Induction Heating Equipment Product List and Ranking from 67 Manufacturers, Suppliers and Companies

High-frequency nut heater

By heating the nut that has become stuck due to rust, corrosion, or burning, it can be easily loosened.

Introducing the "High-Frequency Nut Heater." Traditionally, nuts that have become stuck due to rust, galling, or seizing were heated with gas to expand the nut and create a gap in the threads to loosen it. By using induction heating, nuts can be easily heated in a short amount of time, simplifying the work and reducing time spent. By determining the heating conditions, it is possible to heat at the same temperature, which may allow for the reuse of nuts depending on their condition and the heating temperature. 【Features】 ■ Easily heat nuts in a short time using induction heating ■ Simplifies work ■ Reduces time *For more details, please refer to the PDF document or feel free to contact us.

Company：第一高周波工業新事業推進部営業部
Price：Other

Machinery and equipment installation/dismantling/relocation
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Boiler tube extraction device for heat exchanger tubes

Reduction of working hours and improvement of quality! For boilers in thermal power plants, self-generating plants, clean centers, etc.

"High-Frequency Tube Removal" is used for the relaxation and removal of tubes installed by expanding the tube hole. By using induction heating, the tube is heated in a short time, significantly reducing the working time. Additionally, there is no damage to the tube hole, and there is minimal contraction of the tube hole or deformation of the body. This method using induction heating does not use any open flames, improving the working environment and allowing anyone to perform the work reliably. 【Features】 ■ Time Reduction: Induction heating allows for rapid heating of the middle section, greatly shortening the working time. ■ Quality Improvement: No damage to the tube hole, with minimal contraction or deformation of the tube hole. ■ Safety: No flames used, eliminating the risk of oxygen deficiency in confined spaces. ■ Operability: Reproducibility of processing conditions, no need for skilled workers. ■ Working Environment: No generation of waste heat, radiant heat, noise, or dust, ensuring a clean environment. *For more details, please refer to the PDF document or feel free to contact us.

Company：第一高周波工業新事業推進部営業部
Price：Other

Heating device
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tabletop high-frequency induction heating device "HEATCUBE" *Consultation for melting tests available

A heating device that allows for small-scale metal heating and melting on a tabletop! It achieves miniaturization and cost reduction, making it perfect for metal heating and melting tests in the research and development stage!

The tabletop high-frequency induction heating device "HEATCUBE" is designed for ultra-compact use, allowing for the heating and melting of small amounts of metal on a tabletop. Since the heated material itself generates heat, the heating efficiency is extremely high, achieving energy savings. Additionally, because it does not use flames, it contributes to CO2 reduction. It is perfect for heating and melting tests in research and development stages. 【Features】 ■ Allows for the heating and melting of small amounts of metal on a tabletop ■ Achieves very high heating efficiency and energy savings ■ Contributes to CO2 reduction as it does not use flames ■ Ideal for heating and melting tests in research and development stages *For more details, please request materials or view the PDF data available for download.

Company：TAMAGAWA ENGINEERING CO., LTD.
Price：Other

Heating device
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] About High-Frequency Induction Heating Devices

If an environmental tax (carbon tax) is introduced, the advantage of the running costs for induction heating will increase even further!

To generate high-frequency electric current, high-speed operating power semiconductor devices are essential. This document introduces topics such as "the principle of electric heaters," "the principle of induction heating," "the equivalent circuit of induction heating," and "the principle of IH cooking heaters." Please feel free to download and take a look. 【Contents (partial)】 ■ Principle of electric heaters ■ Principle of induction heating ■ Everyday applications of induced currents (transformers on utility poles) ■ Equivalent circuit of induction heating ■ Principle of IH cooking heaters *For more details, please refer to the PDF document or feel free to contact us.

Company：TAMAGAWA ENGINEERING CO., LTD.
Price：Other

Heating device
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Induction Heating Device

Numerous achievements in the introduction of induction heating equipment to overseas universities and research institutions!

The Japanese government's development aid project introduced an atmospheric dissolution furnace system to a university in Egypt. *For more details, please refer to the PDF document or feel free to contact us.*

Company：TAMAGAWA ENGINEERING CO., LTD.
Price：Other

Heating device
Induction Heating Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-frequency induction heating device

Flexible power design! We offer EHG type, EHG-S type, and standard power supplies.

We would like to introduce the "high-frequency induction heating equipment" that we handle. Induction heating technology is widely used in the industrial sector due to its excellent characteristics, such as high heating efficiency, high reliability, and the realization of a clean working environment. SKS's high-frequency power supply has achieved high performance, high quality, and low cost through numerous technological innovations, and is adopted for various applications according to needs. Please feel free to contact us when you need assistance. 【Features】 ■ Compact and lightweight ■ Instant heating capability ■ Uniform heating capability ■ Easy automation ■ Localized heating capability *For more details, please download the PDF or feel free to contact us.

Company：藤川伝導機
Price：Other

Heating device
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic Knowledge of Microwave Heating

Microwaves are a type of radio wave, and radio waves are a type of electromagnetic wave!

Microwaves are a type of radio wave, and radio waves are one type of electromagnetic wave. Electromagnetic waves propagate through the interaction of electric and magnetic fields, which allows them to travel even in a vacuum. Since electromagnetic waves are "waves," they have two elements: wavelength and frequency. Wavelength is the length from peak to peak of the wave, while frequency indicates the number of waves that occur in one second. The speed of electromagnetic waves is constant at about 300,000 km/s, regardless of frequency, so dividing this speed by the frequency gives the wavelength. The name of electromagnetic waves changes according to their frequency, and they are used for various applications based on their characteristics. Light is also a type of electromagnetic wave. Electromagnetic waves below 3000 GHz are classified as radio waves. Radio waves with frequencies from 300 MHz to 300 GHz (wavelengths from 1 m to 1 mm) are called microwaves. Microwaves are used not only for communication but also for astronomical observations with radio telescopes, monitoring moving objects with radar systems, and positioning systems using GPS in car navigation. For more details, please contact us or download the catalog.

Company：ミクロ電子本社
Price：Other

High frequency/microwave parts
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fuji Electric Industry Co., Ltd. Business Introduction

The application technology of high-frequency induction heating in automobiles, machine tools, and other fields spans various industries.

Fujii Electronics Industry Co., Ltd. has been a manufacturer of high-frequency induction heating equipment for over 60 years since its establishment. We have responded to the needs of customers across a wide range of industries, including automotive, machine tools, and construction machinery, not only with the technical expertise we have accumulated over the years but also by maximizing the advantages of induction heating that align with the times, such as improving productivity through reduced energy consumption. In recent years, the environmentally friendly and rational advantages of induction heating have attracted attention in new industries, and new opportunities are expanding. 【Business Activities】 ■ Contract processing for high and medium frequency heat treatment ■ Manufacturing and sales of high-frequency induction heating equipment and its components ■ Manufacturing and sales of transistors, inverters, and their components ■ Manufacturing and sales of electronic application devices ■ Manufacturing and sales of various automatic machines and equipment related to induction heating *For more details, please refer to the PDF materials or feel free to contact us.

Company：富士電子工業
Price：Other

Other processing machines
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Solution through IH Heat Treatment] Hardness is not achieved.

If the material structure is not appropriate, no matter how much you harden it, the hardness will not increase!

We would like to introduce a case study from Fuji Electric Industry, which has always been committed to solving the technical challenges faced by our customers as an expert in IH heat treatment. In this case, FCD600 material is used. High-frequency quenching, which allows for processing in a short time, is characterized by being more susceptible to the effects of material, such as segregation, compared to atmosphere heat treatment like carburizing furnaces. There are instances where the quality of heat treatment is affected by the material, and especially for castings, there tends to be greater variability between lots compared to other steel materials. 【Case Overview】 ■ Material: FCD600 ■ Hardness Standard: HRC 46 or higher *For more details, please refer to the PDF document or feel free to contact us. ★ For inquiries by phone, please call: Osaka Headquarters → TEL: 072-991-1361 Nagoya → TEL: 052-322-1361 Tokyo → TEL: 03-5472-1361 *When calling, please mention that you saw this on "Ipros." Response hours: Monday to Friday, 9 AM to 5 PM.

Company：富士電子工業
Price：Other

Processing Contract
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Solutions through IH Heat Treatment] Want to improve productivity and quality.

Introducing a case where quality and productivity were improved through one-shot hardening with semi-open coils!

Traditionally, workpieces were moved and subjected to low-speed quenching, taking 360 seconds per piece to quench a single workpiece. This allowed for only 10 pieces to be processed per hour, which posed a challenge due to low productivity. Therefore, we adopted our one-shot heating immersion quenching. The heating time is significantly shorter compared to moving quenching, reducing the cycle time to 90 seconds per piece, which is one-fourth of the conventional time, achieving a substantial increase in production capacity. [Case Study] ■ Challenge: Low productivity, processing only 10 pieces per hour ■ Proposal: Adoption of one-shot heating immersion quenching ■ Result: Achieved a significant increase in production capacity *For more details, please refer to the PDF document or feel free to contact us. ★ For inquiries by phone, please call: Osaka Headquarters → TEL: 072-991-1361 Nagoya → TEL: 052-322-1361 Tokyo → TEL: 03-5472-1361 *When calling, please mention "Ipros" as a reference. Response hours: Monday to Friday, 9 AM to 5 PM.

Company：富士電子工業
Price：Other

Processing Contract
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Environmental benefits of IH heat treatment

Heating only the necessary parts in a short time! Introducing the environmental benefits of IH heat treatment.

We would like to introduce the environmental benefits of our IH heat treatment. By adopting high-frequency quenching, we achieve high energy utilization efficiency, heating only the necessary parts in a short time. This allows us to minimize heat generation due to electrical energy loss. Additionally, since we use only electricity without fossil fuels, we are considerate of the environment. The ability to miniaturize components also leads to a reduction in material resources. 【Features】 ■ Heats only the necessary parts in a short time ■ Enables miniaturization of components ■ Reduces material resources ■ Saves energy and cooling water needed for cooling ■ Requires less electricity *For more details, please refer to the PDF document or feel free to contact us. ★ For inquiries by phone, please call: Osaka Headquarters → TEL: 072-991-1361 Nagoya → TEL: 052-322-1361 Tokyo → TEL: 03-5472-1361 *When calling, please mention "Ipros" for reference. Response hours: Monday to Friday, 9 AM to 5 PM.

Company：富士電子工業
Price：Other

Processing Contract
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Martensite and residual austenite

Is retained austenite a villain?

First, by heating iron above the transformation point temperature, it is converted into an austenite structure, allowing many carbon atoms to enter the iron atoms. Next, by rapidly cooling it, a very hard structure (martensite structure) is formed, in which many carbon atoms are trapped within the iron atoms in a cramped arrangement. This is called martensitic transformation, and the hardness after quenching increases with the amount of carbon. When cooling from austenite, the faster the cooling rate, the more martensite structure is formed. The temperature at which martensitic transformation occurs, known as the Ms point, decreases with an increasing amount of carbon, and the temperature at which the transformation ends, known as the Mf point, also decreases. The austenite structure that could not transform remains as "residual austenite." If left alone, residual austenite may gradually transform, potentially causing issues such as distortion or cracking. Therefore, it is necessary to forcibly transform it into martensite or stabilize the structure. However, since residual austenite has a lower hardness compared to martensite, in cases where wear resistance is required, such as on gear tooth surfaces, the sliding properties of residual austenite may also contribute positively.

Company：富士電子工業
Price：Other

Steel
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-frequency hardening device

We provide equipment tailored to needs, such as mass production devices for automotive parts and large quenching devices for construction machinery.

Our company manufactures and sells "quenching equipment" utilizing high-frequency induction heating. We provide custom-made equipment that pursues high quality and high productivity, such as devices for mass production of automotive parts and large rotary wheel quenching equipment for construction machinery. We also offer heat treatment equipment for processes other than quenching, including brazing, shrink fitting, annealing, and forging. 【Example of Production: Crankshaft Quenching Equipment】 - Quenching is performed while following the rotating workpiece with a semi-open coil, suppressing distortion. - A coil and a thin disk transformer are used to achieve a quenching width of 10.5 mm. - The power reduction method allows for adjusting the output according to the rotation angle of the workpiece, enabling control of the hardened layer depth. ★ We are currently offering materials that introduce points to note during cooling in high-frequency quenching. You can view them immediately by clicking the download button. ★ For inquiries by phone, please contact us here: Osaka Headquarters → TEL: 072-991-1361 Nagoya → TEL: 052-322-1361 Tokyo → TEL: 03-5472-1361 *When calling, please mention "Ipros" as your reference. Business hours: Monday to Friday, 9 AM to 5 PM.

Company：富士電子工業
Price：Other

others
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study 5 on Heat Treatment Challenges] A must-see for those troubled by cracking!

"One-shot quenching" significantly reduces heating time, contributing to increased productivity!

Steel may seem very sturdy and stable, but if the heat treatment conditions or management methods are incorrect, it can easily crack. Many cracks are so small that they cannot be seen with the naked eye, and if used without noticing them, they can lead to damage starting from the cracks, potentially resulting in serious accidents. With Fuji Electronic Industry's one-shot quenching, it is possible to achieve a uniform hardened layer through overall heating/cooling with coils that follow the profile. Since the heating time is significantly reduced, the cycle time is less than half compared to conventional moving quenching, contributing to increased productivity. *For more details, please refer to the PDF materials or feel free to contact us.

Company：富士電子工業
Price：Other

Processing Contract
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

A must-see for those who own a vacuum tube oscillator! Introducing the disposal of PCB waste.

If you have been using a vacuum tube oscillator for many years, it is necessary to check it once! This explains the dangers of contaminated electrical equipment on PCBs.

This document provides an explanation of low-concentration PCB waste. If you have been using a vacuum tube oscillator that has been in use for many years, it is necessary to check it once. It includes the dangers of electrical equipment contaminated with PCBs, as well as the procedures from investigation to disposal, investigation methods, and investigation procedures. Additionally, it introduces information about PCBs, how to identify them, and notification processes. You can also find contact information for inquiries regarding the PCB Special Measures Law, making this a useful resource when disposing of low-concentration PCB waste. 【Contents (partial)】 ■ Check now! Looking for these electrical devices ■ Dangers of electrical equipment contaminated with PCBs ■ Procedures from investigation to disposal of low-concentration PCB waste, etc. ■ Investigation methods ■ Investigation procedures *For more details, please download the PDF or feel free to contact us.

Company：富士電子工業
Price：Other

Other services
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explanatory Material: "High-Frequency Hardening Varies Depending on the Method (Basic Knowledge Edition)"

An environmentally friendly hardening method that contributes to a low-carbon society without the need for fossil fuels!

Our company, which specializes in the design and manufacturing of high-frequency hardening equipment, as well as prototype production and contract processing, is currently offering the document "High-Frequency Hardening Changes Depending on the Method (Basic Knowledge Edition)." This document provides detailed explanations on how to determine whether an object is suitable for high-frequency hardening, as well as the mass effects, shape effects, and dimensional effects that vary depending on the material and heat treatment methods. Additionally, it includes a hardness conversion table, making it a useful reference. We encourage you to download it and read through it. [Contents] ■ What is hardening? ■ What parts are suitable for high-frequency hardening? ■ What are mass effects, shape effects, and dimensional effects? ■ Bonus *For more details, please download the PDF or feel free to contact us.

Company：富士電子工業
Price：Other

Processing Contract
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explanatory Material "High-Frequency Quenching Varies Depending on the Method (Integrated Edition)"

We will easily introduce basic knowledge as well as cooling and cracking!

Our company, which specializes in the design and manufacturing of high-frequency hardening equipment, as well as prototype production and contract processing, is currently offering the document "High-Frequency Hardening Changes Depending on the Method (Integrated Edition)." This document provides detailed explanations on various topics, starting with the "Introduction" section, which covers confirming the hardening range and deciding on hardening plans, and moving on to the "Level-Up" section, which addresses methods for dealing with large distortions and handling cracks (cracking due to cooling). It includes illustrations and images for clarification, making it a valuable reference. We encourage you to download it and read it. 【Contents】 ■ Basic Knowledge Section ■ Introduction Section ■ Level-Up Section ■ Cooling Section 1, 2 ■ Cracking Section 1, 2 *For more details, please download the PDF or feel free to contact us.

Company：富士電子工業
Price：Other

Processing Contract
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brochure "Five Key Points to Keep in Mind When Introducing a Quenching Machine"

Explaining key points to keep in mind when renovating or newly installing heat treatment equipment! Detailed explanations on heat treatment plans, pre-production trials, utilities, and more.

In this book, we explain the "optimal equipment design" and "key points for introducing hardening equipment," which are unique to Fuji Electronic Industries, a company that has been involved in the introduction of hardening equipment across various industries. [About the booklet] ■ Confirmation of introduction timing and target work ■ What are the key points of the hardening plan? ■ Is it better to conduct preliminary trials? ■ Key points for utility selection ■ Related legislation and how to respond Fuji Electronic has a wealth of know-how regarding various hardening equipment. We also have many materials related to high-frequency hardening. *For more details, please download the PDF or contact us directly.

Company：富士電子工業
Price：Other

Machinery and equipment installation/dismantling/relocation
High frequency/microwave parts
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inkjet printer ordinary paper MS-64 A1 roll

Highly acclaimed plain paper, a staple product.

Due to our overwhelmingly low prices and high quality, many customers have purchased from us. By directly sourcing from domestic manufacturing plants, we are able to deliver products to our customers at a lower price.

Company：松原商事
Price：Less than 10,000 yen

Other consumables
Induction Heating Equipment

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

New Vacuum Steam Heating and Cooling System "WW EvaCon Evaporation Plus"

It is a jacketed sealed vacuum steam system.

The Wall Wetter has further evolved its superior functions such as "shortening evaporation, heating, and cooling times," "reduced scorching," "operation with small amounts of liquid," and "mixing of two liquid phases." It is a jacket-sealed vacuum steam system. This allows for the use of condensation and evaporation heat transfer involving phase changes, enabling rapid heating and rapid cooling of the main liquid. The use of Wall Wetter ensures that 100% of the heat transfer surface is utilized, stabilizing temperature control. 【Features】 ○ Rapid Heating → Saturated steam is always present at a vacuum level appropriate for the temperature → Jacket heat transfer media can include water and other high-boiling-point heat media ○ Rapid Cooling → Enclosed vapor condenses and flows down to the heat transfer surface → Evaporative cooling occurs due to pressure drop For more details, please contact us or download the catalog.

Company：関西化学機械製作
Price：Other

Heating device
Cooling system
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-frequency heating device

Heating equipment that achieves a clean production line.

The "High-Frequency Heating Device" from Showa Machinery Trading Co. is a product that enables rapid heating, has low heat loss, and high thermal efficiency. It allows for high-temperature heating with minimal scale generation in steel heating. Electric energy can be directly supplied to the material (converting electrical energy into thermal energy). Losses are limited to copper losses in the heating coil (mainly copper pipes), making it highly efficient. It features contactless heating, eliminating the need for contacts and preventing damage to the material surface from sparks and other issues. 【Features】 ■ Localized heating is possible With no unnecessary parts, thermal efficiency is high, and by selecting the frequency, heating can be achieved to the required depth. ■ Easy and rapid temperature control Temperature can be controlled by regulating the power supply voltage. ■ Oxidation-free heating Heating can be performed in a vacuum or atmosphere, making it effective for heating active metals and special metals.

Company：昭和機械商事水処理グループ
Price：Other

Heating device
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-frequency induction heating device, tabletop manual type "SF-DRU-1.2K"

A lightweight and compact baking device that is gentle on the environment and workers, suitable for any workspace.

The high-frequency induction heating device, tabletop manual type "SF-DRU-1.2K," is a lightweight and compact heating device that is gentle on both the environment and the operator, making it suitable for any workspace. It allows for the attachment and detachment of carbide cutting tools with shank diameters ranging from Ø4 to Ø12 using one standard accessory coil. Operation is simple; just set the appropriate heating time for the tool holder in advance, eliminating the need for complicated adjustments. 【Features】 ○ Gripping diameter Ø4 to Ø12 ○ Simple operation For more details, please contact us or download the catalog.

Company：聖和精密工機
Price：Other

Heating device
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-frequency heating device

There are types for small paths and types with coil replacement! A wide variety of shrink holder series is also available.

We would like to introduce our "high-frequency heating devices." We offer the "SF-DRU-6K" type for small diameters and the coil exchange type "SF-DRU-6K2." Additionally, we have the NS type with a 3° slope and slim shape, the TY type for 5° slope mold processing, and the joint type that excels in heavy cutting, all part of our shrink holder series. Please feel free to contact us if you have any inquiries. 【Shrink Holder Series List】 ■ NS Type ■ TY Type ■ N Type ■ Joint Type ■ ST Type *For more details, please refer to the PDF materials or feel free to contact us.

Company：聖和精密工機
Price：Other

Heating device
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-frequency heating adhesive machine 'TECNOGAN/TECNOIRON'

A lightweight, portable high-frequency compact heating adhesive machine that operates on a household power supply of 100V!

"TECNOGAN/TECNOIRON" is a lightweight, high-frequency compact heating adhesive machine. It can be used with a household power supply of 100V. The tip iron part and gun can be easily exchanged with a single touch. No preheating is required, and heating work can be performed immediately after turning on the power. It comes standard with an automatic tuning device, eliminating the need for troublesome adjustments. [Features] ■ Lightweight type ■ Usable with a household power supply of 100V ■ Tip iron part and gun can be exchanged with a single touch ■ No preheating required ■ Standard equipped with an automatic tuning device *For more details, please refer to the PDF document or feel free to contact us.

Company：奥田機械
Price：Other

Other processing machines
Heating device
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Induction Heating Jacket Roll

High-precision thermal processing made possible by unique technology! Jacket rolls that produce uniform products.

The "Induction Heating Jacket Roll" utilizes a unique induction heating technology to heat the roll itself, while the jacket provided on the roll shell enables ultra-high precision thermal processing that maintains the surface temperature of the roll within ±0.5℃. This technology allows for the production of uniformly consistent products. The induction heating method heats the roll itself through the action of the magnetic field created by electricity. High-temperature thermal energy can be obtained with high precision in 1℃ increments, ranging from 40 to 420℃. 【Features】 ■ Wide range of temperature settings ■ Achieves uniform surface temperature distribution ■ Electric operation is simple and space-saving ■ Clean and maintenance-free For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Other processing machines
Food Packaging Machinery
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Converting Roll

Creating diverse composite materials! A jacket roll that combines different materials to produce new substances.

In dry lamination and solvent-free lamination, precise temperature control is required depending on the composite materials and adhesives used. The "jacket roll" maintains a uniform surface temperature with fine adjustments of 1°C across all temperature ranges, allowing for the seamless bonding of various materials such as polyester, polyethylene, polypropylene, resin films, aluminum foil, paper, and steel plates, resulting in a wide variety of composite materials. [Main Applications] - Containers for snacks and cup noodles - Food packaging materials for retort products - Electronic component materials (printed circuit boards, lead frames) - Agricultural and industrial materials such as vinyl houses - Beer and juice cans, among others For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Other processing machines
Food Packaging Machinery
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Paper and Calendar Rolls

We create the ideal paper! Rolls that achieve high-precision high-temperature calendering.

Until now, the calendar rolls used in the paper manufacturing process, which relied on steam or oil heating, had the drawback of reducing the strength of the paper due to low-temperature, high-pressure nip processing. This issue has been resolved by the "Jacket Roll." With an induction heating mechanism that allows for flexible temperature settings by heating the roll itself, and a heat pipe mechanism that ensures uniform temperature across the entire surface of the roll, high-precision high-temperature calendering is achieved. This creates "ideal paper" that combines excellent printability, strength, and thickness. 【Main Applications】 ■ Soft Calendar ■ Hard Nip Calendar ■ Machine Calendar ■ Super Calendar For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Other processing machines
Paper Converting Machinery
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-High Precision Induction Heating Jacket Roll

A jacket roll that achieves a temperature distribution within ±0.5℃ at a roll surface temperature of 250℃.

The "Ultra High Precision Induction Heating Jacket Roll" has made high-temperature precision processing in clean rooms, where the installation of oil rolls is difficult, possible. With a safe and clean electric control that does not use combustible materials, it exhibits excellent characteristics for processing optical films requiring nanometer-level thickness precision and food packaging materials. Additionally, it contributes to space-saving in the work environment as it does not require piping or ancillary equipment. 【Features】 ■ Machine accuracy within 0.003mm for both cylindricity and roundness at high temperatures of 250℃ ■ Achieves an ultimate cylindricity, roundness, and runout of 0.002mm at room temperature ■ Prevents minute deformations during calendering and coating ■ High precision temperature distribution within ±0.5℃ at a roll surface temperature of 250℃ For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Coater
Food Packaging Machinery
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-Temperature Induction Heating Roll

Prevent deformation of the roll itself and enable flexible high-temperature processing! A roll that demonstrates excellent performance.

The "High-Temperature Induction Heating Roll" enables use in high-temperature ranges that were difficult with conventional thermal contact circulation or electric heater types, achieving a temperature control accuracy of ±3°C at a maximum roll temperature of 700°C. By using a special heat-resistant wire and dividing the internal coils into multiple segments, we demonstrate excellent performance in temperature distribution control for processes such as steel plate and metal plate thermal processing by individually controlling the power supplied to each coil. 【Features】 ■ High-speed response unique to induction heaters, swiftly adapting to sudden changes in rotation speed and set temperature, regardless of load or no-load conditions. ■ Maintains high precision temperature characteristics. ■ Clean and safe design that does not use combustible materials. ■ Reduction of maintenance time and adoption of self-heating rolls. ■ Achieves high production efficiency and energy savings. For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Other processing machines
Paper Converting Machinery
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Induction Heating Jacket Roll - Energy Saving Case Study

Achieve up to 60% energy savings by using the induction heating jacket roll!

The induction heating jacket roll operates without the need for piping, boilers, or circulation pumps, achieving operation with minimal energy. By eliminating heat loss from piping and the energy consumption of circulation pumps, we have received reports of achieving 60% energy savings compared to oil rolls. (Based on our company's case studies) 【Reduced energy consumption (compared to oil rolls)】 ■ Heat loss energy from piping for heat medium supply ■ Heat loss energy from the boiler itself ■ Heat efficiency loss of the boiler ■ Energy consumption of circulation pumps for oil supply Please feel free to contact us for more details.

Company：トクデン
Price：Other

Heating device
Other processing machines
Food Packaging Machinery
Induction Heating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Induction Heating Equipment Product List and Ranking from 67 Manufacturers, Suppliers and Companies

Induction Heating Equipment Manufacturer, Suppliers and Company Rankings

Induction Heating Equipment Product ranking