verification Product List and Ranking from 63 Manufacturers, Suppliers and Companies

[Demo Video] Can ice be made with just compressed air? Testing the cooling power of the colder.

This is an experiment to see if we can generate ice using Kordar's cooling power. The result is... it might be plain.

Korda is one of Sanwa's pneumatic equipment that has been chosen in manufacturing sites for nearly 40 years, with the keyword "just connect compressed air." It is a simple type of spot cooler that applies the principle of vortex, discharging ultra-low temperature air with a maximum temperature difference of -75°C (at a supply pressure of 0.7 MPa, in the case of model 190-75SV) just by connecting compressed air, without using power or refrigerant gas. Usage examples: - Removal of heat generated during processing of metals and plastics (such as titanium alloys, stainless steel, Inconel, thermoplastic plastics, etc.) - Improvement of cutting speed and extension of tool life due to the cooling effect on workpieces and tools - Dry cutting of magnesium alloys - Cooling to prevent troubles caused by heat generation in electrical control boxes and various measuring instrument boxes - Cooling of molds - Cooling tests for semiconductors and PC boards, among others *For more details, please feel free to contact us.

Company：サンワ・エンタープライズ
Price：Other

Pipe Fittings
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Demo Video] Tried Making Snow Crystals! Testing the Cooling Power of Corda.

Challenging to make snowflakes with a colander! .... This needs a rematch! But the cooling effect was real.

Kordar is one of Sanwa's pneumatic equipment that has been chosen in manufacturing sites for nearly 40 years, with the keyword "just connect compressed air." It is a simple spot cooler that applies the principle of vortex, discharging ultra-low temperature air with a maximum temperature difference of -75°C (for a supply pressure of 0.7 MPa, in the case of model 190-75SV) without using power or refrigerant gas, just by connecting compressed air. Usage examples: - Removal of heat generated during processing of metals and plastics (such as titanium alloys, stainless steel, Inconel, thermoplastics, etc.) - Improvement of cutting speed and extension of tool life due to the cooling effect on workpieces and tools - Dry cutting of magnesium alloys - Cooling to prevent issues caused by heat generation in electrical control boxes and various measuring instrument boxes - Cooling of molds - Cooling tests for semiconductors and PC boards, among others *For more details, please feel free to contact us.

Company：サンワ・エンタープライズ
Price：Other

Pipe Fittings
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Demo Video] Protect the Ice Cream in the Scorching Sun! Testing the Cooling Power of the Kolder.

Mid-summer outdoor experiment! Can we keep ice cream in a clear box under the blazing sun without it melting?

Kordar is one of Sanwa's pneumatic equipment that has been chosen in manufacturing sites for nearly 40 years, with the keyword "just connect compressed air." It is a simple type of spot cooler that applies the principle of vortex, and without using power or refrigerant gas, it discharges ultra-low temperature air with a maximum temperature difference of -75°C (for a supply pressure of 0.7 MPa, in the case of model 190-75SV) just by connecting compressed air. Usage examples: - Removal of heat generated during processing of metals and plastics (such as titanium alloys, stainless steel, Inconel, thermoplastic plastics, etc.) - Improvement of cutting speed and extension of tool life due to the cooling effect on workpieces and tools - Dry cutting of magnesium alloys - Cooling to prevent troubles caused by heat generation in electrical control boxes and various measuring instrument boxes - Cooling of molds - Cooling tests for semiconductors and PC boards, among others *For more details, please feel free to contact us.

Company：サンワ・エンタープライズ
Price：Other

Pipe Fittings
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

For the food industry: Verification of autoclaves, heat sterilization, and cooling processes.

For measuring temperature and pressure in the sterilization process of retort foods, beverage cans, and canned goods! "Reliable records," automatically and smartly.

The "testo 191" is a logger suitable for measuring temperature and pressure in low-temperature pasteurization and sterilization processes for beverages and food products, as well as in freeze-drying processes. - The dedicated case with an interface streamlines the entire process from setup to reading. - It features an automatic calculation function for F0 value/PU value/A0 value/saturation vapor pressure. - Battery replacement is easy and does not require special tools; it can be installed and removed by hand. 【Lineup】 ■T1/T2/T3/T4/P1 *For more details, please download the PDF or feel free to contact us.

Company：テストー
Price：Other

High pressure steam sterilizer/autoclave
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PCB design DFM verification Valor NPI

Solve manufacturability issues during the design phase to save time and costs.

To incorporate manufacturing optimization into the PCB design process, concurrent DFM verification using Valor NPI is the most efficient method. By verifying and improving manufacturability and implementability at the design stage, it is possible to avoid PCB re-routing due to rework from the actual process. 【Features】 • Reduces the number of prototypes required when releasing new designs • Identifies manufacturing issues early in the design phase, reducing manufacturing costs • Improves design reliability by discovering manufacturing risks before mass production begins • Shortens the time required for supplier confirmations • Compatible with all major PCB layout CAD systems *For more details, please download the PDF or contact us.

Company：シーメンスEDAジャパン
Price：Other

Production Management System
verification

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Professional Services: IQ/OQ Validation

We provide transducer calibration services along with IQ/OQ validation packages!

In medical device and pharmaceutical companies, software validation is essential to comply with FDA 21 CFR Part 820 and ISO 13485. To support IQ/OQ software validation, our services have been providing on-site IQ/OQ validation and documentation services for many years. This service, offered by the equipment manufacturer, is designed to ensure that our testing equipment meets specifications and can generate valid results. 【Features】 ■ Installation Qualification (IQ) - Installation checklist ■ Operational Qualification (OQ) - Transducer validation - Software functionality check - Calculation validation *For more details, please refer to the PDF document or feel free to contact us.

Company：インストロンジャパンカンパニイリミテッド日本支社
Price：Other

others
Other contract services
Other services
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mitarepo [45] Testing the capabilities of BobCAD-CAM's deburring path.

[Mitarepo] I want to automate the troublesome deburring process! What is the capability of BobCAD-CAM's deburring path? | System Create

"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" We will deliver useful information each time from the wide range of product genres handled by System Create. The theme of Vol. 45 is "Testing the capabilities of the deburring tool path in BobCAD-CAM!" Recently, we will actually verify the capabilities of the newly added deburring tool path in "BobCAD-CAM 3AXIS Premium," which was introduced at Marsgo. This time, we collaborated with G-BEC Technology Co., Ltd. and used their dedicated deburring end mill to perform the deburring! We used aluminum for the workpiece. Assuming the processing of flat holes and tolerance holes, we will check the state of each burr and the processing time. "Can low-cost CAD/CAM really handle deburring?" "Will secondary burrs still appear in the end?" We will explain the capabilities of the BobCAD-CAM deburring tool, along with verification photos and comments from the technical staff. *You can download the materials from the button above.

Company：システムクリエイト
Price：Other

3D CAD
Other CAD related software
Milling machine
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Verification of Insulation Distance for High Current Conductive Busbars 'XVL Studio Z'

Spatial distance and surface distance that cannot be measured in 3DCAD.

In inverter units where miniaturization and weight reduction are required and the structure is becoming more complex, ensuring the "insulation distance (spatial distance and creepage distance)" between busbars and other metal components as specified by safety standards has become a challenge. Distance measurements using "3D CAD" that do not meet the insulation distance requirements are inefficient and, more importantly, heavily reliant on human input, leading to issues such as measurement omissions and errors. 'XVL Studio Z' addresses these problems by utilizing the lightweight 3D data format "XVL"! 【What you can do with XVL Studio Z】 ■ Automatic extraction of combinations that need to be measured ■ Automatic measurement of spatial distance and creepage distance ■ Report output of verification results including path images *For more details, please refer to the PDF materials or feel free to contact us.

Company：図研本社・中央研究所
Price：Other

3D CAD
Other CAD
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Third-party verification of lasers/LEDs

UL Verified Mark - You can promote the safety of light radiation.

Laser and LED technologies are applied in various fields such as information technology, healthcare, entertainment, and the automotive industry. With the increase in products, manufacturers are pressured to differentiate their products in the market. On the other hand, for consumers, the incorporation of lasers and LEDs into more familiar products has made safety assurance an important factor in product selection. In this era, UL's Verified Mark is the optimal program to appeal to buyers regarding the safety of laser/LED light emission levels in products. Why is verification necessary? The UL Verified Mark program for laser/LED products is a third-party verification service aimed at verifying the emission levels of lasers/LEDs at reliable testing laboratories and utilizing the results in your marketing activities. By using it alongside UL's well-recognized safety evaluation services in the United States, it alleviates concerns for users and retailers while promoting brand transparency in the market. Products that measure laser/LED emission levels are categorized into three groups under this unique UL program.

Company：UL Japan
Price：Other

Public Testing/Laboratory
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Basic Knowledge] Why do eyes get tired from using a PC? A thorough investigation of the causes of eye fatigue.

Hybrid type with DC dimming + PWM dimming! Achieved flicker-free operation regardless of application or environment.

"Eye strain from PC work" is inevitable, as you are staring at the screen up close for long periods of time, so naturally, the level of fatigue is greater than that from watching television. So, is there a way to alleviate this fatigue? Our company has pursued the "ideal monitor" for a comfortable PC life and has examined the causes of eye strain. [Contents (partial)] ■Verification 1: LED backlight ■Verification 2: Bright screen ■Verification 3: Blue light *For detailed information, please refer to the related links. Feel free to contact us for more information.

Company：EIZO
Price：Other

LCD display
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Motion design and control verification

A 3D CAD specialized in mechanical design that can handle everything from conceptual design to cycle time considerations.

To develop high-productivity devices and equipment, it is important to design and consider movements in the assembly from the conceptual stage to enhance design quality. However, in the field of production equipment and machinery design, the following problems arise: 【Common Concerns】 - It is cumbersome and difficult to conduct design considerations in 3D. - Cannot represent conceptual diagrams (2D) in 3D. - Designing movements in the conceptual stage is troublesome. - Trial and error leads to violations of constraints, resulting in numerous errors. - Design is done in 2D, and verification is done in 3D, leading to a predetermined outcome. All of these issues can be resolved. The 3D CAD iCAD SX for mechanical designers is a three-dimensional CAD specifically developed for machinery and production equipment, supporting the gradually finalizing mechanical design development process. You can confirm the positional relationships with surrounding parts on a 3D assembly while conducting movement and process considerations using conceptual diagrams and time charts. Furthermore, control debugging can be performed on the 3D CAD, enabling improvements in design quality and reductions in development lead time. For more details, please download the catalog and check it.

Company：i CAD - 機械設計向け3DCAD（3次元CAD）開発元 -
Price：Other

3D CAD
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reverse Engineering Evaluation/Verification

Comparison between 3D models and products

The comparative evaluation of 3D models and products can be visually identified. It is useful not only for product dimension evaluation but also for assessing springback in pressed products, distortion changes in welding, thickness, and elongation checks.

Company：ワンロード
Price：Other

Other molds
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Verification of Beamforming IC for Phased Array Antennas

Providing advanced wideband test solutions that cover the millimeter wave band.

The miniaturization of antenna feed electronic products is progressing due to integrated beamforming ICs. With a multi-port network analyzer, the necessary test setup can be consolidated into a single measuring instrument. This document presents the "Verification of Beamforming ICs for Phased Array Antennas" using Rohde & Schwarz solutions. [Contents] ■ Challenges ■ Rohde & Schwarz Solutions ■ Special needs for wideband modulated signals such as 5G NR and satellite communications *For more details, please refer to the PDF document or feel free to contact us.

Company：ローデ・シュワルツ・ジャパン
Price：Other

Other electronic measuring instruments
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evaluation and Verification of Safety and Security in Three Technologies

Performance that exceeds expectations" "Reliable quality" "Short delivery times that do not hinder mass production plans

We will develop and manufacture all types of specialized machines for processing, assembly, cleaning, and inspection, based on our quality policy of 'Quality innovation and the challenge of customer satisfaction that knows no bounds.'

Company：三技
Price：Other

Processing Jig
Inspection fixture
verification

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plating test machine

Reproducing vertical transport with horizontal shaking! Achieving a more realistic plating test.

This device enables plating tests under conditions closer to actual equipment. By oscillating laterally, simple plating tests can be conducted under vertical transport conditions. Additionally, by replacing the anode case, both soluble and insoluble options can be examined. Furthermore, conducting plating tests with substrate sizes allows for verification that is closer to actual equipment.

Company：トーア電子
Price：Other

Plating Equipment
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Substrate verification

We will create a comprehensive board verification and documentation to ensure you can use it immediately after delivery.

■Verification Record List ■Verification Record Document ■De-rating Table ■Temperature Verification *For more details, please refer to the PDF materials or feel free to contact us.*

Company：カイロスキ本社
Price：Other

Circuit board design and manufacturing
Other contract services
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Product Example] Prototype Verification

Shortening the period of the seminar activities! We will conduct thorough verification of intersections and tapers all at once.

To medical device manufacturers, we would like to introduce a case study of prototype verification. The company faced the challenge of wanting to bring their product to market as quickly as possible. Prototype verification allows for the direct execution of quality improvement activities that determine the width of tapers and intersections by making minor adjustments to the molds used for prototyping. [Case Overview] ■ Challenge - Desire to bring the product to market as quickly as possible ■ Results - Reduced the duration of quality improvement activities - Conducted thorough verification of intersections and tapers in one go *For more details, please refer to the related links or feel free to contact us.

Company：クライム・ワークス
Price：Other

Processing Contract
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Verification of the cleaning effect of formic acid reflux devices [Joint Research]

A detailed explanation of formic acid reflow! We will introduce cleaning know-how.

Formic acid reflow is a revolutionary joining process that allows solder bonding without flux by using a corresponding dedicated solder. By substituting the reducing action, one of the functions of flux, with formic acid, the amount of flux components can be significantly reduced. In the field of power devices, soldering using the formic acid reflow method is becoming more widespread due to its significant advantages in suppressing the occurrence of voids and enabling bonding at low temperatures. *For more details, you can view the related links. *The PDF document is a technical material that explains the cleaning technology for advanced electronic components.

Company：ゼストロンジャパン
Price：Other

Technical and Reference Books
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Verification of Cleanability for Long Edge Resistance [Joint Research with Japan Superior Co., Ltd.]

Introduction to the joint research between Nippon Superia Co., Ltd. and Zestron Japan!

Long-side resistors refer to a type of chip resistor (resistor) on a substrate where the electrodes are arranged along the long side of the component. In recent years, there has been an increase in cases where they are used for high functionality and long-term stability. In this instance, we created a test board using general-purpose rectangular resistors (2012) and long-side resistors (1220), and conducted substrate cleaning using a cleaning agent primarily composed of water (manufactured by Zestron / VIGON PE 304N) and a general-purpose solvent-based cleaning agent primarily composed of organic alkali. For this verification, we received cooperation from Japan Superior, a solder manufacturer, and conducted a detailed analysis comparing the cleanability of both types of resistors. *For more detailed information, please refer to the related links. Feel free to contact us for further inquiries.

Company：ゼストロンジャパン
Price：Other

Printed Circuit Board
Other cleaning machines
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powertrain system-led development and verification

Early integration of virtual and real powertrain systems into a complete vehicle environment!

Next-generation vehicles are defined largely by their electric power source and the software that drives them. The complex software of connected powertrains can be integrated into simulation software like CarMaker, allowing for calibration and testing on different virtual prototypes in the early stages of development. Virtual test driving can predict the overall performance of the vehicle, with vehicle dynamics, energy and fuel efficiency, and drivability being key criteria. *For more detailed information, please refer to the attached PDF. Feel free to contact us for further inquiries.*

Company：IPG Automotive 本社、名古屋オフィス
Price：Other

Development support tools (ICE, emulators, debuggers, etc.)
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thorough verification of leak prevention performance of stainless steel piping using composite repair.

Not only carbon steel, but also stainless steel piping can be installed! Verification of leak prevention effectiveness.

We examined the leak prevention effect when applying primer to stainless steel piping. A pressure test was conducted under the same conditions to compare the leak prevention effects of carbon steel piping and stainless steel piping. It was found that applying primer to stainless steel piping, which cannot undergo surface treatment with electric tools (Bristol Blaster), can demonstrate leak prevention effects. 【Test Piece Details】 ■ Shape: Connecting 1B piping only with a composite layer (PE sheet used for shaping) ■ Number of Layers: 2 layers ■ Surface Treatment ・ Carbon Steel Piping: Electric tools ・ Stainless Steel Piping: Primer *For more details, please download the PDF or feel free to contact us.

Company：富士ファーマナイト
Price：Other

Repair Agent
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thorough verification of leak prevention performance under harsh construction conditions using composite repair.

We offer services that can be expected to restore the strength of reduced meat piping, stop leaks, and improve textile effects!

The state of the 3B piping is broken, which is considered a missing part. We will consider repairs under the condition that the required durability of the equipment is 1 year, and we created two patterns of test specimens, conducting pressure tests on each. The required number of layers based on the design for a durability of 1 year is as follows: if we can achieve 7 layers with a 50mm overlap and 5 layers with a 150mm overlap, we demonstrated sufficient leak-stopping effect even under harsh construction conditions. [Verification Results] ■ Overlap 50mm - Number of layers: 7 - Result (MPa): 3.0 (leakage occurred at 3.0MPa during pressurization) ■ Overlap 150mm - Number of layers: 5 - Result (MPa): 5.0 (no leakage at 5.0MPa) * Testing was concluded at 5.0MPa due to the risk of piping breakage. * For more details, please download the PDF or feel free to contact us.

Company：富士ファーマナイト
Price：Other

Repair Agent
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Verification of leak prevention performance when repairing through holes with composite repair.

If you can remove the contents, it is possible to stop the leak with composite repair!

This document explains "composite repair for through holes." It details how to determine the "lamination range" and "number of layers," as well as the leak-stopping effect of composite repair applied to a through hole (φ24mm), using images, diagrams, and tables for a thorough explanation. This is a useful reference, so please take a moment to read it. [Contents] ■ How to determine the "lamination range" and "number of layers" for composites (in the case of through holes) ■ Leak-stopping effect of composite repair applied to a through hole (φ24mm) *For more details, please download the PDF or feel free to contact us.

Company：富士ファーマナイト
Price：Other

Repair Agent
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microbubble Research Report: Verification through Cavitation

Verification of micro fine bubble generation due to cavitation! Introducing the report of the test results!

We conducted an evaluation test to determine whether cavitation, which generates microbubbles, actually occurs in our micro-bubble product. A transparent sample was created based on our product. The testing period was from May 1, 2018, to March 31, 2019. As a result of the experiment, it was confirmed that cavitation occurs solely with the pressure of standard tap water, and that approximately 2% of the air contained in the tap water is being converted into micro-nanobubbles. [Overview] ■ Testing period: May 1, 2018 – March 31, 2019 ■ Request details: - Evaluation test to determine if cavitation occurs to generate microbubbles with our product ■ Test results: - Cavitation occurs solely with the pressure of standard tap water - It was confirmed that approximately 2% of the air contained in the tap water is being converted into micro-nanobubbles *For more details, please refer to the related link page or feel free to contact us.

Company：micro-bub
Price：Other

Other water treatment equipment
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Food allergen testing for verification of display confirmation and cleaning effectiveness.

Supports 27 items including orange and gelatin (pork-derived). The original menu and flexible pricing system are very popular!

Our company offers food allergen testing to report the presence or absence of specific raw materials, including 8 designated items and 19 related items (*1). We can also accommodate labeling requirements for overseas products. *1 Gelatin is only sourced from pigs. 【Features of the Testing】 ◆ We provide testing in accordance with the notification from the Deputy Director of the Consumer Affairs Agency. Testing for specific raw materials follows the notification law, conducting screening tests (ELISA method) and confirmation tests (PCR method, Western blot method). We also reference the notification law for testing related materials. ◆ We propose four types of DNA extraction methods, including the original method, for the PCR method. In the "PCR method," which detects DNA, the choice of extraction method is a crucial point. In samples containing many substances that may inhibit testing, it can affect whether "valid results can be obtained." Our company offers a selection of extraction methods tailored to the type and purpose of the sample, from methods in accordance with the Deputy Director's notification to our original method that enhances DNA purification while keeping costs down. *For more details, please request a catalog or view the PDF data available for download.

Company：ビジョンバイオ
Price：10,000 yen-100,000 yen

Contract measurement
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Third-party verification "TESTERA"

Solve the challenges of verification work and achieve efficient and high-quality verification! Software verification services.

"TESTERA" is a software verification service where a third party (evaluator), who is not a developer of the system or product, conducts an independent evaluation of the software. It identifies issues and defects that developers may overlook, analyzes the causes of poor quality, and proposes improvements to the design and manufacturing processes, particularly enhancing the quality of highly complex systems. If you feel that "time and quality may be lacking," we recommend third-party verification. [Benefits] ■ Achieve product quality improvement through dual verification from both professional and user perspectives. ■ Accelerate development speed by separating verification tasks from development. ■ Extensive verification experience with core business systems, portal sites, travel expense reimbursement systems, and more. ■ Companies that have implemented this have achieved cost reductions of 40-50%. *For more details, please refer to the PDF document or feel free to contact us.

Company：楽堂
Price：Other

Software (middle, driver, security, etc.)
Other services
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Verification of the sterilization effect of atmospheric pressure plasma on bacteria attached to smartphones.

We conducted an experiment aimed at visualizing the extent of the sterilization effect of atmospheric pressure plasma irradiation and clarifying its effectiveness and challenges!

We examined the sterilization effect of atmospheric pressure plasma on microorganisms attached to the glass surface of smartphones and will introduce the details of the microorganisms involved and the results. Microorganisms were collected from the "untreated area" and the "area irradiated with atmospheric pressure plasma" on the glass surfaces of two staff members' smartphones using cotton swabs, and cultured. We then evaluated the sterilization effect by comparing the colonies of microorganisms formed on the Petri dishes from both areas. As a result, mainly "bacteria from hands" and "bacteria from the environment" were identified, with at least three types of microorganisms observed. On the plates after plasma irradiation, the number of bacterial or yeast colonies decreased compared to the "untreated" ones. Fungi and actinobacteria were still observed after plasma irradiation. [Observed Microorganisms] ■ Bacteria or Yeast ■ Filamentous Fungi (Mold) ■ Actinobacteria *For more details, please refer to the related links or feel free to contact us.

Company：アクア
Price：Other

Microbiology
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Free Verification Campaign for Metal Masks

Determine the quality, dirt, and presence of scratches on the metal mask. A report will be submitted after verification. Free shipping.

We are currently conducting a "Free Metal Mask Verification Campaign" from July 1 to August 31, 2022. Using the metal mask evaluation machine, we will thoroughly check the condition of the metal masks. We can compare with Gerber data to investigate differences such as the presence and shape of openings, as well as confirm the cleaning condition after washing (clogging, foreign matter attachment, scratches, etc.). Managing metal masks is extremely important in bringing implementation defects as close to "0" as possible. Why not take this opportunity to verify your company's metal masks? ★ Please apply through the "Contact Form" on this page. 【Free Verification Contents】 ■ Comparison with Gerber Data (Presence of openings, shape, misalignment, initial tension measurement) ■ Cleaning condition after cleaning (Clogging, foreign matter attachment, crushed solder foreign matter attachment, flux residue, surface scratches) * You can view a PDF document introducing the metal mask evaluation machine and examples of its use. Please feel free to contact us.

Company：ルックス電子
Price：Other

Contract Inspection
verification

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

verification Product List and Ranking from 63 Manufacturers, Suppliers and Companies | IPROS GMS

verification Manufacturer, Suppliers and Company Rankings

verification Product ranking