サマック Product Lineup

The Finex Separator model from Russell Finex effectively classifies raw materials with up to four mesh sizes. These groundbreaking vibrating sieves are designed to accurately classify and size wet or dry materials into up to five stages in a single operation. Significant advancements in classification technology have led to major improvements in screening accuracy, capacity, noise levels, and upgradeability compared to traditional spring suspension separators.

• Food Processing Equipment
• Sieve/Shaker

The depositor head can be freely moved in 3D (vertical and horizontal) motion. The filling amount is a minimum of 0.01g, allowing for precise and detailed decoration. Thanks to its special technology, two-color decoration is also possible without cooling.

• Food Processing Equipment

Graduating from the conventional coating device "Revolving Pan"! DTG's belt-type coating device allows for an even and beautiful coating of chocolate on products by placing them on the belt. The previous model used small plastic segments connected to form a belt (white), but this type had the drawback of chocolate getting trapped in the segments, making color changes and cleaning difficult. However, DTG's new model (Blue Belt) uses a flat-surfaced plastic belt instead of the segment band, effectively eliminating almost all the shortcomings of the conventional model. ■ Product Features - No seams or hinges on the belt, making it less prone to dirt accumulation! - Integrated belt heater heats the chocolate to its melting point - Easy to wipe off dirt from the belt - Lightweight and easy to remove & replace belt - Reduces chocolate loss For more detailed information, please contact us!

• Food Processing Equipment

You can accurately and quickly top with fine materials such as nuts and granules. The sensor in the discharge section detects products flowing on the belt and fills the topping materials. The internal sensors of the device constantly check the remaining amount in the topping storage tank and replenish it as needed when it runs low. With a minimum of 8 rows and a maximum of 20 rows, it allows for multi-row filling, significantly improving the efficiency of processes that were previously done manually. This device makes tasks that used to be time-consuming and labor-intensive much easier.

• Food Processing Equipment
• Other food machinery

This device is the GET model serial molding machine from the German company K&S. It can mold nuts, cereals, rice crackers, popcorn, etc., into square, round, star, heart shapes, balls, and more! Advantages of the GFT model: - No waste of materials: Broken cookies, rice crackers, etc., can also be utilized!!! - As it is a rotary mold, there are no cut surfaces on the products. - No need for devices like guillotine cutters; just the molding machine is sufficient. - Operated via a touch screen! Recipe management is possible! Easy cleaning! Binders such as sugar-based, chocolate-based, and fruit-based can be used! This device has a demo model available, so testing or rental of the device is possible. Please feel free to consult with us.

• Food Processing Equipment

You can accurately print your preferred design or pattern on the product. A patented sensor detects the product, allowing for precise filling of liquids and sauces. It applies the material from edge to edge without spilling. As a result, it is possible to keep the belt clean without getting it dirty. This also helps prevent waste of raw materials, making it recommended for cost savings and reducing food loss. It can also be used as a depositor.

• Food Processing Equipment

Using centrifugal force, solids are removed from liquid slurries. Mesh sizes are available down to a minimum of 20μ. This is helpful for the recovery of fine and valuable resources. Its high versatility makes it highly effective for the separation of all types of liquid slurries. The processing capacity is approximately 100,000 liters per hour. It can handle large volumes, significantly increasing efficiency compared to existing solid-liquid separation machines. Each unit can achieve the capacity of up to three existing solid-liquid separation machines, making it ideal for capital investment.

• Food Processing Equipment

The overall height is less than half that of conventional screening devices, making it suitable for safely screening powders and liquid slurries at high capacity. In particular, it is ideal when space is limited, and all oversized contaminants are removed from the product, allowing for safe use. Operation and maintenance can be performed quickly and easily, making it perfect for all processing industries. 【Features】 ■ Increases product purity ■ Increases production volume ■ Reduces equipment downtime ■ Reduces dust and volatile substances ■ Lowers noise levels *For more details, please refer to the PDF document or feel free to contact us.

• Sieve/Shaker

The "Self-Cleaning Filter" from Russell Finex in the UK removes oversized impurities from various types of liquids and slurries with extremely high precision. The unique Spiroklene system continuously cleans the surface of the filter element, ensuring ideal filtration efficiency. It allows for uniform and high-flow processing, making it particularly suitable for filling operations and continuous production lines. 【Features】 ■ Powerful impurity removal ■ Quality assurance ■ Operator safety and environmental protection ■ Increased productivity ■ Reduced maintenance costs *For more details, please refer to the PDF document or feel free to contact us.

• Other filters

At your factory, do you have concerns such as "I want to increase production efficiency," "I want to make cleaning easier," or "I want to reduce the number of operators"? Today, I would like to introduce a case study on the implementation of a self-cleaning filter system by Mondelez International, a major global food company. At their plant in Herentals, Belgium, they had been struggling with product loss for many years on the production line of the most famous caramel chocolate bar in Belgium, cha cha. In response, Russell Finex was commissioned to conduct tests on the self-cleaning filter system. As a result of the tests... - They successfully turned high-viscosity caramel into a liquid state. - They successfully separated wafer crumbs from the caramel. These positive results led to the decision to implement the system! With the introduction of this self-cleaning filter, they were able to achieve: - Improvement in waste processing - Improvement in maintenance - Reduction in operator burden - A 20% reduction in product loss.

• Food environmental hygiene/contamination prevention equipment

Do you know that "healthy food" is trending all over the world right now?? Two years have passed since the pandemic, and the opportunity to cook at home has significantly increased, prompting a focus on "health." As a result, the "health-conscious trend" has accelerated, and more people are choosing snacks that consider health. This time, we would like to introduce a device that can mold products specifically focused on "health consciousness." "K&S Company Rotary Molder MFT Model" ● What is MFT? - Molds natural foods such as dates, marzipan, nuts, and fruits - Molds products with a sticky and strong viscosity - Molds that can create various shapes - No binder required - Easy switching of molding rollers - No cut surface on products with rotary molding ● Examples of molding with the MFT molding machine - Protein bars - Bliss balls, etc. We plan to deliver a test machine for the MFT device by the end of September 2022!! If you are interested in renting, please feel free to contact us.

• Food Processing Equipment
• Other food machinery

☆What is laser cleaning:- By irradiating the surface of the base material (target object) with laser light, the laser ablation process is initiated, removing contaminants such as carbides that are adhered to the surface of the base material. <Specifications and Applications> Removal of carbon deposits (burnt residues) and oil residues stuck in ovens, removal of oxide films, etc. <Economic> Environmentally friendly and economical dry cleaning => No need for rinsing or other processes after cleaning.

• Other semiconductor manufacturing equipment

This is a vibrating screening machine from Russell Finex, a leading overseas manufacturer of vibrating screening equipment. It is widely used in factories around the world for powder check screening. The device offers a rich variety of models and can be installed broadly in production processes. A significant feature of this device is that it uses a unique rubber suspension instead of a spring suspension for the screening damper. As a result, compared to the company's spring suspension models: - Capacity: Nearly double the processing capability - Noise: Low noise level (typically around 70 dB) - Cleaning: Can be disassembled and assembled without tools - No areas where water can accumulate, ensuring good drainage By simultaneously using the optional ultrasonic clogging prevention system (VDS), the screening capability for difficult powders that are prone to clogging is enhanced, preventing mesh damage (accurate classification down to a minimum of 20 µm). This device fits neatly into production lines, possesses advanced screening capabilities, and does not require overhead space. Thanks to clever design, it occupies less than half the height of the company's vibrating screening machines. We also have demo units available, so please feel free to consult us!

• Sieve/Shaker

Dedicated Semiconductor Encapsulation Resin "Mold Laser Cleaner IMT1200M" <<< Features >>> ■ No need to remove the mold (Insert the laser head into the mold) □ Removal of mold EMC contamination using laser ■ No need for melamine resin or rubber sheets □ High-speed mold cleaning (4 mold sets in under 30 minutes) ■ Reduction of downtime for mold equipment □ Low maintenance costs ■ No waste or odor after cleaning □ No danger to operators ■ Fully automated process □ No damage to the mold

• Molding Equipment

This is a highly versatile device that is ideal for filtering all types of liquids. Its completely sealed structure ensures product quality while protecting the health and safety of workers. The mesh screen sizes are abundant, making it suitable for a wide range of applications. Additionally, the unique SpiroKlene assembly allows for continuous cleaning of the mesh screen, reducing cleaning frequency and downtime. Its reusability also contributes to cost savings. Replacement is easy. It can be quickly removed and installed without any tools.

• filter

Logic Laser Cleaning System IMT800MV <<<< Features >>>> □ No brushing or chemical cleaning required ■ Quick transition to the cleaning process □ No waste or odor after cleaning ■ Improved performance by eliminating damage to socket pin surfaces and incomplete cleaning Unique to logic applications. ● Manual cleaning process ○ High-speed cleaning (approximately 10 seconds per socket) ● Probe card cleaning is also possible

• Molding Equipment