KEL Product Lineup

This is a backplane compliant with the PICMG 2.11 R1.0 specification. The board size is 6U type, and the system slot is of the right-side type. There are 8 slots. It is a backplane equipped with a connector for slot-in power supply.

• Other industrial robots

This is a packet-switching backplane compliant with the PICMG2.16R1.0 specification. The wiring configuration is of the dual type, and the system slot position is of the right-side type. There are 8 slots. It is equipped with connectors for slot-in power supply.

• Other industrial robots

This is a backplane compliant with the PICMG2.17R1.0 standard. The wiring configuration is centralized dual type. The system slot is of the right-side type. There are 10 slots. It is equipped with a connector for power supply that allows for the insertion of a slot-in power supply.

• Other industrial robots

This is a backplane compatible with PICMG2.11R1.0. It is possible to arrange two 3U/6U size slot-in power supplies side by side for parallel operation. The power input/output features our company's unique screw terminals.

• Other Connectors

This is a backplane compatible with PICMG2.11R1.0. It is possible to vertically arrange two 3U-sized slot-in power supplies for parallel operation. The power input/output features our proprietary screw terminals.

• Other Connectors

This is a backplane compliant with the PICMG2.11R1.0 and PICMG2.9R1.0 standards. It is a module type compatible with slot-in power supplies and is equipped with connectors for ATX power supplies, supporting our product CPCI-PS-02-F.

• Other Connectors

This is a backplane for PICMG2.0R2.1. It is of the 3U type and offers system slots in both right-side and left-side configurations. The number of slots available is 4, 6, or 8. The power supply features our proprietary screw terminal.

• Other industrial robots

This is a backplane for termination implementation compliant with the PICMG 2.0 R2.1 standard. The board size is 3U type, and it has 8 slots. There are two types of system slots: right-side type and left-side type.

• Other industrial robots

A backplane that implements an ATX power connector according to the PICMG 2.0 R2.1 specification. This allows for the use of inexpensive ATX power supplies for computers, enabling cost reduction of the equipment. The system slots are of the right-side type, with a total of 8 slots available. It also features our proprietary screw terminals.

• Other industrial robots

This is a dual-spec backplane compliant with the PICMG 2.7D0.5 standard. The board size is 6U type on the right side. There are 16 physical slots.

• Other industrial robots

This is a hot-swappable backplane compliant with the PICMG2.1R1.0 specification. It is available in configurations of 3, 4, and 8 slots. Sizes of 6U and 3U (only for 3 and 8 slots) are available.

• Other industrial robots

This is a backplane that conforms to PICMG2.5R1.0. The board size is 6U type, and there are two types of system slots: 4 and 8 slots. The system slots are of the right-side type. It incorporates specifications for both computer and telephony functions.

• Other industrial robots

This is a rear I/O adapter compliant with the PICMG 2.3 R1.0 and PICMG 2.4 R1.0 standards. The RP5 housing type is available in three types: R2.1 (Type B), with snap latch, and R3.0 specifications (Type AB).

• Other industrial robots

This is a termination board for the PICMG 2.0 R2.1 backplane. There are two types of implementation surfaces: rear side and front side, and two types of compatible systems are available for 32-bit and 64-bit.

• Other industrial robots

This is a palette-type bridge board compatible with the PCI to PCI Bridge Specification Rev. 1.0 and PICMG 2.6D0.1. It allows for the selection of system slot positions (left or right) and two types of IDSEL connection products (IDSEL = AD24 or AD25).

• Other industrial robots

This is a J1 type backplane compliant with the VMEbus Rev.C specification. We offer 12 types ranging from 3 to 21 slots. Our unique screw terminal is adopted, and the daisy chain jumper can be set from both sides of the board.

• Other industrial robots

This is a J2 type backplane compliant with the VMEbus Rev.C standard. We offer eight types ranging from 3 to 21 slots. It features our proprietary screw terminals, with column B wired for 32-bit expansion, while columns A and C are open.

• Other industrial robots

This is an I/O type backplane for the VME bus. It is designed with consideration for crosstalk and noise characteristics. It features our proprietary screw terminals.

• Other industrial robots

This is a backplane compatible with the PCI bus. The components are made in Japan, ensuring high quality and stable supply. It has 4 slots available.

• Other industrial robots

This is a backplane compatible with the ISA bus. It uses domestic components and is a series that offers high quality and stable supply. It has 4 slots available.

• Other industrial robots

This is a backplane compatible with PICMG PCI/ISA buses. It is equipped with 4 slots for PCI bus and 4 slots for ISA bus. All components used are domestically produced, ensuring high quality and stable supply.

• Other industrial robots

This is a CPCI mount-type power supply. We offer three types: 6U size ATX type, 3U size ATX type, and 3U size SFX type. The power output specifications are 300W/145W.

• Other industrial robots

This is a fan unit compatible with IEC standard 19-inch racks. We offer two types: a standard type and a sensor-equipped type. The sensor-equipped type is available in both AC and DC versions.

• Other industrial robots

This is an extension board for CPCI. We offer three types: one with only J1 and J2 implemented, one with J1, J2, J4, and J5 implemented (6U), and one with all J1 to J5 implemented (6U). The board sizes available are 3U and 6U.

• Other industrial robots

This is an extension board for VMEbus. We offer six types: for single-height J1 boards, for single-height J2 boards, for double-height boards, and for parallel connection types for single/double height. "VCR01-E/X-SJ1-F" Single-height J1 connection type "VCR01-E/X-SJ2-F" Single-height J2 connection type "VCR01-E/X-SP-F" Parallel connection type for single-height boards "VCR01-E/X-W-F" For double-height boards "VCR01-E/X-WP-F" Parallel connection type for double-height boards "VCR01-E/X-WJ1P-F" Double-height J1 parallel connection type

• Other industrial robots

This is a tool used to pull the printed circuit board out from the connector, applying the principle of leverage. Therefore, the board can be removed with a single touch. Spring pins (made of stainless steel) for mounting on each card are included.

• Other Connectors

This is a component that serves as a guide when inserting a daughterboard. It comes in various lengths and shapes, and our guide rails have a proven track record in electronic equipment system racks. We offer many patterns, including guide rails compatible with our RUGGED series, RK series, and ECR series, all of which comply with RoHS.

• Other Connectors

This is an optional panel used for the ECR series and VCR series. The panel protects the front of the bus rack. We provide a front panel with a handle and a filler panel to fill the gap. It is compatible with 3U and 6U sizes, and the front panel is available in 13 different widths.

• Other industrial robots

This is an insulating component used when installing a backplane on our ECR series racks.

• Other industrial robots