Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
2071～2100 item / All 3438 items
Reducing (pressure-reducing) valve without a drain port
This valve is a direct-acting pressure reducing valve, and while conventional balanced piston type pressure reducing valves require a drain port to escape internal leaks, this valve has no drain port due to its non-leak design.
Ultra-compact pressure compensation flow control valve
- It is a flow control valve that works in one direction only. - The hydraulic oil flows freely until the set flow rate is reached, and once it reaches the set value, it maintains a constant flow regardless of the differential pressure. - There is also a super compact cartridge type available. - It is a two-way flow control valve that is ideal for adjusting the speed of single-acting cylinders. - It can maintain a constant cylinder descent speed regardless of the size of the load.
Small, lightweight, high-precision flow divider.
- There are two types of ultra-compact steel diverter valves with a maximum operating pressure of 35 Pa: screw-in type and plate-mounted type. - It automatically controls to maintain equal flow rates even under uneven loading. - It is ideal for devices that require synchronization accuracy, such as lifters. - There are also types with different flow division ratios (1:2, 1:3, 1:5). - There are types compatible with ISO O-ring ports as well.
Inline (piping installation) dedicated check valve
This type has three different housing shapes and can be installed in the piping system to meet any requirements, as it has threaded sections both internally and externally. These valves can also be used as foot valves in the pump's suction line due to their low response pressure.
1.70MPa specification pilot check valve 2. Ideal for position holding and pressure holding 3. No drain piping required
- This is a high-pressure inline pilot check valve with an internal drain and external pilot, operating at 40 to 70 MPa. - It features a ball seat type that excels in circuit closure, position holding, and pressure retention. - Drain piping is not required.
Check valve without spring, check valve with orifice
- It can be easily attached to the threaded parts of connection ports such as manifolds and cylinders. - It is a check valve with excellent sealing properties. - An inline (piping) type is also available. - An M-thread type is also available.
High-pressure, compact, lightweight cartridge-type pressure control valve.
- The mounting part has a double structure, making it easy to process the manifold, eliminating the influence of mounting distortion, and preventing damage to the manifold holes even when reassembling. - The dimensions of the mounting part are short, resulting in a smaller manifold, which simplifies hole processing and reduces manufacturing costs. - It is ideal for high pressure of 30 to 50 MPa, compact and lightweight, and suitable for downsizing manifolds and hydraulic units while reducing costs. 【Features】 - Used to control pressure within hydraulic systems. - Available in two types: relief valves and sequence valves.
This is a valve specifically for forklifts.
It is ideal for controlling lifting devices such as aerial work platform lifts and reach-type forklifts. We also offer types compatible with the regenerative circuit of electric forklifts.
This is a throttle check valve with a wide variety of mounting types.
The throttle valves Type Q, QR, and QV are valves that control flow. This type comes in five different sizes and is used for flow control in accumulators and control circuits. The throttle type equipped with these types (covering the entire operating range) has higher resistance to degradation of hydraulic oil compared to types with annular gaps (there is no edge filter effect). Type FG allows for fine adjustment and can be used to adjust the switching time of directional control valves, prevent surge pressure, and dampen vibrations, among other applications. The amount of throttle can be adjusted by changing the length of the slot with a screw. These valves are of the "tool-adjustable" type only.
1. Position holding 2. Hunting prevention (smooth movement)
- Our multi-flow pump can be combined with a seat-type switching valve to form a synchronization circuit. - It maintains a constant speed for reversing devices, swinging devices, and long crane arms where the load fluctuates positively and negatively.
Easy control, high-performance servo valve!!
●Mounting surface: Compliant with ISO 4401-03-02-0-05 or ISO 4401-05-04-0-05 ●The valve block can be configured using the subplate system BA. ●Compliant with CE marking according to EMC directive.
It complies with the ISO 4410 standard.
Atos modular (stacked) valves offer a wide variety, making it easy to configure systems according to customer requirements.
These are various ISO standard valves from Atos Italy.
There are inline check valves, relief valves, hydraulic pilot-operated directional control valves, etc.
70MPa compatible, insert-type check valve
- It is ultra-compact, lightweight, and supports ultra-high pressure of 70MPa. - It can be integrated into the P ports of our sheet-type switching valve Type G (RE01, ER11, ER21, ER31) and Type WH1 (EK01). - This valve is ideal for hydraulic circuits with regular switching cycles.
Hot runner molding equipment that makes it easy to adjust weld lines and set up both large and small products.
The "VS Series" is a plunger gate air valve that allows for the adjustment of the opening and closing timing of each gate using a timing controller. The air cylinder is designed to be removable as a unit, and since it uses tubes and fittings for air piping, it offers excellent maintainability. With a wide variety of nozzle sizes and gate sizes available, it enhances productivity for molded products across a broad range of fields. 【Features】 ■ Stable quality reproducibility ■ Simplification of mold processing ■ Beautiful gate appearance quality ■ Good color changeability ■ Excellent maintainability *For more details, please refer to the PDF document or feel free to contact us.
The valve connection surface distance is about half that of conventional products. It enables the miniaturization and lightweight design of peripheral devices!
The sanitary valve from Clean Valve Industry Co., Ltd. was born in response to the manufacturing challenge of "how to eliminate waste and make full use of food, pharmaceuticals, and high-value-added raw materials." Its smooth construction and durability, characteristic of mirror-finished stainless steel products, along with its original shape that eliminates snagging when transporting materials, make it a groundbreaking product that maximizes material usage on the production line. Even small amounts of precious materials can be fully utilized, leading to significant cost savings. Additionally, the structure that prevents residuals offers high benefits for equipment maintenance and durability. The "Short Range 2-Way Manual Ball Valve (Non-Dead)" has a connection surface distance that is about half that of conventional products, allowing for the miniaturization and lightweighting of peripheral equipment. Its design minimizes liquid pooling, reducing material loss during transport. For more details, please contact us or refer to the catalog.
A ball valve where the transport material does not come into contact with the ball disk material.
The sanitary valve from Clean Valve Industry Co., Ltd. was born in response to the manufacturing challenge of "how to eliminate waste and make full use of food, pharmaceuticals, and high-value-added raw materials." Its smooth construction and durability, characteristic of mirror-finished stainless steel products, along with its original shape that eliminates snagging when transporting materials, make it a groundbreaking product that maximizes material usage on the production line. Even small amounts of precious materials can be fully utilized, resulting in significant cost differences. Additionally, the structure that prevents any leftover materials offers high advantages in equipment maintenance and durability. The "Two-Way Ball Valve (for Fine Resin Only)" ensures that the transport material does not come into contact with the ball disc material. It is equipped with a drive rotary actuator that is one level higher than usual, preventing stoppage due to the entrapment of powder and granules on the seat surface. For more details, please contact us or refer to the catalog.
Complete sanitation! Easy disassembly and assembly.
The sanitary valve from Clean Valve Industry Co., Ltd. was born in response to the manufacturing challenge of "how to eliminate waste and make full use of food, pharmaceuticals, and high-value-added raw materials." Its smooth construction and durability, characteristic of mirror-finished stainless steel products, along with its original shape that eliminates snagging when transporting materials, make it a groundbreaking product that maximizes material usage on the production line. Even a small amount of precious material can lead to significant cost savings when used completely. Additionally, the structure that prevents leftover materials offers high advantages in equipment maintenance and durability. The "Sanitary Rotary Valve (Flange Type)" features complete sanitary properties, easy disassembly and assembly, compact unit design, and #300 buff polished finish on both the inner and outer surfaces. For more details, please contact us or refer to the catalog.
Cost reduction with replacement every 2 to 3 years! Resolving the issues of conventional products that had a short lifespan and high replacement frequency, achieving longer durability.
The "DEC VALVE," a trunnion-type metal touch ball valve for powder fluid transport, is a valve specifically developed by our company, a specialist in air transport of powder fluids. It addresses critical issues of conventional valves in 24-hour operating facilities, such as short lifespan, frequent replacements, and equipment shutdowns due to operational failures. 【Features】 - Fixed rotation axis minimizes rotational torque - Adoption of industry-leading high-output actuators prevents operational failures - Implementation of strict quality control systems and quality standards *For more details, please contact us or download the PDF.
Adopting high-output actuators! A wide variety of sizes available.
The "Metal Touch Ball Valve" is a valve designed for high temperature and high pressure applications, supporting DEC's powder transport technology. It features a high torque actuator to ensure reliable operation. Additionally, due to its low minimum operating pressure, it has good contact between the ball's spherical surface and the seat surface, making it resistant to jamming. We offer a wide range of sizes from 25A to 350A. 【Features】 ■ The rotating axis is fixed, minimizing torque ■ Minimal ingress of powder into the ball and body ■ Stabilized rotational torque with very little jamming ■ Equipped with a high-output actuator ■ Primary side seal structure that does not restrict flow direction *For more details, please refer to the PDF document or feel free to contact us.
Fluororesin ball valve
This is a ball valve made of fluororesin. There are A-type, B-type, and C-type, making a total of six types: two-way and three-way.
Fluororesin check valve
This is a check valve made of fluororesin. It is a valve that prevents the backflow of liquids. Since it uses a fluororesin spring embedded with metal, it can be used with most solvents and chemicals. We offer three types depending on the connection type.
Naturally dripping check valve! Easy-to-use shape with tube connection type.
This product is an AR check valve used to prevent backflow of liquids/gases, incorporated into circuits of medical devices and life science-related equipment/instruments. It is produced safely and securely in Japan, in an environment equivalent to ISO Class 7/US Class 10000. It is provided with annealing treatment to prevent dimensional changes. Please feel free to contact us when you need it. 【Features】 ■ Safety for medical use ■ Clean production environment ■ High versatility ■ Minimal aging changes *For more details, please refer to the related links or feel free to contact us.
Suitable for medical devices, analytical instruments, semiconductor-related equipment, and food machinery, among others.
The liquid contact parts are made entirely of fluoropolymer and perfluorinated materials, providing excellent chemical resistance. They are ideal for medical devices, analytical instruments, semiconductor-related equipment, and food machinery.
Introducing the stainless steel ball valves handled by Hashimoto Sangyo!
The "stainless steel ball valve" is a product of Hashimoto Sangyo Co., Ltd., a trading company dealing in pumps, air conditioning equipment, piping materials, etc. We offer a lineup including "SBR/SBRW" which uses SCS13A material for the body, and "SBRM/SBRMW" which uses SCS14A material for the body. Additionally, PTFE is used for the thrust washer. The operating temperature range is from 0 to 95°C. 【Model Numbers】 ■SBR / SBRW ■SBRM / SBRMW *For more details, please refer to the PDF materials or feel free to contact us.
Introducing brass valves handled by Hashimoto Sangyo, which engages in the sale of various pumps and more!
The "brass valve" is a product of Hashimoto Sangyo Co., Ltd., a trading company dealing in pumps, air conditioning equipment, piping materials, and more. We offer a ball valve "BBF III" suitable for water, oil, and steam, as well as a gate valve "S-BS125" suitable for water and steam. Additionally, we provide information on other models and dimension tables. 【Models】 ■BBF III ■S-BS125 *For more details, please refer to the PDF materials or feel free to contact us.
Compatible with single screws and single TS replacements! The short distance between surfaces makes it suitable for space-saving.
We would like to introduce the compact ball valve 'VP911' and the single swivel ball valve 'VP600' handled by Hashimoto Sangyo. Compact and economical. The face-to-face dimension is short, making it suitable for space-saving. Color handle options are also available. The 'VP600' can also be customized for single-thread/single-TS configurations. 【Features】 ■ Compact and economical ■ Short face-to-face dimension ■ Suitable for space-saving ■ 'VP600' can be customized for single-thread/single-TS configurations ■ Color handle options are also available *For more details, please refer to the PDF document or feel free to contact us.
Excellent corrosion resistance and equipped with anti-tipping features! Available in "VP450HI" for a usage temperature of 0 to 50°C and "VP450PP" for 0 to 80°C.
Introducing the swing check valve 'VP450' handled by Hashimoto Sangyo. It features HI-PVC for impact resistance. It has excellent corrosion resistance and comes with anti-tipping features. We offer two models: 'VP450HI' for a temperature range of 0 to 50°C and 'VP450PP' for 0 to 80°C. 【Features】 ■ HI-PVC for impact resistance ■ Excellent corrosion resistance ■ Anti-tipping features ■ Available for temperature ranges of 0 to 50°C and 0 to 80°C *For more details, please refer to the PDF document or feel free to contact us.
The body is made of resin and is designed for vertical piping only! It features complete backflow prevention, is lightweight, compact, and easy to disassemble and clean.
We would like to introduce the ball check valve 'VP460' and the ball foot valve 'VP560' handled by Hashimoto Sangyo. The body is made of resin. It features complete backflow prevention, is lightweight, compact, and easy to disassemble and clean. It also excels in resistance to external corrosion. The 'VP460' can be converted to a male thread/male TS configuration. 【Features】 ■ Designed for vertical piping ■ Complete backflow prevention, lightweight, compact, and easy to disassemble and clean ■ Body made of resin ■ Excellent resistance to external corrosion ■ 'VP460' can also be converted to a male thread/male TS configuration *For more details, please refer to the PDF document or feel free to contact us.
It is possible to accurately adjust the distance between the flanges by rotating!
We handle the "Hollow Type Linear Introducer (Bellows Type)." By rotating the main body, the distance between the flanges can be accurately adjusted. 【Features】 ■ Bellows type linear introducer ■ The distance between the flanges can be accurately adjusted by rotating the main body. *For more details, please refer to the PDF document or feel free to contact us.
