Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 212 items
A robotic hand that inserts and removes wafers to and from a carrier without contact.
Wafers can be transported non-contact. The thin hand allows for the insertion and removal of wafers to and from the carrier. Usable in a clean room. Alignment is possible.
Non-contact robotic hand
By ejecting gas, it generates negative pressure through the ejector effect and Bernoulli effect, and positive pressure through the pressure-type air cushion effect, allowing the workpiece to be suspended in a non-contact state, enabling transport, inversion, and tilting. It is also referred to as a Bernoulli chuck. The exhaust recovery mechanism allows for use in ultra-clean rooms. It is compatible with semiconductor wafers, LCD/PDP glass substrates, printed circuit boards, ceramic substrates, films, paper, non-woven fabrics, ultra-thin workpieces, breathable workpieces, and more.
Foot-operated hydraulic table with mat Hand lift cart Model number M227LFMA-S150T
Using a press cart's loading board on the table, it prevents scratches on the workpiece due to the PVC mat. A spring-back mechanism has been added to the release handle (table lowering device). In case of an emergency, simply releasing your hand will stop the descent. Equipped with a highly durable pump and a robust cylinder, it ensures safe and comfortable lifting and lowering.
Electric lifting and running hand pallet truck 1.5TON standard (L1150×W550mm) Model number M4148HT15J-1150-550ST
Lithium battery, maintenance-free Brushless drive motor, maintenance-free 5S battery replacement Error code display Perfect after-sales service and accessory service Built-in charger is standard equipment
Compatible with workpieces that could not be transported with conventional suction pads! Double-structured vacuum pad!
The "SGH Series" is a vacuum pad from Myotoku, which manufactures and sells vacuum equipment, pneumatic equipment, and electronic devices. It accommodates workpieces that could not be transported with conventional suction pads. It can grip a variety of workpieces, including bagged powders (liquids), cardboard, wavy workpieces, and workpieces with irregularities. We offer sizes "90×150," "120×200," and "150×250." 【Features】 ■ Accommodates workpieces that could not be transported with conventional suction pads ■ Grips a variety of workpieces, including bagged powders (liquids), cardboard, wavy workpieces, and workpieces with irregularities ■ The unique foam material pad adheres to the workpiece (outer edge) ■ The three-stage bellows rubber pad securely grips the workpiece (center) ■ Available in three sizes *For more details, please refer to the PDF document or feel free to contact us.
Suitable for vacuum adsorption of various shapes and sizes! Just supply compressed air to the inlet port!
The "SGB Series" is a new structure hand that can suction and transport workpieces that could not be grasped before. Thanks to the built-in combum (vacuum ejector), it operates easily by simply supplying compressed air to the supply port. It can utilize the exhaust during vacuum generation of the combum without waste. 【Features】 ■ Suction and transport of workpieces that could not be grasped before ■ Built-in combum (vacuum ejector) ■ Easy operation by simply supplying compressed air to the supply port ■ Introduces exhaust air from the combum into the rubber membrane, expanding it like a balloon ■ Efficiently utilizes the exhaust during vacuum generation of the combum *For more details, please refer to the PDF document or feel free to contact us.
Energy-saving with a power consumption of 4W! Can be used for collaborative and cooperative robots with a carrying capacity of 0.5 to 3 kg.
The "SGE Series" is a product that eliminates the need for air piping to the compressor by incorporating a built-in small vacuum pump. It has been made compact and lightweight to be used with collaborative robots that can carry 0.5 to 3 kg. The main body weighs 260g. We offer a flange that can be directly attached to small collaborative robots. 【Features】 ■ Airless operation ■ Energy-saving ■ Compatible with small robots ■ Compact and lightweight *For more details, please refer to the PDF document or feel free to contact us.
An actuator that electrically grips the workpiece by combining a two-phase stepping motor and a linear guide. It can grip the workpiece even in environments without an air source.
1. Slim shape: The thickness of the main body has been made slim. This allows for a reduction in overhang, achieving a smaller robot size. 2. Standard hollow hole: The main body is equipped with a standard hollow hole in the center. Various customizations are possible, such as passing cylinder rods or air tubes through it. 3. Direct mount installation. 4. Equipped with high rigidity and high precision guides. 5. Peace of mind in case of disconnection: Built-in connectors allow for immediate resolution by replacing the relay cable (robot cable). 6. The controller supports both CC-Link remote device type and point input type, which can be selected.
Achieving a lightweight and high-strength body with high float functionality through CFRP laminated molding - a deburring hand for collaborative robots that facilitates teaching.
The floating deburring hand is a collaborative robot hand designed to grip deburring tools. It uses CFRP laminated components, offering a high strength-to-weight ratio, and allows for the creation of free shapes that are impossible to produce with conventional processing methods. It features a lightweight, high-strength body and a high-float mechanism that does not require a drive source. It can follow complex workpieces and stably remove burrs, significantly reducing the time required for teaching.
Achieving a hand shape that fits the workpiece with "lightweight materials" + "molding technology" - a transport hand that pursues lightweight design and freedom of movement.
The transport hand is a collaborative robot transport hand designed to carry a wide variety of workpieces. It uses CFRP laminated molded parts as its components. It has a high strength-to-weight ratio and can create free shapes that are impossible to manufacture with conventional processing methods. Along with a lightweight and high-strength body, the hand shape can be freely customized to fit the workpiece. This enables the automation of transporting a diverse range of workpieces.
Manual cleaner that is highly effective in the kitchen, bathroom, and balcony.
The low-cost drain cleaning tool series "Value Snake." It comes with a simple automatic feeding device. Additionally, it can be rotated with a commercially available electric drill, allowing for efficient cleaning.
Thin, with excellent elasticity and stretch, fitting perfectly on the hand. Gloves that are easy to put on.
The latex gloves "Micro Hand CR" are high-quality gloves that fit perfectly on the left and right hands. They are designed to match the shape of Japanese hands and feature a unique curved finger type that reduces fatigue. For more details, please contact us.
High rigidity and high precision mechanical hand utilizing linear guides.
◆Mechanical hand that does not require air piping ◆Grip based on spring force (L: weak, M: medium, H: strong) ◆Lever opening is activated by external force ◆Capable of gripping with long points and overhangs ◆Installation accuracy has been improved between the main body and guide, making it even easier to use
