Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 87 items
RikaKurin Extreme Take MAX - Testing Dehumidification and Absorption Effects!
RikaKurin Extreme Max - We conducted an experimental verification of its dehumidifying and moisture-absorbing effects. *For more details, please see the video below.
Using reusable ceramic membranes. Achieving easy verification of membrane separation on a small scale. *Many achievements available.
The ceramic membrane table test unit is designed for the purpose of filtering (concentrating and purifying) target liquids using a cross-flow method with ceramic membranes. The cross-flow generated by the circulation pump runs parallel to the filtration membrane, minimizing the accumulation of solids on the membrane surface and achieving stable filtration characteristics. 【Features】 - A lineup of membrane grades from fractionation molecular weight levels to submicron levels - Membrane regeneration and repeated use are possible through membrane cleaning - Excellent solvent resistance (organic solvents), acid/alkali resistance, and abrasion resistance - Usable at high temperatures and pressures - Proven results in the concentration and purification of strong acids, strong alkalis, and slurries that could not be used before *For more details about the product, please download the PDF materials or contact us.
Improved surface roughness! We present the results of verifying machining accuracy using the 'Liquid Cutter'.
Our company conducted a verification of lathe machining accuracy using the "Liquid Cutter." When machining with old coolant, there were instances of snagging, and the cutting width was inconsistent, resulting in a significantly rough surface finish. However, when machining with the same coolant using the "Liquid Cutter," the snagging was reduced, the cutting width became consistent and finer, and the surface roughness improved. Additionally, when quantifying the surfaces machined with each method, it was found that when using the old coolant, the height and depth varied by a maximum of 10 to -15μm, whereas after using our product, the height and depth varied by a maximum of 4 to -4μm, demonstrating an improvement in surface roughness through numerical evidence. *For more details, please refer to the PDF document or feel free to contact us.*
Improvement of machining accuracy! Introducing the verification of drill bit tip wear using each of the liquids!
We conducted wear verification of drill tips using the "Liquid Cutter." When processed with the coolant used, the color became darker due to heat, and wear on the cutting edge was observed. However, compared to the processed items using the coolant, those processed with the "Liquid Cutter" showed significantly less damage to the cutting edge, even after processing over 200 more pieces, resulting in reduced wear and improved machining accuracy. *For more details, please refer to the PDF document or feel free to contact us.
Introduction of the verification results showing that the photocatalyst, which contains no impurities, has grown a photocatalytic film from the pure titanium surface of the substrate without any interface.
Titanistar undergoes surface oxidation treatment on pure titanium, which is the metal titanium. A photocatalytic film free of impurities grows from the surface of pure titanium without any interface. In other words, the pure titanium substrate becomes TiO2 through surface oxidation treatment. Observations were conducted using optical instruments on the Titanistar photocatalytic film. - Surface observation using an electron microscope: The surface of Titanistar is porous and cluster-like, and it was found that the film grows from pure titanium without any interface. - Control of crystal structure: Titanistar can control its crystal structure. It can be adjusted to exhibit higher photocatalytic performance with structures such as anatase, rutile, or mixed types. - Observation of surface composition: The surface composition of Titanistar was observed, revealing that it is primarily composed of titanium and oxygen. From the above, it can be concluded that the photocatalyst Titanistar is free of impurities and that the photocatalytic film grows from the surface of the pure titanium substrate without any interface. *For more details, please refer to the PDF document or feel free to contact us.
For those considering the introduction of a 3D printer! I will explain the differences between home use and commercial use.
Have you ever wondered about the differences between commercial and home-use 3D printers when considering the introduction of the recently popular 3D printers? Is it that home-use models cannot be used in a business setting, or is a home-use printer sufficient for a general household? Many people seem to be struggling with this, especially since there are few home-use 3D printers that support metal output. In this column, we will thoroughly compare how home-use and commercial 3D printers differ. By reading this article, you should be able to understand the differences between home-use and commercial 3D printers and which one you should introduce. [Contents] ■ Comparison of differences between home-use and commercial 3D printers ■ Other points to consider when choosing a 3D printer ■ Commercial models excel in precision and variety of materials *For more detailed information about the column, you can view it through the related links. Please feel free to contact us for more details.
Conduct cycle time verification and interference confirmation verification at the conceptual stage! Support coordination confirmation with preceding and subsequent processes.
When conducting a cycle time study for the equipment, it is particularly necessary for multi-joint robots to either consult the manufacturer or use a dedicated robot simulator to create teaching programs. Therefore, it is difficult to calculate with high accuracy at the conceptual stage. Moss Co., Ltd. supports cycle time verification, interference checks, and coordination with upstream and downstream processes from the conceptual stage. Please feel free to contact us when needed. *For more details, please refer to the PDF materials or feel free to inquire.
Through difficult origin identification techniques in DNA testing, we scientifically prove whether seeds and Wagyu beef, even if their DNA is stolen and cultivated, were truly raised in Japan.
We would like to introduce our anti-counterfeiting measures and verification service, "Proof of Origin," to prevent origin fraud. The intellectual property built by our predecessors is leaking abroad, resulting in a loss of national interests. By applying diamond origin certification technology, we can scientifically digitize the unique information of fields and sake breweries, enabling verification from overseas. With origin certification technology that is difficult to achieve through DNA testing, even if the DNA of seeds or Japanese beef is stolen and cultivated, we can scientifically prove whether it was truly raised in Japan. 【Features】 ■ Collecting and fingerprinting unique information such as soil and water from the production area ■ Identifying the production region from parts of meat and vegetables ■ Applying diamond origin certification technology *For more details, please refer to the PDF document or feel free to contact us.
Conducted on adult men and women with nasal and eye allergy reactions.
Our company conducts efficacy evaluation trials aimed at verifying the improvement effects of functional food intake on nasal and eye allergy reactions. The trial design can be customized to meet your needs. Please feel free to contact us for more information. 【Trial Design】 ■ Parallel group comparison trial (RCT) ■ Randomized double-blind placebo-controlled *For more details, please download the PDF or feel free to contact us.
We will verify the security requirements of ETSI EN 303 645 that are required for selling products (IoT/NW devices) in the EU.
One of the inspection services provided by our company, HERMAS, includes a commissioned service for testing the security requirements of devices as mandated by ETSI EN 303 645. As of now (July 2021), we will conduct inspections of your products at our inspection laboratory in Taiwan, which complies with international standards (ISO17025). We will provide consistent support in Japanese from the initial hearing during your consideration to the final report. However, since the verification will be conducted at an overseas laboratory, we can keep costs down. *Generally, the compliance confirmation will be submitted in English, but we can also provide a Japanese version of the report if needed. Our high level of technical expertise has already been recognized, as evidenced by projects with telecommunications carriers in Europe and the United States, and reports we submitted have been accepted by the NCSC (National Cyber Security Center - UK government agency) and the FTC (Federal Trade Commission - US Federal Trade Commission).
Thorough examination of the cost, performance, and practicality of DeepSeek-R1-Distill-Llama-70B!
DeepSeek-R1-Distill-Llama-70B is an AI model based on Llama 3.3 70B that utilizes knowledge distillation technology. It excels particularly in Japanese language processing and has strengths in the legal field and business efficiency, making it expected to be utilized in business applications. However, what is the actual cost performance? Is there value in adopting it compared to other AI models? In this article, we will thoroughly examine: ■ The performance and features of DeepSeek-R1-Distill-Llama-70B ■ A comparison with competing AIs such as GPT-4 and LLaMA 70B ■ Cost-effectiveness in business applications ■ The advantages and disadvantages of adoption and suitable use cases We will clarify whether this AI model is truly a "usable" option for companies. *For more details, you can view the related links. Please feel free to contact us for more information.
The actual data of the Francis turbine was measured at the FORTUNAII hydroelectric power station in Minas Gerais, Brazil!
This project report is a collaboration with Hidroenergia, a water turbine manufacturer, and involved the verification of CFD simulations for Francis turbines using TCFD software. In this project, tests were conducted on existing turbines, and as a result of comparing the test data with the simulation data, the turbine efficiency and power values obtained from the TCFD software matched very well. *For more detailed information, please refer to the related links. For further details, you can download the PDF or feel free to contact us.*
![TCFDを用いたフランシス水車のCFDシミュレーション検証4].png](https://image.mono.ipros.com/public/product/image_sub/2a1/2001523254/IPROS12794928341947722651.png?w=280&h=280){kind=small}
[Fact Sheet] Effectiveness of TOC in Each Phase of Cleaning Validation (Design, Validation, Verification)
- Purpose and Challenges of Cleaning The cleaning process is designed to effectively remove compounds, ensuring that no decomposition products or residual cleaning agents are left in the manufacturing equipment, allowing it to be used for the production of the next batch. Relying on specific analytical methods can take years from design/development/completion and requires significant manpower.
