molding Product List and Ranking from 373 Manufacturers, Suppliers and Companies

Foam Styrene Molding Surface Coating Molding

You can combine the performance of expanded polystyrene with design and durability!

"Surface Coating Molding" is a technology that optimizes the mold temperature conditions during molding to achieve (1) the fusion of beads and (2) the melting and solidification of the product surface within one cycle, forming a coating of approximately 0.1mm to 2.0mm on the product surface. With a hard coating layer, it is possible to maintain the performance of expanded polystyrene (lightweight and thermal insulation) while combining aesthetics and durability. Traditionally, a separate sheet (such as resin) was required for the surface, but with this technology, molding can be done using only expanded polystyrene, allowing for the use of a single type of expanded polystyrene mold, which reduces initial costs. [Features] ■ Forms a coating of approximately 0.1mm to 2.0mm on the product surface ■ Can combine aesthetics and durability ■ Easy to separate for recycling due to being a single material ■ Allows for the use of a single type of expanded polystyrene mold, reducing initial costs ■ Easy to achieve clean printing on the surface ■ Various "embossed patterns" can also be processed *For more details, please refer to the related link page or feel free to contact us.

Company：旭化成本社・本社工場
Price：Other

Contract manufacturing
Processing Contract
Other polymer materials
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Foam insert molding

There are examples of production such as insert molding that does not compromise appearance and complete insert molding of vacuum insulation materials!

Asahi Kasei Corporation offers "Foam Insert Molding." The outer foam polystyrene can be shaped freely, such as with inlays, through bead molding. By protecting the vacuum insulation material with foam polystyrene, the need for separate parts for protection is eliminated, contributing to cost reduction and improved assembly workability. 【Features】 ■ Vacuum insulation material can be molded in a hollow position within the foam ■ Compatible dimensions: 1200mm T20 and above ■ Thermal conductivity: 0.002 W/m·K ■ Reduces the labor involved in parts management *For more details, please refer to the PDF document or feel free to contact us.

Company：旭化成本社・本社工場
Price：Other

Contract manufacturing
Processing Contract
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powder Injection Molding (MIM, CIM) Technical Support Services

Leave the technical support for powder injection molding and nitride ceramics to us.

Our company provides technical support for powder molding processing (ceramics and metal materials). We offer support for the selection of molding materials (powder and binder), mold design, molding technology, debinding, sintering processes, and post-processing techniques. Please feel free to consult us if you have any requests. 【Features of Powder Injection Molding Technology】 ■ Capable of mass-producing complex-shaped products ■ Suitable for large-scale production ■ Less material loss in post-processing compared to other methods ■ Capable of molding holes with an inner diameter of approximately 100μm ■ Difficulties in defects and density differences within the product ■ Cost reduction possible compared to pressing methods depending on the shape *For more details, please download the PDF or feel free to contact us.

Company：モルージ
Price：Other

Other contract services
Other services
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nakatani's hot melt molding

Reduce damage to delicate electronic components! Enables increased productivity and allows for lightweight and compact designs.

Nakatani's "Hot Melt Molding" significantly improves productivity compared to potting molding. With injection molding alone, not only is the curing time shorter, allowing for reduced production time, but the need for curing equipment is also eliminated, which reduces production space. Additionally, the thin-walled molding does not require exterior, thus reducing material usage and enabling overall cost reduction. Furthermore, being a solvent-free one-component system, it is harmless, odorless, and environmentally friendly, making it an ecological and economical new technology. 【Features】 ■ Molding temperature: 180℃ to 250℃ ■ Molding pressure: 3 to 50 kgf/cm² ■ Reduces damage to components ■ Thin-walled molding and no exterior required for material reduction ■ Saves both time and space *For more details, please refer to the PDF document or feel free to contact us.

Company：中谷産業
Price：Other

Processing Contract
Surface treatment contract service
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ideal for sensor encapsulation! Hot melt molding

Suitable for sealing and protecting sensors. Cost reduction is also possible through multiple units. Compatible with hot melt materials both domestically and internationally.

Our company specializes in "hot melt molding," which involves low-pressure injection of thermoplastic resin into molds to enhance the protective performance of electronic components. We can use hot melt materials from both domestic and international sources, and we can accommodate various product specifications. We also offer multi-cavity molding, contributing to cost reduction. (Please consult us regarding shapes and sizes.) The high degree of freedom in shape and the ability to shorten molding time are additional benefits. 【Features】 ■ One-component, solvent-free, environmentally friendly ■ Suitable for sensor encapsulation ■ Maximum moldable size: 200×140×10mm ■ Minimum moldable size: 7×5×2.5mm *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Company：中谷産業
Price：Other

Other processing machines
Processing Contract
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Integrated molding technology of urethane foam and rigid resin 'SYSTEX'

[Technical Information Presentation] Are you struggling with the peeling of urethane foam or the labor involved in adhesion? We introduce integrated molding technology for different materials!

Shimizu Industry's "SYSTEX" is a technology for injection molding polyurethane foam and rigid resin as a single unit. An example of a product using SYSTEX is the air volume switching damper for automotive air conditioning, which has a long track record both domestically and internationally. 【Features of SYSTEX Products】 ■ No peeling of polyurethane foam 　⇒ Melted resin penetrates the hollow parts of the foam and binds with anchors ■ High design flexibility 　⇒ Shapes that could not be achieved with manual application can be freely formed ■ Reduction in labor hours 　⇒ Significant reduction in manual application labor through integrated molding 【Are you facing any of these issues?】・The polyurethane foam is peeling off, causing quality problems... ・The product design is complex, making it difficult to apply the polyurethane foam properly... ・I want to reduce costs, but the labor hours for applying polyurethane foam are high... *For more details, please refer to the PDF. Feel free to contact us as well.

Company：シミズ工業
Price：Other

Injection Molding Machine
Electrical equipment parts
plastic
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Special processing: Hot press molding

Colors such as red, blue, yellow, green, black, and white are also available! Suitable for low-cost, small lot production.

"Thermal pressure molding" involves filling polyethylene foam products into a dedicated mold, applying heat and pressure to shape them. It can be molded in three dimensions from simple to complex shapes, and insert molding with hardware, core materials, and other materials is also possible. The characteristics of polyethylene foam, such as "high cushioning and shock absorption" and "floating in water due to being an independent foam," are directly reflected in the molded products. 【Features】 ■ Molded products that retain the characteristics of polyethylene foam ■ Capable of three-dimensional molding from simple to complex shapes ■ Insert molding with hardware, core materials, and other materials is also possible ■ Suitable for low-cost, small-lot production ■ Color options available, including red, blue, yellow, green, black, and white *For more details, please refer to the PDF document or feel free to contact us.

Company：サトウパック
Price：Other

Processing Contract
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding of thermoplastic elastomer resin.

Replacing rubber parts with elastomer molded products can also lead to cost reduction!

Our company offers injection molding (injection molding) and vacuum forming so that customers can directly compare and examine both methods. In "Injection Molding of Thermoplastic Elastomer Resin," we mold resin with the elasticity of rubber, known as thermoplastic elastomer (TPE). As resin molded products that utilize the properties of rubber, they are used in applications such as seals and cushions. 【Features】 - Molding resin with the elasticity of rubber = thermoplastic elastomer (TPE) - Used as resin molded products that take advantage of rubber properties, such as seals and cushions - Generally reduces processes compared to rubber manufacturing - High cost performance - Cost reduction by replacing rubber parts with elastomer molded products *For more details, please refer to the PDF materials or feel free to contact us.

Company：サトウパック
Price：Other

Processing Contract
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding using special molds

Replace the connection parts that were connecting the bent rubber tubes with resin molded products! Reduce the number of parts.

Injection molding typically requires products to be shaped in a "one-directional" manner, similar to removing a pudding from a mold, allowing for easy ejection. However, with special molds, "three-dimensional" ejection becomes possible. By replacing connection parts that were traditionally made by bending rubber tubes with resin molded products, the number of components can be reduced. Furthermore, the assembly process is also simplified, enabling cost reduction. 【Features】 ■ Special molds allow for "three-dimensional" ejection ■ Assembly processes are simplified, enabling cost reduction ■ Special molds enable integrated molding *For more details, please refer to the PDF document or feel free to contact us.

Company：サトウパック
Price：Other

Processing Contract
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Points for Cost Reduction through Cold Forging" *Basic Knowledge Materials Provided!

A wide range of topics from the basics of cold forging to examples of cost reduction! We also include measures to address the disadvantages of cold forging processing due to our high technical capabilities!

This document provides a thorough explanation of the basics of cold forging, including cost reduction examples and cost estimates. Cold forging is a processing method that shapes metallic materials such as carbon steel, non-ferrous metals, and alloy steel using molds at room temperature, which is below the recrystallization temperature. We will introduce various measures to address the disadvantages of cold forging and key points for cost reduction. We encourage you to read it. 【Contents】 ■ What is cold forging ■ Advantages and disadvantages of cold forging ■ Measures for the disadvantages of cold forging at our company ■ Cost reduction point (1) – Introduction of a 2000-ton press machine ■ Cost reduction point (2) – High technical capabilities *For more details, please refer to the PDF document or feel free to contact us.

Company：茨城スチールセンター本社
Price：Other

Processing Contract
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Studies of Problem Solving by Ibaraki Steel Center Co., Ltd.

Examples of multiple improvements such as cost reduction, weight reduction, elimination of heat treatment, and process reduction are also included!

This catalog is a collection of case studies aimed at customers facing management and cost challenges related to multi-process (using multiple presses). It includes topics such as "integration of multiple parts," "part distortion due to heat treatment processes," and "outsourcing management of multiple processes." We have also received positive feedback regarding quality control and significant cost benefits. We encourage you to take a look. 【Contents】 ■ Issue 1: <Multiple press processes for a single product> ■ Issue 2: <Material costs and machining costs as a percentage of product cost> ■ Issue 3: <Work time and cost issues for processing multiple holes> ■ Issue 4: <Integration of multiple parts> ■ Issue 5: <Part distortion due to heat treatment processes> ■ Issue 6: <Machining time> ■ Issue 7: <Lead time and cost for prototype creation> ■ Issue 8: <Outsourcing management of multiple processes> *For more details, please refer to the PDF document or feel free to contact us.

Company：茨城スチールセンター本社
Price：Other

Press Dies
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study on Problem Solving] Machining Time

Achieving high precision and partial cutting-free in the cold forging process! A case where cost reduction was found through total cost.

The customer was troubled by the costs incurred from the working time due to full cutting. Therefore, we proposed a near-net shape unique to ultra-precision cold forging. We achieved high precision and eliminated partial cutting in the cold forging process. As a result, we were able to find a reduction in total costs for products that can be handled by cold forging. 【Case Summary】 ■Issue: Working time from full cutting = Cost ■Solution: Near-net shape unique to ultra-precision cold forging ■Effect: Found a reduction in total costs *For more details, please refer to the PDF document or feel free to contact us.

Company：茨城スチールセンター本社
Price：Other

Processing Contract
Contract manufacturing
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study on Problem Solving] Management of Multiple Outsourcing Processes

Everything from materials to forging is completed within one factory! We can also handle each process individually.

The customer needed to manage multiple outsourcing tasks and was facing challenges. Our company completes everything from materials to forging within a single factory. We can also handle each process individually. As a result, we have demonstrated the effectiveness of quality control and significant cost advantages, receiving positive feedback from our customers. 【Case Summary】 ■ Issue: Need to manage multiple outsourcing tasks ■ Solution: Complete everything from materials to forging within a single factory ■ Effect: Quality control and significant cost advantages *For more details, please refer to the PDF document or feel free to contact us.

Company：茨城スチールセンター本社
Price：Other

Processing Contract
Contract manufacturing
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Foam extrusion molding

Ideal for weight reduction and improved insulation! Achieves significant cost reduction when used in combination with two-color resin molding.

"Foamed Extrusion Molding" is a suitable extrusion molding method for lightweight products and thermal insulation effects, especially when nails or screws are desired. As a result, it is often used as an alternative to building materials and wood. This molding method involves foaming to reduce weight when forming thick items or to allow for nailing as an alternative to wood, making it very important to design with an understanding of the usage environment and applications. 【Features】 ■ Can be used as an alternative to wood with thermal insulation properties due to resin foaming ■ Reduces product weight and provides thermal insulation effects, allowing for nails and screws ■ Achieves significant cost reduction when combined with two-color resin molding ■ Reduces labor with designs that anticipate post-processing *For more details, please refer to the related links or feel free to contact us.

Company：明邦化工
Price：Other

Processing Contract
molding

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

In-mold molding

Simultaneous transfer of various design patterns onto resin molded products.

Our company is a plastic injection molding manufacturer specializing in exterior design parts. We handle processing technologies such as 'In-Mold Decoration (IMD)' which involves inserting printed designs on film into the injection molding die and injecting them, thereby transferring them onto the resin surface. 'In-Mold Decoration (IMD)' allows for decoration to be done simultaneously with injection molding, significantly reducing the number of processes and enabling low-cost mass production. 【Features】 ■ Reduces processes such as painting, allowing for time and cost savings ■ Capable of accommodating complex shapes, offering excellent design flexibility ■ Supports a wide range of variations, including chrome-like finishes and surface textures ■ Allows for hard coating treatment simultaneously with molding ■ Reduces the use of organic solvents compared to painting and plating processes *For more details, please download the PDF or feel free to contact us.

Company：ライフモールド
Price：Other

Touch Panel
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Film insert molding

Integrally molded film with rich design features.

This is a method of forming films with printed patterns, such as PC and PMMA, using vacuum forming, where the outer shape is extracted and integrally molded. Compared to conventional press forming, it can accommodate more complex three-dimensional shapes and offers greater design freedom. Additionally, it significantly reduces the labor involved in secondary processes such as painting and printing of the molded products. 【Features】 ■ It is possible to faithfully reproduce complex shapes such as 3D curves in design. ■ Both forming and decoration processes can be performed simultaneously, leading to significant efficiency improvements. ■ It excels in optical properties and wear resistance. ■ A variety of design expressions are possible. ■ It can flexibly accommodate a wide range of small lot productions. ■ Compared to painting or plating processes, the use of organic solvents is limited, making it environmentally friendly. *For more details, please download the PDF or feel free to contact us.

Company：ライフモールド
Price：Other

LCD display
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Medical device component molding

Precision and compact products essential for advanced medical care.

We achieve high quality and low prices because we can handle everything from mold design and manufacturing to molding and secondary processing. We make the most of the mold design, manufacturing, and injection molding know-how we have cultivated so far to provide high-quality, low-cost products that meet your satisfaction. 【Features】 ■ We provide high-quality products required for medical molded items. ■ You can also rely on us for ultra-small, precision parts. *For more details, please download the PDF or feel free to contact us.

Company：ライフモールド
Price：Other

plastic
molding

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Trial molding

A must-see for those who don't have the luxury of time to prototype due to production schedules! The shortened submission period from the manufacturer has been well received!

Alpec is conducting prototype molding using its own molding machines. We carry out the initial prototype trial in the presence of the customer. Normally, due to production circumstances, there may be no availability of molding machines, but if you leave it to Alpec, there is no need to adjust the production schedule. We have received positive feedback from customers regarding the shortened submission periods from manufacturers. Please feel free to contact us when you need our services. 【Features】 ■ Initial prototype trials can be conducted in the presence of the customer at our company ■ No need to adjust the production schedule ■ Positive feedback on shortened submission periods from manufacturers ■ Specifications: Sodick 40-ton horizontal molding machine *For more details, please refer to the PDF document or feel free to contact us.

Company：アルペック
Price：Other

Prototype Services
Contract manufacturing
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Live] Useful in Practice! The Relationship Between Plating and Plastic Molding~

In 2022, we celebrate our 100th anniversary! Welcome to the 30-minute live plating course.

I will answer the questions I've been wondering about regularly! "What materials should I use?" "What methods work well for shaping?" "What should I be careful about when shaping?" *This webinar is for beginners.*

Company：真工社本社工場
Price：Other

Plating Equipment
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding of automotive quality plastics for all fields.

We will achieve high quality and high cost performance through the collaboration system between Japan and Thailand.

Our company owns injection molding machines ranging from 80t to 1050t, accommodating a wide range of products from small to large sizes. We have been manufacturing injection molded products, such as automotive door visors, which require strict aesthetic quality for many years, and we have strengths in molding technologies for transparent resins like acrylic and polycarbonate. Our main factory is located in Ayutthaya, Thailand, where the Japanese side is responsible for development and quality control, achieving both Japanese and Thai quality standards along with cost competitiveness. Additionally, we have established a system that consistently addresses customer challenges, from technical proposals during the design and development stages to collaboration with mold partners, secondary processing, and small lot responses. We have obtained ISO9001, IATF16949, ISO14001, and ISO13485 certifications and have built a track record in various fields such as automotive, electrical equipment, sports, and medical industries.

Company：Izumi Industry Co., Ltd.
Price：Other

Contract manufacturing
molding

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Supporting a wide range of industries from electronic components to automotive parts! Plastic molding.

We provide high-quality manufacturing services! We have received solid trust and evaluation from our customers.

At Kyowa Seiko Co., Ltd., we provide integrated production from the development and prototyping stage to plastic molding, assembly, inspection, and packaging in a cleanroom environment of Class 10,000 or lower. To enhance manufacturing quality, we have obtained ISO 9001 certification and medical device manufacturing registration, allowing us to meet various demands for medical devices, cosmetics, healthcare products, optical products, automotive parts, baby products, electronic components, and more. Our highly motivated and skilled personnel conduct precise inspections and deliver high-quality products. **Features** - Integrated production in a cleanroom environment of Class 10,000 or lower - Provision of high-quality manufacturing services based on accumulated know-how - Obtained ISO 9001 certification and medical device manufacturing registration - Utilization of the meticulous skills and sensibilities unique to women in manufacturing - Solid trust and evaluation from our customers *For more details, please refer to the related links or feel free to contact us.*

Company：協和精工
Price：Other

Processing Contract
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

IML film insert molding

Reduce environmental impact on painting and plating! Capable of handling complex shapes, supports multi-coloring and deep drawing.

IML molding (film insert molding) is a processing method that performs decoration simultaneously with injection molding by inserting pre-printed and die-cut decorative films into the injection molding mold. Compared to IMD molding, which decorates through printing on molded products or film transfer, it allows for the application of beautiful designs to more complex shapes. The printing applied to the inserted film enables surface decorations such as gloss, matte, patterns, and designs to be freely created, making it possible to produce high-quality design panels required for interiors and automotive interiors. *For more details, please refer to the PDF document or feel free to contact us.*

Company：東和電気
Price：Other

Other machine elements
molding

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Styrofoam molding

We accept orders (made-to-order) from customers. Please visit our website for more details!!

Our company uses the EPS manufacturing method to produce our own molded expanded polystyrene, which is used as cushioning material for agricultural and fishery containers and equipment. We mainly offer 'automatic molding', 'semi-automatic molding', and 'manual molding', and we strive to meet the diverse needs of our customers as much as possible. Please feel free to contact us with your requests. 【Product Examples】 ■ Core materials for rotation ■ Expanded polystyrene cushioning material ■ Expanded polystyrene packaging material ■ Expanded polystyrene fresh egg trays ■ Planters for farm cultivation, etc. *For more details, please download the PDF or feel free to contact us.

Company：大和化学工業
Price：Other

Contract manufacturing
Processing Contract
Other polymer materials
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rubber extrusion molding

What is rubber extrusion molding? Processes and applications.

One method of molding rubber products is rubber extrusion molding. It is an effective method for producing continuous cross-sections and long rubber products, and is used in many rubber products. This article will explain the overview and process of rubber extrusion molding, as well as the types of rubber products that can be created through this method. If you are considering rubber molding methods, please use this as a reference. For detailed articles, please refer to the related links below.

Company：富士ゴム化成
Price：Other

Rubber
molding

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is sending burning molding?

What is sending baked molding?

Various molding methods are used depending on the shape and size of rubber products. One of the molding methods for O-rings and long items is called "continuous vulcanization molding." By using continuous vulcanization molding, it becomes possible to manufacture rubber products with shapes and sizes that cannot be created using other molding methods such as extrusion molding. This article will explain the characteristics, advantages, and disadvantages of continuous vulcanization molding, as well as the differences between continuous vulcanization molding and similar processes like vulcanization and vulcanization bonding. If you are considering rubber product manufacturing, including continuous vulcanization molding, please refer to this information. For detailed articles, please refer to the related links below.

Company：富士ゴム化成
Price：Other

Rubber
molding

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powder molding! High-density processing of metal, alloy, and ceramic powders without binders.

[Limited to Ipros, free samples for the first 10 applicants] Achieving both "suppression of material degradation due to heat" and "high density" through instant binderless molding.

At Asahi Kasei Corporation, we utilize the explosive energy of explosives for the crimping and molding of dissimilar metals, as well as the fabrication of metal components. By using the ultra-high pressure generated from the explosive energy of explosives, we can achieve binderless compaction molding of metal, alloys, and ceramic powders. This allows for increased density and enhanced performance. Additionally, since the compaction using this technology occurs instantaneously, the materials are not exposed to high temperatures for extended periods, making it particularly effective for materials that may deteriorate at high temperatures. 【Features】 - Achieves high density close to the true density of the material as no binder or insert agents are used. - Instantaneous compaction eliminates prolonged thermal load, preventing material degradation due to heat. *These two points allow the inherent properties of the material to be manifested in the molded body. - The shape of the powder before compaction is fundamentally irrelevant. (For shapes where compaction feasibility is uncertain, confirmation will be made through prototyping.) ★【First 10 applicants】 We will provide samples of compacted metal powder. If you are interested, please apply through the "Contact Us" section. ★For more details on what types of powders can be compacted, feel free to contact us.

Company：旭化成機能品営業部　金属加工グループ
Price：Other

Powder Molding Machine
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technology that expands the applications of "two-color molding and multi-material molding" products and increases added value.

Reduction in engineering and man-hours & cost savings possible! Introduction of technology that allows two different colored materials of the same type to be molded together / coexistence of different material properties in a single molded product.

We would like to introduce our "Two-color (different materials) molding" offered by our company. With many years of experience in high-difficulty molding, we produce products with high design quality. Since we do not heavily rely on painting or adhesives, the product quality remains stable. There are fewer defective products, and stable molding allows for reduced process man-hours and cost savings. Please feel free to contact us when you need our services. 【Features】 ■ Reduction in process man-hours and cost savings ■ Improved production efficiency through single-cycle molding ■ Fewer defective products and stable molding ■ Enhanced design quality by utilizing material properties *For more details, please download the PDF or feel free to contact us.

Company：共栄化成
Price：Other

plastic
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding using ocean plastic-derived "OBP PET".

Achieving environmental consideration and high design quality with recycled resin. From material selection to formulation and coloring, we provide total support for prototyping and mass production using recycled PET molding know-how.

Our company, which specializes in injection molding using recycled plastics, is advancing proposals that balance environmental considerations with high design quality by accumulating molding test results using "OBP (Ocean Bound Plastic) PET," which is recycled from plastics before they enter the ocean. 【Features】 - Design proposals that leverage the unique texture of recycled materials - Conducted coloring tests with a focus on aesthetics, such as gray and purple tones - High-quality appearance expression despite being made from recycled materials - Utilizing know-how gained from mass production of recycled PET 【Available Services】 - Injection molding proposals using OBP PET - Mass production molding of recycled PET (rPET) - Material formulation design (OBP + recycled PET, etc.) - Appearance proposals using coloring masterbatches (M/B) - Design proposals considering appearance and strength - Small lot prototype support - Mass production condition considerations *For more details, please download the catalog or feel free to contact us.

Company：共栄化成
Price：Other

plastic
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manufacturing method of MIM (Metal Injection Molding)

Leave metal powder injection molding to us.

Our company is engaged in a new form of metal parts manufacturing technology called "Metal Powder Injection Molding," which integrates metal powder metallurgy technology with plastic injection molding technology. By mixing metal powder with a binder (such as plastic resin), we perform injection molding within a mold, followed by a debinding process to remove the binder, and then high-temperature sintering to produce high-density metal products. *We have published a manufacturing method using illustrations on our website. We leverage the extensive knowledge of metal materials from the Mitsui Metals Group and combine it with plastic injection molding technology to provide high-quality, low-cost MIM products. **Features of MIM:** - Capable of producing complex three-dimensional shapes and suitable for mass production - Achieves higher dimensional accuracy - High density, high strength, high hardness, and high corrosion resistance - Compatible with various materials and difficult-to-machine materials - Proposes labor-saving in subsequent processes and cost reduction, etc. *For more details, please download the PDF or contact us.

Company：九州精密機器
Price：Other

Injection Molding Machine
Processing Contract
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MIM (Metal Injection Molding)

Relative density is over 95%, making it high density! The construction method can be smoothly replaced.

MIM (Metal Injection Molding) is a type of powder metallurgy method that uses metal powder as raw material, allowing for the mass production of parts with complex three-dimensional shapes with high precision and strength. It is a composite technology of "plastic injection molding technology" and "powder metallurgy technology," making it possible to manufacture complex shapes that can be molded with plastic using metal. With a single molding process, a shape close to the final product (near-net shape) can be obtained, aiming for a reduction in machining. Additionally, through the application of insert technology, it can accommodate hollow and undercut shapes. Primarily using stainless steel, which is considered a difficult-to-machine material, we also handle materials such as superalloys. (A list of main materials is available in the catalog.) 【Features】 ■ Three-dimensional complex shapes ■ High precision ■ High strength ■ Mass production ■ Difficult-to-machine materials *For more details, please refer to the PDF document or feel free to contact us.

Company：九州精密機器
Price：Other

Processing Contract
Contract manufacturing
Injection Molding Machine
molding

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

molding Product List and Ranking from 373 Manufacturers, Suppliers and Companies | IPROS GMS

molding Manufacturer, Suppliers and Company Rankings

molding Product ranking