Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 18 items
We can accommodate high-quality PVC coating in small lots and with short delivery times. Please feel free to contact us.
Dip coating is a processing method that involves applying PVC resin, which liquefies at room temperature, to the surface of metals (such as iron and aluminum) and then curing the resin through heating to form a coating.
Softness equivalent to "tires"! We also have extensive experience in construction for plating jigs and plating treatment racks.
The "Insulating Coating" boasts high electrical insulation properties, providing insulation effects for electrical equipment, construction sites, and facilities. We also have extensive experience in application for plating jigs and plating treatment racks. The application can be performed at relatively low temperatures, and the curing (masking) treatment is also relatively easy for this coating. We propose coatings tailored to customer needs, such as "wanting to suppress electrical conduction to metal substrates (workpieces)" or "wanting to prevent electric shock," using PVC, polyethylene, nylon, epoxy, and others. 【Features of PVC (Polyvinyl Chloride)】 ■ Electrical Insulation: Breakdown voltage of the coating is 12kV/mm or higher (compliant with ASTM D149) ■ Volume resistivity: 3×10^10 Ω·cm (compliant with JIS K6911) ■ Hardness (Type A durometer): 65° (compliant with JIS K6253) ■ Resin colors (basic): Black, orange, ivory, and other colors can be freely adjusted ■ Tensile strength: 13.2 MPa (megapascals; for reference, the typical water pressure of a high-pressure washer is 10 MPa) ■ Elongation at break: 392%; Tear strength: 45.3 N/mm *For more details, please refer to the PDF materials or feel free to contact us.
Introduction of case studies on solutions for surface treatment of molds, which have become a challenge due to the complexity of surface shapes.
In recent years, not only the durability of molds but also the complexity of surface shapes has made surface treatment of molds a challenge. The films formed by FCVA at NanoFilm Technologies Japan have low friction coefficients, excellent wear resistance, and release properties, solving many problems and contributing to increased productivity. 【Application Examples (Mold Surface Treatment)】 ○ Resin: ABS + 30% GF + 40% Ceramic Powder ⇒ Mold life improved by 5 to 10 times ○ Resin: PPS + 45% GF, PVC ⇒ Mold life improved by 3 to 10 times ○ Resin: Rubber ⇒ Mold life improved by 2 to 5 times For more details, please contact us or download the catalog.
Welding, tube processing, machining, inspection, everything can be done!
Our company specializes in the processing of fluororesin. In "machining," we excel in cutting fluororesins (such as PTFE and PFA) and are equipped with various machine tools, including general-purpose machines, NC machines, machining centers, and panel saws. Our skilled technicians, who are well-versed in the properties and characteristics of the materials, carry out the processing. Additionally, leveraging our long-accumulated welding technology, we can also perform "welding processing" on many fluororesin components, such as chemical containers, piping, and corner tanks. Please feel free to contact us for more information. 【Technology and Services】 ■ Machining ■ Resin Welding ■ Tube Bending ■ Inspection *For details, please contact us.
Experts in resin coating. Leave resin coating to us.
We offer resin coating services. Depending on the type of resin, we accommodate different coating methods such as flow immersion coating, mini-coating, nylon coating, and polyethylene coating. Additionally, we can also handle PVC coating (polyvinyl chloride coating) and color plating for metal parts upon request. Please feel free to contact us if you have any inquiries. 【Coating Resins We Handle】 ■ Nylon 11 ■ Nylon 12 ■ Polyethylene ■ Polyethylene Adhesion Grade *For more details, please download the PDF or feel free to contact us.
Silicone rubber can be coated onto general industrial materials!
"HT-73" is a silicone rubber and fluorine rubber lining product. Thanks to our unique processing technology, it is possible to coat silicone rubber onto various substrate surfaces. In addition to silicone rubber coating, we also handle fluorine rubber. 【Features】 - Silicone rubber lining on substrate surfaces - Easily imparts the unique high release properties and high tack of silicone rubber - Our proprietary adhesion technology allows for the molding of silicone rubber layers regardless of the substrate *For more details, please refer to the PDF document or feel free to contact us.
To protect the production equipment (substrate) that uses chemicals! Chemical-resistant coatings are very effective.
In production sites such as factories, equipment is sometimes placed in harsh environments, and it is often the case that processes proceed while using so-called chemicals (or in such an atmosphere). Our company is capable of applying surface treatments with high "chemical resistance" to protect the base of that production equipment. Coatings such as nylon and epoxy can demonstrate this chemical resistance in addition to their main performance, making the application itself very effective. [Main materials with chemical resistance] ■ Fluorine (Teflon) ■ PVC ■ PE ■ Nylon ■ Epoxy *For more details, please refer to the PDF materials or feel free to contact us.
Achieving a highly reliable coating without air entrapment in the pinhole! Metal corrosion coating for large metal pipes and metal plates.
The representative product of the Koshin Rubber Chemical Products Division, the metal corrosion-resistant coating "KS Coating," covers the surfaces of metal pipes and tubes with a seamless resin film, providing corrosion resistance through a lining technology. 【Features】 ■ Seamless processing with no joints ■ Achieves a highly reliable coating with no pinholes or air entrapment ■ Capable of accommodating complex shapes such as header pipes and perforated plates ■ Can coat large workpieces measuring 1.6m in width, 6m in length, and 1.5m in height in one go *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.
Supports a maximum width of 2m! Capable of manufacturing various composite materials. For inquiries about prototypes, please contact us.
For the manufacturing of composite materials! Hot melt, T-die laminate coating line ■ Mainly produces various composite materials using hot melt and T-dies ■ Supports widths from 1m to a maximum of 2m ■ Line speed: 1 to 10m/min ■ Coating amount: 50 to 1000g/m2 (depending on the materials and specifications used) *For more details, please refer to the PDF document or feel free to contact us.
![Shine Kogei [Ceramic Coating for Resin and Engineering Plastics]](https://image.mono.ipros.com/public/product/image/c09/2000240003/IPROS85236634268123476928.png?w=280&h=280)
Formation of a high-hardness ceramic coating on resin and engineering plastic parts through low-temperature firing by Shine Kogei.
Conventional fluororesin coatings require high-temperature firing at 400°C, making it difficult to process materials other than metals. However, Shine Kogei's ceramic coating "Cera Armor" can form a film at low temperatures, allowing the functional properties of ceramics to be imparted to materials with low heat resistance, such as resins and engineering plastics. This contributes to the long lifespan of sliding components and provides chemical resistance and corrosion prevention effects, ultimately reducing total costs. 【Processing Achievements】 ■ ABS (sensor components) ■ PET (transport components) ■ PVC・POM (food equipment parts) ■ PC (electronic device housings) ■ PEEK (jigs) ■ FRP (transport equipment exteriors) ■ CFRP (roll components) ■ Glass epoxy (jigs) ■ PP, MC nylon, polyamide, etc. ◆ Regarding Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process. 1. Properties of the material to be processed (material, shape, size, etc.) 2. Purpose of processing (e.g., removal of contaminants, slip properties, peening, etc.) * If possible, providing drawings would be beneficial for estimating costs.
Leave the water-based and solvent-based coatings to us! We can also develop products using adhesive sheets and acrylic foam materials.
At Zeon Chemical, we possess wide-width cast film production technology and high-temperature drying equipment, allowing us to perform water-based and solvent-based coating. We can also develop products such as adhesive sheets and acrylic foam materials utilizing our unique technology, including PVC cast film and foaming film technology. Additionally, we leverage the research facilities and equipment of our parent company, Zeon Corporation, for analytical support, along with over 20 years of know-how in film production and coating technology, and our own quality assurance system to meet customer needs. 【Features】 ■ Usable substrate width: 800mm to 1,500mm ■ Usable substrate thickness: 38μm to several hundred μm (negotiable) ■ Usable substrate types: PET, synthetic paper, etc. (negotiable) ■ Coating method owned by us: Comma coating ■ Usable line speed: 5 to 30m/min *For more details, please refer to the related link page or feel free to contact us.
We offer wide and long polyurethane foam coating.
〇 Foam polyurethane coating line ■ Produces various foam composites using a two-component mixed foam polyurethane ■ Supports wide rolls up to 4m in width
Shortest half-day estimate / SUS304 / Wire processing / Fluororesin (Teflon) coating
Introduction of processed parts achievements! 〇 Material: SUS304 〇 Processing method: Wire processing 〇 Surface treatment: Fluororesin (Teflon) coating These are wire-processed products made from SUS304. Wire processing allows for high-precision machining even for complex shapes. It enables the creation of products without knife R that cannot be processed with end mills, and by moving the upper and lower wires separately, taper shapes can also be machined. It is also possible to apply key grooves or finish with gear-cutting shapes. For surface treatment, a fluororesin (Teflon) coating is applied, which possesses properties such as non-stick, slip resistance, insulation, wear resistance, heat and cold resistance, etc. In this way, our company can provide one-stop solutions for processing, treatment, and inspection. We have production achievements in various industries, including industrial machinery, semiconductors, electronic devices, machine tools, printing machinery, construction machinery, etc. We specialize particularly in small quantities of various types, prototype parts, and development parts. We can handle everything from metals to plastics! Please leave the cutting processing of prototype and development parts to us. For company information and product details, please refer to the catalog available for download below, and feel free to contact us if you have any questions.
It is a durable PVC lining processing technology with corrosion resistance and durability aimed at heavy anti-corrosion of various metal structures.
We cover the metal surfaces of pipes and other materials with resin for corrosion protection. There are no pinholes or air entrapment, and strength is maintained. *For more details, please refer to the PDF document or feel free to contact us.
Various types of insulation coatings for bus bars are also available!
We can also accommodate the "insulation coating" for busbars★ We can propose both fluid immersion coatings and electrostatic powder coatings, including Sumi tubes, nylon coatings, heat shrink tubes, PVC, epoxy, and TFI coatings! If you have any concerns regarding busbars, please consult "Seiko Industry of Technology" once.
