土佐電子 Product Lineup

This product is a motor amplifier board that can drive higher output motors by connecting it to a PWM output motor control board. By connecting a motor (9-18V) to the control board, it can be driven by PWM. *This product is a board that requires soldering the wiring from the power supply and to the motor to the terminals on the circuit board. 【Specifications】 ■ Power Supply Voltage (VIN): 12V specification: 9-18V ■ Motor Drive Voltage: 0-VIN V ■ Maximum Output Current: 80A ■ Continuous Output Current: 30A ■ PWM Signal Input Voltage Range: Low level 0-0.8V, High level 4-24V ■ PWM Input OFF time: 15μs or more (an OFF time of 15μs or more is required for PWM) *For more details, please refer to the PDF documentation or feel free to contact us.

This product is a control board that can control up to 4 motors. By simply sending a 15-digit command from a PC, each motor can be controlled independently. It is also suitable for learning control programs using PIC microcontrollers. You can also use it for learning command transmission programs. 【Features】 ■ Equipped with RS-232C interface ■ Each motor can be controlled from a computer ■ Comes with our original control program ■ Uses PIC16F877 as the control microcontroller ■ Programming language is ANSI compliant C language *For more details, please refer to the PDF document or feel free to contact us.

The "V1.0X" is a circuit board that performs motor drive control by receiving PWM signals from external sources such as microcontrollers. The power supply voltage is 10-45V. The output current is 3A at peak and approximately 1.5A on average. The board size is 41×60×21(mm). 【Specifications】 ■ Power Supply Voltage (VIN): 10-45V ■ Mounted FET: TB6568KQ (Toshiba Bi-CMOS Integrated Circuit) ■ PWM Signal Voltage: 0-5V ■ Output Current (peak): 3A ■ Output Current (average): ~1.5A ■ Board Size: 41×60×21(mm) ■ Mounting Hole Size: M3 screw compatible, hole pitch 34×50(mm) *For more details, please refer to the PDF document or feel free to contact us.

The "V2.0" is a motor driver board for a 2-channel drive model. It can perform motor drive control by receiving PWM signals from external sources such as microcontrollers. The power supply voltage is 3 to 27V. The continuous output current is 3A, and the instantaneous maximum current is 4.5A for 100ms. The board size is 40×56×27(mm). 【Specifications】 ■ Power supply voltage (VIN): 3 to 27V ■ Mounted FET: 2 TA8429HQ (Toshiba bipolar linear integrated circuit) ■ PWM signal voltage: 0 to VCC ■ Continuous output current: 3A ■ Instantaneous maximum current: 4.5A for 100ms ■ Board size: 40×56×27(mm) ■ Mounting hole size: M3 screw compatible, hole pitch 34×50(mm) *For more details, please refer to the PDF document or feel free to contact us.

The "V1.0" is a circuit board that performs motor drive control by receiving PWM signals from external sources such as microcontrollers. The power supply voltage is 3 to 27V. The continuous output current is 3A, and the instantaneous maximum current is 4.5A for 100ms. The board size is 30×56×27(mm). 【Specifications】 ■ Power supply voltage (VIN): 3 to 27V ■ Mounted FET: TA8429HQ (Toshiba bipolar linear integrated circuit) 1 unit ■ PWM signal voltage: 0 to VCC ■ Continuous output current: 3A ■ Instantaneous maximum current: 4.5A for 100ms ■ Board size: 30×56×27(mm) ■ Mounting hole size: Compatible with M3 screws, hole pitch 24×50(mm) *For more details, please refer to the PDF document or feel free to contact us.

This product is a "motor driver IC" with a heat sink already attached. It is sold individually. Please purchase the required quantity (up to 4 can be mounted). Additionally, we ask that you install the product yourself (soldering). *For more details, please refer to the PDF document or feel free to contact us.

Our company has established a factory in Vietnam since 2006 and is engaged in the EMS business. The docking of a young and abundant workforce with Japanese technology is realized by our Japanese staff stationed there, allowing us to provide reliable products at reasonable costs. 【Business Content】 ■ Processing, assembly, and manufacturing of electronic components 【Main Products】 ■ Optical devices, image stabilization units, thermo modules, oxygen sensors ■ Various substrate processing (oxygen sensors, protection circuits, circuit unit substrates) *For more details, please refer to the PDF document or feel free to contact us.

This product is a motor amplifier board that can drive higher output motors by connecting it to a PWM output motor control board. By connecting a motor (18-36V, 80A maximum) to the control board, it can be driven with PWM. *This product is a board that requires soldering the wiring from the power supply and to the motor onto the terminals on the circuit board. 【Specifications】 ■ Power Supply Voltage (VIN): 24V specification: 18-36V ■ Motor Drive Voltage: 0 to VIN V ■ Maximum Output Current: 80A ■ Continuous Output Current: 30A ■ PWM Signal Input Voltage Range: Low level 0-0.8V, High level 4-24V ■ PWM Input OFF time: 15μs or more (PWM OFF time of 15μs or more is required) *For more details, please refer to the PDF document or feel free to contact us.

Our company has established a factory in Vietnam since 2006 and is engaged in the EMS business. The docking of a young and abundant workforce with Japanese technology is realized by our Japanese staff stationed there, allowing us to provide reliable products at reasonable costs. 【Business Content】 ■ Processing, assembly, and manufacturing of electronic components 【Main Products】 ■ Optical devices, image stabilization units, thermo modules, oxygen sensors ■ Various substrate processing (oxygen sensors, protection circuits, circuit unit substrates) *For more details, please refer to the PDF document or feel free to contact us.