Blasting Product List and Ranking from 13 Manufacturers, Suppliers and Companies

MSR Corporation Blast Processing (Rough Surface Treatment) Technical Introduction

In addition to the production of decorative films, it also has a high effectiveness in functional aspects such as improving adhesion.

Our "Blast Processing (Rough Surface Treatment)" is a processing technology that digitally creates calculated scratches on the surface of materials to increase surface area and enhance adhesion. When applied to mirror-finished materials, it quickly transforms them into aesthetically pleasing materials. Additionally, hairline finishes commonly used on stainless steel are also possible. We can accommodate a wide variety of materials, including polyester, fluorine films, aluminum foil, copper foil, and conductive rubber. 【Features】 - Decorative film production available - Improved adhesion - A rich lineup of processing methods to create uneven surfaces - Polishing processing possible with micron-level roll blasting - Invisible surface unevenness processing possible with plasma treatment *For more details, please refer to our catalog or feel free to contact us.

Company：MSR 第2工場
Price：Other

Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technology for quickly removing old paint films and rust: Blast treatment

Have you removed the rust caused by old paint films or corrosion using a stripping agent or manual scraping?

At our company, we remove old paint, rust, scale from steel plates, grease, oil, and dirt uniformly and quickly through "blast processing." Currently, we have five large blast chambers, allowing us to accommodate urgent surface treatment processing. In addition to the commonly used and cost-effective grit blasting, we also offer alumina blasting. With the motto "No rust for 100 years," we propose rust prevention and surface treatment solutions that satisfy our customers in need. 【Features】 ■ Uniform ■ Speedy ■ Capable of removing old paint, rust, scale from steel plates, grease, oil, and dirt ■ Accommodates urgent surface treatment processing *For more details, please refer to the external link or feel free to contact us.

Company：新免鉄工所
Price：Other

Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Single item orders are possible! Making the impossible possible with our unique technology [Precision Blast Processing].

Attention those struggling with precision blast processing! We have numerous successful solutions for challenges that other companies cannot address. Please feel free to consult with us.

There are various applications for precision blasting, such as the removal of welding discoloration, "improving adhesion" before plating, polishing the surface of cast and forged items for "aesthetic enhancement," and "surface modification" to activate the surface. These possibilities can help solve your problems, so we will introduce various applications. 【Various applications obtained through blasting】 ■ Cleaning, stripping, and removal ■ Improved adhesion ■ Enhanced aesthetics ■ Surface modification *For more details, please refer to the PDF document or feel free to contact us.

Company：東洋ブラスト工業所本社
Price：Other

Processing Contract
Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Easy explanation in this one book! "Guide to Blast Processing"

"What is blast processing?" "What types of blast machines are there?" "What materials are used for blasting?" A detailed explanation of precision blast processing! *Materials available upon request.

Are there any issues like these? - I am troubled by distortion in thin materials. - There are inconsistencies in the blasting process. - It is difficult to process complex shapes uniformly. - Precise handling is required for precision parts. - I would like support for prototypes and research. - I want to create various types with different grit sizes (size of the abrasive material). - I would like to request test processing. - I want to match the sample product. - I want to blast process only specific parts. - I would like to include masking in my request. - I need ultra-short lead time and short lead time support. - I have one or two pieces, but I want them done immediately. - I requested specific grit sizes and surface roughness, but the finish is different from what I expected. - I would like surface roughness measurement data and processing inspection documents after treatment. - I want to measure roughness indicators such as Ra, Ry, Rz, and S values. - I would like a construction certificate to be created. - I want to request clean packaging after blasting or thermal spraying. - I want to remove fine dirt from the surface after processing. - I want to create various types with different grit sizes (size of the abrasive material). - I want slip resistance. - I want grip strength. ⇒ We will solve all these issues! *For more details, please refer to the PDF document or feel free to contact us.

Company：東洋ブラスト工業所本社
Price：Other

Processing Contract
Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Blast Q&A

"Is it possible to process according to the sample?" "What sizes are available?" and other Q&A are included!

This case study collection introduces a number of Q&A about blasting. "Is it possible to produce high-precision parts such as precision machined components, molds, and engraved rolls?" and other questions like "What are the available sizes?" and "Can you handle the production of parts including blasting treatment?" are included. Please take a look. [Excerpt from the content] ■ Is it possible to produce high-precision parts such as precision machined components, molds, and engraved rolls? ■ I have masking (to prevent blasting); is that possible? ■ How long does it take for delivery? ■ Is it necessary to have data and inspection certificates? ■ Is it possible to process according to samples? *For more details, please refer to the PDF document or feel free to contact us.

Company：東洋ブラスト工業所本社
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Improvement of painting quality through blast treatment.

By performing blast treatment, significant improvements in painting quality can be expected.

Blast treatment is a type of surface treatment technology used to remove dirt and old paint from surfaces such as metal, concrete, and wood. Media: The media used in blast treatment includes sand, beads, glass beads, steel shot, steel grit, alumina, and carbon steel. These media are ejected from blast treatment equipment and collide with the surface to remove dirt and old paint. Pre-treatment for painting: Blast treatment is also used for surface preparation before painting. As a pre-treatment for painting, blast treatment improves the adhesion of paint by removing surface dirt and old paint, enhancing the durability and rust resistance of the painted surface. Additionally, by changing the surface shape, it can increase the adhesive surface area for the paint, thereby improving painting quality. Blast treatment is one of the surface treatment technologies and is used in many industrial fields. By selecting the appropriate media, pressure, injection direction, and time, it efficiently removes surface dirt and old paint, and is widely utilized for applications such as pre-treatment for painting, surface modification, and metal processing.

Company：原田鉄工
Price：Other

Rust Inhibitor
paint
Painting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mechanism of the blast effect

The effects include the removal of dirt and oxide films, improved adhesion, and enhanced strength and durability, among others.

What is blast processing? Blast processing is a type of surface treatment that involves projecting abrasive materials at high speed to process the surface. This changes and improves the condition and properties of the surface. Structure of blast processing There are two methods of blast processing: "air-type" and "mechanical-type." The air-type uses compressed air to project the abrasive material, while the mechanical-type utilizes a rotating impeller to project the abrasive material using centrifugal force. Effects of blast processing Blast processing grinds the surface and removes impurities. Additionally, fine irregularities are formed, which enhance the adhesion of paints and anti-corrosion treatments. The finish of the paintwork is also made more uniform. Blast processing is effective for anti-corrosion treatment of metals and improving their appearance. Summary Blast processing is an important method of surface treatment and is essential for the success of metal anti-corrosion and painting. The structure is simple, but its effects are significant. Harada Ironworks Hiroshima Official Link

Company：原田鉄工
Price：Other

Rust Inhibitor
Processing Contract
Other painting machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Received Rust!? How to Remove Rust from Stainless Steel

It is possible to remove light to heavy rust through blasting! Acquired rust can be easily prevented with paint!

At Harada Ironworks, we are equipped with large blast facilities. We also keep polishing materials that can be used on stainless steel, allowing us to remove rust even when it has spread extensively and deeply. The surface after blasting has a subdued luster without shine, making it less noticeable for reflections, fingerprints, and scratches. Mild rust can be removed at home! For more details, please see the related links below. Moreover, rust transfer can be easily prevented by painting! We have extensive experience in both stainless steel blasting and painting, so please feel free to consult us. For more details, please see the related links below.

Company：原田鉄工
Price：Other

Rust Inhibitor
Painting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Illustration] The Effects of Blast Treatment on Coating

By performing blast treatment, the adhesion of the paint is greatly improved, resulting in a beautiful appearance.

Blasting processing is a type of "substrate adjustment" that involves simultaneously spraying compressed air and abrasives to collide the material and abrasives at high speed. The abrasives that collide at high speed scrape away the surface of the material, exposing it. The surface of untreated materials often has a lot of oxidation films (mill scale), rust, and impurities attached to it. If these impurities are not removed, the paint will quickly peel off. Careful substrate adjustment can prevent painting defects before they occur. Blasting does not use chemicals, and there are many types of abrasives available, making it a significant advantage as it can process various materials without restriction. Additionally, it is very effective not only for painting but also as a pre-treatment for plating, lining, and coating. The countless bumps and indentations created by the impact of the abrasives increase the contact area, allowing for the 'anchor effect' where the material penetrates into the gaps and hardens. This effect significantly enhances adhesion, resulting in a more beautiful finish for the paint. With no impurities and a strongly adhered paint, it is said that the anti-corrosion effect lasts 3 to 4 times longer compared to regular painting. This allows for a reduction in the frequency of repainting, repairs, and maintenance, extending intervals and thus conserving resources and costs.

Company：原田鉄工
Price：Other

Rust Inhibitor
Painting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Numerous Improvement Examples!】Improved Release Properties with 〇〇 Processing *Resin, Plastic Molds

The issue of "release failure" in plastic injection molding may be caused by difficult-to-polish areas. Please give "surface modification treatment by blasting" a try!

1. Where are you getting stuck? Where are you clinging? Is this not happening? ■ The rise near the PL surface of the insert made by electrical discharge machining ⇒ Discharge marks remain. Even if polished, the polishing marks become perpendicular to the release direction, which may lead to release failure. ◎ Countermeasure: Performing blast processing on the [insufficiently polished areas] will reduce the factors causing sticking and improve release properties. ◎ 2. Have you ever experienced sticking even though you are polishing to a [shiny mirror finish]? ■ To eliminate sticking, increase the grit of the polishing ⇒ If the surface roughness is too smooth (as it approaches a mirror finish), the cause of release failure changes from [sticking] to [adhesion]. ◎ Countermeasure: If [release failure does not improve even after polishing], adding fine irregularities through blast processing will improve release properties. ◎ [Design changes] [Review of molding conditions] ⇒ If defects are not improving, the [surface condition] may be the issue. Please consult with us once! [There may be such advantages too!?] ■ When release resistance decreases... - Cycle time becomes faster - Ejection slopes can be reduced - No sticking to the mold occurs

Company：不二製作所本社
Price：Other

Resin mold

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[INTERMOLD Exhibition] α Treatment - For Customers Struggling with Precision Molds -

[Case study on improving the lifespan of press molds] Enhancing the durability, fatigue strength, and sliding properties of precision molds, while minimizing shape changes and modifying the mold surface! Free initial tests available.

Alpha processing (patented) is a blasting process that uses extremely fine abrasives. It successfully minimizes changes in the shape and dimensions of the workpiece, surpassing conventional technologies to create a fine surface texture known as "microtexture" and a fine crystalline structure called "nanocrystals" through a peening effect. As a result, this treatment enhances "durability, fatigue strength, and sliding properties." It is suitable for maintaining areas such as: - Precision machining tools - Edges of punching tools - Surfaces of thin film coatings Since it improves the surface condition of the workpiece itself, there is no concern about peeling like with coatings. It also has a very high retention effect for lubricants and release agents, making it usable for mechanical components like cam slides and guide posts. **Features** - Sliding properties and anti-adhesion due to microtexture - Increased fatigue strength and hardness through nanocrystallization - Adaptability to various materials and fine areas - Can be processed without peeling even on coating film surfaces Free initial testing is currently available! Please feel free to contact us. *Consultation required based on quantity and work size. *For more details, please refer to the PDF document or feel free to contact us.

Company：不二製作所本社
Price：Other

Other surface treatment equipment
Processing Contract
Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【INTERMOLD Exhibition】MKS Processing - Solving Molding Defect Issues -

Numerous achievements in improving release properties of precision molds (plastic molds)! Enhancing the mold surface with high productivity functions! Solving issues related to molding defects!

MKS processing is a complex blast treatment involving multiple processes. It is a surface treatment technology specifically designed to solve issues related to resin molding defects. 【Examples of Release Defect Issues】 * Cavitation occurs. * The pin marks become larger during ejection. * It cannot be released without applying a release agent. → We will resolve the above issues all at once with the know-how we have cultivated so far and MKS processing! The slogan of the mold division at Fuji Seisakusho is "Always maintain a posture of working together with our customers to tackle problems!" This is because it is impossible to identify and solve the complex factors contributing to resin molding defects without the cooperation of our customers. We are in an era where resin materials are rapidly changing. It is assumed that molding defects will also arise according to the characteristics of the materials. We also accept urgent requests at any time, so please feel free to reach out if you are in need.

Company：不二製作所本社
Price：Other

Resin mold

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultimate paint stripping measures

The cause of paint peeling lies in the substrate! By properly performing substrate treatment (surface preparation), it is possible to prevent paint peeling.

"Ultimate Paint Stripping Prevention" The measures against paint stripping are very simple. - Surface preparation is done through blasting, removing all foreign substances attached to the surface. - Use paint with excellent adhesion to the material appropriately. - Select a paint specification with high corrosion resistance and weather resistance to prevent stripping for a long time. - Manage the paint application to maintain the appropriate film thickness. By adhering to the above four points, a paint that will not peel for over 30 years can be achieved! [Improving the Service Life of Heavy Anti-Corrosion Coatings] https://www.nc-net.or.jp/company/98405/product/detail/186702/ Harada Iron Works is equipped with large air-operated blasting equipment. We regularly use "grit blast" and "sand blast" abrasives, but we can also accommodate other abrasives, so please feel free to inquire. After blasting, prompt rust prevention treatment is necessary, but since Harada Iron Works also has a painting factory, we can provide a consistent response from blasting to topcoat application in-house. For more details, please see the related links below.

Company：原田鉄工
Price：Other

Rust Inhibitor
Painting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

About substrate adjustment using blast.

ISO Sa1 refers to one of the standards for surface preparation established by ISO, a non-governmental organization based in Geneva, Switzerland.

【For information on ISO standard surface preparation, click here】 https://www.nc-net.or.jp/company/98405/product/detail/210553/ 'ISO Sa1 Work Method' 1. Remove any slag, welding spatter, etc. that is adhered to the surface. 2. Use solvents to remove any oils, greases, etc. that are adhered to the surface. 3. Remove all foreign substances adhered to the surface by blasting. 4. Remove dust and debris with clean, dry air. 'ISO Sa1 Precautions' Feasibility of construction depending on environmental conditions - Please stop work on days with bad weather or high humidity. Painting process after work completion - The surface after blasting becomes active and rust will form in a short time, so painting needs to be done promptly. - If rust occurs again before painting, blasting treatment will need to be performed again. - Compare with the photos in the ISO visual book to determine the acceptance of processing.

Company：原田鉄工
Price：Other

Rust Inhibitor
Painting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[INTERMOLD Exhibition] α Treatment - For Customers Struggling with Rubber Molding -

Improvement of release defects in rubber molds for O-rings and packing! No peeling of plating! Reduction of release agents! Capable of modifying the mold surface with minimal changes in cutting shape and dimensions.

We solve problems such as "It takes time to release the mold," "The product gets stuck to the mold," and "I want to reduce the amount of release agent"! 'α Treatment' is a surface treatment method that creates fine surface shapes through blasting. While surface treatment by blasting is often criticized for causing shape and dimensional changes, 'α Treatment' is okay! It uses very fine abrasives, which minimizes damage, and has the following characteristics: - Maintenance of sharp shapes such as cutting edges - Preservation of precise dimensions in molds with strict dimensional tolerances - Maintenance of coatings such as hard chrome plating It can be used not only for molds but also for tools like drills and cutters, electric bits, and mechanical parts like gears and sprockets. By improving sliding properties and enhancing the retention of lubricants through fine surface shapes, it can reduce usage amounts. It also has a peening effect, which can improve the durability of the material itself. 【Features】 - Improved release properties for rubber molds - Maintenance of edges, coatings, and plating - Enhanced wear resistance, fatigue strength, and sliding properties - Treatment of high-strength, high-brittleness materials is also possible For more details, please refer to the PDF document or feel free to contact us.

Company：不二製作所本社
Price：Other

Other surface treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Blasting Product List and Ranking from 13 Manufacturers, Suppliers and Companies

Blasting Manufacturer, Suppliers and Company Rankings

Blasting Product ranking