ゼストロンジャパン List of Products and Services

VIGON SC 200 is a room temperature water-based cleaning agent developed for cleaning metal masks. It is suitable for spray and ultrasonic cleaning machines and can also be used for cleaning test print circuit boards. Depending on the type of flux, it can be used on printed circuit boards that have already been soldered on one side due to printing errors. 【Features】 - It can separate and remove flux from the cleaning solution, extending the life of the cleaning solution and reducing costs. - No need to replace the cleaning solution, which simplifies maintenance. - Improved workability and environmental conservation achieved through low odor, low VOC, and environmentally friendly components. - Safe line management due to no flash point. - Excellent cleaning performance at room temperature (25°C). - Superior cleaning ability for Pb-free, halogen-free, and eutectic solders. *For more details, please refer to the PDF document or feel free to contact us.

VIGON UC 160 is a water-based cleaning agent specially designed for use in printers to remove cream solder from metal masks. It has excellent wettability on non-woven fabrics, improving cleaning performance and significantly reducing the residue around the cream solder. As a result, it can suppress solder bridges on the circuit board, leading to reliable printing results. Additionally, it is ideal as a substitute for IPA due to its excellent health and safety properties. 【Features】 ■ Cleaning of the back of metal masks in printers ■ Environmentally friendly and highly safe water-based cleaning ■ No negative impact on paste printability ■ Cost benefits from reduced paper usage ■ Reduced defect rates due to high cleaning performance *For more details, please refer to the PDF document or feel free to contact us.

VIGON SC 202 is a water-based cleaning agent that reliably removes cream solder and SMT bond in metal mask cleaning. It is also excellent for cleaning printed circuit boards with printing errors. It is recommended for use with spray cleaning machines and ultrasonic cleaning machines. 【Features】 ■ Effectively removes resin, adhesives, inks, solder paste, and flux residues ■ No flash point due to being a water-based cleaning agent, no explosion-proof specifications required ■ Can clean and rinse with a single solution ■ Free of surfactants ■ Contains no halogen compounds *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Metal Mask Wipes for Hand Drying." These hand wipes excel in cleaning performance, usability, and safety. They can effectively clean hard-to-reach openings with wipes that are impregnated with VIGON SC 200. Additionally, they are characterized by their durability, resistance to tearing, and low linting, making them a highly safe product with no applicable GHS labeling. 【Features】 ■ Excellent cleaning performance, usability, and safety ■ No dripping, with superior drying properties ■ Durable, tear-resistant, and low linting ■ Cleanup involves simply disposing of the wipe *For more details, please refer to the PDF document or feel free to contact us.

The "VIGON SC 210" is a water-based cleaning agent specifically designed for cleaning SMT adhesives and metal masks. Based on MPC technology, it can reliably remove cream solder and SMT adhesives in a single process even at a low temperature of 18°C. Depending on the type of flux, it can also be used to clean misprinted circuit boards. Furthermore, it can remove adhesives from fixtures (especially dispenser nozzles) and is designed for spray cleaning and ultrasonic cleaning applications. 【Features】 - Stable and excellent cleaning performance in the temperature range of 18-40°C - Contains no surfactants, leaving no residue on circuit boards or inside equipment - Excellent material compatibility - Non-foaming, low odor, with no organic residue left in the rinsing process - Can also be used to remove adhesives from fixtures and dispenser nozzles *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our water-based cleaning agent for conductive paste, 'VIGON TC 150'. This product is specially designed to remove silicone-based and silicone-free conductive pastes, as well as silver and aluminum conductive pastes, from metal masks and screen plates. It can also be used for the removal of silver sintered paste. 【Features】 ■ Excellent cleaning performance for conductive pastes ■ Capable of removing silver sintered paste from metal masks and screen plates ■ A water-based cleaning agent that can replace traditional solvent-based cleaners ■ Improves health and safety for operators due to being water-based ■ Can be used in spray equipment without explosion-proof specifications as it has no flash point *For more details, please refer to the PDF document or feel free to contact us.

"ZESTRON SD 100" is a solvent-based cleaning agent specially designed for removing cream solder from metal masks, using an explosion-proof spray-type cleaning machine. Depending on the type of flux, it can also be used on misprinted circuit boards. Furthermore, it can be used for back wiping in printing machines and for manual wiping cleaning. Additionally, this product has been approved for use by major manufacturers worldwide in metal mask printers. 【Features】 ■ High contamination retention, leading to long life and reduced maintenance time ■ Excellent drying properties, contributing to shorter cleaning times ■ Low odor, suitable for use at room temperature ■ Suitable for manual wiping cleaning of metal masks and back wiping in printing machines *For more details, please refer to the PDF document or feel free to contact us.

"ZESTRON SD 301" is a solvent-based cleaning agent for removing cream solder, SMT adhesives, and thick film pastes using explosion-proof spray cleaning machines from metal masks and screens. It has quick-drying properties, allowing for a reduction in the cleaning process time. It is also effective for cleaning printed circuit boards with printing errors. Due to its high flash point, it can be used for hand wipe cleaning and backside wiping on printing machines. 【Features】 ■ Capable of removing flux residues ■ Long lifespan and reduced cleaning costs due to high contamination retention capability ■ Very fast drying time, enabling a reduction in the cleaning process ■ Usable at room temperature *For more details, please refer to the PDF document or feel free to contact us.

The "HYDRON SC 300" is a water-based cleaning agent developed for cleaning metal masks. It reliably removes cream solder and SMT adhesives at room temperature without leaving any residue on the surface of the metal mask. Additionally, it can be used in both the cleaning and rinsing processes, dries without leaving any cleaning agent residue, and can also be used for wiping the back of printing machines. 【Features】 ■ Exhibits excellent effectiveness in cleaning cream solder and adhesives, leaving no residue ■ Usable in both cleaning and rinsing processes ■ Dries without leaving residue on the metal mask ■ Does not foam even when using a spray cleaning machine ■ Contains less than 20% VOC, implementing environmental measures ■ Excellent material compatibility with metal masks *For more details, please refer to the PDF document or feel free to contact us.

This page provides an explanation of the key points to consider in metal mask cleaning. By selecting the appropriate cleaning agents and methods, it is possible to improve cleaning efficiency and work productivity, as well as reduce running costs, ensure worker safety, and implement environmentally considerate cleaning practices. Please check again. *For more details, you can view them through the related links. For further information, please refer to the PDF materials or feel free to contact us.

We would like to introduce the "Cleaning Test" conducted by Zestron Japan Co., Ltd. From our technical center, you can choose a device that meets your requirements from our inline and batch-type spray, jet, and ultrasonic equipment, and try cleaning workpieces under conditions equivalent to those in a production environment using spray or immersion processes (ultrasonic or jet). Our engineers will propose suitable cleaning equipment, and while conducting the cleaning test, we will analyze the cleanliness at our analysis center. 【Test Flow (Partial)】 ■1. Hearing ■2. Cleaning Test ■3. Cleanliness Analysis ■4. Report Submission *The PDF document is a company brochure.

"ZESTRON SW" is a solvent-based cleaning agent with a high flash point, developed in collaboration with major SMT printer manufacturers, and can be used without vacuum drying. It excels in the reproducibility of cleaning results and improves the reliability of the printing process as it leaves no residue after drying. Unlike isopropanol (IPA, flash point: 12°C), this product (flash point: 67°C) significantly enhances safety during the operation of metal mask printers. 【Features】 ■ Dries quickly on the metal mask after wiping with a dry non-woven cloth, leaving no residue ■ Leads to good printing stability and a reduction in solder balls ■ Reduces the frequency of cleaning cycles ■ Biodegradable ■ Approved for use in SMT printers by major manufacturers worldwide *For more details, please refer to the PDF document or feel free to contact us.