple operation and an analog (needle) display, it can be used when you want to see the measurement results. 【Features】 ■ Can be loaded with a wrench or similar tool (loading nut: width 21mm) Testing is possible even in hard-to-reach areas where the handle is difficult to turn. ■ Extremely lightweight with a body weight of 1.7kg ■ A simple analog type that allows you to check fine values (minimum display) ■ Equipped with a maximum value hold function using a pointer

  • Flaw detection testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tech Tester "AT-200" [Rental]

Tech Tester "AT-200" [Rental]

This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance standards.

It can simultaneously measure load and displacement. Additionally, it is equipped with an internal memory function for data storage. 【Features】 ■ Focused on usability. Easy to handle, lightweight, and compact - The use of an aluminum cylinder reduces the main unit's weight to 11kg. - Easy connection with hydraulic hoses (3m) featuring one-touch couplers at both ends. ■ Accurate and reliable measurements - Internal memory function Data can be stored at the measurement site without connecting to a computer. Graph test mode: 99 entries (F01 to F99), load and displacement test mode: 9,999 entries (P0001 to P9999). - Equipped with various measurement modes. - Improved visibility in dark environments due to the backlight function. Even in dark sites like tunnels or underground, the backlight function allows clear visibility of numbers to the naked eye. Recording with a digital camera is also worry-free. ■ Practical performance - Capable of measuring loads up to 200kN.

  • Flaw detection testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tech Tester "AT-30D2" [Rental]

Tech Tester "AT-30D2" [Rental]

This is a testing machine that applies tensile loads to verify whether the installed anchor bolts meet the required performance.

It can simultaneously measure load and displacement. Additionally, it is equipped with an internal memory function for data storage. 【Features】 ■ Data storage is possible with the internal memory function - Data can be stored at the measurement site without connecting to a computer. - Graph test mode can store up to 99 entries (F01 to F99), and load/displacement/load test mode can store up to 9,999 entries (P0001 to P9999). ■ Various measurement screen displays 1- Graph test mode Allows for immediate presentation of a simple load/displacement curve to the on-site observers. 2- Load/displacement test mode 3- Load test mode 4- Current time display ■ Backlight function In dark environments such as inside tunnels or underground, the backlight function makes the numbers clearly visible to the naked eye. It is also safe for recording with a digital camera. ■ Simultaneously view the tensile load and displacement of anchor bolts. ■ Data management is possible with a PC.

  • Flaw detection testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ior Leak High Tester 3355-01 (with 9801) [Rental]

Ior Leak High Tester 3355-01 (with 9801) [Rental]

This is an Ior leak hi-tester equipped with a live line megger function that was impossible with an insulation resistance tester.

- Measure leakage current (Io) - Measure effective leakage current (Ior) - Measure insulation resistance to ground (MΩ) - Accurately measure 1mA - Compact design for field use - Insulation inspection can be performed under live conditions - Abundant measurement parameters

  • Voltage Meter
  • Ammeter
  • Other electronic measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Photocatalytic Activity Tester "PAM-NT2"

Photocatalytic Activity Tester "PAM-NT2"

Photocatalytic activity can be measured in 3 to 5 minutes! We have pursued ease of use not only in the laboratory but also in the field.

The "PAM-NT2" is a photocatalytic activity tester designed to measure and evaluate photocatalytic activity at construction sites, ensuring quality control. It reduces the measurement time to less than one-tenth and displays the measurement values in a three-digit digital format. The startup time is short, and stability has been improved. We are pursuing ease of use not only in the laboratory but also on-site. 【Features】 ■ Measurement time reduced to less than one-tenth, with measurement values displayed in three-digit digital format ■ Increased portability due to lightweight design ■ Short startup time and improved stability ■ Standalone type that is robust for on-site use *For more details, please refer to the PDF document or feel free to contact us.

  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
リークテスター『LS3010』

リークテスター『LS3010』

粉末や顆粒などの小袋包装品からのエア漏れを簡単な操作で確認可能！

『LS3010』は、内部に気体を含みながら包装された粉末や顆粒など 小袋包装品を水没検査により気体漏れの有無を目視確認するための試験機です。 水没後、容器を真空にすることにより通常の水没検査に比べ迅速かつ確実に 商品のエア漏れを確認することができます。 手動スイッチとエアエジェクターで動作するので電源不要で検査が可能です。 【特長】 ■気体漏れの有無を目視確認できる ■通常の水没検査に比べ迅速かつ確実に確認 ■手動スイッチとエアエジェクターで動作 ■電源不要で検査が可能 ■ご要望により製品に合わせたホルダーの製作も可能 ※詳しくは、お気軽にお問い合わせ下さい。

  • Company：エムズ
  • Price：100,000 yen-500,000 yen
  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Atech Co. Differential Pressure Air Leak Tester F620

Atech Co. Differential Pressure Air Leak Tester F620

Are you still conducting leak tests with water immersion? Introducing the globally standard differential pressure air leak tester F620.

This product is used for detecting leaks caused by tiny pinholes and scratches that cannot be found through visual or image inspection in welded, fused, or riveted areas of metal products such as aluminum and iron, as well as resin products. It is capable of detecting pinholes on the order of a few micrometers. The inspection device measures the pressure (flow rate) changes by applying pressure and vacuum to the object being inspected (workpiece) to determine its quality. 【Features】 ■ Unique valve structure optimized for leak testing (adopts spool valve for short tact, high responsiveness, and low thermal impact) ■ Advanced sensing technology achieving industry-leading accuracy (±1.0% x measurement value + 1 digit) ■ Visibility enhanced by a large color display (important information displayed simply) ■ Capable of controlling positive and negative pressure with a dual specification regulator ■ Control functions for clamp cylinders and valve switching can be added (operable without PLC) ■ (Optional) Real-time graph display and result acquisition with WINATEQ300 (real-time graph display, result acquisition, and parameter settings possible on PC via dedicated software) *For more details, please refer to the related links or feel free to contact us.

  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Governor Tester

Governor Tester

Governance Tester

High-precision measurement using pneumatic pressure, inverter drive, and a digital tachometer. Accident occurs → National news coverage → Press conference → Massive inquiries and complaints → Lawsuit → Before entering the worst-case scenario such as business closure, I believe a re-evaluation is necessary.

  • Other measurement, recording and measuring instruments
  • Production Management System
  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Tester

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.