Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
391～420 item / All 1314 items
Ideal for machining on NC lathes! A cutter capable of processing very thin workpieces.
The ultra-hard miniature corner rounding cutter 'C-CRC-V' can also process very thin workpieces. It is easy to re-sharpen and is suitable for machining on NC lathes. 【Features】 ■ TiALN coating ■ Special ultra-hard material ■ R chamfering *For more details, please refer to the PDF document or feel free to contact us.
Improved chip removal and cutting performance with a new shape at the tip! A counterbore cutter with excellent wear resistance and rigidity.
The NEW Tornado 'SGLT' achieves an even sharper cutting edge with its dedicated insert. The new flute shape suppresses chip entanglement. A special steel is used for the body, enhancing wear resistance and rigidity. Additionally, the optimal coolant position dramatically improves chip evacuation. 【Features】 ■ The new tip shape significantly improves chip handling and cutting performance. ■ The dedicated insert achieves an even sharper cutting edge. ■ The new flute shape suppresses chip entanglement. ■ Special steel is used for the body, enhancing wear resistance and rigidity. ■ Dramatically improves chip evacuation. *For more details, please refer to the PDF document or feel free to contact us.
We will introduce the compatible sizes for pull bolts and precautions when using pull rounds with a torque wrench.
We would like to introduce the compatible sizes and precautions for the "Plumaru" pull bolt. The compatible sizes for "PM BT40-JIS" include 40PMG, as well as 40PMGH and 40PMGH2, and 40PMGH7. When using this product with a torque wrench, the effective length of a standard torque wrench is between 250mm and 400mm, so the actual tightening torque will be approximately 12% to 24% greater than the set value. Please be careful not to over-tighten when using. *For more details, please refer to the PDF document or feel free to contact us.
Responding to diverse needs with unique know-how! Custom-made high-speed drills.
The "Special HSS Drill" is a custom-made high-speed steel drill that responds to diverse needs with unique know-how. We offer high quality at low prices and have a wealth of experience. Additionally, the range for producing special drills is from φ0.3 to φ50. 【Features】 ■ High quality at low prices ■ Abundant track record ■ Unique know-how to meet diverse needs *For more details, please refer to the PDF document or feel free to contact us.
High precision cutting capability, excellent durability, and low price! For cutting various steel materials and steel pipes, industrial band saw blades.
The "Portable Band Saw" is an industrial band saw blade designed for cutting various steel materials and pipes, featuring high precision cutting capability, outstanding durability, and low cost. It flexibly accommodates various manufacturers and sizes, using high-speed steel for the cutting edge, which is resistant to wear and chipping. It is particularly suitable for cutting thin-walled hollow materials, alloy steel pipes, and shaped materials. 【Features】 ■ High precision cutting capability, outstanding durability, and low cost ■ Flexibly accommodates various manufacturers and sizes ■ Uses high-speed steel for the cutting edge, which is resistant to wear and chipping ■ Particularly suitable for cutting thin-walled hollow materials, alloy steel pipes, and shaped materials *For more details, please refer to the PDF document or feel free to contact us.
The damaged carbide holder is reborn!! The head of the carbide holder is reshaped!
The "Super Hard Holder Regeneration System THE Re BORN" is a system designed to solve problems such as when the head of a super hard holder becomes worn or damaged and can no longer be used, when there is a desire to change the chip shape being used, or when there are holders that are not currently usable for existing processing. The arrangement method is simple: just send the damaged holder, the used chip (even if it has been used), and the name and model number of the manufacturer you wish to regenerate. The damaged head is cut, and the super hard base material is shaped using V-cut. The head part is brazed to allow for the desired chip to be used. 【Features】 ■ Re-shaping of the head part of the super hard holder ■ Simple arrangement method ■ Ability to change chip shapes, such as from CCMT to TPMT *For more details, please refer to the PDF document or feel free to contact us.
High lubrication, high cooling, high penetration, suppressing the cutting edge configuration, achieving clean cutting!
The "Tapping Clean Spray" achieves clean cutting without chlorine. It does not contain heavy metals or triethylamine. With moderate viscosity, it adheres well to the necessary areas and maintains lubrication. Not only does it significantly extend tool life by reducing heat generation at the cutting edge, but it also quickly penetrates the cutting edge to suppress built-up edge formation, minimizing burr generation and enabling a clean finish. It can be used on metals such as stainless steel, titanium alloys, iron, and aluminum. 【Features】 ■ Chlorine-free ■ Reduces heat generation at the cutting edge ■ Suppresses built-up edge formation ■ Extends tool life *For more details, please refer to the PDF document or feel free to contact us.
If you're looking for a significant increase in cutting speed, be sure to try "SY Cut"!
"NICHOLSON" is a carbide rotary bur with a wide range of lineup. You can choose from "Double Cut," "SY Cut," "Single Cut," and "Aluminum Cut," depending on your application. Additionally, we offer a variety of shapes such as "Cylindrical," "Cylindrical with Rounded End," and "Ball." The materials include detailed specifications and dimensions for each product. 【Lineup】 ■ Double Cut ■ SY Cut ■ Single Cut ■ Aluminum Cut *For more details, please refer to the PDF document or feel free to contact us.
The adoption of X-shaped thinning enables high-precision drilling!
The Cobalt High SUS End Mill Shank Drill "NC-SUS-SDS-G" has achieved high-precision drilling and improved rigidity and machining efficiency by adopting an X-shaped thinning design. We offer a rich lineup of products. 【Features】 ■ Adoption of X-shaped thinning ■ High-precision drilling and end mill shank ■ Realization of high rigidity and improved machining efficiency ■ Compatible with a wide range of materials including various stainless steels, general steels, cast iron, and aluminum *For more details, please refer to the PDF document or feel free to contact us.
Achieving overwhelming cost performance!
The Cut Mill Non-Coated High-Speed Steel 2-Flute End Mill "IHEM2S" - New size added! ● Demonstrates a wide range of cost performance from general-purpose machines to machining centers! ● Can be widely used for groove, side, and hole machining. * For more details, please refer to the PDF document or feel free to contact us.
Achieves high centripetal force and low resistance with a unique blade tip shape! Exceptional chip handling and discharge with a unique flute design!
Non-Coat Ultra-Hard Straight Shank Drill 'C-SD' ● Unique cutting edge shape that achieves high centering and low resistance. ● Unique flute shape that ensures excellent chip handling and discharge. ● Reinforced corners to reduce chipping during processing. * C-SD 010 to C-SD 019 have a reamer shape. * For other details, please refer to the PDF document or feel free to contact us.
Short blade length and overall length, perfect for use on automatic lathes!
The shank diameter for a blade diameter of φ10 or less is φ6 and can be used with an ER11 collet. The new Vc coating offers significantly higher hardness (approximately 3000 HV) and oxidation onset temperature (approximately 800°C) compared to the conventional V1 (TiAlN coating), resulting in even longer tool life. 【Features】 ■ AlTiN coating ■ Ultra-fine particle carbide ■ Groove machining ■ Side machining ■ Helix angle of 35° ■ Gash land *For more details, please refer to the PDF document or feel free to contact us.
The highly praised chamfering series now has a new type with a carbide shank attachment!
The adoption of a carbide shank allows for long protrusion machining! All heads and shanks are equipped with coolant holes for excellent chip removal! By preparing spare heads and attaching inserts, work efficiency can be improved! Carbide Shank ITS ITS12-M6-L100-C ITS12-M6-L150-C ITS16-M8-L100-C ITS16-M8-L150-C ITS20-M10-L100-C ITS20-M10-L150-C Super Chamfer Round IMTMS IMTMS6.5-45°-M8 IMTMS9-45°-M10 Super Chamfer Round Zero IZERO IZERO-45°-M6 Double-Sided Cutter IDFC IDFC20-M6 *For more details, please refer to the PDF document or feel free to contact us.
It can be applied to processes other than sculpting, and there may be unexpected uses! The dedicated insert significantly reduces the occurrence of burrs.
When it comes to engraving, it is often thought that specialized machines and tools are used, or that it is simply done with a ball end mill. However, THECUT engraving cutter, with its specialized inserts, allows for processing characters with a minimum width of 0.5mm even on general machining centers. Additionally, it is capable of performing 60° hole chamfering and outer edge chamfering. 【Features】 - Usable on general machining centers. - Capable of engraving with a minimum character width of 0.5mm. - Capable of 60° hole and outer edge chamfering. *For more details, please refer to the PDF document or feel free to contact us.
Achieving overwhelming cost performance!
The Cut Mill High-Speed 2-Blade Coated End Mill "IHEM2S-S" With the new coating: ● High-speed machining is possible! ● Tool life is significantly increased! ● Demonstrates a wide range of cost performance from general-purpose machines to MC! ● Can be widely used for grooving, side machining, drilling, and more. *For more details, please refer to the PDF document or feel free to contact us.
Good news for those struggling with chamfering! With chamfering on both the front and back, you no longer need to flip the workpiece.
THECUT DFC cutter is a must-see tool for those who have thought that they need to flip the workpiece to perform chamfering on both the front and back sides. It allows for chamfering on both the front and back sides while keeping the workpiece fixed, and it can also perform V-groove machining on the side. Additionally, the insert can be used on four corners, making it economical. 【Compatible Processing Range】 ■ Maximum Outer Diameter: φ9 to φ20 ■ Minimum Processing Diameter: Front (φ6 to φ14), Back (φ8 to φ20.5) ■ Maximum C Chamfering Amount: Front (C2.3 to C2.8), Back (C1.18 to C2.97) *For more details, please refer to the PDF document or feel free to contact us.
This is a drill and counterbore cutter (sinking mill) that can simultaneously drill and counterbore hexagon socket bolts (cap bolts).
The "CBDR-V" drill-equipped sink milling cutter for cap bolts allows for simultaneous drilling and counterboring, significantly reducing the work process time. ■ The adoption of TiALN (titanium aluminum) coating greatly increases the lifespan. ■ A wide range of sizes is available to accommodate bolts from M3 to M16. *For more details, please refer to the PDF document or feel free to contact us.
I put the Mimanwa tap and the powerful drill bit into an easy-to-use steel case.
The "TAP + Powerful Drill Set (Kirimaru) 21-Piece Set 'TAP + TC-SSD SET-21'" is a product that combines the spiral taps and point taps from Yamamanwa with a powerful drill. It includes 7 types of taps ranging from M3 to M12, along with drill bits for pilot holes in each size. *For more details, please refer to the PDF document or feel free to contact us.*
Improved lifespan with TiAlN coating! Capable of processing a wide range of workpieces from raw materials to alloy steel!
Introducing our "The Cut Mill Carbide 2-Flute End Mill." It is capable of machining a wide range of workpieces from raw materials to alloy steel. The TiAlN coating enhances tool life and achieves overwhelming cost performance. 【Features】 ■ Sharp corners ■ TiAlN coating ■ Ultra-fine particle carbide ■ Groove machining ■ Side machining ■ Helix angle 35° *For more details, please refer to the PDF document or feel free to contact us.
Adopting a special coating that is difficult to melt! Achieving a wide range of processing areas from raw materials to hard-to-cut materials.
The Cut Mill's ultra-hard 5-blade high-hardness high-helical ball end mill 'IC5MBS' achieves a wide range of machining areas from raw materials to difficult-to-cut materials. It features excellent wear resistance and heat resistance, utilizing a special coating that provides good sliding and is difficult to weld. With its innovative blade shape and superior carbide plus special coating, it enables high-speed and high-feed machining. 【Features】 ■ Excellent wear resistance and heat resistance, with good sliding ■ Utilizes a special coating that is difficult to weld ■ Achieves a wide range of machining areas from raw materials to difficult-to-cut materials ■ Enables high-speed and high-feed machining with innovative blade shape and superior carbide plus special coating *For more details, please refer to the PDF document or feel free to contact us.
Compatible with JAM CC02 type! Excellent durability coating ultra-hard cylindrical spiral cutter.
The coated ultra-hard cylindrical spiral cutter "TCC-G" offers excellent durability and achieves a beautiful finished surface. It is suitable for materials such as general steel and special steel. Compared to genuine products, it provides outstanding cost performance. 【Features】 ■ TiN coating ■ 45° chamfering *For more details, please refer to the PDF document or feel free to contact us.
High-speed processing is possible! Tool life has also significantly increased!
The carbide-coated point set drill "C-NC-PSD-S" is a carbide point set drill that allows for high-speed machining compared to high-speed steel (TiAlN) point set drills. Tool life has also been significantly improved. It is suitable for general steel and can also be used for alloy steel and other materials. 【Features】 ■ Fine particle carbide + AlCrN coating ■ Hole chamfering *For more details, please refer to the PDF document or feel free to contact us.
A new type of sheet cutter with a carbide shank attachment has been born, receiving great reviews!
By adopting a carbide shank, long protrusions in machining are possible! All heads and shanks come with coolant holes, ensuring good chip removal! By preparing spare heads and attaching inserts, work efficiency can be improved! Carbide Shank ITS ITS16-M8-L100-C ITS16-M8-L150-C ITS20-M10-L100-C ITS20-M10-L150-C *For more details, please refer to the PDF document or feel free to contact us.
The explanatory manga of King Adjusta is complete!! It clearly explains the features in a manga format!
Attention all users of general-purpose lathes and CNC lathes! A holder that overturns the concept of external diameter holders? What is the "Adjuster King"? 【Key Points】 ■ Easily adjustable center height ■ Maximizes the performance of inserts ■ Special adaptations allow for the production of grooving and parting types as well.
Astonishing "Z"
● The unique cutting edge design enables plunge machining in the Z direction. ● The uneven lead reduces cutting resistance and chatter during machining. ● Excellent chip evacuation. ● Suitable for high-speed machining and heavy cutting.
A 90° chamfer milling cutter developed by a German global manufacturer with over 125 years of history.
A 90° chamfer milling cutter that enables long life and smooth cutting with minimal wear, ideal for chamfering, deburring, and contour machining. It features conical grinding for high cutting edge rigidity and can accommodate a wide range of work materials. It uses a coating with excellent wear resistance. *For more details, please refer to the PDF document or feel free to contact us.*
A JIS spiral tap "Standard Pitch, Blind Hole, for Stainless Steel" developed by a German global manufacturer with over 125 years of history.
This is a high-quality JIS standard tap series that combines over a century of expertise in tool materials and manufacturing technology from Guhring, along with its own developed coating technology. Tool Material: HSS-E (High-Speed Steel) Application: Spiral tap for blind holes Screw Type Symbol: M (Coarse) Applicable Material: For stainless steel *For more details, please refer to the PDF document or feel free to contact us.
We offer a wide range of products such as "cutting tools" and "machine tools"!
Our company handles tools, equipment, and materials tailored to various applications. We offer a wide range of products, including "cutting tools" such as files and hole saws, as well as "measuring tools" and "electric and pneumatic tools." If you have inquiries about items not listed, please feel free to consult with us, and we will help you find what you need. 【Products We Handle (Partial List)】 ■ Cutting Tools ■ Hand Tools ■ Measuring Tools ■ Electric and Pneumatic Tools ■ Medical Research Equipment and Scientific Instruments *For more details, please refer to the PDF materials or feel free to contact us.
We introduce tool cases, waist bags, nail bags, work belts, and more.
Okada Manufacturing Co., Ltd. Product Handling Comprehensive Catalog introduces a variety of products from the OKA series, including "work belts" that consolidate items like tool pouches and nail bags, "work bags" that are convenient for organizing delivery slips and light tasks, "nail bags" designed for carpenters and craftsmen, and "waist bags" tailored for professionals in electrical work. These products feature bright gray linings in the pockets for better visibility of stored tools, along with thoughtful specifications in the pocket designs. [Featured Products] ○ Work Belt ○ Work Bag ○ Nail Bag ○ Waist Bag, etc. For more details, please contact us or download the catalog.
![Cutting Tools Comprehensive Catalog [Digest Edition]](https://image.mono.ipros.com/public/product/image/140/2000405809/IPROS5477755260814734949.GIF?w=280&h=280)
Double-speed cutting! Tools suitable for turning, grooving, and other machining processes are listed.
This catalog is a comprehensive catalog (digest version) of Tungaloy Corporation, which manufactures and sells carbide cutting tools. It includes tools for turning operations, ISO inserts, as well as grooving tools, turning tools, drilling tools, and more. Please feel free to contact us if you have any requests. [Contents] ■ Material types (tool materials) ■ TurnLine (tools for turning operations) ■ GrooveLine (tools for grooving operations) ■ MillLine (tools for turning operations) ■ DrillLine (tools for drilling operations) ■ ToolLine (tooling systems) *This catalog is a digest version. If you need the full version, please contact us. *For more details, please download the PDF or feel free to contact us.
