We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for inspection.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

inspection(ut) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

inspection Product List

1～30 item / All 38 items

Displayed results
Non-destructive inspection with a drone: "UT inspection payload for ELIOS 3"

Non-destructive inspection with a drone: "UT inspection payload for ELIOS 3"

Non-destructive testing (UT inspection | ultrasonic thickness measurement) is possible with drones.

The UT inspection payload is a device developed in collaboration with Cygnus Instruments, a world-leading manufacturer of ultrasonic thickness gauges, by Flyability, the company that developed the "ELIOS 3," a drone capable of flying safely in indoor spaces. By using the ELIOS 3 equipped with the UT inspection payload, ultrasonic thickness measurements can be conducted remotely, safely, efficiently, and at low cost in inspection areas that traditionally required scaffolding or special equipment, such as plant facilities, infrastructure facilities (road bridges, tunnels, sewers, etc.), automotive and aircraft factories, and shipyards.

  • probe
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Testing (UT)

Ultrasonic Testing (UT)

It is used for the inspection of butt welds in piping, tanks, and steel frames, as well as for the material inspection of rolled steel!

"UT" is an ultrasonic testing method that uses ultrasound to detect internal defects. It is highly portable but can be easily affected by the material, and depending on the type of material and the defects to be detected, the creation of test specimens may be necessary. It is used for inspecting butt welds in piping, tanks, and steel structures, as well as for testing rolled steel materials. [Features] - Detects internal defects using ultrasound - Excellent portability - Usable for inspecting butt welds in piping, tanks, and steel structures, as well as for testing rolled steel materials *For more details, please refer to the related links page or feel free to contact us.

  • Contract Inspection
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Phased Array Ultrasonic Testing (PAUT) Method

Phased Array Ultrasonic Testing (PAUT) Method

With electronic scanning, inspection is possible even in areas where mechanical scanning is difficult!

The "Phased Array Ultrasonic Testing (PAUT) method" is a technique that electronically controls numerous ultrasonic transducers within an array probe to set the propagation direction and focal position of the ultrasonic beam according to the inspection objectives. Since the received waveform data is visualized, it is easy to confirm the presence or absence of defects and to measure their dimensions accurately. 【Features】 ■ Inspection is possible even in areas where mechanical scanning is difficult due to electronic scanning. ■ By saving all flaw detection waveform data, objective and continuous evaluation is possible. ■ By overlaying CAD drawings onto PAUT images, results that are easy to interpret can be provided. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Contract Inspection
  • Contract measurement
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japan-China Non-Destructive Testing Co., Ltd. "Non-Destructive Testing" Information

Japan-China Non-Destructive Testing Co., Ltd. "Non-Destructive Testing" Information

We conduct various non-destructive testing!

At Chūnichi Non-Destructive Testing Co., Ltd., we conduct "non-destructive testing" for inspections of welds in pipes and pressure vessels. Mainly, we offer services such as "Radiographic Testing (RT)", "Ultrasonic Testing and Thickness Measurement (UT・UTT)", and "Penetrant Testing (PT)", with various examples of inspection targets. Our team of nine certified X-ray technicians provides friendly, careful, and reliable service, so please feel free to contact us. 【Examples of Inspection Targets】 ■ Welds in pipes and pressure vessels ■ Cast and forged products ■ Welds in all types of metals, etc. *For more details, please refer to our catalog or feel free to contact us.

  • X-ray inspection equipment
  • Other inspection equipment and devices
  • Contract Inspection
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Quality Assurance [Non-Destructive Testing]

Quality Assurance [Non-Destructive Testing]

We provide various inspection services such as visual inspection, dimensional inspection, non-destructive testing, and three-dimensional measurement. [Equipped with over 20 types of inspection equipment]

We promise to deliver "peace of mind" and "trust" through inspections, providing our customers with comprehensive quality assurance. 【Precision Dimension Measurement】 We are equipped with numerous measuring devices to accommodate measurements of various products. Areas that cannot be measured directly can also be assessed using three-dimensional measuring machines. 【Visual Inspection】 We check for surface defects such as foreign substances, dirt, scratches, burrs, chips, and deformations, and make judgments on the quality. 【Non-Destructive Testing】 Ultrasonic Testing (UT) Magnetic Particle Testing (MT) Liquid Penetrant Testing (PT) We offer three types of non-destructive testing and can also issue various certificates. We accommodate requests for inspection only, on-site inspections, and drop-off inspections, as well as comprehensive production from materials to finished products. We provide a wide range of services including materials, heat treatment, lathe work, machining, polishing, and inspection. We will make suitable proposals for our customers. For all your manufacturing needs, please trust Sanri Special Steel Co., Ltd.! *For details on inspection equipment and facilities, please refer to our inspection service catalog.

  • Other machine elements
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explanatory Material: "Non-Destructive Testing You Can Ask About Now"

Explanatory Material: "Non-Destructive Testing You Can Ask About Now"

A clear introduction to the basics of penetrant testing and magnetic particle testing.

Our company, which manufactures and sells flaw detection devices for non-destructive testing, is currently offering explanatory materials on "Penetrant Testing (PT) Method and Magnetic Particle Testing (MT) Method." We provide a clear introduction to their respective characteristics and principles, types of penetrants and testing agents, and examples of inspection targets. [Contents] ■ Representative testing methods for non-destructive testing ■ Characteristics and principles of Penetrant Testing (PT) Method ■ Characteristics and principles of Magnetic Particle Testing (MT) Method *For detailed information, please refer to the "PDF Download." We are also currently showcasing a video introducing the demo units of our penetrant testing devices.

  • Contract Inspection
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fuji Electric Industry Co., Ltd. Business Introduction

Fuji Electric Industry Co., Ltd. Business Introduction

Responding to trust with reliable technology! Fujii Electric Industry Co., Ltd.

Fujii Electronics Industry Co., Ltd. has been providing trusted services (non-destructive testing, inspection, testing, heat treatment work, etc.) to customers since its establishment in 1966, with the motto of ensuring that equipment and products can be used with confidence. We practice business activities that "respond to trust with reliable technology," and we have adopted the ISO 9001 quality management system, establishing and implementing comprehensive quality control. 【Business Activities】 ■ RT (Radiographic Testing) ■ UT (Ultrasonic Testing) ■ PT (Penetrant Testing) ■ MT (Magnetic Particle Testing) ■ ET (Eddy Current Testing), etc. *For more details, please refer to our catalog or feel free to contact us.

  • Contract Inspection
  • Other inspection equipment and devices
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NDK Non-destructive Testing Equipment Magnetic Particle Inspection / Penetrant Testing etc.

NDK Non-destructive Testing Equipment Magnetic Particle Inspection / Penetrant Testing etc.

A reliable and extensive lineup of non-destructive testing that meets customer needs.

Non-destructive testing refers to the process of determining the presence and extent of defects on the surface or inside various materials, including metals, without damaging the object. This process is used to assess whether the object meets standards or specifications, determining if it is acceptable or not. The act of searching for defects is called flaw detection. The application fields of non-destructive testing span a wide range, including inspection during the manufacturing of materials, equipment, and structures, as well as maintenance inspections conducted after operation. For more details, please contact us or refer to the catalog.

  • Other inspection equipment and devices
  • Defect Inspection Equipment
  • Visual Inspection Equipment
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CXR Inc. Business Introduction

CXR Inc. Business Introduction

Leave your inspection and development projects to us!

CXR Corporation is a company primarily engaged in inspection and development businesses. In particular, our inspection technology is widely adopted in the energy industry, including electricity, gas, and oil, as well as in core industrial sectors of our country such as petrochemicals, steel manufacturing, papermaking, shipbuilding, and electrical equipment manufacturing. We are expanding our diverse inspection operations and enhancing our technical capabilities, as well as our "inspection power," to contribute to ensuring "safety and security" in society through our inspections. We aim to be a company that our customers can trust. 【Business Introduction】 ■ Inspection Business ■ Development Business ■ Instrumentation Business *For more details, please refer to our catalog or feel free to contact us.

  • Other analytical and testing equipment
  • Other measurement and measuring equipment
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Business Introduction] Non-Destructive Testing

[Business Introduction] Non-Destructive Testing

Diagnosing with a scientific eye without breaking things! We meet our clients' needs with high technology.

Withsol Co., Ltd. is dedicated to supporting and protecting industrial infrastructure such as plants and power generation facilities, social infrastructure that is essential for daily life, and Japan's manufacturing, which is a source of pride for the world, through rigorous quality control and safety assurance. We are committed to continuous technical training and the development of new technologies and new equipment. "Non-destructive testing," which diagnoses without damaging objects, meets the needs of clients with unique equipment and high-level technology to ensure the maintenance of highly public facilities and the integrity of manufactured products. [Features] ■ Diagnosis with a scientific approach without damaging objects ■ Responding to client needs with unique equipment and high-level technology *For more details, please refer to the PDF materials or feel free to contact us.

  • Contract Inspection
  • others
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-destructive testing equipment: Achieving reduced inspection time and uniform accuracy in product inspection.

Non-destructive testing equipment: Achieving reduced inspection time and uniform accuracy in product inspection.

Reliability of inspection equipment from a penetrant manufacturer. Testing with demo units is also possible! Providing various types of flaw detection inspection equipment such as penetrant, magnetic particle, and ultrasonic testing to many industries.

This device is designed to inspect a wide variety of inspection items, from steel materials to small screws, with uniformity and high precision in terms of size, quantity, shape, and material. Non-destructive testing is essential for products and parts that may suffer significant damage after delivery. We hope this will contribute to enhancing the competitiveness and quality of your products. *Note: Fluorescent penetrant testing equipment may also be referred to as Zygro, Keitan, or PT, while magnetic particle testing equipment may be called Jikitan, among other names. The shapes and sizes of the devices vary, and we design and manufacture equipment that meets customer needs, including manual and automated inspection and transportation processes. The basic design features a side-by-side layout of each work booth, allowing for flexible arrangements such as L-shaped or U-shaped configurations to effectively utilize your valuable workspace and human resources. We also offer simplified models, such as those with only a washing station and dryer. We are always open to consultations regarding inspection methods, so please feel free to reach out. We will provide proposals, including whether or not the equipment is necessary. Additionally, we are always accepting requests for the use of demonstration units.

  • Defect Inspection Equipment
  • Other inspection equipment and devices
  • Flaw detection testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inspection AI Development Application "MENOU-TE"

Inspection AI Development Application "MENOU-TE"

By using "MENOU-TE," complex inspections can be easily automated with simple operations.

『MENOU-TE』 is an application designed to automate complex inspections and quality checks using AI, without requiring specialized knowledge, solely through GUI operations. By using this product, tasks that previously took AI engineers several months can now be completed by anyone in just a few hours. It provides an essential development environment for operating inspection AI. 【Features】 ■ No specialized knowledge of AI required (no programming) ■ Selection, teaching, learning, accuracy verification, and inspection settings for AI can all be completed within a single application ■ Capable of automating complex inspections with AI ■ Allows for the addition of inspection conditions to AI output results ■ Concise project management ■ Quickly find the desired images *For more details, please download the PDF or contact us.

  • Other network tools
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
We offer contract services for micro-focus X-ray CT non-destructive testing.

We offer contract services for micro-focus X-ray CT non-destructive testing.

Inspection possible with high-vision, high-resolution, high-contrast three-dimensional perspective images.

〇Development of laser construction methods and various analysis equipment for proper advancement (36 minutes) https://www.youtube.com/watch?v=aU0xllIS_xY 【X-ray generator】 　Maximum tube voltage: 225kV 　Maximum tube current: 1000μA 【Maximum input resolution】 　Approximately 14 million pixels 【Compatible work size】 　φ400mm × height 330mm, maximum 12kg

  • Other inspection equipment and devices
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
AI image recognition is changing inspections. Visual inspections are outdated now. 'Hutzper'

AI image recognition is changing inspections. Visual inspections are outdated now. 'Hutzper'

We will solve the labor shortage with fast, cheap, and skilled AI.

Inspector B: "Today, the three of us are doing a visual inspection of the bottled products. Wow, we have to check 10,000 bottles today; this is going to be tough... I wonder if we can get through all of it." Inspector C: "(Wow, there's a lot to inspect today... This is going to be a test of stamina.) B, we have a lot to check today! Let's do our best!" Inspector D: "Let's do our best! There are a lot of bottles, so we need to make sure we don't overlook any defective products." (Three days later) Quality Control Department Head: "Hey! There was a defect in the shipment from three days ago! What is going on with the inspections!!!" The three inspectors: "We are so sorry!!!!" 'Hutzper' offers a one-stop solution from proposing the use of AI image recognition to conducting proof-of-concept experiments, implementing models, and operational deployment. By entrusting inspections, such as visual checks done by human eyes, to AI, we can address labor shortages and improve accuracy.

  • Image analysis software
  • Other image-related equipment
  • Image Processing Software
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
We offer contracted services for X-ray non-destructive testing.

We offer contracted services for X-ray non-destructive testing.

- X-ray generator with a maximum voltage of 300kV can capture images of carbon steel approximately 50mm thick. - Detection range: 325mm × 264mm.

A system equipped with two sets of X-ray generators: a "300kV X-ray generator" and a "90kV μ-focus X-ray generator." The "300kV X-ray generator" is intended for radiographic inspection of steel samples. The "90kV μ-focus X-ray generator" has a focus size of 12μm and is intended for radiographic inspection of light element samples such as aluminum.

  • Other inspection equipment and devices
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welding position detection sensor 【Makome Research Institute】 Metal Non-destructive Testing

Welding position detection sensor 【Makome Research Institute】 Metal Non-destructive Testing

Detects welding positions that cannot be identified by visual inspection or image sensors using eddy currents. Detection is possible even under paint or plating (gold plating).

This product is an eddy current welding position detection sensor that utilizes changes in eddy currents at the target welding position. This product consists of a detection sensor (hereinafter referred to as the sensor) and a controller. The sensor converts the eddy current detection signal into a digital signal and communicates with the controller via serial data. The controller performs signal processing and threshold comparison. The comparison result is output as a switch signal. *If you lend us a workpiece, we will investigate whether it can be detected free of charge. Please feel free to contact us.

  • 溶接検知構成イメージ.png
  • Sensors
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inspection and Diagnosis Services for Plant Equipment and Structures

Inspection and Diagnosis Services for Plant Equipment and Structures

Introducing methods such as the "phased array method," which makes it easy to identify the three-dimensional positions of detected defects!

Our company provides various measurement services for different structures, utilizing a range of methods from general non-destructive testing to inspections and diagnostics using specialized techniques. We are always striving to propose suitable inspection methods, including the consideration of inspection methods tailored to the target objects and the development of new inspection techniques. In our "Plant Equipment and Structural Investigation and Diagnosis Services," we offer services such as the "Phased Array Method," which makes it easy to identify the three-dimensional positions of detected flaws (in-plane and thickness directions), as well as the "AUT System." 【Service Menu】 ■ Phased Array Method ■ AUT System ■ 3D Laser Scanning System / Coke Drum Maintenance Inspection ■ Remaining Life Diagnosis Technology for Coke Drums ■ 3D Laser Scanning System / Coke Oven Body Measurement *For more details, please refer to the PDF document or feel free to contact us.

  • Other services
  • Other contract services
  • Contract Inspection
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Grinder finishing, fan, can manufacturing welding, non-destructive testing.

Grinder finishing, fan, can manufacturing welding, non-destructive testing.

In the heavy electrical and machine tool industry! We have installed 5 blades on a 6.0t × 160 × 125 φ540.

We manufactured R195 fan blades, performed can welding, grinder finishing of the welds, non-destructive testing of the welds, and dimensional inspection. Five blades were attached to a 6.0t×160×125, φ540. The industry is heavy electrical and machine tools. 【Processing Overview】 ■ Material: Steel ■ Lot: 1 piece (single item) ■ Precision: Within general tolerance range *For more details, please refer to the related link page or feel free to contact us.

  • Processing Contract
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SUS304 stainless steel tank, watertight welding, water pressure test

SUS304 stainless steel tank, watertight welding, water pressure test

For the machine tools, production equipment, and food machinery industries! We can accommodate a wide range of processing.

We have performed canning, watertight welding, pickling, and water leakage testing on a tank made of SUS304. Watertight welding is commonly used in similar products such as tanks for production equipment, machine tools, and food processing machines. Please feel free to contact us when you need our services. 【Processing Overview】 ■Industry: Machine tools, production equipment, food machinery ■Material: Stainless steel ■Lot: 1 piece (single item) ■Precision: Within general tolerance range *For more details, please refer to the related link page or feel free to contact us.

  • Processing Contract
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flange installation, thick plate welding, back gouging welding, beveling, annealing, NDI inspection.

Flange installation, thick plate welding, back gouging welding, beveling, annealing, NDI inspection.

Complete welding and non-destructive testing have many achievements! Please feel free to contact us.

We performed the installation of STKM13A×50.0t×φ450 flange. We carried out a 45° bevel, back gouging welding, PT inspection, and annealing work, followed by MT inspection before sending it to the machining manufacturer. We have extensive experience in complete welding and non-destructive testing, so please feel free to contact us. 【Processing Overview】 ■ Material: Steel, Aluminum, Stainless Steel ■ Lot: 1 to 100 pieces ■ Precision: Within general tolerance range ■ Industry: Heavy electrical, Production equipment *For more details, please refer to the related links page or feel free to contact us.

  • Processing Contract
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
For allergen wipe tests! "Allergen Eye Quick"

For allergen wipe tests! "Allergen Eye Quick"

10 minutes until the test results come out! Check for allergen residues on the food production line! For food allergen management under HACCP, ISO, and FSSC!

"Allergen Eye Quick" is a kit that allows for quick and easy confirmation of food allergen residues on food manufacturing lines. There are kits available for recommended items such as soy and sesame, allowing you to gather the kits for the allergens you wish to test from the Allergen Eye series. 【Features】 ■ Testing is as simple as directly dipping into a wiping solution or rinsing water (dilution required) ■ Determine the presence or absence of food allergens after 10 minutes ■ There are small packs (for 5 tests) available, so you can feel secure even if testing frequency is low. ■ The small pack comes with a buffered cotton swab, allowing for wipe tests with just this one item. ■ A wide range of products available 【Product Lineup】 ◎ Egg ◎ Milk (Casein) ◎ Wheat ◎ Buckwheat ◎ Peanut ◎ Crustacean ◎ Soy ◎ Sesame 【About Product Expiration Dates】 This product is shipped with an expiration date of at least three months. Since the expiration date varies for each product at the time of shipment, please contact us if you need to confirm it. *For more details, please request materials or view the PDF data available for download.

  • Other measurement, recording and measuring instruments
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Damage investigation (building inspection)

Damage investigation (building inspection)

Over 30 years of experience and achievements! We conduct investigations quickly and carefully with our in-house developed system.

A construction damage survey (building survey) refers to the investigation of the impact of ground vibrations caused by construction work. It is a current condition survey conducted before the start of construction to prevent disputes with the owners of surrounding buildings. Survey contents include: - Damage from cracks and gaps in external, internal, and exterior structures - Measurement of inclinations in columns and thresholds - Level measurements of buildings and structures In the event that damage occurs, we will conduct an investigation based on the pre-construction survey materials and provide comparable documentation. We are committed to creating a smile-inducing community while considering the people around the construction site. Overview video > https://www.youtube.com/watch?v=Yoyku1Vzg1A

  • Contract Inspection
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Phase One】Advanced flare stack inspection using drones

【Phase One】Advanced flare stack inspection using drones

Understanding the details from a safe distance! We will introduce inspection case studies.

This article is a Japanese translation of "Using Advanced Drone Solutions for Flare Stack Inspection," published on the website of Phase One (Denmark). The Belgian inspection service provider "SkyeBase" has extensive experience in assisting infrastructure asset owners and maintenance managers in managing critical infrastructure assets through inspections utilizing drones and sensors. *For more details, please refer to the PDF document or feel free to contact us. The detailed content of the article can be viewed through the related links.

  • 5.PNG
  • 6.PNG
  • 7.PNG
  • Color camera
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-destructive testing "Ultrasonic Testing (UT)"

Non-destructive testing "Ultrasonic Testing (UT)"

We are confident in our technical capabilities. We play a role in ensuring safety and reliability through non-destructive testing. Leave it to the professionals who hold numerous technical qualifications.

Ultrasonic Thickness Measurement Ultrasonic thickness measurement is a method of measuring the thickness of an object from one side using ultrasonic waves. It is typically measured with a specialized device called an ultrasonic thickness gauge. Ultrasonic waves are sent from the measurement surface of the object, and the time it takes for the reflection from the opposite side to return is measured and converted into thickness. A sensor called a transducer (probe) is used to transmit and receive the ultrasonic waves. ◎ Implementation of Ultrasonic Thickness Measurement Ultrasonic thickness measurement is conducted in accordance with the standard "Thickness Measurement Method Using Ultrasonic Pulse Reflection" (JIS Z 2355). Furthermore, the standard states that "the person conducting the measurement must possess the necessary qualifications or equivalent sufficient knowledge, skills, and experience." The "necessary qualifications" referred to here typically means individuals certified in ultrasonic testing by the Japan Non-Destructive Testing Association. *For more details, please contact us or refer to the catalog.

  • Visual Inspection Equipment
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clean Room Filter Inspection ScanAirPro System

Clean Room Filter Inspection ScanAirPro System

It is a system based on a particle counter that can perform sampling on the upstream side as well as scanning on the downstream side of the filter.

The ScanAir Pro system is a scanning system based on a particle counter that allows for leak testing of HEPA/ULPA filters, as well as PTFE (Teflon), fiberglass, and other filter media. It is a simple and lightweight system unit. Not only does it check for leaks, but it also measures filter efficiency and serves as a system for scanning the filter media as part of cleanroom recovery testing.

  • Company：SGY 本社
  • Price：1 million yen-5 million yen
  • Particle Counter
  • probe
  • Other environmental analysis equipment
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-destructive testing of ultrasonic flaw detection "Phased Array Testing"

Non-destructive testing of ultrasonic flaw detection "Phased Array Testing"

Pioneering corrosion inspection!! It enables extensive inspections in a short time and allows for quantitative evaluation of damage and corrosion in steel materials!

Our company provides non-destructive testing technology services in the manufacturing stage, playing a role in ensuring safety and reliability. Phased array inspection utilizes ultrasonic flaw detection methods, eliminating the need for surface preparation such as paint removal or rust cleaning, and allows for evaluation after data collection! It also excels in workability compared to conventional ultrasonic devices! (*Using Olympus model [Olympus Omniscan-MX2]) 【Features】 ◆ Reduction of inspection time 　⇒ Linear scanning allows for inspection of a wide area at once without physically moving the probe. ◆ No surface preparation required for paint or rust removal 　⇒ Since it is an ultrasonic inspection, it can be conducted without altering the existing item. ◆ Clear reporting with images 　⇒ Equipped with a high-resolution large 10.4-inch touch screen, it also features high-speed data transfer capabilities. ◆ Quantitative evaluation of steel thickness reduction 　⇒ It can map the distribution of wall loss in pipes due to corrosion, wear, and erosion. 【Adoption Cases】 For more details, please contact us or download our catalog to view.

  • Contract Inspection
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Semiconductor Testing [Contact Probes, IC Sockets, Probe Cards]

Semiconductor Testing [Contact Probes, IC Sockets, Probe Cards]

Support for inspection of various electronic components! Precision research of TOTAL TEST SOLUTION!

This is an introduction to Seiken Co., Ltd., which handles contact probes used for electrical testing, semiconductor wafer inspection probe cards, and IC sockets. We offer a lineup of products including "contact probes" that cater to both standard and special specifications, "IC sockets" that can be configured with housing materials suited to specific applications, and "probe cards" that accommodate various inspection conditions, including narrow pitch through fine processing technology. Examples of inspection conditions: - Support for narrow pitch (MIN P=80μ) - High current testing (pre-process testing of IGBT devices) - Non-magnetic testing (probes made from non-magnetic materials) Leveraging the technology we have cultivated over many years, we continue to develop solutions that provide a more efficient inspection environment and meet more detailed requests. An overview of our products is available in the documentation. [Contents] ■ Introduction ■ Product and technology introduction (Contact Probes) - Introduction of new product technology ■ Technology introduction (IC sockets, probe cards) ■ Other various products and services (precision processing, etc.) *For more details, please refer to the PDF document or feel free to contact us.

  • Other semiconductors
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Through and Stop Screw Gauge" Plastic Resin Screw Inspection

"Through and Stop Screw Gauge" Plastic Resin Screw Inspection

"Through and Stop Thread Gauge" Plastic Resin Screw Inspection! We will teach you the method for inspecting plastic resin screws in a video!

We are a company specializing in plastic resins. We primarily perform machining by skillfully using general-purpose lathes, milling machines, NC lathes, and machining centers to cut round and sheet materials from raw materials. In cutting processes, we handle a wide range of operations including three-dimensional processing and complex lathe processing using CAD/CAM, as well as engraving and gear manufacturing. In thermal processing, we perform welding and bending, and in manual processing, we offer polishing (buffing), adhesion, and assembly. Additionally, we handle secondary processing of molded products, as well as processing of rubber, metals, non-ferrous materials, felt, and insulation boards. Before delivery, we conduct inspections using calipers, micrometers, pin gauges, block gauges, screw gauges, image dimension measuring devices, three-dimensional measuring machines, and jigs to measure and check the items against the drawings. We pay close attention to dimension changes due to temperature differences, expansion due to water absorption, and distortions or warping related to shape and material, striving to meet your requests as much as possible. We hope you will get to know our company and gain a deeper understanding of our current operations. We will be distributing videos through YouTube that contribute to the development of manufacturing, so we appreciate your support. *For more details, please refer to the PDF materials or feel free to contact us.*

  • Processing Contract
  • plastic
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to inspection

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.