We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for alloy.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

alloy(40) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

alloy Product List

61～81 item / All 81 items

Displayed results
Usage of Precipitated Hardening System Silicoroy【Silicoroy Technology Handbook】

Usage of Precipitated Hardening System Silicoroy【Silicoroy Technology Handbook】

High hardness can be achieved through low-temperature heat treatment! Articles on the relationship between hardness and impact value, as well as heat treatment characteristics, are included.

This document introduces the use of precipitation-hardened silicoalloys. It includes topics such as "Heat Treatment Characteristics/Precipitation Hardening," "Examples of Silicoalloy Applications/High Hardness × Corrosion Resistance," and "New Process Design/Localized Softening Treatment." Silicoalloys harden by precipitating Si-based intermetallic compounds, excelling in the balance of hardness and corrosion resistance. [Contents (partial)] ■ What is Silicoalloy? ■ Heat Treatment Characteristics/Precipitation Hardening ■ Tribological Properties/Pin-on-Disk Wear Test ■ Examples of Silicoalloy Applications/High Hardness × Corrosion Resistance ■ Heat Resistance/High-Temperature Hardness *For more details, please refer to the PDF document or feel free to contact us.

  • stainless
  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-fine particle ultra-hard alloy "FX Series"

Ultra-fine particle ultra-hard alloy "FX Series"

Improved chip resistance and corrosion resistance! A cemented carbide with enhanced WC and bonding phase.

The "FX Series" is a carbide alloy that has improved chipping resistance and corrosion resistance due to enhancements in tungsten carbide (WC) and the bonding phase. It is a super fine particle carbide alloy composed of very fine WC raw materials with an average particle size of about 0.5 μm, allowing for high hardness and high-quality sharp edges and surface roughness. 【Features】 ■ Improved wear resistance ■ Enhanced machinability for electrical discharge machining ■ Corrosion resistance ■ Reduced surface roughness and wear of the tool surface caused by environmental factors such as machining heat For more details, please refer to the catalog or feel free to contact us.

  • alloy
  • Processing Contract
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Invar alloy 'IC-EX2' for CFRP molding molds

Invar alloy 'IC-EX2' for CFRP molding molds

Significant cost reduction compared to forged products! The 200℃ endurance is twice that of commercially available products.

The "IC-EX2" is a mold for CFRP molding (autoclave). Our developed low thermal expansion cast steel can flexibly accommodate complex shapes due to the casting process. Since it overcomes the challenges of low mechanical properties, which is a weakness of cast steel, it holds great potential as a mold for precision CFRP molding with excellent mass production capabilities. 【Features】 ■ Improved strength: Increased mold lifespan ■ Cast steel: Significant cost reduction compared to machining from forged steel ■ Cryogenic treatment + annealing ■ 200℃ strength is twice that of commercial products *For more details, please refer to the PDF document or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant, wear-resistant, corrosion-resistant alloy FREA-METAL.

Heat-resistant, wear-resistant, corrosion-resistant alloy FREA-METAL.

Alloy group with high-temperature oxidation resistance exceeding 1000℃, wear resistance maintaining HV500 at 800℃, and high-temperature corrosion resistance that rivals conventional Ni and Co-based alloys.

Conventional nickel-cobalt-based heat-resistant and wear-resistant alloys experience a significant decrease in hardness at high temperatures of 800°C and above. However, FREA-METAL alloys maintain excellent hardness even in ultra-high temperature ranges, and in addition to oxidation and wear resistance, they also possess corrosion resistance. The FREA-METAL alloy series includes a variety of types. For example: - "A," specialized for ultra-high temperature oxidation resistance - "B," excellent in high-temperature wear resistance - "C," strong against sulfuric acid corrosion and others can be selected according to specific applications. These alloys can significantly extend the lifespan of very expensive materials and frequently replaced components that have been used in harsh environments such as blast furnaces, boilers, incinerators, and fluidized beds, leading to continuous stable operations, reduced opportunity costs from long hours of operation, and decreased maintenance costs. There are clad plates and welding materials available, enabling responses to a wide range of applications for canning and hardfacing. Examples include canning for ducts, hoppers, chutes, cyclones, and hardfacing for nozzles, boiler tubes, grates, thermocouple protection tubes, and fire bars. If you have any applications you are struggling with, please consult our engineering staff.

  • IMG_2645-1.jpg
  • Special Steel
  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Core pin Material: SKH51, carbide, etc.

Core pin Material: SKH51, carbide, etc.

These are core pins made of SKH51 and carbide! They are used in injection molding molds for shaping resin parts for medical and semiconductor applications.

We would like to introduce the "core pin" handled by Sanwa Creation Co., Ltd. In addition to being used for molding resin parts for medical and semiconductor applications, it is also used for processing the head section of inkjet printers. When used in environments where the resin temperature is high during molding, it can also be manufactured from high heat-resistant zirconia ceramics. 【Specifications (partial)】 ■Material: SKH51, carbide, zirconia ceramics, ■Standards - Custom-made to your desired size, - Capable of handling shapes with multiple steps, elliptical or other irregular shapes, as well as LAP processing. *For more details, please refer to the related links or feel free to contact us.

  • サブ１.PNG
  • Other molds
  • Injection Molding Machine
  • Processing Jig
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Warm/Warm Wheel

Warm/Warm Wheel

The surface of the screw face has improved hardness due to work hardening! A gear with excellent mechanical properties.

The worms with a module of 0.5 to 2.0 for the "Warm/Warm Wheel" are produced by cold rolling. The surface roughness is finished to be below 0.8a (3.2S), making it a gentle worm for the counterpart wheel (especially for resin materials). The surface of the screw face has improved hardness due to work hardening, and since the metal fiber structure is not cut, its mechanical properties are superior compared to those produced by cutting. 【Features (excerpt)】 ■ Worms with a module of 0.5 to 2.0 are made by cold rolling. ■ The surface hardness after rolling is 1.2 to 1.3 times that of the base material. ■ The hardness of the screw face is HB240 to 260. ■ Rolled worms have a mirror-like surface roughness on the screw face, so when used in combination with a worm wheel, their lifespan is longer compared to combinations with worms produced by cutting. *For more details, please refer to the PDF document or feel free to contact us.

  • gear
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tensile strength 895 MPa! "High-strength titanium alloy"

Tensile strength 895 MPa! "High-strength titanium alloy"

A rich lineup from aerospace standards to Japan Steel Works' Super-TIX. Adopted in a wide range of fields such as battery cases and semiconductor equipment.

Our company sells "high-strength titanium alloys" that have excellent properties with a tensile strength of over 1.7 times and yield strength of over 3.8 times that of pure titanium (TP270, TP340). Among these, the AMS standard titanium alloy 64 has a tensile strength of 895 MPa, making it highly strong. We offer a wide range of options from small lots for prototypes and research to mass production. We also accommodate various processing needs such as cutting, machining, pressing, multi-angle roll forming, welding, and surface treatment, allowing us to meet diverse requests like "I only need 10mm," "I want it delivered immediately," or "I want it milled." This material is utilized in various applications such as 3D printer base plates, battery cases, semiconductor equipment, aircraft, and robot-related parts. 【We solve the following challenges】 ■ For those struggling with insufficient strength ■ For those concerned about machinability ■ For those considering weight reduction *For more details, please refer to the materials. Feel free to contact us with any inquiries.

  • alloy
  • others
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tohoku University Technology: High-Strength Co-Based Metallic Glass Alloy: T06-003

Tohoku University Technology: High-Strength Co-Based Metallic Glass Alloy: T06-003

It is an alloy with high glass-forming ability (capable of φ14mm), high machinability, and high strength (with a compressive strength of over 4000 MPa).

Metallic glass alloys, unlike conventional crystalline metals, mostly do not exhibit plastic elongation in tensile tests. Even in compositions that do show plastic elongation, they only demonstrate about 2-3% elongation, resulting in very little ductility under uniaxial stress. Therefore, plastic processing such as rolling or forging, which is common with conventional crystalline metals, is difficult. Furthermore, metallic glass alloys have higher strength compared to regular metals, with some alloys reaching up to 5000 MPa, and their machinability is not as good as that of steel. However, metallic glass alloys have the characteristic that the viscosity of the material drops sharply above the glass transition temperature, allowing for various processing techniques (viscous flow processing) in the supercooled liquid region. By utilizing viscous flow, they can become materials with excellent machinability. This invention relates to Co-based metallic glass alloys that combine good machinability, high strength, and high glass-forming ability.

  • others
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum centerless grinding material

Aluminum centerless grinding material

Is the aluminum material you are currently using really ◎? It is ideal for moving spindle CNC lathes, and its effectiveness is tremendous for parts with strict requirements for roundness and cylindricity.

<Features of Aluminum Centerless Grinding Materials> 1) High precision throughout the entire length of long materials (can also accommodate JISB0401 h5 class) 2) High bending accuracy; exceptional correction technology reduces material bending (4μm/100mm) 3) Ideal for spindle-moving CNC lathes (Peeterman), contributing to improved part accuracy, yield, and process reduction. <Advantages of Adoption> 1) Reduced variation in outer diameter dimensions; eliminates the need for stratified work on materials before processing (no need to separate into tolerance plus and minus), allowing for direct processing. 2) Improved yield; due to good material accuracy, the yield improves for parts that require higher precision. 3) Reduction in inspection processes; stable accuracy significantly enhances process capability, allowing for sampling inspection instead of 100% inspection.

  • aluminum
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High thermal conductivity magnesium 'RGM03HT'

High thermal conductivity magnesium 'RGM03HT'

Used in high heat-generating component products! Excellent high-temperature creep resistance and corrosion resistance.

"RGM03HT" is a high thermal conductivity magnesium used in high heat dissipation component products. For example, communication base station filter shells, heat dissipation lamp covers, mobile phones, communication laptops, 3C components, automotive parts, aircraft parts, etc. It has excellent thermal conductivity characteristics, with twice the thermal conductivity of commonly sold magnesium alloys, and it excels in high-temperature creep resistance and corrosion resistance. 【Features】 ■ Excellent thermal conductivity characteristics ■ Twice the thermal conductivity of commonly sold magnesium alloys ■ Excellent high-temperature creep resistance and corrosion resistance *For more details, please refer to the PDF document or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High corrosion-resistant nickel alloy "Alloy C22 (UNS N06022)"

High corrosion-resistant nickel alloy "Alloy C22 (UNS N06022)"

Widely used as materials in harsh environments, such as pharmaceutical plants and semiconductor manufacturing equipment!

Aloy C22 (UNS N06022, NW6022) is a nickel alloy with excellent corrosion resistance. It exhibits outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking in both oxidizing and non-oxidizing environments, and is widely used as a material in harsh environments such as flue gas desulfurization systems, papermaking, and waste treatment. Welding can be performed using standard welding methods similar to those for stainless steel, and post-weld heat treatment is not required. [Features] - Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking - Widely used as a material in harsh environments - Standard welding methods applicable, similar to stainless steel - Solution heat treatment temperature is 1150-1170°C, and rapid cooling is required after heat treatment *For more details, please refer to the related link page or feel free to contact us.

  • alloy
  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High corrosion-resistant nickel alloy "Alloy C276"

High corrosion-resistant nickel alloy "Alloy C276"

Welding materials use copper alloy welding materials! Post-welding heat treatment is not required.

Aloy C276 (NW0276, UNS N10276) is a nickel-based alloy that exhibits excellent corrosion resistance in both oxidizing and reducing environments. By reducing carbon and silicon, it suppresses the precipitation in the heat-affected zone and enhances corrosion resistance, making it widely used in materials for harsh environments such as chemical plants. Welding can be performed using standard welding methods similar to those for stainless steel, and welding materials should use nickel-based welding materials. 【Features】 ■ Strength at high temperatures is significantly higher than that of SUS 304 ■ Cold workability is almost equivalent to standard austenitic stainless steels such as SUS 304 and 316 ■ Solution heat treatment temperature is 1150–1170°C, and rapid cooling is required after heat treatment ■ Welding can be performed using standard welding methods similar to those for stainless steel ■ Pickling uses a mixed acid of nitric and hydrofluoric acid *For more details, please refer to the PDF document or feel free to contact us.

  • Other metal materials
  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant and corrosion-resistant alloy "Inconel expanded metal"

Heat-resistant and corrosion-resistant alloy "Inconel expanded metal"

Expandable processing is possible! It has excellent corrosion resistance to high-purity water and alkali.

At Nikken Ras Co., Ltd., we believe that our precision metal foil processing technology, developed over more than 90 years since our founding in 1924, can be utilized across a wide range of fields. "Inconel expanded metal" is a heat-resistant and corrosion-resistant alloy primarily composed of nickel, containing elements such as chromium, iron, and carbon, and is used as various processing materials. Generally, Inconel has been considered a difficult alloy to machine due to its high-temperature strength and poor thermal conductivity; however, through the establishment of processing know-how, expanded processing has become possible. We encourage you to make use of our technology in your developed products. **Features of Inconel Expanded Metal:** - Excellent oxidation resistance at high temperatures - Strong resistance to stress corrosion cracking caused by Cl- ions - Superior corrosion resistance to high-purity water and alkalis - Widely used in many chemical industries - Expanded processing made possible through the establishment of processing know-how *For more details, please refer to the PDF materials or feel free to contact us.*

  • alloy
  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-performance lead-free copper alloy "ECO BRASS"

High-performance lead-free copper alloy "ECO BRASS"

Cumulative sales performance of over 300,000 tons! Alternatives available from various metal materials! High-performance lead-free copper alloys with high strength, excellent machinability, high corrosion resistance, and wear resistance.

"ECO BRASS" is an eco-friendly material that is lead-free and has achieved excellent machinability without the addition of lead, taking into consideration both people and the planet. It is a high-performance material that, while being high-strength, excels in machinability such as cutting, forging, and casting, and also solves issues related to stress corrosion cracking and dezincification corrosion. It boasts a cumulative sales record of over 300,000 tons and a monthly output of 3,500 tons, all lead-free. Additionally, it complies with various environmental regulations, including RoHS and ELV directives, as well as JWWA standards (Japan Water Works Association standards), allowing for safe and reliable use across various fields beyond just copper alloy products. 【Applications】 ■ High-strength components related to EVs and FCVs. Bearings and sliding parts. ■ Water faucets and various fitting parts as a substitute for bronze. 【Features】 ■ High strength, excellent machinability, high corrosion resistance, and wear resistance. ■ Compliant with RoHS directive, ELV directive, and JWWA standards. ■ Can be processed into various shapes, allowing for products tailored to customer needs. ■ Does not contain environmentally harmful substances. ■ Enables miniaturization and thinning of parts, expanding design possibilities. ■ Exhibits excellent corrosion resistance and wear resistance. ■ Possesses excellent antibacterial properties. *For more details, please refer to the PDF document or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Compatible with various metals, alloys, and ceramics! "Ultrafine Particle and Nanoparticle Manufacturing Equipment"

Compatible with various metals, alloys, and ceramics! "Ultrafine Particle and Nanoparticle Manufacturing Equipment"

Non-polluting and low-cost! Increases the generation speed of ultra-fine particles and efficiently repairs! *Patent pending

The "Ultrafine Particle and Nanoparticle Manufacturing Device" is a product that utilizes forced evaporation phenomena to increase the generation rate and quantity of ultrafine particles, allowing for more efficient repair. The generation and collection sections of the ultrafine particles are connected in a closed system via pipes, and the gas used for forced evaporation circulates until the work is completed, making it environmentally friendly and economical. This leads to significant cost reductions. 【Features】 ■ Equipped with a gas filtration circulation system ■ Reduces power costs for material evaporation through forced evaporation phenomena ■ Compatible with various raw material shapes (lumps, sheets, wires, granules, etc.) ■ The used gas (hydrogen/argon) is economical due to its circulation system ■ Enables the production of clean nanoparticles due to its dry process, etc. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

  • Vacuum Equipment
  • Fine grinding machine
  • Crusher
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High value-added cobalt alloy "COBARION"

High value-added cobalt alloy "COBARION"

Cobalt alloy material with almost no Ni content, high ductility, high machinability, high strength, high corrosion resistance, and high wear resistance.

"COBARION" is a cobalt-based alloy developed by Professor Akihiko Chiba at Tohoku University’s Institute of Metal Materials and manufactured by Aiwa Co., Ltd. It features a unique technology that suppresses nickel, which can cause metal allergies, achieving excellent strength, wear resistance, and corrosion resistance. This COBARION material is highly valuable as it is less likely to cause allergies and is gentle on the human body. It is suitable for artificial joints in the orthopedic field (such as hip joints, knee joints, elbow joints) and dental applications like orthodontic wires and denture bases. COBARION is alloyed through a vacuum melting method and is supplied to the market as round bars after undergoing various heat treatment processes. [Features] - Cobalt-chromium alloy with almost no nickel content - High ductility and excellent workability - High mechanical strength, wear resistance, and corrosion resistance - Alloyed through vacuum melting - Supplied to the market as round bars For more details, please contact us or download the catalog.

  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High hardness and wear-resistant copper alloy mold material "MS40"

High hardness and wear-resistant copper alloy mold material "MS40"

Are you having trouble with burning or galling when processing titanium materials? Introducing the copper alloy mold material 'MS40', which has high hardness and excellent wear resistance!

Our company casts mold materials for deep drawing and bending processing of copper alloys. In addition to round and flat materials, we can also accommodate hollow shapes. Generally, titanium materials have low thermal conductivity, which results in less heat dissipation during processing, making them prone to burning and galling. However, MS40 has good compatibility with pure titanium and is effective in preventing galling. 【Application Examples】 ■ Bending processing ■ For the motorcycle industry (manufacturing of pure titanium exhausts for motorcycles) *For more details, please refer to the PDF document or feel free to contact us.

  • Other molds
  • Non-ferrous metals
  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High hardness and wear-resistant copper alloy mold material "MS40"

High hardness and wear-resistant copper alloy mold material "MS40"

Casting and processing of copper alloy mold material "MS40" (rough machining). Introducing applications for rough machining! *Small samples available.

Our company casts mold materials for deep drawing and bending processing of copper alloys. In addition to round and plate materials, we can also accommodate hollow shapes. Generally, molds for copper alloys are made from materials like stainless steel and titanium, which are less prone to galling during press processing. However, MS40 is a high-hardness copper alloy with excellent wear resistance, making it effective in preventing galling and seizure during deep drawing, bending, and roll forming with stainless steel and titanium. 【Application Examples】 ■ Deep Drawing: Covers for electric water heater tanks / Heating appliances / Kitchen sinks / Rice cookers ■ Bending: Manufacturing of automotive mufflers for the automotive industry IH cooking heaters / Microwave housings for the home appliance industry ■ Jigs: Jigs for straightening steel rods *For more details, please refer to the PDF document or feel free to contact us.

  • Other molds
  • Non-ferrous metals
  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Continuous casting product CAC502C old PBC2C plate

Continuous casting product CAC502C old PBC2C plate

Cutting available at the subcontractor. Delivery can also be made cut to your desired size.

CAC502C(PBC2C) board is a copper alloy continuous casting product compliant with the RoHS directive. It can be cut at an external supplier, and depending on the size, it can also be delivered cut to your desired dimensions. It has excellent corrosion resistance and wear resistance, and the lead leaching amount is very low, making it suitable for use in liners, general mechanical parts, automotive parts, and more. 【Overview】 ■Standard: JIS H 5121 ■Type: Tin bronze continuous castings, Type 2 ■Cutting: Can be cut at an external supplier ■Features: Good corrosion resistance, good wear resistance, very low lead leaching amount *For more details, please refer to the PDF materials or feel free to contact us.

  • Other machine elements
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
We accommodate contract melting of small quantities of special alloys!

We accommodate contract melting of small quantities of special alloys!

Do you have any troubles like this? The metal material you have been using has become difficult to obtain because the existing manufacturer has stopped production...

We apply the manufacturing technology of our product COBARION to offer contract melting of special alloys. We provide integrated production from melting to forging and rolling, and we are also capable of small-scale prototype development. Vacuum melting starts from the formulation of raw materials. Leveraging this strength, we can produce "customer-customized alloys" and support various research and development through metal material prototyping. 【Features】 ■ Capable of manufacturing "customer-customized metal materials" through metal melting ■ Skilled in controlling trace element composition ■ Ingots available in minimum weights of 6kg, 15kg, 30kg, 36kg, and 100kg ■ Can also accommodate subsequent plastic processing (homogenization heat treatment, hot forging, rolling, etc.) ■ We accept contract processing for hot forging and hot rolling as well. ■ We focus on short delivery times. *For more details, please download the PDF or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant and wear-resistant alloys beyond nickel-cobalt-based alloys [Flare Metal]

Heat-resistant and wear-resistant alloys beyond nickel-cobalt-based alloys [Flare Metal]

Heat resistance above 1000℃ and wear resistance with HV500! Contributes to the long life of components.

Conventional nickel-cobalt-based heat-resistant and wear-resistant alloys experience a significant decrease in hardness at high temperatures of 800°C and above, but the FREA-METAL alloy maintains excellent hardness even in ultra-high temperature ranges, in addition to possessing oxidation resistance, wear resistance, and corrosion resistance. This alloy enables the long lifespan of very expensive materials and frequently replaced components that have been used in harsh environments such as blast furnaces, boilers, incinerators, and fluidized beds, leading to continuous stable operations, reduced opportunity costs from long hours of operation, and significant reductions in maintenance costs. [Case Studies] - Clad plates and welding materials are available, allowing for canning and hardfacing for a wide variety of applications. - Canning for ducts, hoppers, chutes, cyclones, as well as hardfacing for nozzles, boiler tubes, grates, thermocouple protection tubes, and fire grates. *For more details, please contact us or download the catalog to view.

  • IMG_2645-1.jpg
  • Special Steel
  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to alloy

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.