エイム Product Lineup

Due to the rise in crude oil prices and electricity costs, what companies are currently seeking the most is a "proposal that can definitely reduce electricity bills." Riduck is an energy-saving solution that improves the condition of refrigerants and lubricants, which are the causes of efficiency decline in refrigeration and air conditioning systems, achieving a reduction in power consumption (estimated at 10-20%). We are currently receiving numerous inquiries from food factories, supermarkets, and cold storage warehouses, and we are looking for companies that can introduce us.

• others

【Product Introduction】 Ridac is an energy-saving device that can be retrofitted to refrigerant piping to improve the condition of refrigerant and refrigerating oil, thereby reducing the load on compressors. It can be installed directly onto existing equipment, achieving power reduction without the need for equipment renewal. 【Features】 - Power reduction rate: 10-20% (depending on conditions) - No need for equipment renewal; retrofitted installation - No need for operational downtime - Investment recovery: 2-4 years - Proven implementation in factories and refrigeration equipment 【Energy Saving Effect Measurement】 Ridac conducts comparative analysis under the same conditions using measurement data from current loggers and external temperature data from the Meteorological Agency. This allows for the verification of reduction effects in "numerical terms rather than just intuition." *Results may vary depending on equipment usage and external temperature conditions. Due to the impact of rising crude oil prices, electricity rates continue to increase. Now, companies are seriously looking for "companies that can reduce electricity costs." Since the situation in Iran, inquiries regarding energy saving have surged, with many expressing a desire to "handle it in-house." We are seeking Ridac distributors to share the energy-saving know-how we have cultivated so far, in order to overcome this critical situation together with more companies.

• others

In the Kanto region, limited to one metropolis and six prefectures (Tokyo, Saitama, Kanagawa, Chiba, Gunma, Tochigi, and Ibaraki), we will install loggers on the power panels of the entire factory and collect electricity data for one month. We will analyze the breakdown of electricity usage, load fluctuations, and demand trends to visualize potential reductions and improvement priorities.

• others

The "Kuru Pita" easily resolves the hole positions of hold-down hardware and anchors, accommodating any misalignment of anchor bolts. Even after many years, it prevents the tenon withdrawal of columns and ensures the safety, durability, and seismic resistance of new constructions! "Kuru Pita" is a joint that allows for easy adjustment and direct connection of the misalignment between the hold-down hardware mandated by the Building Standards Act and the anchor bolts that rise from the foundation. Even in cases of maximum eccentricity, it has a capacity of 25 kN for short-term standard strength, allowing for safe installation on hold-down hardware rated for 10 to 25 kN.

• others

Riduck is an energy-saving device that can be retrofitted to improve the mechanical efficiency of commercial refrigeration and air conditioning units. By simply installing it on existing equipment, it reduces the compressor load and lowers power consumption. This allows for energy savings and CO₂ reduction while keeping equipment renewal costs down. 【Features】 ■ Can be retrofitted to existing equipment (no renewal necessary) ■ Improves mechanical efficiency of refrigeration and air conditioning units ■ Reduces electricity costs through lower power consumption ■ Extends equipment lifespan by reducing load ■ Contributes to CO₂ emission reduction 【For customers like these】 - Want to reduce electricity costs for refrigeration in the food manufacturing industry - Want to consider improvement measures before equipment renewal - Want to suppress demand increases - Concerned about increased load and aging of refrigeration units

• Other environmental equipment

The main cause of leaks from the roof is the deterioration of roofing materials. Generally used roofing materials can lead to leaks due to nail and screw holes and other forms of degradation. "The Roofin Under the Roof" is made of high-viscosity modified asphalt with a thickness of 1.3mm, which effectively seals nail and screw holes, preventing leaks and providing excellent durability. Additionally, it features a peel-and-stick adhesive layer, allowing for easy installation by simply removing the release film, with no worries about being blown away by the wind. "The Roofin Under the Roof" is a roofing material that does not leak and does not blow away.

• others

This is a seismic reinforcement kit that allows for the installation of internal walls to strengthen the building without destroying the existing floors and ceilings of wooden houses. [Features unique to Mois Kabetsuyoshi!] - Can be finished directly with plaster or wallpaper - Can accommodate openings under beams up to 400 mm - By using the "non-cutting kit for long beams," installation can be done without cutting the long beams - Excellent fire resistance, and no toxic gases are generated even when burned - Additionally, it exhibits moisture absorption, desorption, and gathering effects.

• others
• Wood products

■Strong against repeated earthquakes! After a major earthquake, aftershocks occur repeatedly. By absorbing those tremors, we reduce damage to homes. ■Maintenance-free The TRC damper has a durability of approximately 60 years. ■We conduct seismic simulation! We offer "analysis simulation" that visually explains the effects of seismic control through graphs. Please contact us if you are interested. ■Obtained technical evaluation from the Japan Building Disaster Prevention Association! We have obtained the technical evaluation from the Japan Building Disaster Prevention Association, which is necessary to receive subsidies from local governments for seismic renovations. ◎For more details, please refer to the PDF or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

"Kazoku Mamoru" is an add-on hold-down hardware that is installed on the exterior of a house. It is said that during the Great Hanshin-Awaji Earthquake, houses experienced a pulling force of 4 tons, and Kazoku Mamoru can withstand up to 4.5 tons. By securely connecting the foundation and columns, it prevents "tenon pull-out" and "separation," thereby mitigating damage from natural disasters such as earthquakes and tsunamis. It helps prevent the collapse of houses and protects important homes and families. Since it can be installed without breaking walls, it shortens construction time. Another feature is that it fixes the hardware to the columns with screws, resulting in less burden on the columns. *For more details, please download the catalog or contact us.*

• others

"Inochimamoru" is an add-on hold-down device that is installed from the outside of existing homes. By securing the foundation and columns together, it prevents "tenon pull-out," one of the main causes of collapse during major earthquakes, thereby protecting the structure from falling. ◇ It can withstand a pulling force of up to 7.36 tons! When installed on a reinforced concrete foundation (with a concrete compressive strength of 13 N/mm²), it has been experimentally proven to withstand a maximum pulling force of 7.36 tons on the columns. * The strength may decrease depending on the foundation's strength and the presence of rebar. ◇ It can be installed at a low cost Since it can be installed without cutting the walls, the cost is about 1/4 to 1/5 compared to cases where walls need to be cut. ◇ We offer covers that match the exterior walls There are upper and lower covers available, and you can choose from a total of four colors: hairline, ivory, brown, and beige. All are made of stainless steel, and the paint is baked on, providing excellent durability.

• others

- This is a seismic reinforcement kit that allows for the installation of internal walls to strengthen the building without damaging the existing floors and ceilings of wooden houses. - All necessary surface materials and screws for reinforcement are included in the set. There is no need to order screws individually; please order one set for each panel. - The seismic board is equipped with various specifications (large wall, true wall, post-installed columns) to accommodate different construction situations. - It has obtained a technical evaluation from the Japan Architectural Disaster Prevention Association (Evaluation Number DPA-Ju-13-2). - Since large-scale ancillary work, such as exterior wall reinforcement, is not required, it achieves a cost reduction of 1/2 to 1/3 compared to exterior wall reinforcement.

• others
• Wood products

- Due to its porous nature, it has breathability, water absorption, odor absorption, and adsorption properties. - Moisture is retained within the charcoal due to capillary condensation in the fine pores. - It has an alkaline nature and acts to regulate mold and microorganisms. - It does not granulate much in a static state. - There is no expansion due to absorption. - Charcoal is not decomposed by microorganisms, nor is there any leaching by water.

• others
• Wood products