Air nozzle(1mm) - メーカー・企業と製品の一覧

[For efficient water drainage] 100% water-draining air nozzle

Are you making this mistake while draining water from your work?

To those in charge who are struggling with water drainage of workpieces: Are you making these mistakes with water drainage of workpieces? Do you know the real reason why, even when you increase the strength of the air blow, the water droplets don’t get blown away? Do you know the real reason why changing the shape of the air nozzle doesn’t help in draining the water? Do you know the real reason why increasing the number of air nozzles still doesn’t sufficiently drain the water? These are typical mistakes made by companies that use air blow for water drainage and droplet removal from workpieces, resulting in "not being able to sufficiently drain water even with air blow." However, these mistakes are minor compared to the fatal mistake I am about to share with you. What is that fatal mistake? It is... Focusing on the strength of the air blow and neglecting the "quality" of the air. [Continued below] ↓↓↓

企業：ピュアトラスト
価格：Other

Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Patent] Achieving an air nozzle that completely removes water with air blow.

Are you making this mistake while draining water from your work?

To those in charge who are struggling with water drainage of workpieces, Are you making these mistakes when it comes to draining water from workpieces? Do you know the real reason why, even when you increase the air blow strength, the water droplets don’t get blown away? Do you know the real reason why changing the shape of the air nozzle doesn’t help in draining the water? Do you know the real reason why increasing the number of air nozzles doesn’t sufficiently drain the water? These are typical mistakes made by companies that use air blow for draining water and removing droplets from workpieces, resulting in "not being able to drain water sufficiently even with air blow." However, these mistakes are not as significant compared to the fatal mistake I am about to share with you. What is that fatal mistake? It is... Focusing on the strength of the air blow and not paying attention to the "quality" of the air. [Continued below] ↓↓↓

企業：ピュアトラスト
価格：Other

Other physicochemical equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Air Nozzle Air Blaster Blower Type AB-B50P

Energy-saving flat air nozzle compatible with blowers.

The blower-compatible type from the Air Blaster series is now available! This product was developed based on customer feedback requesting a "nozzle that can spray flat with a blower" as an energy-saving measure. 【Features】 - Made of PPS resin, which has excellent heat and chemical resistance. (Heat resistance temperature: 130℃) - More affordable and lighter compared to aluminum. - An energy-saving flat air nozzle compatible with blower air, which can significantly reduce energy costs compared to compressor air. - Capable of spraying a large volume of air from the blower at a width of 50mm. 【Applications】 - For draining water and oil from products and parts, blowing away during sorting, foreign object removal, and cleaning. - For cooling and drying boards, films, cotton materials, pipes, cans, etc., as well as draining and drying surfaces and interiors, and dust removal. - Various applications such as blocking outside air, dust, insects, and foreign objects (air curtains).

企業：共立合金製作所 / 総代理店　エバーロイ商事株式会社
価格：Less than 10,000 yen

nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Air nozzle that achieves "energy saving," "high wind speed," and "long-distance air."

By reviewing the air nozzle you are using, you can reduce the electricity costs of the compressor! Yet, it still achieves a wind speed of 94 m/s, resulting in a long flat air discharge distance.

Do you know how much electricity your air nozzle consumes? It is generally said that compressed air accounts for 20-30% of the total energy consumption in a factory. The "HAYATE-Type F" is an air nozzle that achieves "energy saving," "high air speed," and "long-distance air" (patent pending). By simply switching to the "HAYATE-Type F," it is possible to significantly reduce electricity costs. 【Features】 ■ Amazing energy-saving design ■ Incredible high air speed with low flow rate ■ Long flat air discharge distance ■ Compatible with curtain widths up to 200mm ■ Choose between "reliable SUS304" or "lightweight aluminum" ★ Testing is possible by sending sample work. *We are currently offering explanatory materials comparing running costs per unit. Please feel free to contact us.

企業：トリーエンジニアリング
価格：Other

Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Small Flat Air Nozzle for Blowers 'WindJet YBLW'

Achieve high impact and high flow rate blowers even at low pressure! Significantly energy-saving compared to compressor air.

The "WindJet YBLW" is a compact air nozzle for blowers that enables high impact and high flow rates even at low pressure, thanks to its unique structure that allows for efficient air rectification. Switching from compressed air results in significant energy savings. Additionally, despite its flat and compact shape, it features a blow-off width of 53mm, and we also offer headers with nozzles arranged in parallel to accommodate longer lengths. 【Features】 ■ A fault design that allows air to escape even if objects come into contact with the nozzle's blow-off section ■ Lower power consumption compared to compressed air systems ■ Compatible with long and complex shapes using headers and adjustable hoses *For more details, please refer to the catalog. Feel free to contact us with any inquiries. Spraying Systems, a global brand for spray nozzles, offers a variety of nozzles tailored to different applications based on over 90,000 items of proven performance. *For information on spraying nozzles, please download the PDF or contact us.

企業：スプレーイングシステムスジャパン
価格：Other

Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High-pressure blower circumferential outer injection type JN series

It can be connected to a hot air generator and used with high-temperature hot air.

This is a nozzle designed primarily for applications such as draining and drying the inner walls of tubular materials (pipes, tubes, etc.). 【Features】 - Standard products available from a small diameter of Φ20 to Φ130 - Stable performance from low wind speeds up to 160 m/s - Nozzle specification: 1mm - Inlet: PS1" to 2" *For more details, please contact us or download the PDF materials.

企業：大浩研熱
価格：Other

Other cleaning machines
Food Cleaning Equipment
Pneumatic Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Thoroughly remove particles with air only, no water - 'Air Screw Nozzle'

No more revolution! No need for washing; particles are removed with just air blowing.

<Compatible with Class 100! Can be used for cleaning semiconductors> This air nozzle, utilizing a patented unique technology, has an air ejection power that is on a completely different level compared to conventional air nozzles. It removes particles adhered to semiconductors through powerful air blowing. (Compatible with Class 100) In other words, the cleaning process that used to involve three steps: "1. Water washing ⇒ 2. Water draining ⇒ 3. Drying" has been completely transformed. It can now be completed in one step using only "air blowing" without any water. This significantly shortens the process. ■ Benefit 1: Increased productivity and production volume The entire sequence of water washing, water draining, and drying is replaced by cleaning with only air blowing. This means that water washing, water draining, and drying are no longer necessary, leading to a remarkable improvement in productivity and production volume. ■ Benefit 2: Improved operational efficiency and cost reduction As mentioned above, the elimination of the entire sequence allows for significant cost cuts on personnel, various equipment, and the running costs and electricity expenses associated with those equipment. ■ Benefit 3: Improved yield With cleaning power that cannot be compared to other air nozzles, it contributes to improved yield. This helps enhance production efficiency.

企業：ピュアトラスト
価格：Other

Other semiconductor manufacturing equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High thrust air nozzle

Achieving low noise and high-capacity air blowing.

It provides powerful air blow for applications that require high thrust and high speed. While it uses more compressed air compared to other air nozzles, it consumes less compressed air at the same thrust as conventional blow-off products, making it energy-efficient.

企業：シーエステック
価格：Less than 10,000 yen

nozzle
Pneumatic Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Multi-Channel Jet FL-600SY (Air Nozzle)

The noise level has decreased by about 60%! This air nozzle can be used not only in general industries but also in food service and healthcare.

Lechler multi-channel jet (air nozzle) A new low-noise flat jet nozzle has been introduced for the multi-channel jet! When replaced with a 4mm pipe, the noise level is reduced by approximately 60%. Air consumption can also be reduced by about 33%. The new air nozzle 'FL-600SY' is suitable for draining water, blowing away debris, and drying in very narrow spaces with flat air. By using SUS-316L material, it has become a product that can be used not only in general industry but also in food service and medical applications. ◆ For product details, please refer to the catalog or contact us. *Lechler GmbH is a German spray nozzle manufacturer.

企業：ティックコーポレーション本社
価格：Other

nozzle
nozzle
Pneumatic Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

【Demo unit available for loan!】Sonic Air Knife System (Blower Type)

Blow away water, dust, and dirt from parts with high-speed air and dry quickly. Demo units are also available for loan!

Water removal drying with Sonic Corporation's blower and air knife! By rotating the fan inside the blower at a minimum of approximately 12,000 rpm to 20,000 rpm, it is possible to achieve a larger airflow than compressors or domestic blowers. Additionally, one of the greatest features of the Sonic air knife system is that it is very economical, consuming only a fraction of the power compared to similar operations using conventional compressed air. Environmentally, it not only operates at low noise levels but also contributes to the reduction of carbon dioxide emissions due to its low power consumption. Demo units are available for loan, so please feel free to contact us. 【Demo Units】 ★ Unit 1 (Sonic 70) Flow rate: 3 Nm³/min to 13 Nm³/min Motor size: 5.5 kW *With inverter ★ Unit 2 (Sonic 85) Flow rate: 4 Nm³/min to 20 Nm³/min Motor size: 7.5 kW *With inverter ★ Air Knife Total length: 610 mm Maximum wind speed: approximately 170 m/sec Connection diameter: 3 inches Slit width: approximately 1 mm Note: Please contact us if you need a hose.

企業：ティックコーポレーション本社
価格：Other

Pneumatic Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Multichannel Jet FL-600M4 (Air Nozzle)

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (4mm type).

Rehira's multi-channel jet (air nozzle) allows for laminar airflow, which not only provides powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, it can also minimize air consumption. In other words, it is an energy-saving product. The blow pattern is straight (7mm width).

企業：ティックコーポレーション本社
価格：Other

nozzle
nozzle
Pneumatic Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Multi-Channel Jet FL-600M (Air Nozzle)

Best-selling Rehiller air nozzle FL-600E's sister product, small round type.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only provides powerful impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

企業：ティックコーポレーション本社
価格：Other

nozzle
nozzle
Pneumatic Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High-pressure blower multi-port round hole injection air nozzle B series

A nozzle that is optimal for objects with fine gaps and irregular surface unevenness.

Compared to slit-type nozzles, the wind speed at the center of the round hole is stronger, and there is less air entrainment from the surroundings, resulting in a slightly longer wind reach. 【Features】 ○ The dimensions and pressure loss characteristics of the main body, excluding the ejection part, are almost the same as the original nozzle. ○ Effective ejection length: 100 to 2600 mm ○ Ejection port specifications: Φ3.5×11 to 261 locations ○ Inlet: PT1" (external thread) to PT2" (external thread) *Please consult us regarding the specifications of the ejection part. Changes can be made to suit your application. For more details, please download the catalog or contact us via our website.

企業：大浩研熱
価格：Other

nozzle
Pneumatic Equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Compact nozzle enables miniaturization and lightweight design of the device. Achieves reduction in running costs.

Contributes to reducing manufacturing costs of equipment through miniaturization of devices. It also contributes to cost optimization from manufacturing to operation through energy savings and air conservation.

The "CBIM" series and "SCBIM" series are compact two-fluid general-purpose nozzles. They can spray a very small amount of liquid effectively through control, making them suitable for various applications such as cooling, coating, humidifying, and cleaning. The SCBIM series can achieve the smallest spray amounts, while the CBIM series, which is resistant to clogging and has a total length of less than 30mm, can be used for all these purposes. The "TF-FS" series is a compact air nozzle with a total length of 35mm. It excels in quiet operation and achieves energy savings with strong impact and powerful blowing. The "CVVP" series is a coin-shaped single-fluid nozzle with an extremely thin profile. It can be integrated into equipment without protruding, allowing for installation in tight spaces. *We also have a wide range of other spray nozzles available. For quotes or custom requests, please feel free to contact us with any nozzle-related inquiries. Phone and online consultations are also available at any time.*

企業：いけうち（霧のいけうち）
価格：Other

nozzle
Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

100% water is removed with air blow! 'Air Screw Nozzle'

[Patent] Instant complete water removal of workpieces with air blow = complete drying!

Anyway, the video is proof. Please be sure to watch it. With conventional air nozzles, it is impossible to completely drain water with just air blowing after washing, and a separate drying process was necessary for complete drying. However, our air nozzle achieves complete water drainage through its unique patented technology. It enables 100% water drainage and complete drying. In other words, with just air blowing, the water attached to the workpiece can be completely removed. Since the workpiece dries completely with just air blowing, the subsequent drying process becomes entirely unnecessary. ■ The drying process is no longer needed ■ Conventional nozzle: Washing ⇒ Water drainage ⇒ Drying With our nozzle: Washing ⇒ Water drainage (Drying is unnecessary) As a result, not only can the time spent on the drying process be completely reduced, but also: - Personnel previously allocated to the drying process - Running costs such as electricity bills - The drying equipment itself become unnecessary, leading to significant cost reductions and increased efficiency in the production line.